Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-28 05:53:54 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/net/smc91111.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

788 lines
26 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0+ */
/*------------------------------------------------------------------------
. smc91111.h - macros for the LAN91C111 Ethernet Driver
.
. (C) Copyright 2002
. Sysgo Real-Time Solutions, GmbH <www.elinos.com>
. Rolf Offermanns <rof@sysgo.de>
. Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
. Developed by Simple Network Magic Corporation (SNMC)
. Copyright (C) 1996 by Erik Stahlman (ES)
.
. This file contains register information and access macros for
. the LAN91C111 single chip ethernet controller. It is a modified
. version of the smc9194.h file.
.
. Information contained in this file was obtained from the LAN91C111
. manual from SMC. To get a copy, if you really want one, you can find
. information under www.smsc.com.
.
. Authors
. Erik Stahlman ( erik@vt.edu )
. Daris A Nevil ( dnevil@snmc.com )
.
. History
. 03/16/01 Daris A Nevil Modified for use with LAN91C111 device
.
---------------------------------------------------------------------------*/
#ifndef _SMC91111_H_
#define _SMC91111_H_
#include <asm/types.h>
#include <config.h>
/*
* This function may be called by the board specific initialisation code
* in order to override the default mac address.
*/
void smc_set_mac_addr (const unsigned char *addr);
/* I want some simple types */
typedef unsigned char byte;
typedef unsigned short word;
typedef unsigned long int dword;
struct smc91111_priv{
u8 dev_num;
};
/*
. DEBUGGING LEVELS
.
. 0 for normal operation
. 1 for slightly more details
. >2 for various levels of increasingly useless information
. 2 for interrupt tracking, status flags
. 3 for packet info
. 4 for complete packet dumps
*/
/*#define SMC_DEBUG 0 */
/* Because of bank switching, the LAN91xxx uses only 16 I/O ports */
#define SMC_IO_EXTENT 16
#ifdef CONFIG_CPU_PXA25X
#ifdef CONFIG_XSENGINE
#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+((r)<<1))))
#define SMC_inw(a,r) (*((volatile word *)((a)->iobase+((r)<<1))))
#define SMC_inb(a,p) ({ \
unsigned int __p = (unsigned int)((a)->iobase + ((p)<<1)); \
unsigned int __v = *(volatile unsigned short *)((__p) & ~2); \
if (__p & 2) __v >>= 8; \
else __v &= 0xff; \
__v; })
#else
#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+(r))))
#define SMC_inw(a,r) (*((volatile word *)((a)->iobase+(r))))
#define SMC_inb(a,p) ({ \
unsigned int __p = (unsigned int)((a)->iobase + (p)); \
unsigned int __v = *(volatile unsigned short *)((__p) & ~1); \
if (__p & 1) __v >>= 8; \
else __v &= 0xff; \
__v; })
#endif
#ifdef CONFIG_XSENGINE
#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r<<1))) = d)
#define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r<<1))) = d)
#else
#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r))) = d)
#define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r))) = d)
#endif
#define SMC_outb(a,d,r) ({ word __d = (byte)(d); \
word __w = SMC_inw((a),(r)&~1); \
__w &= ((r)&1) ? 0x00FF : 0xFF00; \
__w |= ((r)&1) ? __d<<8 : __d; \
SMC_outw((a),__w,(r)&~1); \
})
