mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 23:24:38 +00:00
6e2b8344d6
Enable the use of SDMA mode to boost eMMC performance on ROCK Pi 4. Also add missing flags to indicate the supported MMC modes. Using mmc read command to read 32 MiB data shows following improvement: => time mmc read 10000000 2000 10000 Before: time: 3.178 seconds After: time: 0.402 seconds This also enables CONFIG_SPL_FIT_SIGNATURE option to help discover any possible future issue with loading TF-A into DRAM/SRAM. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
99 lines
2.6 KiB
Text
99 lines
2.6 KiB
Text
CONFIG_ARM=y
|
|
CONFIG_SKIP_LOWLEVEL_INIT=y
|
|
CONFIG_COUNTER_FREQUENCY=24000000
|
|
CONFIG_ARCH_ROCKCHIP=y
|
|
CONFIG_TEXT_BASE=0x00200000
|
|
CONFIG_NR_DRAM_BANKS=1
|
|
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
|
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
|
|
CONFIG_ENV_OFFSET=0x3F8000
|
|
CONFIG_DEFAULT_DEVICE_TREE="rk3399-rock-pi-4a"
|
|
CONFIG_OF_LIBFDT_OVERLAY=y
|
|
CONFIG_DM_RESET=y
|
|
CONFIG_ROCKCHIP_RK3399=y
|
|
CONFIG_TARGET_EVB_RK3399=y
|
|
CONFIG_SPL_STACK=0x400000
|
|
CONFIG_DEBUG_UART_BASE=0xFF1A0000
|
|
CONFIG_DEBUG_UART_CLOCK=24000000
|
|
CONFIG_SYS_LOAD_ADDR=0x800800
|
|
CONFIG_PCI=y
|
|
CONFIG_DEBUG_UART=y
|
|
# CONFIG_ANDROID_BOOT_IMAGE is not set
|
|
CONFIG_SPL_FIT_SIGNATURE=y
|
|
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock-pi-4a.dtb"
|
|
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
|
CONFIG_MISC_INIT_R=y
|
|
CONFIG_SPL_MAX_SIZE=0x2e000
|
|
CONFIG_SPL_PAD_TO=0x7f8000
|
|
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
|
|
CONFIG_SPL_BSS_START_ADDR=0x400000
|
|
CONFIG_SPL_BSS_MAX_SIZE=0x2000
|
|
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
|
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
|
|
CONFIG_SPL_STACK_R=y
|
|
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
|
|
CONFIG_TPL=y
|
|
CONFIG_CMD_BOOTZ=y
|
|
CONFIG_CMD_NVEDIT_EFI=y
|
|
CONFIG_CMD_DFU=y
|
|
CONFIG_CMD_GPT=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_PCI=y
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_ROCKUSB=y
|
|
CONFIG_CMD_USB_MASS_STORAGE=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_CMD_EFIDEBUG=y
|
|
CONFIG_CMD_TIME=y
|
|
CONFIG_SPL_OF_CONTROL=y
|
|
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
|
CONFIG_ENV_IS_IN_MMC=y
|
|
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|
CONFIG_DFU_MMC=y
|
|
CONFIG_ROCKCHIP_GPIO=y
|
|
CONFIG_SYS_I2C_ROCKCHIP=y
|
|
CONFIG_MISC=y
|
|
CONFIG_ROCKCHIP_EFUSE=y
|
|
CONFIG_MMC_DW=y
|
|
CONFIG_MMC_DW_ROCKCHIP=y
|
|
CONFIG_MMC_SDHCI=y
|
|
CONFIG_MMC_SDHCI_SDMA=y
|
|
CONFIG_MMC_SDHCI_ROCKCHIP=y
|
|
CONFIG_ETH_DESIGNWARE=y
|
|
CONFIG_GMAC_ROCKCHIP=y
|
|
CONFIG_NVME_PCI=y
|
|
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
|
|
CONFIG_PHY_ROCKCHIP_TYPEC=y
|
|
CONFIG_PMIC_RK8XX=y
|
|
CONFIG_REGULATOR_PWM=y
|
|
CONFIG_REGULATOR_RK8XX=y
|
|
CONFIG_PWM_ROCKCHIP=y
|
|
CONFIG_RAM_ROCKCHIP_LPDDR4=y
|
|
CONFIG_BAUDRATE=1500000
|
|
CONFIG_DEBUG_UART_SHIFT=2
|
|
CONFIG_SYS_NS16550_MEM32=y
|
|
CONFIG_SYSRESET=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_XHCI_HCD=y
|
|
CONFIG_USB_XHCI_DWC3=y
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_USB_EHCI_GENERIC=y
|
|
CONFIG_USB_DWC3=y
|
|
CONFIG_USB_DWC3_GENERIC=y
|
|
CONFIG_USB_KEYBOARD=y
|
|
CONFIG_USB_HOST_ETHER=y
|
|
CONFIG_USB_ETHER_ASIX=y
|
|
CONFIG_USB_ETHER_ASIX88179=y
|
|
CONFIG_USB_ETHER_MCS7830=y
|
|
CONFIG_USB_ETHER_RTL8152=y
|
|
CONFIG_USB_ETHER_SMSC95XX=y
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_USB_FUNCTION_ROCKUSB=y
|
|
CONFIG_VIDEO=y
|
|
CONFIG_DISPLAY=y
|
|
CONFIG_VIDEO_ROCKCHIP=y
|
|
CONFIG_DISPLAY_ROCKCHIP_HDMI=y
|
|
CONFIG_SPL_TINY_MEMSET=y
|
|
CONFIG_ERRNO_STR=y
|
|
CONFIG_EFI_CAPSULE_ON_DISK=y
|
|
CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
|