mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 09:30:10 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
488 lines
16 KiB
C
488 lines
16 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2008-2013 Eric Jarrige <eric.jarrige@armadeus.org>
|
|
*/
|
|
|
|
#ifndef __APF27_H
|
|
#define __APF27_H
|
|
|
|
/* FPGA program pin configuration */
|
|
#define ACFG_FPGA_PWR (GPIO_PORTF | 19) /* FPGA prog pin */
|
|
#define ACFG_FPGA_PRG (GPIO_PORTF | 11) /* FPGA prog pin */
|
|
#define ACFG_FPGA_CLK (GPIO_PORTF | 15) /* FPGA clk pin */
|
|
#define ACFG_FPGA_RDATA 0xD6000000 /* FPGA data addr */
|
|
#define ACFG_FPGA_WDATA 0xD6000000 /* FPGA data addr */
|
|
#define ACFG_FPGA_INIT (GPIO_PORTF | 12) /* FPGA init pin */
|
|
#define ACFG_FPGA_DONE (GPIO_PORTF | 9) /* FPGA done pin */
|
|
#define ACFG_FPGA_RW (GPIO_PORTF | 21) /* FPGA done pin */
|
|
#define ACFG_FPGA_CS (GPIO_PORTF | 22) /* FPGA done pin */
|
|
#define ACFG_FPGA_SUSPEND (GPIO_PORTF | 10) /* FPGA done pin */
|
|
#define ACFG_FPGA_RESET (GPIO_PORTF | 7) /* FPGA done pin */
|
|
|
|
/* MMC pin */
|
|
#define PC_PWRON (GPIO_PORTF | 16)
|
|
|
|
/*
|
|
* MPU CLOCK source before PLL
|
|
* ACFG_CLK_FREQ (2/3 MPLL clock or ext 266 MHZ)
|
|
*/
|
|
#define ACFG_MPCTL0_VAL 0x01EF15D5 /* 399.000 MHz */
|
|
#define ACFG_MPCTL1_VAL 0
|
|
#define CONFIG_MPLL_FREQ 399
|
|
|
|
#define ACFG_CLK_FREQ (CONFIG_MPLL_FREQ*2/3) /* 266 MHz */
|
|
|
|
/* Serial clock source before PLL (should be named ACFG_SYSPLL_CLK_FREQ)*/
|
|
#define ACFG_SPCTL0_VAL 0x0475206F /* 299.99937 MHz */
|
|
#define ACFG_SPCTL1_VAL 0
|
|
#define CONFIG_SPLL_FREQ 300 /* MHz */
|
|
|
|
/* ARM bus frequency (have to be a CONFIG_MPLL_FREQ ratio) */
|
|
#define CONFIG_ARM_FREQ 399 /* up to 400 MHz */
|
|
|
|
/* external bus frequency (have to be a ACFG_CLK_FREQ ratio) */
|
|
#define CONFIG_HCLK_FREQ 133 /* (ACFG_CLK_FREQ/2) */
|
|
|
|
#define CONFIG_PERIF1_FREQ 16 /* 16.625 MHz UART, GPT, PWM */
|
|
#define CONFIG_PERIF2_FREQ 33 /* 33.25 MHz CSPI and SDHC */
|
|
#define CONFIG_PERIF3_FREQ 33 /* 33.25 MHz LCD */
|
|
#define CONFIG_PERIF4_FREQ 33 /* 33.25 MHz CSI */
|
|
#define CONFIG_SSI1_FREQ 66 /* 66.50 MHz SSI1 */
|
|
#define CONFIG_SSI2_FREQ 66 /* 66.50 MHz SSI2 */
