mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-28 22:13:08 +00:00
089ffd0aed
Now clock and reset drivers are available for respective SoC's so use clk and reset ops on phy driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Marek Vasut <marex@denx.de>
608 lines
15 KiB
C
608 lines
15 KiB
C
/*
|
|
* Allwinner sun4i USB PHY driver
|
|
*
|
|
* Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com>
|
|
* Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
|
|
* Copyright (C) 2014 Roman Byshko <rbyshko@gmail.com>
|
|
*
|
|
* Modelled arch/arm/mach-sunxi/usb_phy.c to compatible with generic-phy.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <dm/device.h>
|
|
#include <generic-phy.h>
|
|
#include <phy-sun4i-usb.h>
|
|
#include <reset.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/cpu.h>
|
|
|
|
#define REG_ISCR 0x00
|
|
#define REG_PHYCTL_A10 0x04
|
|
#define REG_PHYBIST 0x08
|
|
#define REG_PHYTUNE 0x0c
|
|
#define REG_PHYCTL_A33 0x10
|
|
#define REG_PHY_OTGCTL 0x20
|
|
#define REG_PMU_UNK1 0x10
|
|
|
|
/* Common Control Bits for Both PHYs */
|
|
#define PHY_PLL_BW 0x03
|
|
#define PHY_RES45_CAL_EN 0x0c
|
|
|
|
/* Private Control Bits for Each PHY */
|
|
#define PHY_TX_AMPLITUDE_TUNE 0x20
|
|
#define PHY_TX_SLEWRATE_TUNE 0x22
|
|
#define PHY_DISCON_TH_SEL 0x2a
|
|
#define PHY_SQUELCH_DETECT 0x3c
|
|
|
|
#define PHYCTL_DATA BIT(7)
|
|
#define OTGCTL_ROUTE_MUSB BIT(0)
|
|
|
|
#define PHY_TX_RATE BIT(4)
|
|
#define PHY_TX_MAGNITUDE BIT(2)
|
|
#define PHY_TX_AMPLITUDE_LEN 5
|
|
|
|
#define PHY_RES45_CAL_DATA BIT(0)
|
|
#define PHY_RES45_CAL_LEN 1
|
|
#define PHY_DISCON_TH_LEN 2
|
|
|
|
#define SUNXI_AHB_ICHR8_EN BIT(10)
|
|
#define SUNXI_AHB_INCR4_BURST_EN BIT(9)
|
|
#define SUNXI_AHB_INCRX_ALIGN_EN BIT(8)
|
|
#define SUNXI_ULPI_BYPASS_EN BIT(0)
|
|
|
|
/* A83T specific control bits for PHY0 */
|
|
#define PHY_CTL_VBUSVLDEXT BIT(5)
|
|
#define PHY_CTL_SIDDQ BIT(3)
|
|
|
|
/* A83T specific control bits for PHY2 HSIC */
|
|
#define SUNXI_EHCI_HS_FORCE BIT(20)
|
|
#define SUNXI_HSIC_CONNECT_INT BIT(16)
|
|
#define SUNXI_HSIC BIT(1)
|
|
|
|
#define MAX_PHYS 4
|
|
|
|
enum sun4i_usb_phy_type {
|
|
sun4i_a10_phy,
|
|
sun6i_a31_phy,
|
|
sun8i_a33_phy,
|
|
sun8i_a83t_phy,
|
|
sun8i_h3_phy,
|
|
sun8i_v3s_phy,
|
|
sun50i_a64_phy,
|
|
};
|
|
|
|
struct sun4i_usb_phy_cfg {
|
|
int num_phys;
|
|
enum sun4i_usb_phy_type type;
|
|
u32 disc_thresh;
|
|
u8 phyctl_offset;
|
|
bool dedicated_clocks;
|
|
bool enable_pmu_unk1;
|
|
bool phy0_dual_route;
|
|
};
|
|
|
|
struct sun4i_usb_phy_info {
|
|
const char *gpio_vbus;
|
|
const char *gpio_vbus_det;
|
|
const char *gpio_id_det;
|
|
} phy_info[] = {
|
|
{
|
|
.gpio_vbus = CONFIG_USB0_VBUS_PIN,
|
|
.gpio_vbus_det = CONFIG_USB0_VBUS_DET,
|
|
.gpio_id_det = CONFIG_USB0_ID_DET,
|
|
},
|
|
{
|
|
.gpio_vbus = CONFIG_USB1_VBUS_PIN,
|
|
.gpio_vbus_det = NULL,
