mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-26 14:40:41 +00:00
ac5cce38de
claim spi bus while doing memory copy, this will set up the spi controller device control register before doing a memory read. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Tested-by: Yebio Mesfin <ymesfin@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
415 lines
8.4 KiB
C
415 lines
8.4 KiB
C
/*
|
|
* SPI flash operations
|
|
*
|
|
* Copyright (C) 2008 Atmel Corporation
|
|
* Copyright (C) 2010 Reinhard Meyer, EMK Elektronik
|
|
* Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <spi.h>
|
|
#include <spi_flash.h>
|
|
#include <watchdog.h>
|
|
|
|
#include "sf_internal.h"
|
|
|
|
static void spi_flash_addr(u32 addr, u8 *cmd)
|
|
{
|
|
/* cmd[0] is actual command */
|
|
cmd[1] = addr >> 16;
|
|
cmd[2] = addr >> 8;
|
|
cmd[3] = addr >> 0;
|
|
}
|
|
|
|
int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr)
|
|
{
|
|
u8 cmd;
|
|
int ret;
|
|
|
|
cmd = CMD_WRITE_STATUS;
|
|
ret = spi_flash_write_common(flash, &cmd, 1, &sr, 1);
|
|
if (ret < 0) {
|
|
debug("SF: fail to write status register\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SPI_FLASH_BAR
|
|
static int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel)
|
|
{
|
|
u8 cmd;
|
|
int ret;
|
|
|
|
if (flash->bank_curr == bank_sel) {
|
|
debug("SF: not require to enable bank%d\n", bank_sel);
|
|
return 0;
|
|
}
|
|
|
|
cmd = flash->bank_write_cmd;
|
|
ret = spi_flash_write_common(flash, &cmd, 1, &bank_sel, 1);
|
|
if (ret < 0) {
|
|
debug("SF: fail to write bank register\n");
|
|
return ret;
|
|
}
|
|
flash->bank_curr = bank_sel;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int spi_flash_bank(struct spi_flash *flash, u32 offset)
|
|
{
|
|
u8 bank_sel;
|
|
int ret;
|
|
|
|
bank_sel = offset / SPI_FLASH_16MB_BOUN;
|
|
|
|
ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
|
|
if (ret) {
|
|
debug("SF: fail to set bank%d\n", bank_sel);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout)
|
|
{
|
|
struct spi_slave *spi = flash->spi;
|
|
unsigned long timebase;
|
|
int ret;
|
|
u8 status;
|
|
u8 check_status = 0x0;
|
|
u8 poll_bit = STATUS_WIP;
|
|
u8 cmd = flash->poll_cmd;
|
|
|
|
if (cmd == CMD_FLAG_STATUS) {
|
|
poll_bit = STATUS_PEC;
|
|
check_status = poll_bit;
|
|
}
|
|
|
|
ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN);
|
|
if (ret) {
|
|
debug("SF: fail to read %s status register\n",
|
|
cmd == CMD_READ_STATUS ? "read" : "flag");
|
|
return ret;
|
|
}
|
|
|
|
timebase = get_timer(0);
|
|
do {
|
|
WATCHDOG_RESET();
|
|
|
|
ret = spi_xfer(spi, 8, NULL, &status, 0);
|
|
if (ret)
|
|
return -1;
|
|
|
|
if ((status & poll_bit) == check_status)
|
|
break;
|
|
|
|
} while (get_timer(timebase) < timeout);
|
|
|
|
spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END);
|
|
|
|
if ((status & poll_bit) == check_status)
|
|
return 0;
|
|
|
|
/* Timed out */
|
|
debug("SF: time out!\n");
|
|
return -1;
|
|
}
|
|
|
|
int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
|
|
size_t cmd_len, const void *buf, size_t buf_len)
|
|
{
|
|
struct spi_slave *spi = flash->spi;
|
|
unsigned long timeout = SPI_FLASH_PROG_TIMEOUT;
|
|
int ret;
|
|
|
|
if (buf == NULL)
|
|
timeout = SPI_FLASH_PAGE_ERASE_TIMEOUT;
|
|
|
|
ret = spi_claim_bus(flash->spi);
|
|
if (ret) {
|
|
debug("SF: unable to claim SPI bus\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = spi_flash_cmd_write_enable(flash);
|
|
if (ret < 0) {
|
|
debug("SF: enabling write failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = spi_flash_cmd_write(spi, cmd, cmd_len, buf, buf_len);
|
|
if (ret < 0) {
|
|
debug("SF: write cmd failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = spi_flash_cmd_wait_ready(flash, timeout);
|
|
if (ret < 0) {
|
|
debug("SF: write %s timed out\n",
|
|
timeout == SPI_FLASH_PROG_TIMEOUT ?
