u-boot/drivers/axi/ihs_axi.c
Simon Glass f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00

294 lines
8.5 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2016
* Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
*
* (C) Copyright 2017, 2018
* Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
*/
#include <common.h>
#include <axi.h>
#include <dm.h>
#include <log.h>
#include <regmap.h>
/**
* struct ihs_axi_regs - Structure for the register map of a IHS AXI device
* @interrupt_status: Status register to indicate certain events (e.g.
* error during transfer, transfer complete, etc.)
* @interrupt_enable_control: Register to both control which statuses will be
* indicated in the interrupt_status register, and
* to change bus settings
* @address_lsb: Least significant 16-bit word of the address of a
* device to transfer data from/to
* @address_msb: Most significant 16-bit word of the address of a
* device to transfer data from/to
* @write_data_lsb: Least significant 16-bit word of the data to be
* written to a device
* @write_data_msb: Most significant 16-bit word of the data to be
* written to a device
* @read_data_lsb: Least significant 16-bit word of the data read
* from a device
* @read_data_msb: Most significant 16-bit word of the data read
* from a device
*/
struct ihs_axi_regs {
u16 interrupt_status;
u16 interrupt_enable_control;
u16 address_lsb;
u16 address_msb;
u16 write_data_lsb;
u16 write_data_msb;
u16 read_data_lsb;
u16 read_data_msb;
};
/**
* ihs_axi_set() - Convenience macro to set values in register map
* @map: The register map to write to
* @member: The member of the ihs_axi_regs structure to write
* @val: The value to write to the register map
*/
#define ihs_axi_set(map, member, val) \
regmap_set(map, struct ihs_axi_regs, member, val)
/**
* ihs_axi_get() - Convenience macro to read values from register map
* @map: The register map to read from
* @member: The member of the ihs_axi_regs structure to read
* @valp: Pointer to a buffer to receive the value read
*/
#define ihs_axi_get(map, member, valp) \
regmap_get(map, struct ihs_axi_regs, member, valp)
/**
* struct ihs_axi_priv - Private data structure of IHS AXI devices
* @map: Register map for the IHS AXI device
*/
struct ihs_axi_priv {
struct regmap *map;
};
/**
* enum status_reg - Description of bits in the interrupt_status register
* @STATUS_READ_COMPLETE_EVENT: A read transfer was completed
* @STATUS_WRITE_COMPLETE_EVENT: A write transfer was completed
* @STATUS_TIMEOUT_EVENT: A timeout has occurred during the transfer
* @STATUS_ERROR_EVENT: A error has occurred during the transfer
* @STATUS_AXI_INT: A AXI interrupt has occurred
* @STATUS_READ_DATA_AVAILABLE: Data is available to be read
* @STATUS_BUSY: The bus is busy
* @STATUS_INIT_DONE: The bus has finished initializing
*/
enum status_reg {
STATUS_READ_COMPLETE_EVENT = BIT(15),
STATUS_WRITE_COMPLETE_EVENT = BIT(14),
STATUS_TIMEOUT_EVENT = BIT(13),
STATUS_ERROR_EVENT = BIT(12),
STATUS_AXI_INT = BIT(11),
STATUS_READ_DATA_AVAILABLE = BIT(7),
STATUS_BUSY = BIT(6),
STATUS_INIT_DONE = BIT(5),
};
/**
* enum control_reg - Description of bit fields in the interrupt_enable_control
* register
* @CONTROL_READ_COMPLETE_EVENT_ENABLE: STATUS_READ_COMPLETE_EVENT will be
* raised in the interrupt_status register
* @CONTROL_WRITE_COMPLETE_EVENT_ENABLE: STATUS_WRITE_COMPLETE_EVENT will be
* raised in the interrupt_status register
* @CONTROL_TIMEOUT_EVENT_ENABLE: STATUS_TIMEOUT_EVENT will be raised in
* the interrupt_status register
* @CONTROL_ERROR_EVENT_ENABLE: STATUS_ERROR_EVENT will be raised in
* the interrupt_status register
* @CONTROL_AXI_INT_ENABLE: STATUS_AXI_INT will be raised in the
* interrupt_status register
* @CONTROL_CMD_NOP: Configure bus to send a NOP command
* for the next transfer
* @CONTROL_CMD_WRITE: Configure bus to do a write transfer
* @CONTROL_CMD_WRITE_POST_INC: Auto-increment address after write
* transfer
* @CONTROL_CMD_READ: Configure bus to do a read transfer
* @CONTROL_CMD_READ_POST_INC: Auto-increment address after read
* transfer
*/
enum control_reg {
CONTROL_READ_COMPLETE_EVENT_ENABLE = BIT(15),
CONTROL_WRITE_COMPLETE_EVENT_ENABLE = BIT(14),
CONTROL_TIMEOUT_EVENT_ENABLE = BIT(13),
CONTROL_ERROR_EVENT_ENABLE = BIT(12),
CONTROL_AXI_INT_ENABLE = BIT(11),
CONTROL_CMD_NOP = 0x0,
CONTROL_CMD_WRITE = 0x8,
CONTROL_CMD_WRITE_POST_INC = 0x9,
CONTROL_CMD_READ = 0xa,
CONTROL_CMD_READ_POST_INC = 0xb,
};
/**
* enum axi_cmd - Determine if transfer is read or write transfer
* @AXI_CMD_READ: The transfer should be a read transfer
* @AXI_CMD_WRITE: The transfer should be a write transfer
*/
enum axi_cmd {
AXI_CMD_READ,
AXI_CMD_WRITE,
};
/**
* ihs_axi_transfer() - Run transfer on the AXI bus
* @bus: The AXI bus device on which to run the transfer on
* @address: The address to use in the transfer (i.e. which address to
* read/write from/to)
* @cmd: Should the transfer be a read or write transfer?