|
|
#define CONFIG_MSHC_FREQ 66 /* 66.50 MHz MSHC */
|
|
#define CONFIG_H264_FREQ 66 /* 66.50 MHz H264 */
|
|
#define CONFIG_CLK0_DIV 3 /* Divide CLK0 by 4 */
|
|
#define CONFIG_CLK0_EN 1 /* CLK0 enabled */
|
|
|
|
/* external bus frequency (have to be a CONFIG_HCLK_FREQ ratio) */
|
|
#define CONFIG_NFC_FREQ 44 /* NFC Clock up to 44 MHz wh 133MHz */
|
|
|
|
/* external serial bus frequency (have to be a CONFIG_SPLL_FREQ ratio) */
|
|
#define CONFIG_USB_FREQ 60 /* 60 MHz */
|
|
|
|
/*
|
|
* SDRAM
|
|
*/
|
|
#if (ACFG_SDRAM_MBYTE_SYZE == 64) /* micron MT46H16M32LF -6 */
|
|
/* micron 64MB */
|
|
#define ACFG_SDRAM_NUM_COL 9 /* 8, 9, 10 or 11
|
|
* column address bits
|
|
*/
|
|
#define ACFG_SDRAM_NUM_ROW 13 /* 11, 12 or 13
|
|
* row address bits
|
|
*/
|
|
#define ACFG_SDRAM_REFRESH 3 /* 0=OFF 1=2048
|
|
* 2=4096 3=8192 refresh
|
|
*/
|
|
#define ACFG_SDRAM_EXIT_PWD 25 /* ns exit power
|
|
* down delay
|
|
*/
|
|
#define ACFG_SDRAM_W2R_DELAY 1 /* write to read
|
|
* cycle delay > 0
|
|
*/
|
|
#define ACFG_SDRAM_ROW_PRECHARGE_DELAY 18 /* ns */
|
|
#define ACFG_SDRAM_TMRD_DELAY 2 /* Load mode register
|
|
* cycle delay 1..4
|
|
*/
|
|
#define ACFG_SDRAM_TWR_DELAY 1 /* LPDDR: 0=2ck 1=3ck
|
|
* SDRAM: 0=1ck 1=2ck
|
|
*/
|
|
#define ACFG_SDRAM_RAS_DELAY 42 /* ns ACTIVE-to-PRECHARGE delay */
|
|
#define ACFG_SDRAM_RRD_DELAY 12 /* ns ACTIVE-to-ACTIVE delay */
|
|
#define ACFG_SDRAM_RCD_DELAY 18 /* ns Row to Column delay */
|
|
#define ACFG_SDRAM_RC_DELAY 70 /* ns Row cycle delay (tRFC
|
|
* refresh to command)
|
|
*/
|
|
#define ACFG_SDRAM_CLOCK_CYCLE_CL_1 0 /* ns clock cycle time
|
|
* estimated fo CL=1
|
|
* 0=force 3 for lpddr
|
|
*/
|
|
#define ACFG_SDRAM_PARTIAL_ARRAY_SR 0 /* 0=full 1=half 2=quater
|
|
* 3=Eighth 4=Sixteenth
|
|
*/
|
|
#define ACFG_SDRAM_DRIVE_STRENGH 0 /* 0=Full-strength 1=half
|
|
* 2=quater 3=Eighth
|
|
*/
|
|
#define ACFG_SDRAM_BURST_LENGTH 3 /* 2^N BYTES (N=0..3) */
|
|
#define ACFG_SDRAM_SINGLE_ACCESS 0 /* 1= single access
|
|
* 0 = Burst mode
|
|
*/
|
|
#endif
|
|
|
|
#if (ACFG_SDRAM_MBYTE_SYZE == 128)
|
|
/* micron 128MB */
|
|
#define ACFG_SDRAM_NUM_COL 9 /* 8, 9, 10 or 11
|
|
* column address bits
|
|
*/
|
|
