Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-02 17:41:08 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/net/mcfmii.c
Tom Rini 6e7df1d151 global: Finish CONFIG -> CFG migration 
At this point, the remaining places where we have a symbol that is
defined as CONFIG_... are in fairly odd locations. While as much dead
code has been removed as possible, some of these locations are simply
less obvious at first. In other cases, this code is used, but was
defined in such a way as to have been missed by earlier checks.  Perform
a rename of all such remaining symbols to be CFG_... rather than
CONFIG_...

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-20 12:27:24 -05:00

298 lines
7 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*/
#include <common.h>
#include <config.h>
#include <net.h>
#include <netdev.h>
#include <asm/global_data.h>
#include <linux/delay.h>
#include <asm/fec.h>
#include <asm/immap.h>
#include <linux/mii.h>
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_CMD_NET)
#undef MII_DEBUG
#undef ET_DEBUG
/*extern int fecpin_setclear(struct eth_device *dev, int setclear);*/
#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
#include <miiphy.h>
/* Make MII read/write commands for the FEC. */
#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \
(REG & 0x1f) << 18))
#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \
(REG & 0x1f) << 18) | (VAL & 0xffff))
#ifndef CFG_SYS_UNSPEC_PHYID
# define CFG_SYS_UNSPEC_PHYID 0
#endif
#ifndef CFG_SYS_UNSPEC_STRID
# define CFG_SYS_UNSPEC_STRID 0
#endif
typedef struct phy_info_struct {
u32 phyid;
char *strid;
} phy_info_t;
phy_info_t phyinfo[] = {
{0x0022561B, "AMD79C784VC"}, /* AMD 79C784VC */
{0x00406322, "BCM5222"}, /* Broadcom 5222 */
{0x02a80150, "Intel82555"}, /* Intel 82555 */
{0x0016f870, "LSI80225"}, /* LSI 80225 */
{0x0016f880, "LSI80225/B"}, /* LSI 80225/B */
{0x78100000, "LXT970"}, /* LXT970 */
{0x001378e0, "LXT971"}, /* LXT971 and 972 */
{0x00221619, "KS8721BL"}, /* Micrel KS8721BL/SL */
{0x00221512, "KSZ8041NL"}, /* Micrel KSZ8041NL */
{0x20005CE1, "N83640"}, /* National 83640 */
{0x20005C90, "N83848"}, /* National 83848 */
{0x20005CA2, "N83849"}, /* National 83849 */
{0x01814400, "QS6612"}, /* QS6612 */
#if defined(CFG_SYS_UNSPEC_PHYID) && defined(CFG_SYS_UNSPEC_STRID)
{CFG_SYS_UNSPEC_PHYID, CFG_SYS_UNSPEC_STRID},
#endif
{0, 0}
};
/*
* mii_init -- Initialize the MII for MII command without ethernet
* This function is a subset of eth_init
*/
void mii_reset(fec_info_t *info)
{
volatile FEC_T *fecp = (FEC_T *) (info->miibase);
int i;
fecp->ecr = FEC_ECR_RESET;
for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
udelay(1);
}
if (i == FEC_RESET_DELAY)
printf("FEC_RESET_DELAY timeout\n");
}
/* send command to phy using mii, wait for result */
uint mii_send(uint mii_cmd)
{
struct udevice *dev;
fec_info_t *info;
volatile FEC_T *ep;
uint mii_reply;
int j = 0;
/* retrieve from register structure */
dev = eth_get_dev();
info = dev_get_priv(dev);
ep = (FEC_T *) info->miibase;
ep->mmfr = mii_cmd; /* command to phy */
/* wait for mii complete */
while (!(ep->eir & FEC_EIR_MII) && (j < info->to_loop)) {
udelay(1);
j++;
}
if (j >= info->to_loop) {
printf("MII not complete\n");
return -1;
}
mii_reply = ep->mmfr; /* result from phy */
ep->eir = FEC_EIR_MII; /* clear MII complete */
#ifdef ET_DEBUG
printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
__FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
#endif
return (mii_reply & 0xffff); /* data read from phy */
}
#endif /* CONFIG_SYS_DISCOVER_PHY || (CONFIG_MII) */
#if defined(CONFIG_SYS_DISCOVER_PHY)
int mii_discover_phy(fec_info_t *info)
{
#define MAX_PHY_PASSES 11
int phyaddr, pass;
uint phyno, phytype;
int i, found = 0;
if (info->phyname_init)
return info->phy_addr;
phyaddr = -1; /* didn't find a PHY yet */
for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
if (pass > 1) {
/* PHY may need more time to recover from reset.
