mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-28 05:53:54 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
775 lines
20 KiB
C
775 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2011 Michal Simek <monstr@monstr.eu>
|
|
* Copyright (C) 2011 PetaLogix
|
|
* Copyright (C) 2010 Xilinx, Inc. All rights reserved.
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <net.h>
|
|
#include <malloc.h>
|
|
#include <asm/io.h>
|
|
#include <phy.h>
|
|
#include <miiphy.h>
|
|
#include <wait_bit.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* Link setup */
|
|
#define XAE_EMMC_LINKSPEED_MASK 0xC0000000 /* Link speed */
|
|
#define XAE_EMMC_LINKSPD_10 0x00000000 /* Link Speed mask for 10 Mbit */
|
|
#define XAE_EMMC_LINKSPD_100 0x40000000 /* Link Speed mask for 100 Mbit */
|
|
#define XAE_EMMC_LINKSPD_1000 0x80000000 /* Link Speed mask for 1000 Mbit */
|
|
|
|
/* Interrupt Status/Enable/Mask Registers bit definitions */
|
|
#define XAE_INT_RXRJECT_MASK 0x00000008 /* Rx frame rejected */
|
|
#define XAE_INT_MGTRDY_MASK 0x00000080 /* MGT clock Lock */
|
|
|
|
/* Receive Configuration Word 1 (RCW1) Register bit definitions */
|
|
#define XAE_RCW1_RX_MASK 0x10000000 /* Receiver enable */
|
|
|
|
/* Transmitter Configuration (TC) Register bit definitions */
|
|
#define XAE_TC_TX_MASK 0x10000000 /* Transmitter enable */
|
|
|
|
#define XAE_UAW1_UNICASTADDR_MASK 0x0000FFFF
|
|
|
|
/* MDIO Management Configuration (MC) Register bit definitions */
|
|
#define XAE_MDIO_MC_MDIOEN_MASK 0x00000040 /* MII management enable*/
|
|
|
|
/* MDIO Management Control Register (MCR) Register bit definitions */
|
|
#define XAE_MDIO_MCR_PHYAD_MASK 0x1F000000 /* Phy Address Mask */
|
|
#define XAE_MDIO_MCR_PHYAD_SHIFT 24 /* Phy Address Shift */
|
|
#define XAE_MDIO_MCR_REGAD_MASK 0x001F0000 /* Reg Address Mask */
|
|
#define XAE_MDIO_MCR_REGAD_SHIFT 16 /* Reg Address Shift */
|
|
#define XAE_MDIO_MCR_OP_READ_MASK 0x00008000 /* Op Code Read Mask */
|
|
#define XAE_MDIO_MCR_OP_WRITE_MASK 0x00004000 /* Op Code Write Mask */
|
|
#define XAE_MDIO_MCR_INITIATE_MASK 0x00000800 /* Ready Mask */
|
|
#define XAE_MDIO_MCR_READY_MASK 0x00000080 /* Ready Mask */
|
|
|
|
#define XAE_MDIO_DIV_DFT 29 /* Default MDIO clock divisor */
|
|
|
|
#define XAXIDMA_BD_STS_ACTUAL_LEN_MASK 0x007FFFFF /* Actual len */
|
|
|
|
/* DMA macros */
|
|
/* Bitmasks of XAXIDMA_CR_OFFSET register */
|
|
#define XAXIDMA_CR_RUNSTOP_MASK 0x00000001 /* Start/stop DMA channel */
|
|
#define XAXIDMA_CR_RESET_MASK 0x00000004 /* Reset DMA engine */
|
|
|
|
/* Bitmasks of XAXIDMA_SR_OFFSET register */
|
|
#define XAXIDMA_HALTED_MASK 0x00000001 /* DMA channel halted */
|
|
|
|
/* Bitmask for interrupts */
|
|
#define XAXIDMA_IRQ_IOC_MASK 0x00001000 /* Completion intr */
|
|
#define XAXIDMA_IRQ_DELAY_MASK 0x00002000 /* Delay interrupt */
|
|
#define XAXIDMA_IRQ_ALL_MASK 0x00007000 /* All interrupts */
|
|
|
|
/* Bitmasks of XAXIDMA_BD_CTRL_OFFSET register */
|
|