#define ACFG_SDRAM_NUM_ROW 14 /* 11, 12 or 13
|
|
* row address bits
|
|
*/
|
|
#define ACFG_SDRAM_REFRESH 3 /* 0=OFF 1=2048
|
|
* 2=4096 3=8192 refresh
|
|
*/
|
|
#define ACFG_SDRAM_EXIT_PWD 25 /* ns exit power
|
|
* down delay
|
|
*/
|
|
#define ACFG_SDRAM_W2R_DELAY 1 /* write to read
|
|
* cycle delay > 0
|
|
*/
|
|
#define ACFG_SDRAM_ROW_PRECHARGE_DELAY 18 /* ns */
|
|
#define ACFG_SDRAM_TMRD_DELAY 2 /* Load mode register
|
|
* cycle delay 1..4
|
|
*/
|
|
#define ACFG_SDRAM_TWR_DELAY 1 /* LPDDR: 0=2ck 1=3ck
|
|
* SDRAM: 0=1ck 1=2ck
|
|
*/
|
|
#define ACFG_SDRAM_RAS_DELAY 42 /* ns ACTIVE-to-PRECHARGE delay */
|
|
#define ACFG_SDRAM_RRD_DELAY 12 /* ns ACTIVE-to-ACTIVE delay */
|
|
#define ACFG_SDRAM_RCD_DELAY 18 /* ns Row to Column delay */
|
|
#define ACFG_SDRAM_RC_DELAY 70 /* ns Row cycle delay (tRFC
|
|
* refresh to command)
|
|
*/
|
|
#define ACFG_SDRAM_CLOCK_CYCLE_CL_1 0 /* ns clock cycle time
|
|
* estimated fo CL=1
|
|
* 0=force 3 for lpddr
|
|
*/
|
|
#define ACFG_SDRAM_PARTIAL_ARRAY_SR 0 /* 0=full 1=half 2=quater
|
|
* 3=Eighth 4=Sixteenth
|
|
*/
|
|
#define ACFG_SDRAM_DRIVE_STRENGH 0 /* 0=Full-strength 1=half
|
|
* 2=quater 3=Eighth
|
|
*/
|
|
#define ACFG_SDRAM_BURST_LENGTH 3 /* 2^N BYTES (N=0..3) */
|
|
#define ACFG_SDRAM_SINGLE_ACCESS 0 /* 1= single access
|
|
* 0 = Burst mode
|
|
*/
|
|
#endif
|
|
|
|
#if (ACFG_SDRAM_MBYTE_SYZE == 256)
|
|
/* micron 256MB */
|
|
#define ACFG_SDRAM_NUM_COL 10 /* 8, 9, 10 or 11
|
|
* column address bits
|
|
*/
|
|
#define ACFG_SDRAM_NUM_ROW 14 /* 11, 12 or 13
|
|
* row address bits
|
|
*/
|
|
#define ACFG_SDRAM_REFRESH 3 /* 0=OFF 1=2048
|
|
* 2=4096 3=8192 refresh
|
|
*/
|
|
#define ACFG_SDRAM_EXIT_PWD 25 /* ns exit power
|
|
* down delay
|
|
*/
|
|
#define ACFG_SDRAM_W2R_DELAY 1 /* write to read cycle
|
|
* delay > 0
|
|
*/
|
|
#define ACFG_SDRAM_ROW_PRECHARGE_DELAY 18 /* ns */
|
|
#define ACFG_SDRAM_TMRD_DELAY 2 /* Load mode register
|
|
* cycle delay 1..4
|
|
*/
|
|
#define ACFG_SDRAM_TWR_DELAY 1 /* LPDDR: 0=2ck 1=3ck
|
|
* SDRAM: 0=1ck 1=2ck
|
|
*/
|
|
#define ACFG_SDRAM_RAS_DELAY 42 /* ns ACTIVE-to-PRECHARGE delay */
|
|
#define ACFG_SDRAM_RRD_DELAY 12 /* ns ACTIVE-to-ACTIVE delay */
|
|
