mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 13:56:30 +00:00
75238f2367
The board supports following features: - Boot media support: SD card/e.MMC/SPI flash, - Support LCD display (optional, disabled by default), - Support ethernet, - Support USB mass storage. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> [fix checkpatch warnings] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
283 lines
7.7 KiB
C
283 lines
7.7 KiB
C
/*
|
|
* Copyright (C) 2015 Atmel Corporation
|
|
* Wenyou.Yang <wenyou.yang@atmel.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <atmel_hlcdc.h>
|
|
#include <lcd.h>
|
|
#include <mmc.h>
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
#include <spi.h>
|
|
#include <version.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/at91_common.h>
|
|
#include <asm/arch/at91_pmc.h>
|
|
#include <asm/arch/atmel_pio4.h>
|
|
#include <asm/arch/atmel_usba_udc.h>
|
|
#include <asm/arch/atmel_sdhci.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/sama5d2.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
{
|
|
return bus == 0 && cs == 0;
|
|
}
|
|
|
|
void spi_cs_activate(struct spi_slave *slave)
|
|
{
|
|
atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 0);
|
|
}
|
|
|
|
void spi_cs_deactivate(struct spi_slave *slave)
|
|
{
|
|
atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 1);
|
|
}
|
|
|
|
static void board_spi0_hw_init(void)
|
|
{
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 14, 0);
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 15, 0);
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 16, 0);
|
|
|
|
atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 1);
|
|
|
|
at91_periph_clk_enable(ATMEL_ID_SPI0);
|
|
}
|
|
|
|
static void board_usb_hw_init(void)
|
|
{
|
|
atmel_pio4_set_pio_output(AT91_PIO_PORTB, 10, 1);
|
|
}
|
|
|
|
#ifdef CONFIG_LCD
|
|
vidinfo_t panel_info = {
|
|
.vl_col = 480,
|
|
.vl_row = 272,
|
|
.vl_clk = 9000000,
|
|
.vl_bpix = LCD_BPP,
|
|
.vl_tft = 1,
|
|
.vl_hsync_len = 41,
|
|
.vl_left_margin = 2,
|
|
.vl_right_margin = 2,
|
|
.vl_vsync_len = 11,
|
|
.vl_upper_margin = 2,
|
|
.vl_lower_margin = 2,
|
|
.mmio = ATMEL_BASE_LCDC,
|
|
};
|
|
|
|
/* No power up/down pin for the LCD pannel */
|
|
void lcd_enable(void) { /* Empty! */ }
|
|
void lcd_disable(void) { /* Empty! */ }
|
|
|
|
unsigned int has_lcdc(void)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
static void board_lcd_hw_init(void)
|
|
{
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDPWM */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDISP */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDVSYNC */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 31, 0); /* LCDHSYNC */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTD, 0, 0); /* LCDPCK */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTD, 1, 0); /* LCDDEN */
|
|
|
|
/* LCDDAT0 */
|
|
/* LCDDAT1 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDDAT2 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDDAT3 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDDAT4 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDDAT5 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDDAT6 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDDAT7 */
|
|
|
|
/* LCDDAT8 */
|
|
/* LCDDAT9 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDDAT10 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDDAT11 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDDAT12 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDDAT13 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDDAT14 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDDAT15 */
|
|
|
|
/* LCDD16 */
|
|
/* LCDD17 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDDAT18 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDDAT19 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDAT20 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 25, 0); /* LCDDAT21 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDDAT22 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDDAT23 */
|
|
|
|
at91_periph_clk_enable(ATMEL_ID_LCDC);
|
|
}
|
|
|
|
#ifdef CONFIG_LCD_INFO
|
|
void lcd_show_board_info(void)
|
|
{
|
|
ulong dram_size;
|
|
int i;
|
|
char temp[32];
|
|
|
|
lcd_printf("%s\n", U_BOOT_VERSION);
|
|
lcd_printf("2015 ATMEL Corp\n");
|
|
lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
|
|
strmhz(temp, get_cpu_clk_rate()));
|
|
|
|
dram_size = 0;
|
|
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
|
|
dram_size += gd->bd->bi_dram[i].size;
|
