mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 00:47:26 +00:00
a65f51b978
some soc(rk3036 etc) use dw_mmc but do not have internal dma, so we implement fifo mode to read and write data. Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
484 lines
11 KiB
C
484 lines
11 KiB
C
/*
|
|
* (C) Copyright 2012 SAMSUNG Electronics
|
|
* Jaehoon Chung <jh80.chung@samsung.com>
|
|
* Rajeshawari Shinde <rajeshwari.s@samsung.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <bouncebuf.h>
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <malloc.h>
|
|
#include <memalign.h>
|
|
#include <mmc.h>
|
|
#include <dwmmc.h>
|
|
#include <asm-generic/errno.h>
|
|
|
|
#define PAGE_SIZE 4096
|
|
|
|
static int dwmci_wait_reset(struct dwmci_host *host, u32 value)
|
|
{
|
|
unsigned long timeout = 1000;
|
|
u32 ctrl;
|
|
|
|
dwmci_writel(host, DWMCI_CTRL, value);
|
|
|
|
while (timeout--) {
|
|
ctrl = dwmci_readl(host, DWMCI_CTRL);
|
|
if (!(ctrl & DWMCI_RESET_ALL))
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void dwmci_set_idma_desc(struct dwmci_idmac *idmac,
|
|
u32 desc0, u32 desc1, u32 desc2)
|
|
{
|
|
struct dwmci_idmac *desc = idmac;
|
|
|
|
desc->flags = desc0;
|
|
desc->cnt = desc1;
|
|
desc->addr = desc2;
|
|
desc->next_addr = (ulong)desc + sizeof(struct dwmci_idmac);
|
|
}
|
|
|
|
static void dwmci_prepare_data(struct dwmci_host *host,
|
|
struct mmc_data *data,
|
|
struct dwmci_idmac *cur_idmac,
|
|
void *bounce_buffer)
|
|
{
|
|
unsigned long ctrl;
|
|
unsigned int i = 0, flags, cnt, blk_cnt;
|
|
ulong data_start, data_end;
|
|
|
|
|
|
blk_cnt = data->blocks;
|
|
|
|
dwmci_wait_reset(host, DWMCI_CTRL_FIFO_RESET);
|
|
|
|
data_start = (ulong)cur_idmac;
|
|
dwmci_writel(host, DWMCI_DBADDR, (ulong)cur_idmac);
|
|
|
|
do {
|
|
flags = DWMCI_IDMAC_OWN | DWMCI_IDMAC_CH ;
|
|
flags |= (i == 0) ? DWMCI_IDMAC_FS : 0;
|
|
if (blk_cnt <= 8) {
|
|
flags |= DWMCI_IDMAC_LD;
|
|
cnt = data->blocksize * blk_cnt;
|
|
} else
|
|
cnt = data->blocksize * 8;
|
|
|
|
dwmci_set_idma_desc(cur_idmac, flags, cnt,
|
|
(ulong)bounce_buffer + (i * PAGE_SIZE));
|
|
|
|
if (blk_cnt <= 8)
|
|
break;
|
|
blk_cnt -= 8;
|
|
cur_idmac++;
|
|
i++;
|
|
} while(1);
|
|
|
|
data_end = (ulong)cur_idmac;
|
|
flush_dcache_range(data_start, data_end + ARCH_DMA_MINALIGN);
|
|
|
|
ctrl = dwmci_readl(host, DWMCI_CTRL);
|
|
ctrl |= DWMCI_IDMAC_EN | DWMCI_DMA_EN;
|
|
dwmci_writel(host, DWMCI_CTRL, ctrl);
|
|
|
|
ctrl = dwmci_readl(host, DWMCI_BMOD);
|
|
ctrl |= DWMCI_BMOD_IDMAC_FB | DWMCI_BMOD_IDMAC_EN;
|
|
dwmci_writel(host, DWMCI_BMOD, ctrl);
|
|
|
|
dwmci_writel(host, DWMCI_BLKSIZ, data->blocksize);
|
|
dwmci_writel(host, DWMCI_BYTCNT, data->blocksize * data->blocks);
|
|
}
|
|
|
|
static int dwmci_data_transfer(struct dwmci_host *host, struct mmc_data *data)
|
|
{
|
|
int ret = 0;
|
|
u32 timeout = 240000;
|
|
u32 mask, size, i, len = 0;
|
|
u32 *buf = NULL;
|
|
ulong start = get_timer(0);
|
|
u32 fifo_depth = (((host->fifoth_val & RX_WMARK_MASK) >>
