mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-08 22:24:32 +00:00
4eabf1e54b
At present, for broadwell, SDRAM is always set up in U-Boot proper since the 64-bit mode (which uses SDRAM init in SPL) is not supported. Update the code to allow SDRAM init in SPL instead so that U-Boot proper can be loaded into SDRAM and run from there. This allows U-Boot to be compressed to reduce space, since it is not necessary to run it directly from flash. It could later allow us to support 64-bit U-Boot on broadwell. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
158 lines
4.7 KiB
C
158 lines
4.7 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2011 The Chromium Authors
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <asm/io.h>
|
|
#include <asm/mrc_common.h>
|
|
#include <asm/arch/iomap.h>
|
|
#include <asm/arch/pch.h>
|
|
#include <asm/arch/pei_data.h>
|
|
|
|
__weak asmlinkage void sdram_console_tx_byte(unsigned char byte)
|
|
{
|
|
#ifdef DEBUG
|
|
putc(byte);
|
|
#endif
|
|
}
|
|
|
|
void broadwell_fill_pei_data(struct pei_data *pei_data)
|
|
{
|
|
pei_data->pei_version = PEI_VERSION;
|
|
pei_data->board_type = BOARD_TYPE_ULT;
|
|
pei_data->pciexbar = MCFG_BASE_ADDRESS;
|
|
pei_data->smbusbar = SMBUS_BASE_ADDRESS;
|
|
pei_data->ehcibar = EARLY_EHCI_BAR;
|
|
pei_data->xhcibar = EARLY_XHCI_BAR;
|
|
pei_data->gttbar = EARLY_GTT_BAR;
|
|
pei_data->pmbase = ACPI_BASE_ADDRESS;
|
|
pei_data->gpiobase = GPIO_BASE_ADDRESS;
|
|
pei_data->tseg_size = CONFIG_SMM_TSEG_SIZE;
|
|
pei_data->temp_mmio_base = EARLY_TEMP_MMIO;
|
|
pei_data->tx_byte = sdram_console_tx_byte;
|
|
pei_data->ddr_refresh_2x = 1;
|
|
}
|
|
|
|
static void pei_data_usb2_port(struct pei_data *pei_data, int port, uint length,
|
|
uint enable, uint oc_pin, uint location)
|
|
{
|
|
pei_data->usb2_ports[port].length = length;
|
|
pei_data->usb2_ports[port].enable = enable;
|
|
pei_data->usb2_ports[port].oc_pin = oc_pin;
|
|
pei_data->usb2_ports[port].location = location;
|
|
}
|
|
|
|
static void pei_data_usb3_port(struct pei_data *pei_data, int port, uint enable,
|
|
uint oc_pin, uint fixed_eq)
|
|
{
|
|
pei_data->usb3_ports[port].enable = enable;
|
|
pei_data->usb3_ports[port].oc_pin = oc_pin;
|
|
pei_data->usb3_ports[port].fixed_eq = fixed_eq;
|
|
}
|
|
|
|
void mainboard_fill_pei_data(struct pei_data *pei_data)
|
|
{
|
|
/* DQ byte map for Samus board */
|
|
const u8 dq_map[2][6][2] = {
|
|
{ { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 },
|
|
{ 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } },
|
|
{ { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 },
|
|
{ 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } } };
|
|
/* DQS CPU<>DRAM map for Samus board */
|
|
const u8 dqs_map[2][8] = {
|
|
{ 2, 0, 1, 3, 6, 4, 7, 5 },
|
|
{ 2, 1, 0, 3, 6, 5, 4, 7 } };
|
|
|
|
pei_data->ec_present = 1;
|
|
|
|
/* One installed DIMM per channel */
|
|
pei_data->dimm_channel0_disabled = 2;
|
|
pei_data->dimm_channel1_disabled = 2;