#define XAXIDMA_BD_CTRL_TXSOF_MASK 0x08000000 /* First tx packet */
|
|
#define XAXIDMA_BD_CTRL_TXEOF_MASK 0x04000000 /* Last tx packet */
|
|
|
|
#define DMAALIGN 128
|
|
|
|
static u8 rxframe[PKTSIZE_ALIGN] __attribute((aligned(DMAALIGN)));
|
|
|
|
/* Reflect dma offsets */
|
|
struct axidma_reg {
|
|
u32 control; /* DMACR */
|
|
u32 status; /* DMASR */
|
|
u32 current; /* CURDESC low 32 bit */
|
|
u32 current_hi; /* CURDESC high 32 bit */
|
|
u32 tail; /* TAILDESC low 32 bit */
|
|
u32 tail_hi; /* TAILDESC high 32 bit */
|
|
};
|
|
|
|
/* Private driver structures */
|
|
struct axidma_priv {
|
|
struct axidma_reg *dmatx;
|
|
struct axidma_reg *dmarx;
|
|
int phyaddr;
|
|
struct axi_regs *iobase;
|
|
phy_interface_t interface;
|
|
struct phy_device *phydev;
|
|
struct mii_dev *bus;
|
|
u8 eth_hasnobuf;
|
|
};
|
|
|
|
/* BD descriptors */
|
|
struct axidma_bd {
|
|
u32 next; /* Next descriptor pointer */
|
|
u32 reserved1;
|
|
u32 phys; /* Buffer address */
|
|
u32 reserved2;
|
|
u32 reserved3;
|
|
u32 reserved4;
|
|
u32 cntrl; /* Control */
|
|
u32 status; /* Status */
|
|
u32 app0;
|
|
u32 app1; /* TX start << 16 | insert */
|
|
u32 app2; /* TX csum seed */
|
|
u32 app3;
|
|
u32 app4;
|
|
u32 sw_id_offset;
|
|
u32 reserved5;
|
|
u32 reserved6;
|
|
};
|
|
|
|
/* Static BDs - driver uses only one BD */
|
|
static struct axidma_bd tx_bd __attribute((aligned(DMAALIGN)));
|
|
static struct axidma_bd rx_bd __attribute((aligned(DMAALIGN)));
|
|
|
|
struct axi_regs {
|
|
u32 reserved[3];
|
|
u32 is; /* 0xC: Interrupt status */
|
|
u32 reserved2;
|
|
u32 ie; /* 0x14: Interrupt enable */
|
|
u32 reserved3[251];
|
|
u32 rcw1; /* 0x404: Rx Configuration Word 1 */
|
|
u32 tc; /* 0x408: Tx Configuration */
|
|
u32 reserved4;
|
|
u32 emmc; /* 0x410: EMAC mode configuration */
|
|
u32 reserved5[59];
|
|
u32 mdio_mc; /* 0x500: MII Management Config */
|
|
u32 mdio_mcr; /* 0x504: MII Management Control */
|
|
u32 mdio_mwd; /* 0x508: MII Management Write Data */
|
|
u32 mdio_mrd; /* 0x50C: MII Management Read Data */
|
|
u32 reserved6[124];
|
|
u32 uaw0; /* 0x700: Unicast address word 0 */
|
|
u32 uaw1; /* 0x704: Unicast address word 1 */
|
|
};
|
|
|
|
/* Use MII register 1 (MII status register) to detect PHY */
|
|
#define PHY_DETECT_REG 1
|
|
|
|
/*
|
|
* Mask used to verify certain PHY features (or register contents)
|
|
* in the register above:
|
|
* 0x1000: 10Mbps full duplex support
|
|
* 0x0800: 10Mbps half duplex support
|
|
* 0x0008: Auto-negotiation support
|
|
*/
|
|
#define PHY_DETECT_MASK 0x1808
|
|
|
|
static inline int mdio_wait(struct axi_regs *regs)
|
|
{
|
|
u32 timeout = 200;
|
|
|
|
/* Wait till MDIO interface is ready to accept a new transaction. */
|
|
while (timeout && (!(readl(®s->mdio_mcr)
|
|
& XAE_MDIO_MCR_READY_MASK))) {
|
|
timeout--;
|
|
udelay(1);
|
|
}
|
|
if (!timeout) {
|
|
printf("%s: Timeout\n", __func__);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* axienet_dma_write - Memory mapped Axi DMA register Buffer Descriptor write.