#define SMC_outsl(a,r,b,l) ({ int __i; \
dword *__b2; \
__b2 = (dword *) b; \
for (__i = 0; __i < l; __i++) { \
SMC_outl((a), *(__b2 + __i), r); \
} \
})
#define SMC_outsw(a,r,b,l) ({ int __i; \
word *__b2; \
__b2 = (word *) b; \
for (__i = 0; __i < l; __i++) { \
SMC_outw((a), *(__b2 + __i), r); \
} \
})
#define SMC_insl(a,r,b,l) ({ int __i ; \
dword *__b2; \
__b2 = (dword *) b; \
for (__i = 0; __i < l; __i++) { \
*(__b2 + __i) = SMC_inl((a),(r)); \
SMC_inl((a),0); \
}; \
})
#define SMC_insw(a,r,b,l) ({ int __i ; \
word *__b2; \
__b2 = (word *) b; \
for (__i = 0; __i < l; __i++) { \
*(__b2 + __i) = SMC_inw((a),(r)); \
SMC_inw((a),0); \
}; \
})
#define SMC_insb(a,r,b,l) ({ int __i ; \
byte *__b2; \
__b2 = (byte *) b; \
for (__i = 0; __i < l; __i++) { \
*(__b2 + __i) = SMC_inb((a),(r)); \
SMC_inb((a),0); \
}; \
})
#elif defined(CONFIG_LEON) /* if not CONFIG_CPU_PXA25X */
#define SMC_LEON_SWAP16(_x_) ({ word _x = (_x_); ((_x << 8) | (_x >> 8)); })
#define SMC_LEON_SWAP32(_x_) \
({ dword _x = (_x_); \
((_x << 24) | \
((0x0000FF00UL & _x) << 8) | \
((0x00FF0000UL & _x) >> 8) | \
(_x >> 24)); })
#define SMC_inl(a,r) (SMC_LEON_SWAP32((*(volatile dword *)((a)->iobase+((r)<<0)))))
#define SMC_inl_nosw(a,r) ((*(volatile dword *)((a)->iobase+((r)<<0))))
#define SMC_inw(a,r) (SMC_LEON_SWAP16((*(volatile word *)((a)->iobase+((r)<<0)))))
#define SMC_inw_nosw(a,r) ((*(volatile word *)((a)->iobase+((r)<<0))))
#define SMC_inb(a,p) ({ \
word ___v = SMC_inw((a),(p) & ~1); \
if ((p) & 1) ___v >>= 8; \
else ___v &= 0xff; \
___v; })
#define SMC_outl(a,d,r) (*(volatile dword *)((a)->iobase+((r)<<0))=SMC_LEON_SWAP32(d))
#define SMC_outl_nosw(a,d,r) (*(volatile dword *)((a)->iobase+((r)<<0))=(d))
#define SMC_outw(a,d,r) (*(volatile word *)((a)->iobase+((r)<<0))=SMC_LEON_SWAP16(d))
#define SMC_outw_nosw(a,d,r) (*(volatile word *)((a)->iobase+((r)<<0))=(d))
#define SMC_outb(a,d,r) do{ word __d = (byte)(d); \
word __w = SMC_inw((a),(r)&~1); \
__w &= ((r)&1) ? 0x00FF : 0xFF00; \
__w |= ((r)&1) ? __d<<8 : __d; \
SMC_outw((a),__w,(r)&~1); \
}while(0)
#define SMC_outsl(a,r,b,l) do{ int __i; \
dword *__b2; \
__b2 = (dword *) b; \
for (__i = 0; __i < l; __i++) { \
SMC_outl_nosw((a), *(__b2 + __i), r); \
} \
}while(0)
#define SMC_outsw(a,r,b,l) do{ int __i; \
word *__b2; \
__b2 = (word *) b; \
for (__i = 0; __i < l; __i++) { \
SMC_outw_nosw((a), *(__b2 + __i), r); \
} \
}while(0)
#define SMC_insl(a,r,b,l) do{ int __i ; \
dword *__b2; \
__b2 = (dword *) b; \
for (__i = 0; __i < l; __i++) { \
*(__b2 + __i) = SMC_inl_nosw((a),(r)); \
}; \
}while(0)
#define SMC_insw(a,r,b,l) do{ int __i ; \
word *__b2; \
__b2 = (word *) b; \
for (__i = 0; __i < l; __i++) { \
*(__b2 + __i) = SMC_inw_nosw((a),(r)); \
}; \
}while(0)
#define SMC_insb(a,r,b,l) do{ int __i ; \
byte *__b2; \
__b2 = (byte *) b; \
for (__i = 0; __i < l; __i++) { \
*(__b2 + __i) = SMC_inb((a),(r)); \
}; \
}while(0)
#elif defined(CONFIG_MS7206SE)
#define SWAB7206(x) ({ word __x = x; ((__x << 8)|(__x >> 8)); })
#define SMC_inw(a, r) *((volatile word*)((a)->iobase + (r)))
#define SMC_inb(a, r) (*((volatile byte*)((a)->iobase + ((r) ^ 0x01))))
#define SMC_insw(a, r, b, l) \
do { \
int __i; \
word *__b2 = (word *)(b); \
for (__i = 0; __i < (l); __i++) { \