|
|
|
|
memcpy(pei_data->dq_map, dq_map, sizeof(dq_map));
|
|
memcpy(pei_data->dqs_map, dqs_map, sizeof(dqs_map));
|
|
|
|
/* P0: HOST PORT */
|
|
pei_data_usb2_port(pei_data, 0, 0x0080, 1, 0,
|
|
USB_PORT_BACK_PANEL);
|
|
/* P1: HOST PORT */
|
|
pei_data_usb2_port(pei_data, 1, 0x0080, 1, 1,
|
|
USB_PORT_BACK_PANEL);
|
|
/* P2: RAIDEN */
|
|
pei_data_usb2_port(pei_data, 2, 0x0080, 1, USB_OC_PIN_SKIP,
|
|
USB_PORT_BACK_PANEL);
|
|
/* P3: SD CARD */
|
|
pei_data_usb2_port(pei_data, 3, 0x0040, 1, USB_OC_PIN_SKIP,
|
|
USB_PORT_INTERNAL);
|
|
/* P4: RAIDEN */
|
|
pei_data_usb2_port(pei_data, 4, 0x0080, 1, USB_OC_PIN_SKIP,
|
|
USB_PORT_BACK_PANEL);
|
|
/* P5: WWAN (Disabled) */
|
|
pei_data_usb2_port(pei_data, 5, 0x0000, 0, USB_OC_PIN_SKIP,
|
|
USB_PORT_SKIP);
|
|
/* P6: CAMERA */
|
|
pei_data_usb2_port(pei_data, 6, 0x0040, 1, USB_OC_PIN_SKIP,
|
|
USB_PORT_INTERNAL);
|
|
/* P7: BT */
|
|
pei_data_usb2_port(pei_data, 7, 0x0040, 1, USB_OC_PIN_SKIP,
|
|
USB_PORT_INTERNAL);
|
|
|
|
/* P1: HOST PORT */
|
|
pei_data_usb3_port(pei_data, 0, 1, 0, 0);
|
|
/* P2: HOST PORT */
|
|
pei_data_usb3_port(pei_data, 1, 1, 1, 0);
|
|
/* P3: RAIDEN */
|
|
pei_data_usb3_port(pei_data, 2, 1, USB_OC_PIN_SKIP, 0);
|
|
/* P4: RAIDEN */
|
|
pei_data_usb3_port(pei_data, 3, 1, USB_OC_PIN_SKIP, 0);
|
|
}
|
|
|
|
static int broadwell_northbridge_early_init(struct udevice *dev)
|
|
{
|
|
/* Move earlier? */
|
|
dm_pci_write_config32(dev, PCIEXBAR + 4, 0);
|
|
/* 64MiB - 0-63 buses */
|
|
dm_pci_write_config32(dev, PCIEXBAR, MCFG_BASE_ADDRESS | 4 | 1);
|
|
|
|
dm_pci_write_config32(dev, MCHBAR, MCH_BASE_ADDRESS | 1);
|
|
dm_pci_write_config32(dev, DMIBAR, DMI_BASE_ADDRESS | 1);
|
|
dm_pci_write_config32(dev, EPBAR, EP_BASE_ADDRESS | 1);
|
|
writel(EDRAM_BASE_ADDRESS | 1, MCH_BASE_ADDRESS + EDRAMBAR);
|
|
writel(GDXC_BASE_ADDRESS | 1, MCH_BASE_ADDRESS + GDXCBAR);
|
|
|
|
/* Set C0000-FFFFF to access RAM on both reads and writes */
|
|
dm_pci_write_config8(dev, PAM0, 0x30);
|
|
dm_pci_write_config8(dev, PAM1, 0x33);
|
|
dm_pci_write_config8(dev, PAM2, 0x33);
|
|
dm_pci_write_config8(dev, PAM3, 0x33);
|
|
dm_pci_write_config8(dev, PAM4, 0x33);
|
|
dm_pci_write_config8(dev, PAM5, 0x33);
|
|
dm_pci_write_config8(dev, PAM6, 0x33);
|
|
|
|
/* Device enable: IGD and Mini-HD */
|
|
dm_pci_write_config32(dev, DEVEN, DEVEN_D0EN | DEVEN_D2EN | DEVEN_D3EN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int broadwell_northbridge_probe(struct udevice *dev)
|
|
{
|
|
if (!(gd->flags & GD_FLG_RELOC))
|
|
return broadwell_northbridge_early_init(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id broadwell_northbridge_ids[] = {
|
|
{ .compatible = "intel,broadwell-northbridge" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(broadwell_northbridge_drv) = {
|
|
.name = "broadwell_northbridge",
|
|
.id = UCLASS_NORTHBRIDGE,
|
|
.of_match = broadwell_northbridge_ids,
|
|
.probe = broadwell_northbridge_probe,
|
|
};
|