|
|
* @bd: pointer to BD descriptor structure
|
|
* @desc: Address offset of DMA descriptors
|
|
*
|
|
* This function writes the value into the corresponding Axi DMA register.
|
|
*/
|
|
static inline void axienet_dma_write(struct axidma_bd *bd, u32 *desc)
|
|
{
|
|
#if defined(CONFIG_PHYS_64BIT)
|
|
writeq(bd, desc);
|
|
#else
|
|
writel((u32)bd, desc);
|
|
#endif
|
|
}
|
|
|
|
static u32 phyread(struct axidma_priv *priv, u32 phyaddress, u32 registernum,
|
|
u16 *val)
|
|
{
|
|
struct axi_regs *regs = priv->iobase;
|
|
u32 mdioctrlreg = 0;
|
|
|
|
if (mdio_wait(regs))
|
|
return 1;
|
|
|
|
mdioctrlreg = ((phyaddress << XAE_MDIO_MCR_PHYAD_SHIFT) &
|
|
XAE_MDIO_MCR_PHYAD_MASK) |
|
|
((registernum << XAE_MDIO_MCR_REGAD_SHIFT)
|
|
& XAE_MDIO_MCR_REGAD_MASK) |
|
|
XAE_MDIO_MCR_INITIATE_MASK |
|
|
XAE_MDIO_MCR_OP_READ_MASK;
|
|
|
|
writel(mdioctrlreg, ®s->mdio_mcr);
|
|
|
|
if (mdio_wait(regs))
|
|
return 1;
|
|
|
|
/* Read data */
|
|
*val = readl(®s->mdio_mrd);
|
|
return 0;
|
|
}
|
|
|
|
static u32 phywrite(struct axidma_priv *priv, u32 phyaddress, u32 registernum,
|
|
u32 data)
|
|
{
|
|
struct axi_regs *regs = priv->iobase;
|
|
u32 mdioctrlreg = 0;
|
|
|
|
if (mdio_wait(regs))
|
|
return 1;
|
|
|
|
mdioctrlreg = ((phyaddress << XAE_MDIO_MCR_PHYAD_SHIFT) &
|
|
XAE_MDIO_MCR_PHYAD_MASK) |
|
|
((registernum << XAE_MDIO_MCR_REGAD_SHIFT)
|
|
& XAE_MDIO_MCR_REGAD_MASK) |
|
|
XAE_MDIO_MCR_INITIATE_MASK |
|
|
XAE_MDIO_MCR_OP_WRITE_MASK;
|
|
|
|
/* Write data */
|
|
writel(data, ®s->mdio_mwd);
|
|
|
|
writel(mdioctrlreg, ®s->mdio_mcr);
|
|
|
|
if (mdio_wait(regs))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axiemac_phy_init(struct udevice *dev)
|
|
{
|
|
u16 phyreg;
|
|
u32 i, ret;
|
|
struct axidma_priv *priv = dev_get_priv(dev);
|
|
struct axi_regs *regs = priv->iobase;
|
|
struct phy_device *phydev;
|
|
|
|
u32 supported = SUPPORTED_10baseT_Half |
|
|
SUPPORTED_10baseT_Full |
|
|
SUPPORTED_100baseT_Half |
|
|
SUPPORTED_100baseT_Full |
|
|
SUPPORTED_1000baseT_Half |
|
|
SUPPORTED_1000baseT_Full;
|
|
|
|
/* Set default MDIO divisor */
|
|
writel(XAE_MDIO_DIV_DFT | XAE_MDIO_MC_MDIOEN_MASK, ®s->mdio_mc);
|
|
|
|
if (priv->phyaddr == -1) {
|
|
/* Detect the PHY address */
|
|
for (i = 31; i >= 0; i--) {
|
|
ret = phyread(priv, i, PHY_DETECT_REG, &phyreg);
|
|
if (!ret && (phyreg != 0xFFFF) &&
|
|
((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) {
|
|
/* Found a valid PHY address */
|
|
priv->phyaddr = i;
|
|
debug("axiemac: Found valid phy address, %x\n",
|
|
i);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Interface - look at tsec */
|
|
phydev = phy_connect(priv->bus, priv->phyaddr, dev, priv->interface);
|
|
|
|
phydev->supported &= supported;