*__b2++ = SWAB7206(SMC_inw(a, r)); \
} \
} while (0)
#define SMC_outw(a, d, r) (*((volatile word *)((a)->iobase+(r))) = d)
#define SMC_outb(a, d, r) ({ word __d = (byte)(d); \
word __w = SMC_inw((a), ((r)&(~1))); \
if (((r) & 1)) \
__w = (__w & 0x00ff) | (__d << 8); \
else \
__w = (__w & 0xff00) | (__d); \
SMC_outw((a), __w, ((r)&(~1))); \
})
#define SMC_outsw(a, r, b, l) \
do { \
int __i; \
word *__b2 = (word *)(b); \
for (__i = 0; __i < (l); __i++) { \
SMC_outw(a, SWAB7206(*__b2), r); \
__b2++; \
} \
} while (0)
#else /* if not CONFIG_CPU_PXA25X and not CONFIG_LEON */
#ifndef CONFIG_SMC_USE_IOFUNCS /* these macros don't work on some boards */
/*
* We have only 16 Bit PCMCIA access on Socket 0
*/
#ifdef CONFIG_ADNPESC1
#define SMC_inw(a,r) (*((volatile word *)((a)->iobase+((r)<<1))))
#elif CONFIG_ARM64
#define SMC_inw(a, r) (*((volatile word*)((a)->iobase+((dword)(r)))))
#else
#define SMC_inw(a, r) (*((volatile word*)((a)->iobase+(r))))
#endif
#define SMC_inb(a,r) (((r)&1) ? SMC_inw((a),(r)&~1)>>8 : SMC_inw((a),(r)&0xFF))
#ifdef CONFIG_ADNPESC1
#define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+((r)<<1))) = d)
#elif CONFIG_ARM64
#define SMC_outw(a, d, r) \
(*((volatile word*)((a)->iobase+((dword)(r)))) = d)
#else
#define SMC_outw(a, d, r) \
(*((volatile word*)((a)->iobase+(r))) = d)
#endif
#define SMC_outb(a,d,r) ({ word __d = (byte)(d); \
word __w = SMC_inw((a),(r)&~1); \
__w &= ((r)&1) ? 0x00FF : 0xFF00; \
__w |= ((r)&1) ? __d<<8 : __d; \
SMC_outw((a),__w,(r)&~1); \
})
#if 0
#define SMC_outsw(a,r,b,l) outsw((a)->iobase+(r), (b), (l))
#else
#define SMC_outsw(a,r,b,l) ({ int __i; \
word *__b2; \
__b2 = (word *) b; \
for (__i = 0; __i < l; __i++) { \
SMC_outw((a), *(__b2 + __i), r); \
} \
})
#endif
#if 0
#define SMC_insw(a,r,b,l) insw((a)->iobase+(r), (b), (l))
#else
#define SMC_insw(a,r,b,l) ({ int __i ; \
word *__b2; \
__b2 = (word *) b; \
for (__i = 0; __i < l; __i++) { \
*(__b2 + __i) = SMC_inw((a),(r)); \
SMC_inw((a),0); \
}; \
})
#endif
#endif /* CONFIG_SMC_USE_IOFUNCS */
#if defined(CONFIG_SMC_USE_32_BIT)
#ifdef CONFIG_XSENGINE
#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+(r<<1))))
#else
#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+(r))))
#endif
#define SMC_insl(a,r,b,l) ({ int __i ; \
dword *__b2; \
__b2 = (dword *) b; \
for (__i = 0; __i < l; __i++) { \
*(__b2 + __i) = SMC_inl((a),(r)); \
SMC_inl((a),0); \
}; \
})
#ifdef CONFIG_XSENGINE
#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r<<1))) = d)
#else
#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r))) = d)
#endif
#define SMC_outsl(a,r,b,l) ({ int __i; \
dword *__b2; \
__b2 = (dword *) b; \
for (__i = 0; __i < l; __i++) { \
SMC_outl((a), *(__b2 + __i), r); \
} \
})
#endif /* CONFIG_SMC_USE_32_BIT */
#endif
/*---------------------------------------------------------------
.
. A description of the SMSC registers is probably in order here,
. although for details, the SMC datasheet is invaluable.
.
. Basically, the chip has 4 banks of registers ( 0 to 3 ), which
. are accessed by writing a number into the BANK_SELECT register
. ( I also use a SMC_SELECT_BANK macro for this ).
.
. The banks are configured so that for most purposes, bank 2 is all
. that is needed for simple run time tasks.