|
|
RX_WMARK_SHIFT) + 1) * 2;
|
|
|
|
size = data->blocksize * data->blocks / 4;
|
|
if (data->flags == MMC_DATA_READ)
|
|
buf = (unsigned int *)data->dest;
|
|
else
|
|
buf = (unsigned int *)data->src;
|
|
|
|
for (;;) {
|
|
mask = dwmci_readl(host, DWMCI_RINTSTS);
|
|
/* Error during data transfer. */
|
|
if (mask & (DWMCI_DATA_ERR | DWMCI_DATA_TOUT)) {
|
|
debug("%s: DATA ERROR!\n", __func__);
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
if (host->fifo_mode && size) {
|
|
if (data->flags == MMC_DATA_READ) {
|
|
if ((dwmci_readl(host, DWMCI_RINTSTS) &&
|
|
DWMCI_INTMSK_RXDR)) {
|
|
len = dwmci_readl(host, DWMCI_STATUS);
|
|
len = (len >> DWMCI_FIFO_SHIFT) &
|
|
DWMCI_FIFO_MASK;
|
|
for (i = 0; i < len; i++)
|
|
*buf++ =
|
|
dwmci_readl(host, DWMCI_DATA);
|
|
dwmci_writel(host, DWMCI_RINTSTS,
|
|
DWMCI_INTMSK_RXDR);
|
|
}
|
|
} else {
|
|
if ((dwmci_readl(host, DWMCI_RINTSTS) &&
|
|
DWMCI_INTMSK_TXDR)) {
|
|
len = dwmci_readl(host, DWMCI_STATUS);
|
|
len = fifo_depth - ((len >>
|
|
DWMCI_FIFO_SHIFT) &
|
|
DWMCI_FIFO_MASK);
|
|
for (i = 0; i < len; i++)
|
|
dwmci_writel(host, DWMCI_DATA,
|
|
*buf++);
|
|
dwmci_writel(host, DWMCI_RINTSTS,
|
|
DWMCI_INTMSK_TXDR);
|
|
}
|
|
}
|
|
size = size > len ? (size - len) : 0;
|
|
}
|
|
|
|
/* Data arrived correctly. */
|
|
if (mask & DWMCI_INTMSK_DTO) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
|
|
/* Check for timeout. */
|
|
if (get_timer(start) > timeout) {
|
|
debug("%s: Timeout waiting for data!\n",
|
|
__func__);
|
|
ret = TIMEOUT;
|
|
break;
|
|
}
|
|
}
|
|
|
|
dwmci_writel(host, DWMCI_RINTSTS, mask);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dwmci_set_transfer_mode(struct dwmci_host *host,
|
|
struct mmc_data *data)
|
|
{
|
|
unsigned long mode;
|
|
|
|
mode = DWMCI_CMD_DATA_EXP;
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
mode |= DWMCI_CMD_RW;
|
|
|
|
return mode;
|
|
}
|
|
|
|
static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
struct dwmci_host *host = mmc->priv;
|
|
ALLOC_CACHE_ALIGN_BUFFER(struct dwmci_idmac, cur_idmac,
|
|
data ? DIV_ROUND_UP(data->blocks, 8) : 0);
|
|
int ret = 0, flags = 0, i;
|
|
unsigned int timeout = 100000;
|
|
u32 retry = 10000;
|
|
u32 mask, ctrl;
|
|
ulong start = get_timer(0);
|
|
struct bounce_buffer bbstate;
|
|
|
|
while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) {
|
|
if (get_timer(start) > timeout) {
|
|
debug("%s: Timeout on data busy\n", __func__);
|
|
return TIMEOUT;
|
|
}
|
|
}
|
|
|
|
dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL);
|
|
|
|
if (data) {
|
|
if (host->fifo_mode) {
|
|
dwmci_writel(host, DWMCI_BLKSIZ, data->blocksize);
|
|
dwmci_writel(host, DWMCI_BYTCNT,
|
|
data->blocksize * data->blocks);
|
|
dwmci_wait_reset(host, DWMCI_CTRL_FIFO_RESET);
|
|
} else {
|
|
if (data->flags == MMC_DATA_READ) {
|
|
bounce_buffer_start(&bbstate, (void*)data->dest,
|
|
data->blocksize *
|
|
data->blocks, GEN_BB_WRITE);
|
|