#define ACFG_SDRAM_RCD_DELAY 18 /* ns Row to Column delay */
|
|
#define ACFG_SDRAM_RC_DELAY 70 /* ns Row cycle delay (tRFC
|
|
* refresh to command)
|
|
*/
|
|
#define ACFG_SDRAM_CLOCK_CYCLE_CL_1 0 /* ns clock cycle time
|
|
* estimated fo CL=1
|
|
* 0=force 3 for lpddr
|
|
*/
|
|
#define ACFG_SDRAM_PARTIAL_ARRAY_SR 0 /* 0=full 1=half 2=quater
|
|
* 3=Eighth 4=Sixteenth
|
|
*/
|
|
#define ACFG_SDRAM_DRIVE_STRENGH 0 /* 0=Full-strength
|
|
* 1=half
|
|
* 2=quater
|
|
* 3=Eighth
|
|
*/
|
|
#define ACFG_SDRAM_BURST_LENGTH 3 /* 2^N BYTES (N=0..3) */
|
|
#define ACFG_SDRAM_SINGLE_ACCESS 0 /* 1= single access
|
|
* 0 = Burst mode
|
|
*/
|
|
#endif
|
|
|
|
/*
|
|
* External interface
|
|
*/
|
|
/*
|
|
* CSCRxU_VAL:
|
|
* 31| x | x | x x |x x x x| x x | x | x |x x x x|16
|
|
* |SP |WP | BCD | BCS | PSZ |PME|SYNC| DOL |
|
|
*
|
|
* 15| x x | x x x x x x | x | x x x x | x x x x |0
|
|
* | CNC | WSC |EW | WWS | EDC |
|
|
*
|
|
* CSCRxL_VAL:
|
|
* 31| x x x x | x x x x | x x x x | x x x x |16
|
|
* | OEA | OEN | EBWA | EBWN |
|
|
* 15|x x x x| x |x x x |x x x x| x | x | x | x | 0
|
|
* | CSA |EBC| DSZ | CSN |PSR|CRE|WRAP|CSEN|
|
|
*
|
|
* CSCRxA_VAL:
|
|
* 31| x x x x | x x x x | x x x x | x x x x |16
|
|
* | EBRA | EBRN | RWA | RWN |
|
|
* 15| x | x x |x x x|x x|x x|x x| x | x | x | x | 0
|
|
* |MUM| LAH | LBN |LBA|DWW|DCT|WWU|AGE|CNC2|FCE|
|
|
*/
|
|
|
|
/* CS0 configuration for 16 bit nor flash */
|
|
#define ACFG_CS0U_VAL 0x0000CC03
|
|
#define ACFG_CS0L_VAL 0xa0330D01
|
|
#define ACFG_CS0A_VAL 0x00220800
|
|
|
|
#define ACFG_CS1U_VAL 0x00000f00
|
|
#define ACFG_CS1L_VAL 0x00000D01
|
|
#define ACFG_CS1A_VAL 0
|
|
|
|
#define ACFG_CS2U_VAL 0
|
|
#define ACFG_CS2L_VAL 0
|
|
#define ACFG_CS2A_VAL 0
|
|
|
|
#define ACFG_CS3U_VAL 0
|
|
#define ACFG_CS3L_VAL 0
|
|
#define ACFG_CS3A_VAL 0
|
|
|
|
#define ACFG_CS4U_VAL 0
|
|
#define ACFG_CS4L_VAL 0
|
|
#define ACFG_CS4A_VAL 0
|
|
|
|
/* FPGA 16 bit data bus */
|
|
#define ACFG_CS5U_VAL 0x00000600
|
|
#define ACFG_CS5L_VAL 0x00000D01
|
|
#define ACFG_CS5A_VAL 0
|
|
|
|
#define ACFG_EIM_VAL 0x00002200
|
|
|
|
|
|
/*
|
|
* FPGA specific settings
|
|
*/
|
|
|
|
/* CLKO */
|
|
#define ACFG_CCSR_VAL 0x00000305
|
|
/* drive strength CLKO set to 2 */
|
|