-----------------------------------------------------------------------*/
/*
. Bank Select Register:
.
. yyyy yyyy 0000 00xx
. xx = bank number
. yyyy yyyy = 0x33, for identification purposes.
*/
#define BANK_SELECT 14
/* Transmit Control Register */
/* BANK 0 */
#define TCR_REG 0x0000 /* transmit control register */
#define TCR_ENABLE 0x0001 /* When 1 we can transmit */
#define TCR_LOOP 0x0002 /* Controls output pin LBK */
#define TCR_FORCOL 0x0004 /* When 1 will force a collision */
#define TCR_PAD_EN 0x0080 /* When 1 will pad tx frames < 64 bytes w/0 */
#define TCR_NOCRC 0x0100 /* When 1 will not append CRC to tx frames */
#define TCR_MON_CSN 0x0400 /* When 1 tx monitors carrier */
#define TCR_FDUPLX 0x0800 /* When 1 enables full duplex operation */
#define TCR_STP_SQET 0x1000 /* When 1 stops tx if Signal Quality Error */
#define TCR_EPH_LOOP 0x2000 /* When 1 enables EPH block loopback */
#define TCR_SWFDUP 0x8000 /* When 1 enables Switched Full Duplex mode */
#define TCR_CLEAR 0 /* do NOTHING */
/* the default settings for the TCR register : */
/* QUESTION: do I want to enable padding of short packets ? */
#define TCR_DEFAULT TCR_ENABLE
/* EPH Status Register */
/* BANK 0 */
#define EPH_STATUS_REG 0x0002
#define ES_TX_SUC 0x0001 /* Last TX was successful */
#define ES_SNGL_COL 0x0002 /* Single collision detected for last tx */
#define ES_MUL_COL 0x0004 /* Multiple collisions detected for last tx */
#define ES_LTX_MULT 0x0008 /* Last tx was a multicast */
#define ES_16COL 0x0010 /* 16 Collisions Reached */
#define ES_SQET 0x0020 /* Signal Quality Error Test */
#define ES_LTXBRD 0x0040 /* Last tx was a broadcast */
#define ES_TXDEFR 0x0080 /* Transmit Deferred */
#define ES_LATCOL 0x0200 /* Late collision detected on last tx */
#define ES_LOSTCARR 0x0400 /* Lost Carrier Sense */
#define ES_EXC_DEF 0x0800 /* Excessive Deferral */
#define ES_CTR_ROL 0x1000 /* Counter Roll Over indication */
#define ES_LINK_OK 0x4000 /* Driven by inverted value of nLNK pin */
#define ES_TXUNRN 0x8000 /* Tx Underrun */
/* Receive Control Register */
/* BANK 0 */
#define RCR_REG 0x0004
#define RCR_RX_ABORT 0x0001 /* Set if a rx frame was aborted */
#define RCR_PRMS 0x0002 /* Enable promiscuous mode */
#define RCR_ALMUL 0x0004 /* When set accepts all multicast frames */
#define RCR_RXEN 0x0100 /* IFF this is set, we can receive packets */
#define RCR_STRIP_CRC 0x0200 /* When set strips CRC from rx packets */
#define RCR_ABORT_ENB 0x0200 /* When set will abort rx on collision */
#define RCR_FILT_CAR 0x0400 /* When set filters leading 12 bit s of carrier */
#define RCR_SOFTRST 0x8000 /* resets the chip */
/* the normal settings for the RCR register : */
#define RCR_DEFAULT (RCR_STRIP_CRC | RCR_RXEN)
#define RCR_CLEAR 0x0 /* set it to a base state */
/* Counter Register */
/* BANK 0 */
#define COUNTER_REG 0x0006
/* Memory Information Register */
/* BANK 0 */
#define MIR_REG 0x0008
/* Receive/Phy Control Register */
/* BANK 0 */
#define RPC_REG 0x000A
#define RPC_SPEED 0x2000 /* When 1 PHY is in 100Mbps mode. */
#define RPC_DPLX 0x1000 /* When 1 PHY is in Full-Duplex Mode */