|
|
.gpio_id_det = NULL,
|
|
},
|
|
{
|
|
.gpio_vbus = CONFIG_USB2_VBUS_PIN,
|
|
.gpio_vbus_det = NULL,
|
|
.gpio_id_det = NULL,
|
|
},
|
|
{
|
|
.gpio_vbus = CONFIG_USB3_VBUS_PIN,
|
|
.gpio_vbus_det = NULL,
|
|
.gpio_id_det = NULL,
|
|
},
|
|
};
|
|
|
|
struct sun4i_usb_phy_plat {
|
|
void __iomem *pmu;
|
|
int power_on_count;
|
|
int gpio_vbus;
|
|
int gpio_vbus_det;
|
|
int gpio_id_det;
|
|
struct clk clocks;
|
|
struct reset_ctl resets;
|
|
int id;
|
|
};
|
|
|
|
struct sun4i_usb_phy_data {
|
|
void __iomem *base;
|
|
const struct sun4i_usb_phy_cfg *cfg;
|
|
struct sun4i_usb_phy_plat *usb_phy;
|
|
};
|
|
|
|
static int initial_usb_scan_delay = CONFIG_INITIAL_USB_SCAN_DELAY;
|
|
|
|
static void sun4i_usb_phy_write(struct phy *phy, u32 addr, u32 data, int len)
|
|
{
|
|
struct sun4i_usb_phy_data *phy_data = dev_get_priv(phy->dev);
|
|
struct sun4i_usb_phy_plat *usb_phy = &phy_data->usb_phy[phy->id];
|
|
u32 temp, usbc_bit = BIT(usb_phy->id * 2);
|
|
void __iomem *phyctl = phy_data->base + phy_data->cfg->phyctl_offset;
|
|
int i;
|
|
|
|
if (phy_data->cfg->phyctl_offset == REG_PHYCTL_A33) {
|
|
/* SoCs newer than A33 need us to set phyctl to 0 explicitly */
|
|
writel(0, phyctl);
|
|
}
|
|
|
|
for (i = 0; i < len; i++) {
|
|
temp = readl(phyctl);
|
|
|
|
/* clear the address portion */
|
|
temp &= ~(0xff << 8);
|
|
|
|
/* set the address */
|
|
temp |= ((addr + i) << 8);
|
|
writel(temp, phyctl);
|
|
|
|
/* set the data bit and clear usbc bit*/
|
|
temp = readb(phyctl);
|
|
if (data & 0x1)
|
|
temp |= PHYCTL_DATA;
|
|
else
|
|
temp &= ~PHYCTL_DATA;
|
|
temp &= ~usbc_bit;
|
|
writeb(temp, phyctl);
|
|
|
|
/* pulse usbc_bit */
|
|
temp = readb(phyctl);
|
|
temp |= usbc_bit;
|
|
writeb(temp, phyctl);
|
|
|
|
temp = readb(phyctl);
|
|
temp &= ~usbc_bit;
|
|
writeb(temp, phyctl);
|
|
|
|
data >>= 1;
|
|
}
|
|
}
|
|
|
|
static void sun4i_usb_phy_passby(struct phy *phy, bool enable)
|
|
{
|
|
struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
|
|
struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
|
|
u32 bits, reg_value;
|
|
|
|
if (!usb_phy->pmu)
|
|
return;
|
|
|
|
bits = SUNXI_AHB_ICHR8_EN | SUNXI_AHB_INCR4_BURST_EN |
|
|
SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN;
|
|
|
|
/* A83T USB2 is HSIC */
|
|
if (data->cfg->type == sun8i_a83t_phy && usb_phy->id == 2)
|
|
bits |= SUNXI_EHCI_HS_FORCE | SUNXI_HSIC_CONNECT_INT |
|
|
SUNXI_HSIC;
|
|
|
|
reg_value = readl(usb_phy->pmu);
|
|
|
|
if (enable)
|
|
reg_value |= bits;
|
|
else
|
|
reg_value &= ~bits;
|
|
|
|
writel(reg_value, usb_phy->pmu);
|
|
}
|
|
|
|
static int sun4i_usb_phy_power_on(struct phy *phy)
|
|
{
|
|
struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
|
|
struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
|
|
|
|
if (initial_usb_scan_delay) {
|
|
mdelay(initial_usb_scan_delay);
|
|