#define ACFG_DSCR10_VAL 0x00020000
|
|
/* drive strength A1..A12 set to 2 */
|
|
#define ACFG_DSCR3_VAL 0x02AAAAA8
|
|
/* drive strength ctrl */
|
|
#define ACFG_DSCR7_VAL 0x00020880
|
|
/* drive strength data */
|
|
#define ACFG_DSCR2_VAL 0xAAAAAAAA
|
|
|
|
|
|
/*
|
|
* Default configuration for GPIOs and peripherals
|
|
*/
|
|
#define ACFG_DDIR_A_VAL 0x00000000
|
|
#define ACFG_OCR1_A_VAL 0x00000000
|
|
#define ACFG_OCR2_A_VAL 0x00000000
|
|
#define ACFG_ICFA1_A_VAL 0xFFFFFFFF
|
|
#define ACFG_ICFA2_A_VAL 0xFFFFFFFF
|
|
#define ACFG_ICFB1_A_VAL 0xFFFFFFFF
|
|
#define ACFG_ICFB2_A_VAL 0xFFFFFFFF
|
|
#define ACFG_DR_A_VAL 0x00000000
|
|
#define ACFG_GIUS_A_VAL 0xFFFFFFFF
|
|
#define ACFG_ICR1_A_VAL 0x00000000
|
|
#define ACFG_ICR2_A_VAL 0x00000000
|
|
#define ACFG_IMR_A_VAL 0x00000000
|
|
#define ACFG_GPR_A_VAL 0x00000000
|
|
#define ACFG_PUEN_A_VAL 0xFFFFFFFF
|
|
|
|
#define ACFG_DDIR_B_VAL 0x00000000
|
|
#define ACFG_OCR1_B_VAL 0x00000000
|
|
#define ACFG_OCR2_B_VAL 0x00000000
|
|
#define ACFG_ICFA1_B_VAL 0xFFFFFFFF
|
|
#define ACFG_ICFA2_B_VAL 0xFFFFFFFF
|
|
#define ACFG_ICFB1_B_VAL 0xFFFFFFFF
|
|
#define ACFG_ICFB2_B_VAL 0xFFFFFFFF
|
|
#define ACFG_DR_B_VAL 0x00000000
|
|
#define ACFG_GIUS_B_VAL 0xFF3FFFF0
|
|
#define ACFG_ICR1_B_VAL 0x00000000
|
|
#define ACFG_ICR2_B_VAL 0x00000000
|
|
#define ACFG_IMR_B_VAL 0x00000000
|
|
#define ACFG_GPR_B_VAL 0x00000000
|
|
#define ACFG_PUEN_B_VAL 0xFFFFFFFF
|
|
|
|
#define ACFG_DDIR_C_VAL 0x00000000
|
|
#define ACFG_OCR1_C_VAL 0x00000000
|
|
#define ACFG_OCR2_C_VAL 0x00000000
|
|
#define ACFG_ICFA1_C_VAL 0xFFFFFFFF
|
|
#define ACFG_ICFA2_C_VAL 0xFFFFFFFF
|
|
#define ACFG_ICFB1_C_VAL 0xFFFFFFFF
|
|
#define ACFG_ICFB2_C_VAL 0xFFFFFFFF
|
|
#define ACFG_DR_C_VAL 0x00000000
|
|
#define ACFG_GIUS_C_VAL 0xFFFFC07F
|
|
#define ACFG_ICR1_C_VAL 0x00000000
|
|
#define ACFG_ICR2_C_VAL 0x00000000
|
|
#define ACFG_IMR_C_VAL 0x00000000
|
|
#define ACFG_GPR_C_VAL 0x00000000
|
|
#define ACFG_PUEN_C_VAL 0xFFFFFF87
|
|
|
|
#define ACFG_DDIR_D_VAL 0x00000000
|
|
#define ACFG_OCR1_D_VAL 0x00000000
|
|
#define ACFG_OCR2_D_VAL 0x00000000
|
|
#define ACFG_ICFA1_D_VAL 0xFFFFFFFF
|
|
#define ACFG_ICFA2_D_VAL 0xFFFFFFFF
|
|
#define ACFG_ICFB1_D_VAL 0xFFFFFFFF