#define RPC_ANEG 0x0800 /* When 1 PHY is in Auto-Negotiate Mode */
#define RPC_LSXA_SHFT 5 /* Bits to shift LS2A,LS1A,LS0A to lsb */
#define RPC_LSXB_SHFT 2 /* Bits to get LS2B,LS1B,LS0B to lsb */
#define RPC_LED_100_10 (0x00) /* LED = 100Mbps OR's with 10Mbps link detect */
#define RPC_LED_RES (0x01) /* LED = Reserved */
#define RPC_LED_10 (0x02) /* LED = 10Mbps link detect */
#define RPC_LED_FD (0x03) /* LED = Full Duplex Mode */
#define RPC_LED_TX_RX (0x04) /* LED = TX or RX packet occurred */
#define RPC_LED_100 (0x05) /* LED = 100Mbps link dectect */
#define RPC_LED_TX (0x06) /* LED = TX packet occurred */
#define RPC_LED_RX (0x07) /* LED = RX packet occurred */
#if defined(CONFIG_DK1C20) || defined(CONFIG_DK1S10)
/* buggy schematic: LEDa -> yellow, LEDb --> green */
#define RPC_DEFAULT ( RPC_SPEED | RPC_DPLX | RPC_ANEG \
| (RPC_LED_TX_RX << RPC_LSXA_SHFT) \
| (RPC_LED_100_10 << RPC_LSXB_SHFT) )
#elif defined(CONFIG_ADNPESC1)
/* SSV ADNP/ESC1 has only one LED: LEDa -> Rx/Tx indicator */
#define RPC_DEFAULT ( RPC_SPEED | RPC_DPLX | RPC_ANEG \
| (RPC_LED_TX_RX << RPC_LSXA_SHFT) \
| (RPC_LED_100_10 << RPC_LSXB_SHFT) )
#else
/* SMSC reference design: LEDa --> green, LEDb --> yellow */
#define RPC_DEFAULT ( RPC_SPEED | RPC_DPLX | RPC_ANEG \
| (RPC_LED_100_10 << RPC_LSXA_SHFT) \
| (RPC_LED_TX_RX << RPC_LSXB_SHFT) )
#endif
/* Bank 0 0x000C is reserved */
/* Bank Select Register */
/* All Banks */
#define BSR_REG 0x000E
/* Configuration Reg */
/* BANK 1 */
#define CONFIG_REG 0x0000
#define CONFIG_EXT_PHY 0x0200 /* 1=external MII, 0=internal Phy */
#define CONFIG_GPCNTRL 0x0400 /* Inverse value drives pin nCNTRL */
#define CONFIG_NO_WAIT 0x1000 /* When 1 no extra wait states on ISA bus */
#define CONFIG_EPH_POWER_EN 0x8000 /* When 0 EPH is placed into low power mode. */
/* Default is powered-up, Internal Phy, Wait States, and pin nCNTRL=low */
#define CONFIG_DEFAULT (CONFIG_EPH_POWER_EN)
/* Base Address Register */
/* BANK 1 */
#define BASE_REG 0x0002
/* Individual Address Registers */
/* BANK 1 */
#define ADDR0_REG 0x0004
#define ADDR1_REG 0x0006
#define ADDR2_REG 0x0008
/* General Purpose Register */
/* BANK 1 */
#define GP_REG 0x000A
/* Control Register */
/* BANK 1 */
#define CTL_REG 0x000C
#define CTL_RCV_BAD 0x4000 /* When 1 bad CRC packets are received */
#define CTL_AUTO_RELEASE 0x0800 /* When 1 tx pages are released automatically */
#define CTL_LE_ENABLE 0x0080 /* When 1 enables Link Error interrupt */
#define CTL_CR_ENABLE 0x0040 /* When 1 enables Counter Rollover interrupt */
#define CTL_TE_ENABLE 0x0020 /* When 1 enables Transmit Error interrupt */
#define CTL_EEPROM_SELECT 0x0004 /* Controls EEPROM reload & store */
#define CTL_RELOAD 0x0002 /* When set reads EEPROM into registers */
#define CTL_STORE 0x0001 /* When set stores registers into EEPROM */
#define CTL_DEFAULT (0x1A10) /* Autorelease enabled*/
/* MMU Command Register */
/* BANK 2 */
#define MMU_CMD_REG 0x0000
#define MC_BUSY 1 /* When 1 the last release has not completed */
#define MC_NOP (0<<5) /* No Op */
#define MC_ALLOC (1<<5) /* OR with number of 256 byte packets */
#define MC_RESET (2<<5) /* Reset MMU to initial state */