* The LXT970 needs 50ms typical, no maximum is
* specified, so wait 10ms before try again.
* With 11 passes this gives it 100ms to wake up.
*/
udelay(10000); /* wait 10ms */
}
for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
phytype = mii_send(mk_mii_read(phyno, MII_PHYSID1));
#ifdef ET_DEBUG
printf("PHY type 0x%x pass %d\n", phytype, pass);
#endif
if (phytype == 0xffff)
continue;
phyaddr = phyno;
phytype <<= 16;
phytype |=
mii_send(mk_mii_read(phyno, MII_PHYSID2));
#ifdef ET_DEBUG
printf("PHY @ 0x%x pass %d\n", phyno, pass);
#endif
for (i = 0; (i < ARRAY_SIZE(phyinfo))
&& (phyinfo[i].phyid != 0); i++) {
if (phyinfo[i].phyid == phytype) {
#ifdef ET_DEBUG
printf("phyid %x - %s\n",
phyinfo[i].phyid,
phyinfo[i].strid);
#endif
strcpy(info->phy_name, phyinfo[i].strid);
info->phyname_init = 1;
found = 1;
break;
}
}
if (!found) {
#ifdef ET_DEBUG
printf("0x%08x\n", phytype);
#endif
strcpy(info->phy_name, "unknown");
info->phyname_init = 1;
break;
}
}
}
if (phyaddr < 0)
printf("No PHY device found.\n");
return phyaddr;
}
#endif /* CONFIG_SYS_DISCOVER_PHY */
__weak void mii_init(void)
{
struct udevice *dev;
fec_info_t *info;
volatile FEC_T *fecp;
int miispd = 0, i = 0;
u16 status = 0;
u16 linkgood = 0;
/* retrieve from register structure */
dev = eth_get_dev();
info = dev_get_priv(dev);
fecp = (FEC_T *) info->miibase;
fecpin_setclear(info, 1);
mii_reset(info);
/* We use strictly polling mode only */
fecp->eimr = 0;
/* Clear any pending interrupt */
fecp->eir = 0xffffffff;
/* Set MII speed */
miispd = (gd->bus_clk / 1000000) / 5;
fecp->mscr = miispd << 1;
#ifdef CONFIG_SYS_DISCOVER_PHY
info->phy_addr = mii_discover_phy(info);
#endif
if (info->phy_addr == -1)
return;
while (i < info->to_loop) {
status = 0;
i++;
/* Read PHY control register */
miiphy_read(dev->name, info->phy_addr, MII_BMCR, &status);
/* If phy set to autonegotiate, wait for autonegotiation done,
* if phy is not autonegotiating, just wait for link up.
*/
if ((status & BMCR_ANENABLE) == BMCR_ANENABLE) {
linkgood = (BMSR_ANEGCOMPLETE | BMSR_LSTATUS);
} else {
linkgood = BMSR_LSTATUS;
}
/* Read PHY status register */
miiphy_read(dev->name, info->phy_addr, MII_BMSR, &status);
if ((status & linkgood) == linkgood)
break;
udelay(1);
}
if (i >= info->to_loop)
printf("Link UP timeout\n");
/* adapt to the duplex and speed settings of the phy */
info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
}
/*
* Read and write a MII PHY register, routines used by MII Utilities
*
* FIXME: These routines are expected to return 0 on success, but mii_send
* does _not_ return an error code. Maybe 0xFFFF means error, i.e.
* no PHY connected...
* For now always return 0.
* FIXME: These routines only work after calling eth_init() at least once!
* Otherwise they hang in mii_send() !!! Sorry!
*/
int mcffec_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg)
{
short rdreg; /* register working value */
#ifdef MII_DEBUG
printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
#endif
rdreg = mii_send(mk_mii_read(addr, reg));
#ifdef MII_DEBUG
printf("0x%04x\n", rdreg);
#endif
return rdreg;
}
int mcffec_miiphy_write(struct mii_dev *bus, int addr, int devad, int reg,
u16 value)
{
#ifdef MII_DEBUG
printf("miiphy_write(0x%x) @ 0x%x = 0x%04x\n", reg, addr, value);
#endif
mii_send(mk_mii_write(addr, reg, value));
return 0;
}
#endif /* CONFIG_CMD_NET */
Reference in a new issue View git blame Copy permalink