initial_usb_scan_delay = 0;
|
|
}
|
|
|
|
usb_phy->power_on_count++;
|
|
if (usb_phy->power_on_count != 1)
|
|
return 0;
|
|
|
|
if (usb_phy->gpio_vbus >= 0)
|
|
gpio_set_value(usb_phy->gpio_vbus, SUNXI_GPIO_PULL_UP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun4i_usb_phy_power_off(struct phy *phy)
|
|
{
|
|
struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
|
|
struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
|
|
|
|
usb_phy->power_on_count--;
|
|
if (usb_phy->power_on_count != 0)
|
|
return 0;
|
|
|
|
if (usb_phy->gpio_vbus >= 0)
|
|
gpio_set_value(usb_phy->gpio_vbus, SUNXI_GPIO_PULL_DISABLE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sun4i_usb_phy0_reroute(struct sun4i_usb_phy_data *data, bool id_det)
|
|
{
|
|
u32 regval;
|
|
|
|
regval = readl(data->base + REG_PHY_OTGCTL);
|
|
if (!id_det) {
|
|
/* Host mode. Route phy0 to EHCI/OHCI */
|
|
regval &= ~OTGCTL_ROUTE_MUSB;
|
|
} else {
|
|
/* Peripheral mode. Route phy0 to MUSB */
|
|
regval |= OTGCTL_ROUTE_MUSB;
|
|
}
|
|
writel(regval, data->base + REG_PHY_OTGCTL);
|
|
}
|
|
|
|
static int sun4i_usb_phy_init(struct phy *phy)
|
|
{
|
|
struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
|
|
struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = clk_enable(&usb_phy->clocks);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable usb_%ldphy clock\n", phy->id);
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_deassert(&usb_phy->resets);
|
|
if (ret) {
|
|
dev_err(dev, "failed to deassert usb_%ldreset reset\n", phy->id);
|
|
return ret;
|
|
}
|
|
|
|
if (data->cfg->type == sun8i_a83t_phy) {
|
|
if (phy->id == 0) {
|
|
val = readl(data->base + data->cfg->phyctl_offset);
|
|
val |= PHY_CTL_VBUSVLDEXT;
|
|
val &= ~PHY_CTL_SIDDQ;
|
|
writel(val, data->base + data->cfg->phyctl_offset);
|
|
}
|
|
} else {
|
|
if (usb_phy->pmu && data->cfg->enable_pmu_unk1) {
|
|
val = readl(usb_phy->pmu + REG_PMU_UNK1);
|
|
writel(val & ~2, usb_phy->pmu + REG_PMU_UNK1);
|
|
}
|
|
|
|
if (usb_phy->id == 0)
|
|
sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN,
|
|
PHY_RES45_CAL_DATA,
|
|
PHY_RES45_CAL_LEN);
|
|
|
|
/* Adjust PHY's magnitude and rate */
|
|
sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE,
|
|
PHY_TX_MAGNITUDE | PHY_TX_RATE,
|
|
PHY_TX_AMPLITUDE_LEN);
|
|
|
|
/* Disconnect threshold adjustment */
|
|
sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
|
|
data->cfg->disc_thresh, PHY_DISCON_TH_LEN);
|
|
}
|
|
|
|
sun4i_usb_phy_passby(phy, true);
|
|
|
|
sun4i_usb_phy0_reroute(data, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun4i_usb_phy_exit(struct phy *phy)
|
|
{
|
|
struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
|
|
struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
|
|
int ret;
|
|
|
|
if (phy->id == 0) {
|
|
if (data->cfg->type == sun8i_a83t_phy) {
|
|
