u-boot/configs/mx7ulp_com_defconfig
Fabio Estevam 0417ef17ac mx7ulp: Add support for Embedded Artists COM board
The Embedded Artists COM board is based on NXP i.MX7ULP.

It has a BD70528 PMIC from Rohm with discrete DCDC powering option and
improved current observability (compared to the existing NXP i.MX7ULP EVK).

Add the initial support for the board.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-01-07 10:26:56 +01:00

60 lines
1.4 KiB
Text

CONFIG_ARM=y
CONFIG_ARCH_MX7ULP=y
CONFIG_SYS_TEXT_BASE=0x67800000
CONFIG_LDO_ENABLED_MODE=y
CONFIG_TARGET_MX7ULP_COM=y
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xC0000
CONFIG_NR_DRAM_BANKS=1
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/ea/mx7ulp_com/imximage.cfg"
CONFIG_DEFAULT_FDT_FILE="imx7ulp-com"
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_READ=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-com"
CONFIG_ENV_IS_IN_MMC=y
# CONFIG_NET is not set
CONFIG_DM=y
CONFIG_DM_GPIO=y
CONFIG_IMX_RGPIO2P=y
# CONFIG_MXC_GPIO is not set
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_IMX_LPI2C=y
CONFIG_DM_MMC=y
CONFIG_FSL_USDHC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=40000000
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7ULP=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_QSPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="FSL"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_ULP_WATCHDOG=y