#define MC_REMOVE (3<<5) /* Remove the current rx packet */
#define MC_RELEASE (4<<5) /* Remove and release the current rx packet */
#define MC_FREEPKT (5<<5) /* Release packet in PNR register */
#define MC_ENQUEUE (6<<5) /* Enqueue the packet for transmit */
#define MC_RSTTXFIFO (7<<5) /* Reset the TX FIFOs */
/* Packet Number Register */
/* BANK 2 */
#define PN_REG 0x0002
/* Allocation Result Register */
/* BANK 2 */
#define AR_REG 0x0003
#define AR_FAILED 0x80 /* Alocation Failed */
/* RX FIFO Ports Register */
/* BANK 2 */
#define RXFIFO_REG 0x0004 /* Must be read as a word */
#define RXFIFO_REMPTY 0x8000 /* RX FIFO Empty */
/* TX FIFO Ports Register */
/* BANK 2 */
#define TXFIFO_REG RXFIFO_REG /* Must be read as a word */
#define TXFIFO_TEMPTY 0x80 /* TX FIFO Empty */
/* Pointer Register */
/* BANK 2 */
#define PTR_REG 0x0006
#define PTR_RCV 0x8000 /* 1=Receive area, 0=Transmit area */
#define PTR_AUTOINC 0x4000 /* Auto increment the pointer on each access */
#define PTR_READ 0x2000 /* When 1 the operation is a read */
#define PTR_NOTEMPTY 0x0800 /* When 1 _do not_ write fifo DATA REG */
/* Data Register */
/* BANK 2 */
#define SMC91111_DATA_REG 0x0008
/* Interrupt Status/Acknowledge Register */
/* BANK 2 */
#define SMC91111_INT_REG 0x000C
/* Interrupt Mask Register */
/* BANK 2 */
#define IM_REG 0x000D
#define IM_MDINT 0x80 /* PHY MI Register 18 Interrupt */
#define IM_ERCV_INT 0x40 /* Early Receive Interrupt */
#define IM_EPH_INT 0x20 /* Set by Etheret Protocol Handler section */
#define IM_RX_OVRN_INT 0x10 /* Set by Receiver Overruns */
#define IM_ALLOC_INT 0x08 /* Set when allocation request is completed */
#define IM_TX_EMPTY_INT 0x04 /* Set if the TX FIFO goes empty */
#define IM_TX_INT 0x02 /* Transmit Interrrupt */
#define IM_RCV_INT 0x01 /* Receive Interrupt */
/* Multicast Table Registers */
/* BANK 3 */
#define MCAST_REG1 0x0000
#define MCAST_REG2 0x0002
#define MCAST_REG3 0x0004
#define MCAST_REG4 0x0006
/* Management Interface Register (MII) */
/* BANK 3 */
#define MII_REG 0x0008
#define MII_MSK_CRS100 0x4000 /* Disables CRS100 detection during tx half dup */
#define MII_MDOE 0x0008 /* MII Output Enable */
#define MII_MCLK 0x0004 /* MII Clock, pin MDCLK */
#define MII_MDI 0x0002 /* MII Input, pin MDI */
#define MII_MDO 0x0001 /* MII Output, pin MDO */
/* Revision Register */
/* BANK 3 */
#define REV_REG 0x000A /* ( hi: chip id low: rev # ) */
/* Early RCV Register */
/* BANK 3 */
/* this is NOT on SMC9192 */
#define ERCV_REG 0x000C
#define ERCV_RCV_DISCRD 0x0080 /* When 1 discards a packet being received */
#define ERCV_THRESHOLD 0x001F /* ERCV Threshold Mask */
/* External Register */
/* BANK 7 */
#define EXT_REG 0x0000
#define CHIP_9192 3
#define CHIP_9194 4
#define CHIP_9195 5
#define CHIP_9196 6
#define CHIP_91100 7
#define CHIP_91100FD 8
#define CHIP_91111FD 9
#if 0
static const char * chip_ids[ 15 ] = {
NULL, NULL, NULL,
/* 3 */ "SMC91C90/91C92",
/* 4 */ "SMC91C94",
/* 5 */ "SMC91C95",
/* 6 */ "SMC91C96",
/* 7 */ "SMC91C100",
/* 8 */ "SMC91C100FD",
/* 9 */ "SMC91C111",
NULL, NULL,
NULL, NULL, NULL};
#endif
/*
. Transmit status bits
*/
#define TS_SUCCESS 0x0001