|
|
phydev->advertising = phydev->supported;
|
|
priv->phydev = phydev;
|
|
phy_config(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Setting axi emac and phy to proper setting */
|
|
static int setup_phy(struct udevice *dev)
|
|
{
|
|
u16 temp;
|
|
u32 speed, emmc_reg, ret;
|
|
struct axidma_priv *priv = dev_get_priv(dev);
|
|
struct axi_regs *regs = priv->iobase;
|
|
struct phy_device *phydev = priv->phydev;
|
|
|
|
if (priv->interface == PHY_INTERFACE_MODE_SGMII) {
|
|
/*
|
|
* In SGMII cases the isolate bit might set
|
|
* after DMA and ethernet resets and hence
|
|
* check and clear if set.
|
|
*/
|
|
ret = phyread(priv, priv->phyaddr, MII_BMCR, &temp);
|
|
if (ret)
|
|
return 0;
|
|
if (temp & BMCR_ISOLATE) {
|
|
temp &= ~BMCR_ISOLATE;
|
|
ret = phywrite(priv, priv->phyaddr, MII_BMCR, temp);
|
|
if (ret)
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
if (phy_startup(phydev)) {
|
|
printf("axiemac: could not initialize PHY %s\n",
|
|
phydev->dev->name);
|
|
return 0;
|
|
}
|
|
if (!phydev->link) {
|
|
printf("%s: No link.\n", phydev->dev->name);
|
|
return 0;
|
|
}
|
|
|
|
switch (phydev->speed) {
|
|
case 1000:
|
|
speed = XAE_EMMC_LINKSPD_1000;
|
|
break;
|
|
case 100:
|
|
speed = XAE_EMMC_LINKSPD_100;
|
|
break;
|
|
case 10:
|
|
speed = XAE_EMMC_LINKSPD_10;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
/* Setup the emac for the phy speed */
|
|
emmc_reg = readl(®s->emmc);
|
|
emmc_reg &= ~XAE_EMMC_LINKSPEED_MASK;
|
|
emmc_reg |= speed;
|
|
|
|
/* Write new speed setting out to Axi Ethernet */
|
|
writel(emmc_reg, ®s->emmc);
|
|
|
|
/*
|
|
* Setting the operating speed of the MAC needs a delay. There
|
|
* doesn't seem to be register to poll, so please consider this
|
|
* during your application design.
|
|
*/
|
|
udelay(1);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* STOP DMA transfers */
|
|
static void axiemac_stop(struct udevice *dev)
|
|
{
|
|
struct axidma_priv *priv = dev_get_priv(dev);
|
|
u32 temp;
|
|
|
|
/* Stop the hardware */
|
|
temp = readl(&priv->dmatx->control);
|
|
temp &= ~XAXIDMA_CR_RUNSTOP_MASK;
|
|
writel(temp, &priv->dmatx->control);
|
|
|
|
temp = readl(&priv->dmarx->control);
|
|
temp &= ~XAXIDMA_CR_RUNSTOP_MASK;
|
|
writel(temp, &priv->dmarx->control);
|
|
|
|
debug("axiemac: Halted\n");
|
|
}
|
|
|
|
static int axi_ethernet_init(struct axidma_priv *priv)
|
|
{
|
|
struct axi_regs *regs = priv->iobase;
|
|
int err;
|
|
|
|
/*
|
|
* Check the status of the MgtRdy bit in the interrupt status
|
|
* registers. This must be done to allow the MGT clock to become stable
|
|
* for the Sgmii and 1000BaseX PHY interfaces. No other register reads
|
|
* will be valid until this bit is valid.