|
|
#define ACFG_ICFB2_D_VAL 0xFFFFFFFF
|
|
#define ACFG_DR_D_VAL 0x00000000
|
|
#define ACFG_GIUS_D_VAL 0xFFFFFFFF
|
|
#define ACFG_ICR1_D_VAL 0x00000000
|
|
#define ACFG_ICR2_D_VAL 0x00000000
|
|
#define ACFG_IMR_D_VAL 0x00000000
|
|
#define ACFG_GPR_D_VAL 0x00000000
|
|
#define ACFG_PUEN_D_VAL 0xFFFFFFFF
|
|
|
|
#define ACFG_DDIR_E_VAL 0x00000000
|
|
#define ACFG_OCR1_E_VAL 0x00000000
|
|
#define ACFG_OCR2_E_VAL 0x00000000
|
|
#define ACFG_ICFA1_E_VAL 0xFFFFFFFF
|
|
#define ACFG_ICFA2_E_VAL 0xFFFFFFFF
|
|
#define ACFG_ICFB1_E_VAL 0xFFFFFFFF
|
|
#define ACFG_ICFB2_E_VAL 0xFFFFFFFF
|
|
#define ACFG_DR_E_VAL 0x00000000
|
|
#define ACFG_GIUS_E_VAL 0xFCFFCCF8
|
|
#define ACFG_ICR1_E_VAL 0x00000000
|
|
#define ACFG_ICR2_E_VAL 0x00000000
|
|
#define ACFG_IMR_E_VAL 0x00000000
|
|
#define ACFG_GPR_E_VAL 0x00000000
|
|
#define ACFG_PUEN_E_VAL 0xFFFFFFFF
|
|
|
|
#define ACFG_DDIR_F_VAL 0x00000000
|
|
#define ACFG_OCR1_F_VAL 0x00000000
|
|
#define ACFG_OCR2_F_VAL 0x00000000
|
|
#define ACFG_ICFA1_F_VAL 0xFFFFFFFF
|
|
#define ACFG_ICFA2_F_VAL 0xFFFFFFFF
|
|
#define ACFG_ICFB1_F_VAL 0xFFFFFFFF
|
|
#define ACFG_ICFB2_F_VAL 0xFFFFFFFF
|
|
#define ACFG_DR_F_VAL 0x00000000
|
|
#define ACFG_GIUS_F_VAL 0xFF7F8000
|
|
#define ACFG_ICR1_F_VAL 0x00000000
|
|
#define ACFG_ICR2_F_VAL 0x00000000
|
|
#define ACFG_IMR_F_VAL 0x00000000
|
|
#define ACFG_GPR_F_VAL 0x00000000
|
|
#define ACFG_PUEN_F_VAL 0xFFFFFFFF
|
|
|
|
/* Enforce DDR signal strengh & enable USB/PP/DMA burst override bits */
|
|
#define ACFG_GPCR_VAL 0x0003000F
|
|
|
|
#define ACFG_ESDMISC_VAL ESDMISC_LHD+ESDMISC_MDDREN
|
|
|
|
/* FMCR select num LPDDR RAMs and nand 16bits, 2KB pages */
|
|
#if (CONFIG_NR_DRAM_BANKS == 1)
|
|
#define ACFG_FMCR_VAL 0xFFFFFFF9
|
|
#elif (CONFIG_NR_DRAM_BANKS == 2)
|
|
#define ACFG_FMCR_VAL 0xFFFFFFFB
|
|
#endif
|
|
|
|
#define ACFG_AIPI1_PSR0_VAL 0x20040304
|
|
#define ACFG_AIPI1_PSR1_VAL 0xDFFBFCFB
|
|
#define ACFG_AIPI2_PSR0_VAL 0x00000000
|
|
#define ACFG_AIPI2_PSR1_VAL 0xFFFFFFFF
|
|
|
|
/* PCCR enable DMA FEC I2C1 IIM SDHC1 */
|
|
#define ACFG_PCCR0_VAL 0x05070410
|
|
#define ACFG_PCCR1_VAL 0xA14A0608
|
|
|
|
/*
|
|
* From here, there should not be any user configuration.