*
* Return: 0 if OK, -ve on error
*/
static int ihs_axi_transfer(struct udevice *bus, ulong address,
enum axi_cmd cmd)
{
struct ihs_axi_priv *priv = dev_get_priv(bus);
/* Try waiting for events up to 10 times */
const uint WAIT_TRIES = 10;
u16 wait_mask = STATUS_TIMEOUT_EVENT |
STATUS_ERROR_EVENT;
u16 complete_flag;
u16 status;
uint k;
if (cmd == AXI_CMD_READ) {
complete_flag = STATUS_READ_COMPLETE_EVENT;
cmd = CONTROL_CMD_READ;
} else {
complete_flag = STATUS_WRITE_COMPLETE_EVENT;
cmd = CONTROL_CMD_WRITE;
}
wait_mask |= complete_flag;
/* Lower 16 bit */
ihs_axi_set(priv->map, address_lsb, address & 0xffff);
/* Upper 16 bit */
ihs_axi_set(priv->map, address_msb, (address >> 16) & 0xffff);
ihs_axi_set(priv->map, interrupt_status, wait_mask);
ihs_axi_set(priv->map, interrupt_enable_control, cmd);
for (k = WAIT_TRIES; k > 0; --k) {
ihs_axi_get(priv->map, interrupt_status, &status);
if (status & wait_mask)
break;
udelay(1);
}
/*
* k == 0 -> Tries ran out with no event we were waiting for actually
* occurring.
*/
if (!k)
ihs_axi_get(priv->map, interrupt_status, &status);
if (status & complete_flag)
return 0;
if (status & STATUS_ERROR_EVENT) {
debug("%s: Error occurred during transfer\n", bus->name);
return -EIO;
}
debug("%s: Transfer timed out\n", bus->name);
return -ETIMEDOUT;
}
/*
* API
*/
static int ihs_axi_read(struct udevice *dev, ulong address, void *data,
enum axi_size_t size)
{
struct ihs_axi_priv *priv = dev_get_priv(dev);
int ret;
u16 data_lsb, data_msb;
u32 *p = data;
if (size != AXI_SIZE_32) {
debug("%s: transfer size '%d' not supported\n",
dev->name, size);
return -ENOSYS;
}
ret = ihs_axi_transfer(dev, address, AXI_CMD_READ);
if (ret < 0) {
debug("%s: Error during AXI transfer (err = %d)\n",
dev->name, ret);
return ret;
}
ihs_axi_get(priv->map, read_data_lsb, &data_lsb);
ihs_axi_get(priv->map, read_data_msb, &data_msb);
/* Assemble data from two 16-bit words */
*p = (data_msb << 16) | data_lsb;
return 0;
}
static int ihs_axi_write(struct udevice *dev, ulong address, void *data,
enum axi_size_t size)
{
struct ihs_axi_priv *priv = dev_get_priv(dev);
int ret;
u32 *p = data;
if (size != AXI_SIZE_32) {
debug("%s: transfer size '%d' not supported\n",
dev->name, size);
return -ENOSYS;
}
/* Lower 16 bit */
ihs_axi_set(priv->map, write_data_lsb, *p & 0xffff);
/* Upper 16 bit */
ihs_axi_set(priv->map, write_data_msb, (*p >> 16) & 0xffff);
ret = ihs_axi_transfer(dev, address, AXI_CMD_WRITE);
if (ret < 0) {
debug("%s: Error during AXI transfer (err = %d)\n",
dev->name, ret);
return ret;
}
return 0;
}
static const struct udevice_id ihs_axi_ids[] = {
{ .compatible = "gdsys,ihs_axi" },
{ /* sentinel */ }
};
static const struct axi_ops ihs_axi_ops = {
.read = ihs_axi_read,
.write = ihs_axi_write,
};
static int ihs_axi_probe(struct udevice *dev)
{
struct ihs_axi_priv *priv = dev_get_priv(dev);
regmap_init_mem(dev_ofnode(dev), &priv->map);
return 0;
}
U_BOOT_DRIVER(ihs_axi_bus) = {
.name = "ihs_axi_bus",
.id = UCLASS_AXI,
.of_match = ihs_axi_ids,
.ops = &ihs_axi_ops,
.priv_auto_alloc_size = sizeof(struct ihs_axi_priv),
.probe = ihs_axi_probe,
};