} else {
|
|
bounce_buffer_start(&bbstate, (void*)data->src,
|
|
data->blocksize *
|
|
data->blocks, GEN_BB_READ);
|
|
}
|
|
dwmci_prepare_data(host, data, cur_idmac,
|
|
bbstate.bounce_buffer);
|
|
}
|
|
}
|
|
|
|
dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg);
|
|
|
|
if (data)
|
|
flags = dwmci_set_transfer_mode(host, data);
|
|
|
|
if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))
|
|
return -1;
|
|
|
|
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
|
|
flags |= DWMCI_CMD_ABORT_STOP;
|
|
else
|
|
flags |= DWMCI_CMD_PRV_DAT_WAIT;
|
|
|
|
if (cmd->resp_type & MMC_RSP_PRESENT) {
|
|
flags |= DWMCI_CMD_RESP_EXP;
|
|
if (cmd->resp_type & MMC_RSP_136)
|
|
flags |= DWMCI_CMD_RESP_LENGTH;
|
|
}
|
|
|
|
if (cmd->resp_type & MMC_RSP_CRC)
|
|
flags |= DWMCI_CMD_CHECK_CRC;
|
|
|
|
flags |= (cmd->cmdidx | DWMCI_CMD_START | DWMCI_CMD_USE_HOLD_REG);
|
|
|
|
debug("Sending CMD%d\n",cmd->cmdidx);
|
|
|
|
dwmci_writel(host, DWMCI_CMD, flags);
|
|
|
|
for (i = 0; i < retry; i++) {
|
|
mask = dwmci_readl(host, DWMCI_RINTSTS);
|
|
if (mask & DWMCI_INTMSK_CDONE) {
|
|
if (!data)
|
|
dwmci_writel(host, DWMCI_RINTSTS, mask);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i == retry) {
|
|
debug("%s: Timeout.\n", __func__);
|
|
return TIMEOUT;
|
|
}
|
|
|
|
if (mask & DWMCI_INTMSK_RTO) {
|
|
/*
|
|
* Timeout here is not necessarily fatal. (e)MMC cards
|
|
* will splat here when they receive CMD55 as they do
|
|
* not support this command and that is exactly the way
|
|
* to tell them apart from SD cards. Thus, this output
|
|
* below shall be debug(). eMMC cards also do not favor
|
|
* CMD8, please keep that in mind.
|
|
*/
|
|
debug("%s: Response Timeout.\n", __func__);
|
|
return TIMEOUT;
|
|
} else if (mask & DWMCI_INTMSK_RE) {
|
|
debug("%s: Response Error.\n", __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
|
|
if (cmd->resp_type & MMC_RSP_PRESENT) {
|
|
if (cmd->resp_type & MMC_RSP_136) {
|
|
cmd->response[0] = dwmci_readl(host, DWMCI_RESP3);
|
|
cmd->response[1] = dwmci_readl(host, DWMCI_RESP2);
|
|
cmd->response[2] = dwmci_readl(host, DWMCI_RESP1);
|
|
cmd->response[3] = dwmci_readl(host, DWMCI_RESP0);
|
|
} else {
|
|
cmd->response[0] = dwmci_readl(host, DWMCI_RESP0);
|
|
}
|
|
}
|
|
|
|
if (data) {
|
|
ret = dwmci_data_transfer(host, data);
|
|
|
|
/* only dma mode need it */
|
|
if (!host->fifo_mode) {
|
|
ctrl = dwmci_readl(host, DWMCI_CTRL);
|
|
ctrl &= ~(DWMCI_DMA_EN);
|
|
dwmci_writel(host, DWMCI_CTRL, ctrl);
|
|
bounce_buffer_stop(&bbstate);
|
|
}
|
|
}
|
|
|
|
udelay(100);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dwmci_setup_bus(struct dwmci_host *host, u32 freq)
|
|
{
|
|
u32 div, status;
|
|
int timeout = 10000;
|
|
unsigned long sclk;
|
|
|
|
if ((freq == host->clock) || (freq == 0))
|
|
return 0;
|
|
/*
|
|
* If host->get_mmc_clk isn't defined,
|
|
* then assume that host->bus_hz is source clock value.
|
|
* host->bus_hz should be set by user.