void __iomem *phyctl = data->base +
|
|
data->cfg->phyctl_offset;
|
|
|
|
writel(readl(phyctl) | PHY_CTL_SIDDQ, phyctl);
|
|
}
|
|
}
|
|
|
|
sun4i_usb_phy_passby(phy, false);
|
|
|
|
ret = clk_disable(&usb_phy->clocks);
|
|
if (ret) {
|
|
dev_err(dev, "failed to disable usb_%ldphy clock\n", phy->id);
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_assert(&usb_phy->resets);
|
|
if (ret) {
|
|
dev_err(dev, "failed to assert usb_%ldreset reset\n", phy->id);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun4i_usb_phy_xlate(struct phy *phy,
|
|
struct ofnode_phandle_args *args)
|
|
{
|
|
struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
|
|
|
|
if (args->args_count >= data->cfg->num_phys)
|
|
return -EINVAL;
|
|
|
|
if (args->args_count)
|
|
phy->id = args->args[0];
|
|
else
|
|
phy->id = 0;
|
|
|
|
debug("%s: phy_id = %ld\n", __func__, phy->id);
|
|
return 0;
|
|
}
|
|
|
|
int sun4i_usb_phy_vbus_detect(struct phy *phy)
|
|
{
|
|
struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
|
|
struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
|
|
int err, retries = 3;
|
|
|
|
debug("%s: id_det = %d\n", __func__, usb_phy->gpio_id_det);
|
|
|
|
if (usb_phy->gpio_vbus_det < 0)
|
|
return usb_phy->gpio_vbus_det;
|
|
|
|
err = gpio_get_value(usb_phy->gpio_vbus_det);
|
|
/*
|
|
* Vbus may have been provided by the board and just been turned of
|
|
* some milliseconds ago on reset, what we're measuring then is a
|
|
* residual charge on Vbus, sleep a bit and try again.
|
|
*/
|
|
while (err > 0 && retries--) {
|
|
mdelay(100);
|
|
err = gpio_get_value(usb_phy->gpio_vbus_det);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
int sun4i_usb_phy_id_detect(struct phy *phy)
|
|
{
|
|
struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
|
|
struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
|
|
|
|
debug("%s: id_det = %d\n", __func__, usb_phy->gpio_id_det);
|
|
|
|
if (usb_phy->gpio_id_det < 0)
|
|
return usb_phy->gpio_id_det;
|
|
|
|
return gpio_get_value(usb_phy->gpio_id_det);
|
|
}
|
|
|
|
void sun4i_usb_phy_set_squelch_detect(struct phy *phy, bool enabled)
|
|
{
|
|
sun4i_usb_phy_write(phy, PHY_SQUELCH_DETECT, enabled ? 0 : 2, 2);
|
|
}
|
|
|
|
static struct phy_ops sun4i_usb_phy_ops = {
|
|
.of_xlate = sun4i_usb_phy_xlate,
|
|
.init = sun4i_usb_phy_init,
|
|
.power_on = sun4i_usb_phy_power_on,
|
|
.power_off = sun4i_usb_phy_power_off,
|
|
.exit = sun4i_usb_phy_exit,
|
|
};
|
|
|
|
static int sun4i_usb_phy_probe(struct udevice *dev)
|
|
{
|
|
struct sun4i_usb_phy_plat *plat = dev_get_platdata(dev);
|
|
struct sun4i_usb_phy_data *data = dev_get_priv(dev);
|
|
int i, ret;
|
|
|
|
data->cfg = (const struct sun4i_usb_phy_cfg *)dev_get_driver_data(dev);
|
|
if (!data->cfg)
|
|
return -EINVAL;
|
|
|
|
data->base = (void __iomem *)devfdt_get_addr_name(dev, "phy_ctrl");
|
|
if (IS_ERR(data->base))