|
|
* The bit is always a 1 for all other PHY interfaces.
|
|
* Interrupt status and enable registers are not available in non
|
|
* processor mode and hence bypass in this mode
|
|
*/
|
|
if (!priv->eth_hasnobuf) {
|
|
err = wait_for_bit_le32(®s->is, XAE_INT_MGTRDY_MASK,
|
|
true, 200, false);
|
|
if (err) {
|
|
printf("%s: Timeout\n", __func__);
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Stop the device and reset HW
|
|
* Disable interrupts
|
|
*/
|
|
writel(0, ®s->ie);
|
|
}
|
|
|
|
/* Disable the receiver */
|
|
writel(readl(®s->rcw1) & ~XAE_RCW1_RX_MASK, ®s->rcw1);
|
|
|
|
/*
|
|
* Stopping the receiver in mid-packet causes a dropped packet
|
|
* indication from HW. Clear it.
|
|
*/
|
|
if (!priv->eth_hasnobuf) {
|
|
/* Set the interrupt status register to clear the interrupt */
|
|
writel(XAE_INT_RXRJECT_MASK, ®s->is);
|
|
}
|
|
|
|
/* Setup HW */
|
|
/* Set default MDIO divisor */
|
|
writel(XAE_MDIO_DIV_DFT | XAE_MDIO_MC_MDIOEN_MASK, ®s->mdio_mc);
|
|
|
|
debug("axiemac: InitHw done\n");
|
|
return 0;
|
|
}
|
|
|
|
static int axiemac_write_hwaddr(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
struct axidma_priv *priv = dev_get_priv(dev);
|
|
struct axi_regs *regs = priv->iobase;
|
|
|
|
/* Set the MAC address */
|
|
int val = ((pdata->enetaddr[3] << 24) | (pdata->enetaddr[2] << 16) |
|
|
(pdata->enetaddr[1] << 8) | (pdata->enetaddr[0]));
|
|
writel(val, ®s->uaw0);
|
|
|
|
val = (pdata->enetaddr[5] << 8) | pdata->enetaddr[4];
|
|
val |= readl(®s->uaw1) & ~XAE_UAW1_UNICASTADDR_MASK;
|
|
writel(val, ®s->uaw1);
|
|
return 0;
|
|
}
|
|
|
|
/* Reset DMA engine */
|
|
static void axi_dma_init(struct axidma_priv *priv)
|
|
{
|
|
u32 timeout = 500;
|
|
|
|
/* Reset the engine so the hardware starts from a known state */
|
|
writel(XAXIDMA_CR_RESET_MASK, &priv->dmatx->control);
|
|
writel(XAXIDMA_CR_RESET_MASK, &priv->dmarx->control);
|
|
|
|
/* At the initialization time, hardware should finish reset quickly */
|
|
while (timeout--) {
|
|
/* Check transmit/receive channel */
|
|
/* Reset is done when the reset bit is low */
|
|
if (!((readl(&priv->dmatx->control) |
|
|
readl(&priv->dmarx->control))
|
|
& XAXIDMA_CR_RESET_MASK)) {
|
|
break;
|
|
}
|
|
}
|
|
if (!timeout)
|
|
printf("%s: Timeout\n", __func__);
|
|
}
|
|
|
|
static int axiemac_start(struct udevice *dev)
|
|
{
|
|
struct axidma_priv *priv = dev_get_priv(dev);
|
|
struct axi_regs *regs = priv->iobase;
|
|
u32 temp;
|
|
|
|
debug("axiemac: Init started\n");
|
|
/*
|
|
* Initialize AXIDMA engine. AXIDMA engine must be initialized before
|
|
* AxiEthernet. During AXIDMA engine initialization, AXIDMA hardware is
|
|
* reset, and since AXIDMA reset line is connected to AxiEthernet, this
|
|
* would ensure a reset of AxiEthernet.
