u-boot/drivers/mtd/spi/sst.c
Mike Frysinger 41e1713425 sf: unify status register writing (and thus block unlocking)
The only two drivers to write the status register do it in the same
way, so unify the implementations.  This also makes the block unlock
logic the same.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-04 23:18:17 -05:00

230 lines
5.1 KiB
C

/*
* Driver for SST serial flashes
*
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* Copyright 2008, Network Appliance Inc.
* Jason McMullan <mcmullan@netapp.com>
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
* Copyright (c) 2008-2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <malloc.h>
#include <spi_flash.h>
#include "spi_flash_internal.h"
#define CMD_SST_BP 0x02 /* Byte Program */
#define CMD_SST_AAI_WP 0xAD /* Auto Address Increment Word Program */
#define SST_SR_WIP (1 << 0) /* Write-in-Progress */
#define SST_SR_WEL (1 << 1) /* Write enable */
#define SST_SR_BP0 (1 << 2) /* Block Protection 0 */
#define SST_SR_BP1 (1 << 3) /* Block Protection 1 */
#define SST_SR_BP2 (1 << 4) /* Block Protection 2 */
#define SST_SR_AAI (1 << 6) /* Addressing mode */
#define SST_SR_BPL (1 << 7) /* BP bits lock */
#define SST_FEAT_WP (1 << 0) /* Supports AAI word program */
#define SST_FEAT_MBP (1 << 1) /* Supports multibyte program */
struct sst_spi_flash_params {
u8 idcode1;
u8 flags;
u16 nr_sectors;
const char *name;
};
struct sst_spi_flash {
struct spi_flash flash;
const struct sst_spi_flash_params *params;
};
static const struct sst_spi_flash_params sst_spi_flash_table[] = {
{
.idcode1 = 0x8d,
.flags = SST_FEAT_WP,
.nr_sectors = 128,
.name = "SST25VF040B",
},{
.idcode1 = 0x8e,
.flags = SST_FEAT_WP,
.nr_sectors = 256,
.name = "SST25VF080B",
},{
.idcode1 = 0x41,
.flags = SST_FEAT_WP,
.nr_sectors = 512,
.name = "SST25VF016B",
},{
.idcode1 = 0x4a,
.flags = SST_FEAT_WP,
.nr_sectors = 1024,
.name = "SST25VF032B",
},{
.idcode1 = 0x4b,
.flags = SST_FEAT_MBP,
.nr_sectors = 2048,
.name = "SST25VF064C",
},{
.idcode1 = 0x01,
.flags = SST_FEAT_WP,
.nr_sectors = 16,
.name = "SST25WF512",
},{
.idcode1 = 0x02,
.flags = SST_FEAT_WP,
.nr_sectors = 32,
.name = "SST25WF010",
},{
.idcode1 = 0x03,
.flags = SST_FEAT_WP,
.nr_sectors = 64,
.name = "SST25WF020",
},{
.idcode1 = 0x04,
.flags = SST_FEAT_WP,
.nr_sectors = 128,
.name = "SST25WF040",
},
};
static int
sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf)
{
int ret;
u8 cmd[4] = {
CMD_SST_BP,
offset >> 16,
offset >> 8,
offset,
};
debug("BP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n",
spi_w8r8(flash->spi, CMD_READ_STATUS), buf, cmd[0], offset);
ret = spi_flash_cmd_write_enable(flash);
if (ret)
return ret;
ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), buf, 1);
if (ret)
return ret;
return spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
}
static int
sst_write_wp(struct spi_flash *flash, u32 offset, size_t len, const void *buf)
{
size_t actual, cmd_len;
int ret;
u8 cmd[4];
ret = spi_claim_bus(flash->spi);
if (ret) {
debug("SF: Unable to claim SPI bus\n");
return ret;
}
/* If the data is not word aligned, write out leading single byte */
actual = offset % 2;
if (actual) {
ret = sst_byte_write(flash, offset, buf);
if (ret)
goto done;
}
offset += actual;
ret = spi_flash_cmd_write_enable(flash);
if (ret)
goto done;
cmd_len = 4;
cmd[0] = CMD_SST_AAI_WP;
cmd[1] = offset >> 16;
cmd[2] = offset >> 8;
cmd[3] = offset;
for (; actual < len - 1; actual += 2) {
debug("WP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n",
spi_w8r8(flash->spi, CMD_READ_STATUS), buf + actual, cmd[0],
offset);
ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len,
buf + actual, 2);
if (ret) {
debug("SF: sst word program failed\n");
break;
}
ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
if (ret)
break;
cmd_len = 1;
offset += 2;
}
if (!ret)
ret = spi_flash_cmd_write_disable(flash);
/* If there is a single trailing byte, write it out */
if (!ret && actual != len)
ret = sst_byte_write(flash, offset, buf + actual);
done:
debug("SF: sst: program %s %zu bytes @ 0x%zx\n",
ret ? "failure" : "success", len, offset - actual);
spi_release_bus(flash->spi);
return ret;
}
struct spi_flash *
spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode)
{
const struct sst_spi_flash_params *params;
struct sst_spi_flash *stm;
size_t i;
for (i = 0; i < ARRAY_SIZE(sst_spi_flash_table); ++i) {
params = &sst_spi_flash_table[i];
if (params->idcode1 == idcode[2])
break;
}
if (i == ARRAY_SIZE(sst_spi_flash_table)) {
debug("SF: Unsupported SST ID %02x\n", idcode[1]);
return NULL;
}
stm = malloc(sizeof(*stm));
if (!stm) {
debug("SF: Failed to allocate memory\n");
return NULL;
}
stm->params = params;
stm->flash.spi = spi;
stm->flash.name = params->name;
if (stm->params->flags & SST_FEAT_WP)
stm->flash.write = sst_write_wp;
else
stm->flash.write = spi_flash_cmd_write_multi;
stm->flash.erase = spi_flash_cmd_erase;
stm->flash.read = spi_flash_cmd_read_fast;
stm->flash.page_size = 256;
stm->flash.sector_size = 4096;
stm->flash.size = stm->flash.sector_size * params->nr_sectors;
/* Flash powers up read-only, so clear BP# bits */
spi_flash_cmd_write_status(&stm->flash, 0);
return &stm->flash;
}