|
|
*/
|
|
if (host->get_mmc_clk)
|
|
sclk = host->get_mmc_clk(host, freq);
|
|
else if (host->bus_hz)
|
|
sclk = host->bus_hz;
|
|
else {
|
|
debug("%s: Didn't get source clock value.\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (sclk == freq)
|
|
div = 0; /* bypass mode */
|
|
else
|
|
div = DIV_ROUND_UP(sclk, 2 * freq);
|
|
|
|
dwmci_writel(host, DWMCI_CLKENA, 0);
|
|
dwmci_writel(host, DWMCI_CLKSRC, 0);
|
|
|
|
dwmci_writel(host, DWMCI_CLKDIV, div);
|
|
dwmci_writel(host, DWMCI_CMD, DWMCI_CMD_PRV_DAT_WAIT |
|
|
DWMCI_CMD_UPD_CLK | DWMCI_CMD_START);
|
|
|
|
do {
|
|
status = dwmci_readl(host, DWMCI_CMD);
|
|
if (timeout-- < 0) {
|
|
debug("%s: Timeout!\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
} while (status & DWMCI_CMD_START);
|
|
|
|
dwmci_writel(host, DWMCI_CLKENA, DWMCI_CLKEN_ENABLE |
|
|
DWMCI_CLKEN_LOW_PWR);
|
|
|
|
dwmci_writel(host, DWMCI_CMD, DWMCI_CMD_PRV_DAT_WAIT |
|
|
DWMCI_CMD_UPD_CLK | DWMCI_CMD_START);
|
|
|
|
timeout = 10000;
|
|
do {
|
|
status = dwmci_readl(host, DWMCI_CMD);
|
|
if (timeout-- < 0) {
|
|
debug("%s: Timeout!\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
} while (status & DWMCI_CMD_START);
|
|
|
|
host->clock = freq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dwmci_set_ios(struct mmc *mmc)
|
|
{
|
|
struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
|
|
u32 ctype, regs;
|
|
|
|
debug("Buswidth = %d, clock: %d\n", mmc->bus_width, mmc->clock);
|
|
|
|
dwmci_setup_bus(host, mmc->clock);
|
|
switch (mmc->bus_width) {
|
|
case 8:
|
|
ctype = DWMCI_CTYPE_8BIT;
|
|
break;
|
|
case 4:
|
|
ctype = DWMCI_CTYPE_4BIT;
|
|
break;
|
|
default:
|
|
ctype = DWMCI_CTYPE_1BIT;
|
|
break;
|
|
}
|
|
|
|
dwmci_writel(host, DWMCI_CTYPE, ctype);
|
|
|
|
regs = dwmci_readl(host, DWMCI_UHS_REG);
|
|
if (mmc->ddr_mode)
|
|
regs |= DWMCI_DDR_MODE;
|
|
else
|
|
regs &= ~DWMCI_DDR_MODE;
|
|
|
|
dwmci_writel(host, DWMCI_UHS_REG, regs);
|
|
|
|
if (host->clksel)
|
|
host->clksel(host);
|
|
}
|
|
|
|
static int dwmci_init(struct mmc *mmc)
|
|
{
|
|
struct dwmci_host *host = mmc->priv;
|
|
|
|
if (host->board_init)
|
|
host->board_init(host);
|
|
|
|
dwmci_writel(host, DWMCI_PWREN, 1);
|
|
|
|
if (!dwmci_wait_reset(host, DWMCI_RESET_ALL)) {
|
|
debug("%s[%d] Fail-reset!!\n", __func__, __LINE__);
|
|
return -EIO;
|
|
}
|
|
|
|
/* Enumerate at 400KHz */
|
|
dwmci_setup_bus(host, mmc->cfg->f_min);
|
|
|
|
dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF);
|
|
dwmci_writel(host, DWMCI_INTMASK, 0);
|
|
|
|
dwmci_writel(host, DWMCI_TMOUT, 0xFFFFFFFF);
|
|
|
|
dwmci_writel(host, DWMCI_IDINTEN, 0);
|
|
dwmci_writel(host, DWMCI_BMOD, 1);
|
|
|
|
if (!host->fifoth_val) {
|
|
uint32_t fifo_size;
|
|
|
|
fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
|
|
fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
|
|
host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) |
|
|
TX_WMARK(fifo_size / 2);
|
|
}
|
|
dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val);
|
|
|
|
dwmci_writel(host, DWMCI_CLKENA, 0);
|
|
dwmci_writel(host, DWMCI_CLKSRC, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct mmc_ops dwmci_ops = {
|
|
.send_cmd = dwmci_send_cmd,
|
|
.set_ios = dwmci_set_ios,
|
|
.init = dwmci_init,
|
|
};
|
|
|
|
int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk)
|
|
{
|
|
host->cfg.name = host->name;
|
|
host->cfg.ops = &dwmci_ops;
|
|
host->cfg.f_min = min_clk;
|
|
host->cfg.f_max = max_clk;
|
|
|
|
host->cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
|
|
|
|
host->cfg.host_caps = host->caps;
|
|
|
|
if (host->buswidth == 8) {
|
|
host->cfg.host_caps |= MMC_MODE_8BIT;
|
|
host->cfg.host_caps &= ~MMC_MODE_4BIT;
|
|
} else {
|
|
host->cfg.host_caps |= MMC_MODE_4BIT;
|
|
host->cfg.host_caps &= ~MMC_MODE_8BIT;
|
|
}
|
|
host->cfg.host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz;
|
|
|
|
host->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
|
|
|
|
host->mmc = mmc_create(&host->cfg, host);
|
|
if (host->mmc == NULL)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|