|
|
*/
|
|
axi_dma_init(priv);
|
|
|
|
/* Initialize AxiEthernet hardware. */
|
|
if (axi_ethernet_init(priv))
|
|
return -1;
|
|
|
|
/* Disable all RX interrupts before RxBD space setup */
|
|
temp = readl(&priv->dmarx->control);
|
|
temp &= ~XAXIDMA_IRQ_ALL_MASK;
|
|
writel(temp, &priv->dmarx->control);
|
|
|
|
/* Start DMA RX channel. Now it's ready to receive data.*/
|
|
axienet_dma_write(&rx_bd, &priv->dmarx->current);
|
|
|
|
/* Setup the BD. */
|
|
memset(&rx_bd, 0, sizeof(rx_bd));
|
|
rx_bd.next = (u32)&rx_bd;
|
|
rx_bd.phys = (u32)&rxframe;
|
|
rx_bd.cntrl = sizeof(rxframe);
|
|
/* Flush the last BD so DMA core could see the updates */
|
|
flush_cache((u32)&rx_bd, sizeof(rx_bd));
|
|
|
|
/* It is necessary to flush rxframe because if you don't do it
|
|
* then cache can contain uninitialized data */
|
|
flush_cache((u32)&rxframe, sizeof(rxframe));
|
|
|
|
/* Start the hardware */
|
|
temp = readl(&priv->dmarx->control);
|
|
temp |= XAXIDMA_CR_RUNSTOP_MASK;
|
|
writel(temp, &priv->dmarx->control);
|
|
|
|
/* Rx BD is ready - start */
|
|
axienet_dma_write(&rx_bd, &priv->dmarx->tail);
|
|
|
|
/* Enable TX */
|
|
writel(XAE_TC_TX_MASK, ®s->tc);
|
|
/* Enable RX */
|
|
writel(XAE_RCW1_RX_MASK, ®s->rcw1);
|
|
|
|
/* PHY setup */
|
|
if (!setup_phy(dev)) {
|
|
axiemac_stop(dev);
|
|
return -1;
|
|
}
|
|
|
|
debug("axiemac: Init complete\n");
|
|
return 0;
|
|
}
|
|
|
|
static int axiemac_send(struct udevice *dev, void *ptr, int len)
|
|
{
|
|
struct axidma_priv *priv = dev_get_priv(dev);
|
|
u32 timeout;
|
|
|
|
if (len > PKTSIZE_ALIGN)
|
|
len = PKTSIZE_ALIGN;
|
|
|
|
/* Flush packet to main memory to be trasfered by DMA */
|
|
flush_cache((u32)ptr, len);
|
|
|
|
/* Setup Tx BD */
|
|
memset(&tx_bd, 0, sizeof(tx_bd));
|
|
/* At the end of the ring, link the last BD back to the top */
|
|
tx_bd.next = (u32)&tx_bd;
|
|
tx_bd.phys = (u32)ptr;
|
|
/* Save len */
|
|
tx_bd.cntrl = len | XAXIDMA_BD_CTRL_TXSOF_MASK |
|
|
XAXIDMA_BD_CTRL_TXEOF_MASK;
|
|
|
|
/* Flush the last BD so DMA core could see the updates */
|
|
flush_cache((u32)&tx_bd, sizeof(tx_bd));
|
|
|
|
if (readl(&priv->dmatx->status) & XAXIDMA_HALTED_MASK) {
|
|
u32 temp;
|
|
axienet_dma_write(&tx_bd, &priv->dmatx->current);
|
|
/* Start the hardware */
|
|
temp = readl(&priv->dmatx->control);
|
|
temp |= XAXIDMA_CR_RUNSTOP_MASK;
|
|
writel(temp, &priv->dmatx->control);
|
|
}
|
|
|
|
/* Start transfer */
|
|
axienet_dma_write(&tx_bd, &priv->dmatx->tail);
|
|
|
|
/* Wait for transmission to complete */
|
|
debug("axiemac: Waiting for tx to be done\n");
|
|
timeout = 200;
|
|
while (timeout && (!(readl(&priv->dmatx->status) &
|
|
(XAXIDMA_IRQ_DELAY_MASK | XAXIDMA_IRQ_IOC_MASK)))) {
|
|
timeout--;
|
|
udelay(1);
|
|
}
|
|
if (!timeout) {
|
|
printf("%s: Timeout\n", __func__);
|
|
return 1;
|
|
}
|
|
|
|
debug("axiemac: Sending complete\n");
|
|
return 0;
|
|
}
|
|
|
|
static int isrxready(struct axidma_priv *priv)
|
|
{
|
|
u32 status;
|
|
|
|
/* Read pending interrupts */
|
|
status = readl(&priv->dmarx->status);
|
|
|
|
/* Acknowledge pending interrupts */
|
|
writel(status & XAXIDMA_IRQ_ALL_MASK, &priv->dmarx->status);
|
|
|
|
/*
|
|
* If Reception done interrupt is asserted, call RX call back function
|
|
* to handle the processed BDs and then raise the according flag.
