u-boot/arch/arm
Jonas Karlman 1bf49d5a4a rockchip: rk3566-radxa-cm3-io: Update defconfig
Update defconfig for rk3566-radxa-cm3-io with new defaults. Also add
missing supported mmc modes to sdhci node.

Remove the SPL_ROCKCHIP_BACK_TO_BROM=y option, SPL is expected to load
next stage from a FIT image and then jump to next stage not back to
BootRom.

Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to DRAM or SRAM.

Extend SPL_MAX_SIZE to 0x40000, SPL is loaded to 0x0 and TF-A is loaded
to 0x40000, use the space in between as SPL_MAX_SIZE.

Add config option to include useful gpio cmd.

Remove the CONFIG_NET_RANDOM_ETHADDR=y option, ethaddr and eth1addr is
set based on cpuid read from OTP.

Filter out assigned-clock props with CONFIG_OF_SPL_REMOVE_PROPS,
U-Boot proper will read and configure assigned-clock props.

Add CONFIG_SYS_NS16550_MEM32=y to use 32bit access of serial register.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-05-18 08:44:04 +08:00
..
cpu ARM: armv7: add non-SPL enable for Cortex SMPEN 2023-05-13 04:01:30 +02:00
dts rockchip: rk3566-radxa-cm3-io: Update defconfig 2023-05-18 08:44:04 +08:00
include reset: rockchip: implement rk3588 lookup table 2023-05-17 17:36:18 +08:00
lib arm64: interrupts: print FAR_ELx on sync exceptions 2023-04-25 15:31:27 -04:00
mach-apple
mach-aspeed
mach-at91
mach-bcm283x mmc: bcm2835-host: let firmware manage the clock divisor 2023-03-24 14:43:20 +00:00
mach-bcmbca
mach-bcmstb
mach-cortina
mach-davinci
mach-exynos Correct SPL use of EXYNOS7420 2023-02-09 16:32:26 -05:00
mach-highbank
mach-histb arm: histb: hi3798mv200: add initial support for Hi3798MV200 HC2910-2AGHD05 board 2023-05-03 09:05:24 -04:00
mach-hpe arm: Correct cpu_reset function prototype on some platforms 2023-03-22 15:22:48 -04:00
mach-imx dm: Emit the arch_cpu_init_dm() even only before relocation 2023-05-11 10:25:29 +08:00
mach-integrator
mach-ipq40xx
mach-k3 Kconfig: j721s2: Change K3_MCU_SCRATCHPAD_BASE to non firewalled region 2023-05-04 13:06:22 -04:00
mach-keystone
mach-kirkwood arm: kirkwood: Move internal registers in arch_very_early_init() function 2023-03-24 13:11:47 +01:00
mach-lpc32xx
mach-mediatek arm: Correct cpu_reset function prototype on some platforms 2023-03-22 15:22:48 -04:00
mach-meson
mach-mvebu drivers: fix debug string with fdt_addr_t input 2023-05-06 17:28:18 +08:00
mach-nexell
mach-npcm
mach-octeontx
mach-octeontx2
mach-omap2 dm: Emit the arch_cpu_init_dm() even only before relocation 2023-05-11 10:25:29 +08:00
mach-orion5x
mach-owl
mach-qemu
mach-rmobile ARM: rmobile: Add support for Renesas RZ/N1 SoC 2023-05-13 04:01:30 +02:00
mach-rockchip rockchip: handle peripheral as well as otg dr_mode 2023-05-09 22:50:01 +08:00
mach-s5pc1xx
mach-snapdragon clocks: qcs404: Add support for I2C clocks 2023-02-13 10:01:52 -05:00
mach-socfpga
mach-sti
mach-stm32
mach-stm32mp arm: stm32mp: spl: fix function with fdt_addr_t input 2023-05-06 17:28:18 +08:00
mach-sunxi sunxi: arm64: boot0.h: runtime check for RVBAR address 2023-04-12 00:17:22 +01:00
mach-tegra ARM: tegra20: implement BCT patching 2023-02-23 12:55:37 -07:00
mach-u8500
mach-uniphier
mach-versal xilinx: zynqmp: Add missing prototype for zynqmp_mmio_write 2023-03-09 13:15:00 +01:00
mach-versal-net xilinx: zynqmp: Add missing prototype for zynqmp_mmio_write 2023-03-09 13:15:00 +01:00
mach-versatile
mach-zynq
mach-zynqmp arm64: zynqmp: Fix issue of apps executing from R5 core 1 2023-05-15 09:33:57 +02:00
mach-zynqmp-r5
thumb1/include/asm/proc-armv
config.mk arm: Centralize fixed register logic 2023-04-25 15:31:27 -04:00
Kconfig arm: add support for Hisilicon HiSTB family SoCs 2023-05-03 09:05:24 -04:00
Kconfig.debug
Makefile arm: add support for Hisilicon HiSTB family SoCs 2023-05-03 09:05:24 -04:00