#define TS_LOSTCAR 0x0400
#define TS_LATCOL 0x0200
#define TS_16COL 0x0010
/*
. Receive status bits
*/
#define RS_ALGNERR 0x8000
#define RS_BRODCAST 0x4000
#define RS_BADCRC 0x2000
#define RS_ODDFRAME 0x1000 /* bug: the LAN91C111 never sets this on receive */
#define RS_TOOLONG 0x0800
#define RS_TOOSHORT 0x0400
#define RS_MULTICAST 0x0001
#define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
/* PHY Types */
enum {
PHY_LAN83C183 = 1, /* LAN91C111 Internal PHY */
PHY_LAN83C180
};
/* PHY Register Addresses (LAN91C111 Internal PHY) */
/* PHY Control Register */
#define PHY_CNTL_REG 0x00
#define PHY_CNTL_RST 0x8000 /* 1=PHY Reset */
#define PHY_CNTL_LPBK 0x4000 /* 1=PHY Loopback */
#define PHY_CNTL_SPEED 0x2000 /* 1=100Mbps, 0=10Mpbs */
#define PHY_CNTL_ANEG_EN 0x1000 /* 1=Enable Auto negotiation */
#define PHY_CNTL_PDN 0x0800 /* 1=PHY Power Down mode */
#define PHY_CNTL_MII_DIS 0x0400 /* 1=MII 4 bit interface disabled */
#define PHY_CNTL_ANEG_RST 0x0200 /* 1=Reset Auto negotiate */
#define PHY_CNTL_DPLX 0x0100 /* 1=Full Duplex, 0=Half Duplex */
#define PHY_CNTL_COLTST 0x0080 /* 1= MII Colision Test */
/* PHY Status Register */
#define PHY_STAT_REG 0x01
#define PHY_STAT_CAP_T4 0x8000 /* 1=100Base-T4 capable */
#define PHY_STAT_CAP_TXF 0x4000 /* 1=100Base-X full duplex capable */
#define PHY_STAT_CAP_TXH 0x2000 /* 1=100Base-X half duplex capable */
#define PHY_STAT_CAP_TF 0x1000 /* 1=10Mbps full duplex capable */
#define PHY_STAT_CAP_TH 0x0800 /* 1=10Mbps half duplex capable */
#define PHY_STAT_CAP_SUPR 0x0040 /* 1=recv mgmt frames with not preamble */
#define PHY_STAT_ANEG_ACK 0x0020 /* 1=ANEG has completed */
#define PHY_STAT_REM_FLT 0x0010 /* 1=Remote Fault detected */
#define PHY_STAT_CAP_ANEG 0x0008 /* 1=Auto negotiate capable */
#define PHY_STAT_LINK 0x0004 /* 1=valid link */
#define PHY_STAT_JAB 0x0002 /* 1=10Mbps jabber condition */
#define PHY_STAT_EXREG 0x0001 /* 1=extended registers implemented */
/* PHY Identifier Registers */
#define PHY_ID1_REG 0x02 /* PHY Identifier 1 */
#define PHY_ID2_REG 0x03 /* PHY Identifier 2 */
/* PHY Auto-Negotiation Advertisement Register */
#define PHY_AD_REG 0x04
#define PHY_AD_NP 0x8000 /* 1=PHY requests exchange of Next Page */
#define PHY_AD_ACK 0x4000 /* 1=got link code word from remote */
#define PHY_AD_RF 0x2000 /* 1=advertise remote fault */
#define PHY_AD_T4 0x0200 /* 1=PHY is capable of 100Base-T4 */
#define PHY_AD_TX_FDX 0x0100 /* 1=PHY is capable of 100Base-TX FDPLX */
#define PHY_AD_TX_HDX 0x0080 /* 1=PHY is capable of 100Base-TX HDPLX */
#define PHY_AD_10_FDX 0x0040 /* 1=PHY is capable of 10Base-T FDPLX */
#define PHY_AD_10_HDX 0x0020 /* 1=PHY is capable of 10Base-T HDPLX */
#define PHY_AD_CSMA 0x0001 /* 1=PHY is capable of 802.3 CMSA */
/* PHY Auto-negotiation Remote End Capability Register */
#define PHY_RMT_REG 0x05
/* Uses same bit definitions as PHY_AD_REG */
/* PHY Configuration Register 1 */
#define PHY_CFG1_REG 0x10
#define PHY_CFG1_LNKDIS 0x8000 /* 1=Rx Link Detect Function disabled */
#define PHY_CFG1_XMTDIS 0x4000 /* 1=TP Transmitter Disabled */
#define PHY_CFG1_XMTPDN 0x2000 /* 1=TP Transmitter Powered Down */