|
|
*/
|
|
if ((status & (XAXIDMA_IRQ_DELAY_MASK | XAXIDMA_IRQ_IOC_MASK)))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axiemac_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
u32 length;
|
|
struct axidma_priv *priv = dev_get_priv(dev);
|
|
u32 temp;
|
|
|
|
/* Wait for an incoming packet */
|
|
if (!isrxready(priv))
|
|
return -1;
|
|
|
|
debug("axiemac: RX data ready\n");
|
|
|
|
/* Disable IRQ for a moment till packet is handled */
|
|
temp = readl(&priv->dmarx->control);
|
|
temp &= ~XAXIDMA_IRQ_ALL_MASK;
|
|
writel(temp, &priv->dmarx->control);
|
|
if (!priv->eth_hasnobuf)
|
|
length = rx_bd.app4 & 0xFFFF; /* max length mask */
|
|
else
|
|
length = rx_bd.status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK;
|
|
|
|
#ifdef DEBUG
|
|
print_buffer(&rxframe, &rxframe[0], 1, length, 16);
|
|
#endif
|
|
|
|
*packetp = rxframe;
|
|
return length;
|
|
}
|
|
|
|
static int axiemac_free_pkt(struct udevice *dev, uchar *packet, int length)
|
|
{
|
|
struct axidma_priv *priv = dev_get_priv(dev);
|
|
|
|
#ifdef DEBUG
|
|
/* It is useful to clear buffer to be sure that it is consistent */
|
|
memset(rxframe, 0, sizeof(rxframe));
|
|
#endif
|
|
/* Setup RxBD */
|
|
/* Clear the whole buffer and setup it again - all flags are cleared */
|
|
memset(&rx_bd, 0, sizeof(rx_bd));
|
|
rx_bd.next = (u32)&rx_bd;
|
|
rx_bd.phys = (u32)&rxframe;
|
|
rx_bd.cntrl = sizeof(rxframe);
|
|
|
|
/* Write bd to HW */
|
|
flush_cache((u32)&rx_bd, sizeof(rx_bd));
|
|
|
|
/* It is necessary to flush rxframe because if you don't do it
|
|
* then cache will contain previous packet */
|
|
flush_cache((u32)&rxframe, sizeof(rxframe));
|
|
|
|
/* Rx BD is ready - start again */
|
|
axienet_dma_write(&rx_bd, &priv->dmarx->tail);
|
|
|
|
debug("axiemac: RX completed, framelength = %d\n", length);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axiemac_miiphy_read(struct mii_dev *bus, int addr,
|
|
int devad, int reg)
|
|
{
|
|
int ret;
|
|
u16 value;
|
|
|
|
ret = phyread(bus->priv, addr, reg, &value);
|
|
debug("axiemac: Read MII 0x%x, 0x%x, 0x%x, %d\n", addr, reg,
|
|
value, ret);
|
|
return value;
|
|
}
|
|
|
|
static int axiemac_miiphy_write(struct mii_dev *bus, int addr, int devad,
|
|
int reg, u16 value)
|
|
{
|
|
debug("axiemac: Write MII 0x%x, 0x%x, 0x%x\n", addr, reg, value);
|
|
return phywrite(bus->priv, addr, reg, value);
|
|
}
|
|
|
|
static int axi_emac_probe(struct udevice *dev)
|
|
{
|
|
struct axidma_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
priv->bus = mdio_alloc();
|
|
priv->bus->read = axiemac_miiphy_read;
|
|
priv->bus->write = axiemac_miiphy_write;
|
|
priv->bus->priv = priv;
|
|
|
|
ret = mdio_register_seq(priv->bus, dev->seq);
