mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
568d3ba969
U-Boot now supports the M1 Ultra SoC as found in the new Mac Studio. Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
83 lines
2.2 KiB
ReStructuredText
83 lines
2.2 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
|
|
U-Boot for Apple Silicon Macs
|
|
=============================
|
|
|
|
Allows Apple Silicon Macs to boot U-Boot via the m1n1 bootloader
|
|
developed by the Asahi Linux project. At this point the machines with
|
|
the following SoCs work:
|
|
|
|
- Apple M1 SoC (t8103)
|
|
- Apple M1 Pro SoC (t6000)
|
|
- Apple M1 Max SoC (t6001)
|
|
- Apple M1 Ultra SoC (t6002)
|
|
|
|
On these SoCs the following hardware is supported:
|
|
|
|
- S5L serial port
|
|
- SPI keyboard (on laptops)
|
|
- Framebuffer
|
|
- NVMe storage
|
|
- USB 3.1 Type-C ports
|
|
|
|
Device trees are currently provided for the M1 Mac mini (2020, J274),
|
|
M1 MacBook Pro 13" (2020, J293), M1 MacBook Air (2020, J313) and M1
|
|
iMac (2021, J456/J457).
|
|
|
|
Building U-Boot
|
|
---------------
|
|
|
|
.. code-block:: bash
|
|
|
|
$ export CROSS_COMPILE=aarch64-none-elf-
|
|
$ make apple_m1_defconfig
|
|
$ make
|
|
|
|
This will build ``u-boot-nodtb.bin`` as well as devices trees for some
|
|
of the supported machines. These device trees can be found in the
|
|
``arch/arm/dts`` subdirectory of your build.
|
|
|
|
Image creation
|
|
--------------
|
|
|
|
In order to run U-Boot on an Apple Silicon Mac, U-Boot has to be used
|
|
as a payload for the m1n1 bootloader. Instructions for building m1n1
|
|
can be found here:
|
|
|
|
https://github.com/AsahiLinux/docs/wiki/SW%3Am1n1
|
|
|
|
.. code-block:: bash
|
|
|
|
$ cat m1n1.macho t8103-j274.dtb u-boot-nodtb.bin > u-boot.macho
|
|
|
|
This uses ``u-boot-nodtb.bin`` as the device tree is passed to U-Boot
|
|
by m1n1 after making some adjustments.
|
|
|
|
Image installation
|
|
------------------
|
|
|
|
Instructions on how to install U-Boot on your Mac can be found at:
|
|
|
|
https://github.com/AsahiLinux/docs/wiki/Developer-Quickstart
|
|
|
|
Just replace ``m1n1.macho`` with ``u-boot.macho`` in the instructions.
|
|
|
|
Debug UART
|
|
----------
|
|
|
|
Since the base address of the UART is SoC-dependent, the debug UART is
|
|
not enabled by default. To enable the debug UART the base address
|
|
needs to be adjusted and the CONFIG_DEBUG_UART option needs to be
|
|
enabled. The table below gives the correct base address for the
|
|
supported SoCs.
|
|
|
|
.. list-table::
|
|
:widths: 32 16
|
|
:header-rows: 1
|
|
|
|
* - SoC
|
|
- Base Address
|
|
* - M1 (t8103)
|
|
- 0x235200000
|
|
* - M1 Pro/Max/Ultra (t6000/t6001/t6002)
|
|
- 0x39b200000
|