mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
4adb16b29a
Marvell Armada 3700 Functional Specifications, section 52.2 PCIe Link Initialization says that TXDCLK_2X_SEL bit needs to be enabled for PCIe Root Complex mode. Same change was included in TF-A project: https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/9408 Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
264 lines
7.2 KiB
C
264 lines
7.2 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2015-2016 Marvell International Ltd.
|
|
*/
|
|
|
|
#ifndef _COMPHY_A3700_H_
|
|
#define _COMPHY_A3700_H_
|
|
|
|
#include "comphy_core.h"
|
|
|
|
#define MVEBU_REG(offs) \
|
|
((void __iomem *)(ulong)MVEBU_REGISTER(offs))
|
|
|
|
#define DEFAULT_REFCLK_MHZ 25
|
|
#define PLL_SET_DELAY_US 600
|
|
#define PLL_LOCK_TIMEOUT 1000
|
|
#define POLL_16B_REG 1
|
|
#define POLL_32B_REG 0
|
|
|
|
/*
|
|
* COMPHY SB definitions
|
|
*/
|
|
#define COMPHY_SEL_ADDR MVEBU_REG(0x0183FC)
|
|
|
|
#define COMPHY_PHY_CFG1_ADDR(lane) MVEBU_REG(0x018300 + (1 - lane) * 0x28)
|
|
#define rb_pin_pu_iveref BIT(1)
|
|
#define rb_pin_reset_core BIT(11)
|
|
#define rb_pin_reset_comphy BIT(12)
|
|
#define rb_pin_pu_pll BIT(16)
|
|
#define rb_pin_pu_rx BIT(17)
|
|
#define rb_pin_pu_tx BIT(18)
|
|
#define rb_pin_tx_idle BIT(19)
|
|
#define rf_gen_rx_sel_shift 22
|
|
#define rf_gen_rx_select (0x0F << rf_gen_rx_sel_shift)
|
|
#define rf_gen_tx_sel_shift 26
|
|
#define rf_gen_tx_select (0x0F << rf_gen_tx_sel_shift)
|
|
#define rb_phy_rx_init BIT(30)
|
|
|
|
#define COMPHY_PHY_STAT1_ADDR(lane) MVEBU_REG(0x018318 + (1 - lane) * 0x28)
|
|
#define rb_rx_init_done BIT(0)
|
|
#define rb_pll_ready_rx BIT(2)
|
|
#define rb_pll_ready_tx BIT(3)
|
|
|
|
/*
|
|
* PCIe/USB/SGMII definitions
|
|
*/
|
|
#define PCIE_BASE MVEBU_REG(0x070000)
|
|
#define PCIETOP_BASE MVEBU_REG(0x080000)
|
|
#define PCIE_RAMBASE MVEBU_REG(0x08C000)
|
|
#define PCIEPHY_BASE MVEBU_REG(0x01F000)
|
|
#define PCIEPHY_SHFT 2
|
|
|
|
#define USB32_BASE MVEBU_REG(0x050000) /* usb3 device */
|
|
#define USB32H_BASE MVEBU_REG(0x058000) /* usb3 host */
|
|
#define USB3PHY_BASE MVEBU_REG(0x05C000)
|
|
#define USB2PHY_BASE MVEBU_REG(0x05D000)
|
|
#define USB2PHY2_BASE MVEBU_REG(0x05F000)
|
|
#define USB32_CTRL_BASE MVEBU_REG(0x05D800)
|
|
#define USB3PHY_SHFT 2
|
|
#define USB3PHY_LANE2_REG_BASE_OFFSET 0x200
|
|
|
|
static inline void __iomem *sgmiiphy_addr(u32 lane, u32 addr)
|
|
{
|
|
addr = (addr & 0x00007FF) * 2;
|
|
if (lane == 1)
|
|
return PCIEPHY_BASE + addr;
|
|
else
|
|
return USB3PHY_BASE + addr;
|
|
}
|
|
|
|
/* units */
|
|
enum phy_unit {
|
|
PCIE = 1,
|
|
USB3 = 2,
|
|
};
|
|
|
|
static inline void __iomem *phy_addr(enum phy_unit unit, u32 addr)
|
|
{
|
|
if (unit == PCIE)
|
|
return PCIEPHY_BASE + addr * PCIEPHY_SHFT;
|
|
else
|
|
return USB3PHY_BASE + addr * USB3PHY_SHFT;
|
|
}
|
|
|
|