|
|
if (ret)
|
|
return ret;
|
|
|
|
axiemac_phy_init(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axi_emac_remove(struct udevice *dev)
|
|
{
|
|
struct axidma_priv *priv = dev_get_priv(dev);
|
|
|
|
free(priv->phydev);
|
|
mdio_unregister(priv->bus);
|
|
mdio_free(priv->bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct eth_ops axi_emac_ops = {
|
|
.start = axiemac_start,
|
|
.send = axiemac_send,
|
|
.recv = axiemac_recv,
|
|
.free_pkt = axiemac_free_pkt,
|
|
.stop = axiemac_stop,
|
|
.write_hwaddr = axiemac_write_hwaddr,
|
|
};
|
|
|
|
static int axi_emac_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
struct axidma_priv *priv = dev_get_priv(dev);
|
|
int node = dev_of_offset(dev);
|
|
int offset = 0;
|
|
const char *phy_mode;
|
|
|
|
pdata->iobase = (phys_addr_t)devfdt_get_addr(dev);
|
|
priv->iobase = (struct axi_regs *)pdata->iobase;
|
|
|
|
offset = fdtdec_lookup_phandle(gd->fdt_blob, node,
|
|
"axistream-connected");
|
|
if (offset <= 0) {
|
|
printf("%s: axistream is not found\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
priv->dmatx = (struct axidma_reg *)fdtdec_get_addr(gd->fdt_blob,
|
|
offset, "reg");
|
|
if (!priv->dmatx) {
|
|
printf("%s: axi_dma register space not found\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
/* RX channel offset is 0x30 */
|
|
priv->dmarx = (struct axidma_reg *)((u32)priv->dmatx + 0x30);
|
|
|
|
priv->phyaddr = -1;
|
|
|
|
offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "phy-handle");
|
|
if (offset > 0)
|
|
priv->phyaddr = fdtdec_get_int(gd->fdt_blob, offset, "reg", -1);
|
|
|
|
phy_mode = fdt_getprop(gd->fdt_blob, node, "phy-mode", NULL);
|
|
if (phy_mode)
|
|
pdata->phy_interface = phy_get_interface_by_name(phy_mode);
|
|
if (pdata->phy_interface == -1) {
|
|
printf("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
|
|
return -EINVAL;
|
|
}
|
|
priv->interface = pdata->phy_interface;
|
|
|
|
priv->eth_hasnobuf = fdtdec_get_bool(gd->fdt_blob, node,
|
|
"xlnx,eth-hasnobuf");
|
|
|
|
printf("AXI EMAC: %lx, phyaddr %d, interface %s\n", (ulong)priv->iobase,
|
|
priv->phyaddr, phy_string_for_interface(priv->interface));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id axi_emac_ids[] = {
|
|
{ .compatible = "xlnx,axi-ethernet-1.00.a" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(axi_emac) = {
|
|
.name = "axi_emac",
|
|
.id = UCLASS_ETH,
|
|
.of_match = axi_emac_ids,
|
|
.ofdata_to_platdata = axi_emac_ofdata_to_platdata,
|
|
.probe = axi_emac_probe,
|
|
.remove = axi_emac_remove,
|
|
.ops = &axi_emac_ops,
|
|
.priv_auto_alloc_size = sizeof(struct axidma_priv),
|
|
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
|
|
};
|