#define PHY_CFG1_BYPSCR 0x0400 /* 1=Bypass scrambler/descrambler */
#define PHY_CFG1_UNSCDS 0x0200 /* 1=Unscramble Idle Reception Disable */
#define PHY_CFG1_EQLZR 0x0100 /* 1=Rx Equalizer Disabled */
#define PHY_CFG1_CABLE 0x0080 /* 1=STP(150ohm), 0=UTP(100ohm) */
#define PHY_CFG1_RLVL0 0x0040 /* 1=Rx Squelch level reduced by 4.5db */
#define PHY_CFG1_TLVL_SHIFT 2 /* Transmit Output Level Adjust */
#define PHY_CFG1_TLVL_MASK 0x003C
#define PHY_CFG1_TRF_MASK 0x0003 /* Transmitter Rise/Fall time */
/* PHY Configuration Register 2 */
#define PHY_CFG2_REG 0x11
#define PHY_CFG2_APOLDIS 0x0020 /* 1=Auto Polarity Correction disabled */
#define PHY_CFG2_JABDIS 0x0010 /* 1=Jabber disabled */
#define PHY_CFG2_MREG 0x0008 /* 1=Multiple register access (MII mgt) */
#define PHY_CFG2_INTMDIO 0x0004 /* 1=Interrupt signaled with MDIO pulseo */
/* PHY Status Output (and Interrupt status) Register */
#define PHY_INT_REG 0x12 /* Status Output (Interrupt Status) */
#define PHY_INT_INT 0x8000 /* 1=bits have changed since last read */
#define PHY_INT_LNKFAIL 0x4000 /* 1=Link Not detected */
#define PHY_INT_LOSSSYNC 0x2000 /* 1=Descrambler has lost sync */
#define PHY_INT_CWRD 0x1000 /* 1=Invalid 4B5B code detected on rx */
#define PHY_INT_SSD 0x0800 /* 1=No Start Of Stream detected on rx */
#define PHY_INT_ESD 0x0400 /* 1=No End Of Stream detected on rx */
#define PHY_INT_RPOL 0x0200 /* 1=Reverse Polarity detected */
#define PHY_INT_JAB 0x0100 /* 1=Jabber detected */
#define PHY_INT_SPDDET 0x0080 /* 1=100Base-TX mode, 0=10Base-T mode */
#define PHY_INT_DPLXDET 0x0040 /* 1=Device in Full Duplex */
/* PHY Interrupt/Status Mask Register */
#define PHY_MASK_REG 0x13 /* Interrupt Mask */
/* Uses the same bit definitions as PHY_INT_REG */
/*-------------------------------------------------------------------------
. I define some macros to make it easier to do somewhat common
. or slightly complicated, repeated tasks.
--------------------------------------------------------------------------*/
/* select a register bank, 0 to 3 */
#define SMC_SELECT_BANK(a,x) { SMC_outw((a), (x), BANK_SELECT ); }
/* this enables an interrupt in the interrupt mask register */
#define SMC_ENABLE_INT(a,x) {\
unsigned char mask;\
SMC_SELECT_BANK((a),2);\
mask = SMC_inb((a), IM_REG );\
mask |= (x);\
SMC_outb( (a), mask, IM_REG ); \
}
/* this disables an interrupt from the interrupt mask register */
#define SMC_DISABLE_INT(a,x) {\
unsigned char mask;\
SMC_SELECT_BANK(2);\
mask = SMC_inb( (a), IM_REG );\
mask &= ~(x);\
SMC_outb( (a), mask, IM_REG ); \
}
/*----------------------------------------------------------------------
. Define the interrupts that I want to receive from the card
.
. I want:
. IM_EPH_INT, for nasty errors
. IM_RCV_INT, for happy received packets
. IM_RX_OVRN_INT, because I have to kick the receiver
. IM_MDINT, for PHY Register 18 Status Changes
--------------------------------------------------------------------------*/
#define SMC_INTERRUPT_MASK (IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT | \
IM_MDINT)
#endif /* _SMC_91111_H_ */
Reference in a new issue View git blame Copy permalink