|
|
return PTR_ERR(data->base);
|
|
|
|
data->usb_phy = plat;
|
|
for (i = 0; i < data->cfg->num_phys; i++) {
|
|
struct sun4i_usb_phy_plat *phy = &plat[i];
|
|
struct sun4i_usb_phy_info *info = &phy_info[i];
|
|
char name[16];
|
|
|
|
phy->gpio_vbus = sunxi_name_to_gpio(info->gpio_vbus);
|
|
if (phy->gpio_vbus >= 0) {
|
|
ret = gpio_request(phy->gpio_vbus, "usb_vbus");
|
|
if (ret)
|
|
return ret;
|
|
ret = gpio_direction_output(phy->gpio_vbus, 0);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
phy->gpio_vbus_det = sunxi_name_to_gpio(info->gpio_vbus_det);
|
|
if (phy->gpio_vbus_det >= 0) {
|
|
ret = gpio_request(phy->gpio_vbus_det, "usb_vbus_det");
|
|
if (ret)
|
|
return ret;
|
|
ret = gpio_direction_input(phy->gpio_vbus_det);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
phy->gpio_id_det = sunxi_name_to_gpio(info->gpio_id_det);
|
|
if (phy->gpio_id_det >= 0) {
|
|
ret = gpio_request(phy->gpio_id_det, "usb_id_det");
|
|
if (ret)
|
|
return ret;
|
|
ret = gpio_direction_input(phy->gpio_id_det);
|
|
if (ret)
|
|
return ret;
|
|
sunxi_gpio_set_pull(phy->gpio_id_det, SUNXI_GPIO_PULL_UP);
|
|
}
|
|
|
|
if (data->cfg->dedicated_clocks)
|
|
snprintf(name, sizeof(name), "usb%d_phy", i);
|
|
else
|
|
strlcpy(name, "usb_phy", sizeof(name));
|
|
|
|
ret = clk_get_by_name(dev, name, &phy->clocks);
|
|
if (ret) {
|
|
dev_err(dev, "failed to get usb%d_phy clock phandle\n", i);
|
|
return ret;
|
|
}
|
|
|
|
snprintf(name, sizeof(name), "usb%d_reset", i);
|
|
ret = reset_get_by_name(dev, name, &phy->resets);
|
|
if (ret) {
|
|
dev_err(dev, "failed to get usb%d_reset reset phandle\n", i);
|
|
return ret;
|
|
}
|
|
|
|
if (i || data->cfg->phy0_dual_route) {
|
|
snprintf(name, sizeof(name), "pmu%d", i);
|
|
phy->pmu = (void __iomem *)devfdt_get_addr_name(dev, name);
|
|
if (IS_ERR(phy->pmu))
|
|
return PTR_ERR(phy->pmu);
|
|
}
|
|
|
|
phy->id = i;
|
|
};
|
|
|
|
debug("Allwinner Sun4I USB PHY driver loaded\n");
|
|
return 0;
|
|
}
|
|
|
|
static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
|
|
.num_phys = 3,
|
|
.type = sun4i_a10_phy,
|
|
.disc_thresh = 3,
|
|
.phyctl_offset = REG_PHYCTL_A10,
|
|
.dedicated_clocks = false,
|
|
.enable_pmu_unk1 = false,
|
|
};
|
|
|
|
static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
|
|
.num_phys = 2,
|
|
.type = sun4i_a10_phy,
|
|
.disc_thresh = 2,
|
|
.phyctl_offset = REG_PHYCTL_A10,
|
|
.dedicated_clocks = false,
|
|
.enable_pmu_unk1 = false,
|
|
};
|
|
|
|
static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
|
|
.num_phys = 3,
|
|
.type = sun6i_a31_phy,
|
|
.disc_thresh = 3,
|
|
.phyctl_offset = REG_PHYCTL_A10,
|
|
.dedicated_clocks = true,
|
|
.enable_pmu_unk1 = false,
|
|
};
|
|
|
|
static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
|
|
.num_phys = 3,
|
|
.type = sun4i_a10_phy,
|
|
.disc_thresh = 2,
|
|
