u-boot/board/esd/pmc405/pmc405.c
Matthias Fuchs 97b0734d65 ppc4xx: Remove obsolete or unused functions from some esd boards
This patch removes initdram() and testdram() from most esd 405 platforms.
Some boards also have an empty dummy implementation of
misc_init_f(). This is also removed.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-03 14:37:52 +02:00

208 lines
4.8 KiB
C

/*
* (C) Copyright 2001-2003
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* (C) Copyright 2005
* Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/processor.h>
#include <command.h>
#include <malloc.h>
DECLARE_GLOBAL_DATA_PTR;
extern void lxt971_no_sleep(void);
/* fpga configuration data - not compressed, generated by bin2c */
const unsigned char fpgadata[] =
{
#include "fpgadata.c"
};
int filesize = sizeof(fpgadata);
int board_early_init_f (void)
{
/*
* IRQ 0-15 405GP internally generated; active high; level sensitive
* IRQ 16 405GP internally generated; active low; level sensitive
* IRQ 17-24 RESERVED
* IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
* IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
* IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
* IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
* IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
mtdcr(uicer, 0x00000000); /* disable all ints */
mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */
mtdcr(uictr, 0x10000000); /* set int trigger levels */
mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
*/
mtebc (epcr, 0xa8400000);
/*
* Setup GPIO pins
*/
mtdcr(cntrl0, mfdcr(cntrl0) | ((CFG_FPGA_INIT | \
CFG_FPGA_DONE | \
CFG_XEREADY | \
CFG_NONMONARCH | \
CFG_REV1_2) << 5));
if (!(in32(GPIO0_IR) & CFG_REV1_2)) {
/* rev 1.2 boards */
mtdcr(cntrl0, mfdcr(cntrl0) | ((CFG_INTA_FAKE | \
CFG_SELF_RST) << 5));
}
out32(GPIO0_OR, 0);
out32(GPIO0_TCR, CFG_FPGA_PRG | CFG_FPGA_CLK | CFG_FPGA_DATA | CFG_XEREADY); /* setup for output */
/* - check if rev1_2 is low, then:
* - set/reset CFG_INTA_FAKE/CFG_SELF_RST in TCR to assert INTA# or SELFRST#
*/
return 0;
}
/* ------------------------------------------------------------------------- */
int misc_init_r (void)
{
/* adjust flash start and offset */
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
gd->bd->bi_flashoffset = 0;
out32(GPIO0_OR, in32(GPIO0_OR) | CFG_XEREADY); /* deassert EREADY# */
return (0);
}
ushort pmc405_pci_subsys_deviceid(void)
{
ulong val;
val = in32(GPIO0_IR);
if (!(val & CFG_REV1_2)) { /* low=rev1.2 */
if (val & CFG_NONMONARCH) { /* monarch# signal */
return CFG_PCI_SUBSYS_DEVICEID_NONMONARCH;
}
return CFG_PCI_SUBSYS_DEVICEID_MONARCH;
}
return CFG_PCI_SUBSYS_DEVICEID_NONMONARCH;
}
/*
* Check Board Identity:
*/
int checkboard (void)
{
ulong val;
char str[64];
int i = getenv_r ("serial#", str, sizeof(str));
puts ("Board: ");
if (i == -1) {
puts ("### No HW ID - assuming PMC405");
} else {
puts(str);
}
val = in32(GPIO0_IR);
if (!(val & CFG_REV1_2)) { /* low=rev1.2 */
puts(" rev1.2 (");
if (val & CFG_NONMONARCH) { /* monarch# signal */
puts("non-");
}
puts("monarch)");
} else {
puts(" <=rev1.1");
}
putc ('\n');
return 0;
}
/* ------------------------------------------------------------------------- */
void reset_phy(void)
{
#ifdef CONFIG_LXT971_NO_SLEEP
/*
* Disable sleep mode in LXT971
*/
lxt971_no_sleep();
#endif
}
int do_cantest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
ulong addr;
volatile uchar *ptr;
volatile uchar val;
int i;
addr = simple_strtol (argv[1], NULL, 16) + 0x16;
i = 0;
for (;;) {
ptr = (uchar *)addr;
for (i=0; i<8; i++) {
*ptr = i;
val = *ptr;
if (val != i) {
printf("ERROR: addr=%p write=0x%02X, read=0x%02X\n", ptr, i, val);
return 0;
}
/* Abort if ctrl-c was pressed */
if (ctrlc()) {
puts("\nAbort\n");
return 0;
}
ptr++;
}
}
return 0;
}
U_BOOT_CMD(
cantest, 3, 1, do_cantest,
"cantest - Test CAN controller",
NULL
);