|
|
"program" : "page erase");
|
|
return ret;
|
|
}
|
|
|
|
spi_release_bus(spi);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
|
|
{
|
|
u32 erase_size;
|
|
u8 cmd[4];
|
|
int ret = -1;
|
|
|
|
erase_size = flash->erase_size;
|
|
if (offset % erase_size || len % erase_size) {
|
|
debug("SF: Erase offset/length not multiple of erase size\n");
|
|
return -1;
|
|
}
|
|
|
|
cmd[0] = flash->erase_cmd;
|
|
while (len) {
|
|
#ifdef CONFIG_SPI_FLASH_BAR
|
|
ret = spi_flash_bank(flash, offset);
|
|
if (ret < 0)
|
|
return ret;
|
|
#endif
|
|
spi_flash_addr(offset, cmd);
|
|
|
|
debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
|
|
cmd[2], cmd[3], offset);
|
|
|
|
ret = spi_flash_write_common(flash, cmd, sizeof(cmd), NULL, 0);
|
|
if (ret < 0) {
|
|
debug("SF: erase failed\n");
|
|
break;
|
|
}
|
|
|
|
offset += erase_size;
|
|
len -= erase_size;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
|
|
size_t len, const void *buf)
|
|
{
|
|
unsigned long byte_addr, page_size;
|
|
size_t chunk_len, actual;
|
|
u8 cmd[4];
|
|
int ret = -1;
|
|
|
|
page_size = flash->page_size;
|
|
|
|
cmd[0] = CMD_PAGE_PROGRAM;
|
|
for (actual = 0; actual < len; actual += chunk_len) {
|
|
#ifdef CONFIG_SPI_FLASH_BAR
|
|
ret = spi_flash_bank(flash, offset);
|
|
if (ret < 0)
|
|
return ret;
|
|
#endif
|
|
byte_addr = offset % page_size;
|
|
chunk_len = min(len - actual, page_size - byte_addr);
|
|
|
|
if (flash->spi->max_write_size)
|
|
chunk_len = min(chunk_len, flash->spi->max_write_size);
|
|
|
|
spi_flash_addr(offset, cmd);
|
|
|
|
debug("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n",
|
|
buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
|
|
|
|
ret = spi_flash_write_common(flash, cmd, sizeof(cmd),
|
|
buf + actual, chunk_len);
|
|
if (ret < 0) {
|
|
debug("SF: write failed\n");
|
|
break;
|
|
}
|
|
|
|
offset += chunk_len;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
|
|
size_t cmd_len, void *data, size_t data_len)
|
|
{
|
|
struct spi_slave *spi = flash->spi;
|
|
int ret;
|
|
|
|
ret = spi_claim_bus(flash->spi);
|
|
if (ret) {
|
|
debug("SF: unable to claim SPI bus\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len);
|
|
if (ret < 0) {
|
|
debug("SF: read cmd failed\n");
|
|
return ret;
|
|
}
|
|
|
|
spi_release_bus(spi);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
|
|
size_t len, void *data)
|
|
{
|
|
u8 cmd[5], bank_sel = 0;
|
|
u32 remain_len, read_len;
|
|
int ret = -1;
|
|
|
|
/* Handle memory-mapped SPI */
|
|
if (flash->memory_map) {
|
|
ret = spi_claim_bus(flash->spi);
|
|
if (ret) {
|
|
debug("SF: unable to claim SPI bus\n");
|
|
return ret;
|
|
}
|
|
spi_xfer(flash->spi, 0, NULL, NULL, SPI_XFER_MMAP);
|
|
memcpy(data, flash->memory_map + offset, len);
|
|
spi_xfer(flash->spi, 0, NULL, NULL, SPI_XFER_MMAP_END);
|
|
spi_release_bus(flash->spi);
|
|
return 0;
|
|
}
|
|
|