/* bit definition for USB32_CTRL_BASE (USB32 Control Mode) */
|
|
#define usb32_ctrl_id_mode BIT(0)
|
|
#define usb32_ctrl_soft_id BIT(1)
|
|
#define usb32_ctrl_int_mode BIT(4)
|
|
|
|
#define PWR_PLL_CTRL 0x01
|
|
#define rf_phy_mode_shift 5
|
|
#define rf_phy_mode_mask (0x7 << rf_phy_mode_shift)
|
|
#define rf_ref_freq_sel_shift 0
|
|
#define rf_ref_freq_sel_mask (0x1F << rf_ref_freq_sel_shift)
|
|
#define PHY_MODE_SGMII 0x4
|
|
|
|
#define KVCO_CAL_CTRL 0x02
|
|
#define rb_use_max_pll_rate BIT(12)
|
|
#define rb_force_calibration_done BIT(9)
|
|
|
|
#define DIG_LB_EN 0x23
|
|
#define rf_data_width_shift 10
|
|
#define rf_data_width_mask (0x3 << rf_data_width_shift)
|
|
|
|
#define SYNC_PATTERN 0x24
|
|
#define phy_txd_inv BIT(10)
|
|
#define phy_rxd_inv BIT(11)
|
|
|
|
#define SYNC_MASK_GEN 0x25
|
|
#define rb_idle_sync_en BIT(12)
|
|
|
|
#define UNIT_CTRL 0x48
|
|
|
|
#define GEN2_SETTINGS_2 0x3e
|
|
#define g2_tx_ssc_amp BIT(14)
|
|
|
|
#define GEN2_SETTINGS_3 0x3f
|
|
|
|
#define GEN3_SETTINGS_3 0x112
|
|
|
|
#define MISC_REG0 0x4f
|
|
#define rb_clk100m_125m_en BIT(4)
|
|
#define rb_txdclk_2x_sel BIT(6)
|
|
#define rb_clk500m_en BIT(7)
|
|
#define rb_ref_clk_sel BIT(10)
|
|
|
|
#define UNIT_IFACE_REF_CLK_CTRL 0x51
|
|
#define rb_ref1m_gen_div_force BIT(8)
|
|
#define rf_ref1m_gen_div_value_shift 0
|
|
#define rf_ref1m_gen_div_value_mask (0xFF << rf_ref1m_gen_div_value_shift)
|
|
|
|
#define UNIT_ERR_CNT_CONST_CTRL 0x6a
|
|
#define rb_fast_dfe_enable BIT(13)
|
|
|
|
#define MISC_REG1 0x73
|
|
#define bf_sel_bits_pcie_force BIT(15)
|
|
|
|
#define LANE_CFG0 0x180
|
|
#define bf_use_max_pll_rate BIT(9)
|
|
|
|
#define LANE_CFG1 0x181
|
|
#define bf_use_max_pll_rate BIT(9)
|
|
#define prd_txdeemph1_mask BIT(15)
|
|
#define tx_det_rx_mode BIT(6)
|
|
#define gen2_tx_data_dly_deft (2 << 3)
|
|
#define gen2_tx_data_dly_mask (BIT(3) | BIT(4))
|
|
#define tx_elec_idle_mode_en BIT(0)
|
|
|
|
#define LANE_CFG4 0x188
|
|
#define bf_spread_spectrum_clock_en BIT(7)
|
|
|
|
#define LANE_STAT1 0x183
|
|
#define rb_txdclk_pclk_en BIT(0)
|
|
|
|
#define GLOB_PHY_CTRL0 0x1c1
|
|
#define bf_soft_rst BIT(0)
|
|
#define bf_mode_refdiv 0x30
|
|
#define rb_mode_core_clk_freq_sel BIT(9)
|
|
#define rb_mode_pipe_width_32 BIT(3)
|
|
|
|
#define TEST_MODE_CTRL 0x1c2
|
|
#define rb_mode_margin_override BIT(2)
|
|
|
|
#define GLOB_CLK_SRC_LO 0x1c3
|
|
#define bf_cfg_sel_20b BIT(15)
|
|
|
|
#define PWR_MGM_TIM1 0x1d0
|
|
|
|
#define PCIE_REF_CLK_ADDR (PCIE_BASE + 0x4814)
|
|
|
|
#define USB3_CTRPUL_VAL_REG (0x20 + USB32_BASE)
|
|
#define USB3H_CTRPUL_VAL_REG (0x3454 + USB32H_BASE)
|
|
#define rb_usb3_ctr_100ns 0xff000000
|
|
|
|
#define USB2_OTG_PHY_CTRL_ADDR (0x820 + USB2PHY_BASE)
|
|
#define rb_usb2phy_suspm BIT(14)
|
|
#define rb_usb2phy_pu BIT(0)
|
|
|
|
#define USB2_PHY_OTG_CTRL_ADDR (0x34 + USB2PHY_BASE)
|
|
#define rb_pu_otg BIT(4)
|
|
|
|
