u-boot/include/configs/usbarmory.h
Tom Rini 86cf1c8285 configs: Migrate CONFIG_NR_DRAM_BANKS
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
  CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
  2), set this to 8.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-16 16:45:02 -04:00

102 lines
2.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* USB armory MkI board configuration settings
* http://inversepath.com/usbarmory
*
* Copyright (C) 2015, Inverse Path
* Andrej Rosano <andrej@inversepath.com>
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_SYS_FSL_CLK
#include <asm/arch/imx-regs.h>
/* U-Boot environment */
#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
#define CONFIG_ENV_SIZE (8 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV 0
/* U-Boot general configurations */
#define CONFIG_SYS_CBSIZE 512
/* UART */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
/* SD/MMC */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_ESDHC_NUM 1
/* USB */
#define CONFIG_USB_EHCI_MX5
#define CONFIG_MXC_USB_PORT 1
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
/* Fuse */
#define CONFIG_FSL_IIM
/* U-Boot memory offsets */
#define CONFIG_LOADADDR 0x72000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/* Linux boot */
#define CONFIG_HOSTNAME "usbarmory"
#define CONFIG_BOOTCOMMAND \
"run distro_bootcmd; " \
"setenv bootargs console=${console} ${bootargs_default}; " \
"ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; " \
"ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; " \
"bootz ${kernel_addr_r} - ${fdt_addr_r}"
#define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0)
#include <config_distro_bootcmd.h>
#define MEM_LAYOUT_ENV_SETTINGS \
"kernel_addr_r=0x70800000\0" \
"fdt_addr_r=0x71000000\0" \
"scriptaddr=0x70800000\0" \
"pxefile_addr_r=0x70800000\0" \
"ramdisk_addr_r=0x73000000\0"
#define CONFIG_EXTRA_ENV_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
"bootargs_default=root=/dev/mmcblk0p1 rootwait rw\0" \
"fdtfile=imx53-usbarmory.dtb\0" \
"console=ttymxc0,115200\0" \
BOOTENV
#ifndef CONFIG_CMDLINE
#define USBARMORY_FIT_PATH "/boot/usbarmory.itb"
#define USBARMORY_FIT_ADDR "0x70800000"
#endif
/* Physical Memory Map */
#define PHYS_SDRAM CSD0_BASE_ADDR
#define PHYS_SDRAM_SIZE (gd->ram_size)
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#define CONFIG_SYS_MEMTEST_START 0x70000000
#define CONFIG_SYS_MEMTEST_END 0x90000000
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
#endif /* __CONFIG_H */