|
|
|
lcd_printf("%ld MB SDRAM\n", dram_size >> 20);
|
|
}
|
|
#endif /* CONFIG_LCD_INFO */
|
|
#endif /* CONFIG_LCD */
|
|
|
|
static void board_gmac_hw_init(void)
|
|
{
|
|
atmel_pio4_set_f_periph(AT91_PIO_PORTB, 14, 0); /* GTXCK */
|
|
atmel_pio4_set_f_periph(AT91_PIO_PORTB, 15, 0); /* GTXEN */
|
|
atmel_pio4_set_f_periph(AT91_PIO_PORTB, 16, 0); /* GRXDV */
|
|
atmel_pio4_set_f_periph(AT91_PIO_PORTB, 17, 0); /* GRXER */
|
|
atmel_pio4_set_f_periph(AT91_PIO_PORTB, 18, 0); /* GRX0 */
|
|
atmel_pio4_set_f_periph(AT91_PIO_PORTB, 19, 0); /* GRX1 */
|
|
atmel_pio4_set_f_periph(AT91_PIO_PORTB, 20, 0); /* GTX0 */
|
|
atmel_pio4_set_f_periph(AT91_PIO_PORTB, 21, 0); /* GTX1 */
|
|
atmel_pio4_set_f_periph(AT91_PIO_PORTB, 22, 0); /* GMDC */
|
|
atmel_pio4_set_f_periph(AT91_PIO_PORTB, 23, 0); /* GMDIO */
|
|
|
|
at91_periph_clk_enable(ATMEL_ID_GMAC);
|
|
}
|
|
|
|
static void board_sdhci0_hw_init(void)
|
|
{
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 0, 0); /* SDMMC0_CK */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 1, 0); /* SDMMC0_CMD */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 2, 0); /* SDMMC0_DAT0 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 3, 0); /* SDMMC0_DAT1 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 4, 0); /* SDMMC0_DAT2 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 5, 0); /* SDMMC0_DAT3 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 6, 0); /* SDMMC0_DAT4 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 7, 0); /* SDMMC0_DAT5 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 8, 0); /* SDMMC0_DAT6 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 9, 0); /* SDMMC0_DAT7 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 10, 0); /* SDMMC0_RSTN */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SDMMC0_VDDSEL */
|
|
|
|
at91_periph_clk_enable(ATMEL_ID_SDMMC0);
|
|
at91_enable_periph_generated_clk(ATMEL_ID_SDMMC0,
|
|
GCK_CSS_PLLA_CLK, 1);
|
|
}
|
|
|
|
static void board_sdhci1_hw_init(void)
|
|
{
|
|
atmel_pio4_set_e_periph(AT91_PIO_PORTA, 18, 0); /* SDMMC1_DAT0 */
|
|
atmel_pio4_set_e_periph(AT91_PIO_PORTA, 19, 0); /* SDMMC1_DAT1 */
|
|
atmel_pio4_set_e_periph(AT91_PIO_PORTA, 20, 0); /* SDMMC1_DAT2 */
|
|
atmel_pio4_set_e_periph(AT91_PIO_PORTA, 21, 0); /* SDMMC1_DAT3 */
|
|
atmel_pio4_set_e_periph(AT91_PIO_PORTA, 22, 0); /* SDMMC1_CK */
|
|
atmel_pio4_set_e_periph(AT91_PIO_PORTA, 27, 0); /* SDMMC1_RSTN */
|
|
atmel_pio4_set_e_periph(AT91_PIO_PORTA, 28, 0); /* SDMMC1_CMD */
|
|
atmel_pio4_set_e_periph(AT91_PIO_PORTA, 30, 0); /* SDMMC1_CD */
|
|
|
|
at91_periph_clk_enable(ATMEL_ID_SDMMC1);
|
|
at91_enable_periph_generated_clk(ATMEL_ID_SDMMC1,
|
|
GCK_CSS_PLLA_CLK, 1);
|
|
}
|
|
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
#ifdef CONFIG_ATMEL_SDHCI0
|
|
atmel_sdhci_init((void *)ATMEL_BASE_SDMMC0, ATMEL_ID_SDMMC0);
|
|
#endif
|
|
#ifdef CONFIG_ATMEL_SDHCI1
|
|
atmel_sdhci_init((void *)ATMEL_BASE_SDMMC1, ATMEL_ID_SDMMC1);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void board_uart1_hw_init(void)
|
|
{
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTD, 2, 1); /* URXD1 */
|
|
atmel_pio4_set_a_periph(AT91_PIO_PORTD, 3, 0); /* UTXD1 */
|
|
|
|
at91_periph_clk_enable(ATMEL_ID_UART1);
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
at91_periph_clk_enable(ATMEL_ID_PIOA);
|
|
at91_periph_clk_enable(ATMEL_ID_PIOB);
|
|
at91_periph_clk_enable(ATMEL_ID_PIOC);
|
|
at91_periph_clk_enable(ATMEL_ID_PIOD);
|
|
|
|
board_uart1_hw_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
|
|
|
#ifdef CONFIG_ATMEL_SPI
|
|
board_spi0_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_ATMEL_SDHCI
|
|
#ifdef CONFIG_ATMEL_SDHCI0
|
|
board_sdhci0_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_ATMEL_SDHCI1
|
|
board_sdhci1_hw_init();
|
|
#endif
|
|
#endif
|
|
#ifdef CONFIG_MACB
|
|
board_gmac_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_LCD
|
|
board_lcd_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_CMD_USB
|
|
board_usb_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_USB_GADGET_ATMEL_USBA
|
|
at91_udp_hw_init();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
|
|
CONFIG_SYS_SDRAM_SIZE);
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int rc = 0;
|
|
|
|
#ifdef CONFIG_MACB
|
|
rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC, 0x00);
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_GADGET_ATMEL_USBA
|
|
usba_udc_probe(&pdata);
|
|
#ifdef CONFIG_USB_ETH_RNDIS
|
|
usb_eth_initialize(bis);
|
|
#endif
|
|
#endif
|
|
|
|
return rc;
|
|
}
|