.phyctl_offset = REG_PHYCTL_A10,
|
|
.dedicated_clocks = false,
|
|
.enable_pmu_unk1 = false,
|
|
};
|
|
|
|
static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
|
|
.num_phys = 2,
|
|
.type = sun4i_a10_phy,
|
|
.disc_thresh = 3,
|
|
.phyctl_offset = REG_PHYCTL_A10,
|
|
.dedicated_clocks = true,
|
|
.enable_pmu_unk1 = false,
|
|
};
|
|
|
|
static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
|
|
.num_phys = 2,
|
|
.type = sun8i_a33_phy,
|
|
.disc_thresh = 3,
|
|
.phyctl_offset = REG_PHYCTL_A33,
|
|
.dedicated_clocks = true,
|
|
.enable_pmu_unk1 = false,
|
|
};
|
|
|
|
static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = {
|
|
.num_phys = 3,
|
|
.type = sun8i_a83t_phy,
|
|
.phyctl_offset = REG_PHYCTL_A33,
|
|
.dedicated_clocks = true,
|
|
};
|
|
|
|
static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
|
|
.num_phys = 4,
|
|
.type = sun8i_h3_phy,
|
|
.disc_thresh = 3,
|
|
.phyctl_offset = REG_PHYCTL_A33,
|
|
.dedicated_clocks = true,
|
|
.enable_pmu_unk1 = true,
|
|
.phy0_dual_route = true,
|
|
};
|
|
|
|
static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = {
|
|
.num_phys = 1,
|
|
.type = sun8i_v3s_phy,
|
|
.disc_thresh = 3,
|
|
.phyctl_offset = REG_PHYCTL_A33,
|
|
.dedicated_clocks = true,
|
|
.enable_pmu_unk1 = true,
|
|
.phy0_dual_route = true,
|
|
};
|
|
|
|
static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
|
|
.num_phys = 2,
|
|
.type = sun50i_a64_phy,
|
|
.disc_thresh = 3,
|
|
.phyctl_offset = REG_PHYCTL_A33,
|
|
.dedicated_clocks = true,
|
|
.enable_pmu_unk1 = true,
|
|
.phy0_dual_route = true,
|
|
};
|
|
|
|
static const struct udevice_id sun4i_usb_phy_ids[] = {
|
|
{ .compatible = "allwinner,sun4i-a10-usb-phy", .data = (ulong)&sun4i_a10_cfg },
|
|
{ .compatible = "allwinner,sun5i-a13-usb-phy", .data = (ulong)&sun5i_a13_cfg },
|
|
{ .compatible = "allwinner,sun6i-a31-usb-phy", .data = (ulong)&sun6i_a31_cfg },
|
|
{ .compatible = "allwinner,sun7i-a20-usb-phy", .data = (ulong)&sun7i_a20_cfg },
|
|
{ .compatible = "allwinner,sun8i-a23-usb-phy", .data = (ulong)&sun8i_a23_cfg },
|
|
{ .compatible = "allwinner,sun8i-a33-usb-phy", .data = (ulong)&sun8i_a33_cfg },
|
|
{ .compatible = "allwinner,sun8i-a83t-usb-phy", .data = (ulong)&sun8i_a83t_cfg },
|
|
{ .compatible = "allwinner,sun8i-h3-usb-phy", .data = (ulong)&sun8i_h3_cfg },
|
|
{ .compatible = "allwinner,sun8i-v3s-usb-phy", .data = (ulong)&sun8i_v3s_cfg },
|
|
{ .compatible = "allwinner,sun50i-a64-usb-phy", .data = (ulong)&sun50i_a64_cfg},
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(sun4i_usb_phy) = {
|
|
.name = "sun4i_usb_phy",
|
|
.id = UCLASS_PHY,
|
|
.of_match = sun4i_usb_phy_ids,
|
|
.ops = &sun4i_usb_phy_ops,
|
|
.probe = sun4i_usb_phy_probe,
|
|
.platdata_auto_alloc_size = sizeof(struct sun4i_usb_phy_plat[MAX_PHYS]),
|
|
.priv_auto_alloc_size = sizeof(struct sun4i_usb_phy_data),
|
|
};
|