|
|
* All Equations are automatic
|
|
*/
|
|
|
|
/* fixme none integer value (7.5ns) => 2*hclock = 15ns */
|
|
#define ACFG_2XHCLK_LGTH (2000/CONFIG_HCLK_FREQ) /* ns */
|
|
|
|
/* USB 60 MHz ; ARM up to 400; HClK up to 133MHz*/
|
|
#define CSCR_MASK 0x0300800D
|
|
|
|
#define ACFG_CSCR_VAL \
|
|
(CSCR_MASK \
|
|
|((((CONFIG_SPLL_FREQ/CONFIG_USB_FREQ)-1)&0x07) << 28) \
|
|
|((((CONFIG_MPLL_FREQ/CONFIG_ARM_FREQ)-1)&0x03) << 12) \
|
|
|((((ACFG_CLK_FREQ/CONFIG_HCLK_FREQ)-1)&0x03) << 8))
|
|
|
|
/* SSIx CLKO NFC H264 MSHC */
|
|
#define ACFG_PCDR0_VAL\
|
|
(((((ACFG_CLK_FREQ/CONFIG_MSHC_FREQ)-1)&0x3F)<<0) \
|
|
|((((CONFIG_HCLK_FREQ/CONFIG_NFC_FREQ)-1)&0x0F)<<6) \
|
|
|(((((ACFG_CLK_FREQ/CONFIG_H264_FREQ)-2)*2)&0x3F)<<10)\
|
|
|(((((ACFG_CLK_FREQ/CONFIG_SSI1_FREQ)-2)*2)&0x3F)<<16)\
|
|
|(((CONFIG_CLK0_DIV)&0x07)<<22)\
|
|
|(((CONFIG_CLK0_EN)&0x01)<<25)\
|
|
|(((((ACFG_CLK_FREQ/CONFIG_SSI2_FREQ)-2)*2)&0x3F)<<26))
|
|
|
|
/* PERCLKx */
|
|
#define ACFG_PCDR1_VAL\
|
|
(((((ACFG_CLK_FREQ/CONFIG_PERIF1_FREQ)-1)&0x3F)<<0) \
|
|
|((((ACFG_CLK_FREQ/CONFIG_PERIF2_FREQ)-1)&0x3F)<<8) \
|
|
|((((ACFG_CLK_FREQ/CONFIG_PERIF3_FREQ)-1)&0x3F)<<16) \
|
|
|((((ACFG_CLK_FREQ/CONFIG_PERIF4_FREQ)-1)&0x3F)<<24))
|
|
|
|
/* SDRAM controller programming Values */
|
|
#if (((2*ACFG_SDRAM_CLOCK_CYCLE_CL_1) > (3*ACFG_2XHCLK_LGTH)) || \
|
|
(ACFG_SDRAM_CLOCK_CYCLE_CL_1 < 1))
|
|
#define REG_FIELD_SCL_VAL 3
|
|
#define REG_FIELD_SCLIMX_VAL 0
|
|
#else
|
|
#define REG_FIELD_SCL_VAL\
|
|
((2*ACFG_SDRAM_CLOCK_CYCLE_CL_1+ACFG_2XHCLK_LGTH-1)/ \
|
|
ACFG_2XHCLK_LGTH)
|
|
#define REG_FIELD_SCLIMX_VAL REG_FIELD_SCL_VAL
|
|
#endif
|
|
|
|
#if ((2*ACFG_SDRAM_RC_DELAY) > (16*ACFG_2XHCLK_LGTH))
|
|
#define REG_FIELD_SRC_VAL 0
|
|
#else
|
|
#define REG_FIELD_SRC_VAL\
|
|
((2*ACFG_SDRAM_RC_DELAY+ACFG_2XHCLK_LGTH-1)/ \
|
|
ACFG_2XHCLK_LGTH)
|
|
#endif
|
|
|
|
/* TBD Power down timer ; PRCT Bit Field Encoding; burst length 8 ; FP = 0*/
