mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 05:42:58 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
151 lines
4.6 KiB
C
151 lines
4.6 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Configuation settings for the WB45N CPU Module.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H__
|
|
#define __CONFIG_H__
|
|
|
|
#include <asm/hardware.h>
|
|
|
|
/* ARM asynchronous clock */
|
|
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
|
|
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
|
|
|
|
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
|
|
/* general purpose I/O */
|
|
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
|
|
#define CONFIG_AT91_GPIO
|
|
|
|
/* serial console */
|
|
#define CONFIG_ATMEL_USART
|
|
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
|
#define CONFIG_USART_ID ATMEL_ID_SYS
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
|
|
/* SDRAM */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define CONFIG_SYS_SDRAM_BASE 0x20000000
|
|
#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 MB */
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
|
|
|
|
/* NAND flash */
|
|
#define CONFIG_NAND_ATMEL
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
|
/* our ALE is AD21 */
|
|
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
|
|
/* our CLE is AD22 */
|
|
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
|
|
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4
|
|
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5
|
|
|
|
/* PMECC & PMERRLOC */
|
|
#define CONFIG_ATMEL_NAND_HWECC 1
|
|
#define CONFIG_ATMEL_NAND_HW_PMECC 1
|
|
#define CONFIG_PMECC_CAP 4
|
|
#define CONFIG_PMECC_SECTOR_SIZE 512
|
|
|
|
#define CONFIG_MTD_DEVICE
|
|
#define CONFIG_CMD_MTDPARTS
|
|
#define CONFIG_MTD_PARTITIONS
|
|
#define CONFIG_RBTREE
|
|
#define CONFIG_LZO
|
|
|
|
/* Ethernet */
|
|
#define CONFIG_MACB
|
|
#define CONFIG_RMII
|
|
#define CONFIG_NET_RETRY_COUNT 20
|
|
#define CONFIG_MACB_SEARCH_PHY
|
|
#define CONFIG_ETHADDR C0:EE:40:00:00:00
|
|
#define CONFIG_ENV_OVERWRITE 1
|
|
|
|
/* System */
|
|
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SYS_MEMTEST_END 0x23e00000
|
|
|
|
#ifdef CONFIG_SYS_USE_NANDFLASH
|
|
/* bootstrap + u-boot + env + linux in nandflash */
|
|
#define CONFIG_ENV_OFFSET 0xa0000
|
|
#define CONFIG_ENV_OFFSET_REDUND 0xc0000
|
|
#define CONFIG_ENV_SIZE 0x20000 /* 1 block = 128 kB */
|
|
|
|
#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xe0000 0x280000; " \
|
|
"run _mtd; bootm"
|
|
|
|
#define MTDIDS_DEFAULT "nand0=atmel_nand"
|
|
#define MTDPARTS_DEFAULT "mtdparts=atmel_nand:" \
|
|
"128K(at91bs)," \
|
|
"512K(u-boot)," \
|
|
"128K(u-boot-env)," \
|
|
"128K(redund-env)," \
|
|
"2560K(kernel-a)," \
|
|
"2560K(kernel-b)," \
|
|
"38912K(rootfs-a)," \
|
|
"38912K(rootfs-b)," \
|
|
"46208K(user)," \
|
|
"512K(logs)"
|
|
|
|
#else
|
|
#error No boot method selected, please select 'CONFIG_SYS_USE_NANDFLASH'
|
|
#endif
|
|
|
|
#define CONFIG_BOOTARGS "console=ttyS0,115200 earlyprintk " \
|
|
"rw noinitrd mem=64M " \
|
|
"rootfstype=ubifs root=ubi0:rootfs ubi.mtd=6"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"_mtd=mtdparts default; setenv bootargs ${bootargs} ${mtdparts}\0" \
|
|
"autoload=no\0" \
|
|
"autostart=no\0" \
|
|
"ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
|
|
"\0"
|
|
|
|
#define CONFIG_SYS_CBSIZE 256
|
|
#define CONFIG_SYS_MAXARGS 16
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN (512 * 1024 + 0x1000)
|
|
|
|
/* SPL */
|
|
#define CONFIG_SPL_TEXT_BASE 0x300000
|
|
#define CONFIG_SPL_MAX_SIZE 0x6000
|
|
#define CONFIG_SPL_STACK 0x308000
|
|
|
|
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
|
|
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
|
|
#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
|
|
|
|
#define CONFIG_SYS_MASTER_CLOCK 132096000
|
|
#define CONFIG_SYS_AT91_PLLA 0x20c73f03
|
|
#define CONFIG_SYS_MCKR 0x1301
|
|
#define CONFIG_SYS_MCKR_CSS 0x1302
|
|
|
|
#define CONFIG_SPL_NAND_DRIVERS
|
|
#define CONFIG_SPL_NAND_BASE
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 0x800
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT 64
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0
|
|
#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
|
|
|
|
#endif /* __CONFIG_H__ */
|