#define USB2_PHY_CHRGR_DET_ADDR (0x38 + USB2PHY_BASE)
|
|
#define rb_cdp_en BIT(2)
|
|
#define rb_dcp_en BIT(3)
|
|
#define rb_pd_en BIT(4)
|
|
#define rb_pu_chrg_dtc BIT(5)
|
|
#define rb_cdp_dm_auto BIT(7)
|
|
#define rb_enswitch_dp BIT(12)
|
|
#define rb_enswitch_dm BIT(13)
|
|
|
|
#define USB2_CAL_CTRL_ADDR (0x8 + USB2PHY_BASE)
|
|
#define rb_usb2phy_pllcal_done BIT(31)
|
|
#define rb_usb2phy_impcal_done BIT(23)
|
|
|
|
#define USB2_PLL_CTRL0_ADDR (0x0 + USB2PHY_BASE)
|
|
#define rb_usb2phy_pll_ready BIT(31)
|
|
|
|
#define USB2_RX_CHAN_CTRL1_ADDR (0x18 + USB2PHY_BASE)
|
|
#define rb_usb2phy_sqcal_done BIT(31)
|
|
|
|
#define USB2_PHY2_CTRL_ADDR (0x804 + USB2PHY2_BASE)
|
|
#define rb_usb2phy2_suspm BIT(7)
|
|
#define rb_usb2phy2_pu BIT(0)
|
|
#define USB2_PHY2_CAL_CTRL_ADDR (0x8 + USB2PHY2_BASE)
|
|
#define USB2_PHY2_PLL_CTRL0_ADDR (0x0 + USB2PHY2_BASE)
|
|
#define USB2_PHY2_RX_CHAN_CTRL1_ADDR (0x18 + USB2PHY2_BASE)
|
|
|
|
#define USB2_PHY_BASE(usb32) (usb32 == 0 ? USB2PHY2_BASE : USB2PHY_BASE)
|
|
#define USB2_PHY_CTRL_ADDR(usb32) \
|
|
(usb32 == 0 ? USB2_PHY2_CTRL_ADDR : USB2_OTG_PHY_CTRL_ADDR)
|
|
#define RB_USB2PHY_SUSPM(usb32) \
|
|
(usb32 == 0 ? rb_usb2phy2_suspm : rb_usb2phy_suspm)
|
|
#define RB_USB2PHY_PU(usb32) \
|
|
(usb32 == 0 ? rb_usb2phy2_pu : rb_usb2phy_pu)
|
|
#define USB2_PHY_CAL_CTRL_ADDR(usb32) \
|
|
(usb32 == 0 ? USB2_PHY2_CAL_CTRL_ADDR : USB2_CAL_CTRL_ADDR)
|
|
#define USB2_PHY_RX_CHAN_CTRL1_ADDR(usb32) \
|
|
(usb32 == 0 ? USB2_PHY2_RX_CHAN_CTRL1_ADDR : USB2_RX_CHAN_CTRL1_ADDR)
|
|
#define USB2_PHY_PLL_CTRL0_ADDR(usb32) \
|
|
(usb32 == 0 ? USB2_PHY2_PLL_CTRL0_ADDR : USB2_PLL_CTRL0_ADDR)
|
|
|
|
/*
|
|
* SATA definitions
|
|
*/
|
|
#define AHCI_BASE MVEBU_REG(0xE0000)
|
|
|
|
#define rh_vsreg_addr (AHCI_BASE + 0x178)
|
|
#define rh_vsreg_data (AHCI_BASE + 0x17C)
|
|
#define rh_vs0_a (AHCI_BASE + 0xA0)
|
|
#define rh_vs0_d (AHCI_BASE + 0xA4)
|
|
|
|
#define vphy_sync_pattern_reg 0x224
|
|
#define bs_txd_inv BIT(10)
|
|
#define bs_rxd_inv BIT(11)
|
|
|
|
#define vphy_loopback_reg0 0x223
|
|
#define bs_phyintf_40bit 0x0C00
|
|
#define bs_pll_ready_tx 0x10
|
|
|
|
#define vphy_power_reg0 0x201
|
|
|
|
#define vphy_calctl_reg 0x202
|
|
#define bs_max_pll_rate BIT(12)
|
|
|
|
#define vphy_reserve_reg 0x0e
|
|
#define bs_phyctrl_frm_pin BIT(13)
|
|
|
|
#define vsata_ctrl_reg 0x00
|
|
#define bs_phy_pu_pll BIT(6)
|
|
|
|
/*
|
|
* SDIO/eMMC definitions
|
|
*/
|
|
#define SDIO_BASE MVEBU_REG(0xD8000)
|
|
|
|
#define SDIO_HOST_CTRL1_ADDR (SDIO_BASE + 0x28)
|
|
#define SDIO_SDHC_FIFO_ADDR (SDIO_BASE + 0x12C)
|
|
#define SDIO_CAP_12_ADDR (SDIO_BASE + 0x40)
|
|
#define SDIO_ENDIAN_ADDR (SDIO_BASE + 0x1A4)
|
|
#define SDIO_PHY_TIMING_ADDR (SDIO_BASE + 0x170)
|
|
#define SDIO_PHY_PAD_CTRL0_ADDR (SDIO_BASE + 0x178)
|
|
#define SDIO_DLL_RST_ADDR (SDIO_BASE + 0x148)
|
|
|
|
#endif /* _COMPHY_A3700_H_ */
|