|
|
#define REG_ESDCTL_BASE_CONFIG (0x80020485\
|
|
| (((ACFG_SDRAM_NUM_ROW-11)&0x7)<<24)\
|
|
| (((ACFG_SDRAM_NUM_COL-8)&0x3)<<20)\
|
|
| (((ACFG_SDRAM_REFRESH)&0x7)<<13))
|
|
|
|
#define ACFG_NORMAL_RW_CMD ((0x0<<28)+REG_ESDCTL_BASE_CONFIG)
|
|
#define ACFG_PRECHARGE_CMD ((0x1<<28)+REG_ESDCTL_BASE_CONFIG)
|
|
#define ACFG_AUTOREFRESH_CMD ((0x2<<28)+REG_ESDCTL_BASE_CONFIG)
|
|
#define ACFG_SET_MODE_REG_CMD ((0x3<<28)+REG_ESDCTL_BASE_CONFIG)
|
|
|
|
/* ESDRAMC Configuration Registers : force CL=3 to lpddr */
|
|
#define ACFG_SDRAM_ESDCFG_REGISTER_VAL (0x0\
|
|
| (((((2*ACFG_SDRAM_EXIT_PWD+ACFG_2XHCLK_LGTH-1)/ \
|
|
ACFG_2XHCLK_LGTH)-1)&0x3)<<21)\
|
|
| (((ACFG_SDRAM_W2R_DELAY-1)&0x1)<<20)\
|
|
| (((((2*ACFG_SDRAM_ROW_PRECHARGE_DELAY+ \
|
|
ACFG_2XHCLK_LGTH-1)/ACFG_2XHCLK_LGTH)-1)&0x3)<<18) \
|
|
| (((ACFG_SDRAM_TMRD_DELAY-1)&0x3)<<16)\
|
|
| (((ACFG_SDRAM_TWR_DELAY)&0x1)<<15)\
|
|
| (((((2*ACFG_SDRAM_RAS_DELAY+ACFG_2XHCLK_LGTH-1)/ \
|
|
ACFG_2XHCLK_LGTH)-1)&0x7)<<12) \
|
|
| (((((2*ACFG_SDRAM_RRD_DELAY+ACFG_2XHCLK_LGTH-1)/ \
|
|
ACFG_2XHCLK_LGTH)-1)&0x3)<<10) \
|
|
| (((REG_FIELD_SCLIMX_VAL)&0x3)<<8)\
|
|
| (((((2*ACFG_SDRAM_RCD_DELAY+ACFG_2XHCLK_LGTH-1)/ \
|
|
ACFG_2XHCLK_LGTH)-1)&0x7)<<4) \
|
|
| (((REG_FIELD_SRC_VAL)&0x0F)<<0))
|
|
|
|
/* Issue Mode register Command to SDRAM */
|
|
#define ACFG_SDRAM_MODE_REGISTER_VAL\
|
|
((((ACFG_SDRAM_BURST_LENGTH)&0x7)<<(0))\
|
|
| (((REG_FIELD_SCL_VAL)&0x7)<<(4))\
|
|
| ((0)<<(3)) /* sequentiql access */ \
|
|
/*| (((ACFG_SDRAM_SINGLE_ACCESS)&0x1)<<(1))*/)
|
|
|
|
/* Issue Extended Mode register Command to SDRAM */
|
|
#define ACFG_SDRAM_EXT_MODE_REGISTER_VAL\
|
|
((ACFG_SDRAM_PARTIAL_ARRAY_SR<<0)\
|
|
| (ACFG_SDRAM_DRIVE_STRENGH<<(5))\
|
|
| (1<<(ACFG_SDRAM_NUM_COL+ACFG_SDRAM_NUM_ROW+1+2)))
|
|
|
|
/* Issue Precharge all Command to SDRAM */
|
|
#define ACFG_SDRAM_PRECHARGE_ALL_VAL (1<<10)
|
|
|
|
#endif /* __APF27_H */
|