|
cmd[0] = CMD_READ_ARRAY_FAST;
|
|
cmd[4] = 0x00;
|
|
|
|
while (len) {
|
|
#ifdef CONFIG_SPI_FLASH_BAR
|
|
bank_sel = offset / SPI_FLASH_16MB_BOUN;
|
|
|
|
ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
|
|
if (ret) {
|
|
debug("SF: fail to set bank%d\n", bank_sel);
|
|
return ret;
|
|
}
|
|
#endif
|
|
remain_len = (SPI_FLASH_16MB_BOUN * (bank_sel + 1)) - offset;
|
|
if (len < remain_len)
|
|
read_len = len;
|
|
else
|
|
read_len = remain_len;
|
|
|
|
spi_flash_addr(offset, cmd);
|
|
|
|
ret = spi_flash_read_common(flash, cmd, sizeof(cmd),
|
|
data, read_len);
|
|
if (ret < 0) {
|
|
debug("SF: read failed\n");
|
|
break;
|
|
}
|
|
|
|
offset += read_len;
|
|
len -= read_len;
|
|
data += read_len;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_SPI_FLASH_SST
|
|
static int sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf)
|
|
{
|
|
int ret;
|
|
u8 cmd[4] = {
|
|
CMD_SST_BP,
|
|
offset >> 16,
|
|
offset >> 8,
|
|
offset,
|
|
};
|
|
|
|
debug("BP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n",
|
|
spi_w8r8(flash->spi, CMD_READ_STATUS), buf, cmd[0], offset);
|
|
|
|
ret = spi_flash_cmd_write_enable(flash);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), buf, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
|
|
}
|
|
|
|
int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
|
|
const void *buf)
|
|
{
|
|
size_t actual, cmd_len;
|
|
int ret;
|
|
u8 cmd[4];
|
|
|
|
ret = spi_claim_bus(flash->spi);
|
|
if (ret) {
|
|
debug("SF: Unable to claim SPI bus\n");
|
|
return ret;
|
|
}
|
|
|
|
/* If the data is not word aligned, write out leading single byte */
|
|
actual = offset % 2;
|
|
if (actual) {
|
|
ret = sst_byte_write(flash, offset, buf);
|
|
if (ret)
|
|
goto done;
|
|
}
|
|
offset += actual;
|
|
|
|
ret = spi_flash_cmd_write_enable(flash);
|
|
if (ret)
|
|
goto done;
|
|
|
|
cmd_len = 4;
|
|
cmd[0] = CMD_SST_AAI_WP;
|
|
cmd[1] = offset >> 16;
|
|
cmd[2] = offset >> 8;
|
|
cmd[3] = offset;
|
|
|
|
for (; actual < len - 1; actual += 2) {
|
|
debug("WP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n",
|
|
spi_w8r8(flash->spi, CMD_READ_STATUS), buf + actual,
|
|
cmd[0], offset);
|
|
|
|
ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len,
|
|
buf + actual, 2);
|
|
if (ret) {
|
|
debug("SF: sst word program failed\n");
|
|
break;
|
|
}
|
|
|
|
ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
|
|
if (ret)
|
|
break;
|
|
|
|
cmd_len = 1;
|
|
offset += 2;
|
|
}
|
|
|
|
if (!ret)
|
|
ret = spi_flash_cmd_write_disable(flash);
|
|
|
|
/* If there is a single trailing byte, write it out */
|
|
if (!ret && actual != len)
|
|
ret = sst_byte_write(flash, offset, buf + actual);
|
|
|
|
done:
|
|
debug("SF: sst: program %s %zu bytes @ 0x%zx\n",
|
|
ret ? "failure" : "success", len, offset - actual);
|
|
|
|
spi_release_bus(flash->spi);
|
|
return ret;
|
|
}
|
|
#endif
|