u-boot/arch/arm/include/asm/arch-lpc32xx/config.h
Vladimir Zapolskiy 554b0e0d82 lpc32xx: add common USB OHCI defines for all LPC32xx boards
The change adds a number of macro definitions used by USB OHCI driver,
if CONFIG_USB_OHCI_LPC32XX is selected from a board config file.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Tested-by: Sylvain Lemieux <slemieux@tycoint.com>
2015-08-18 13:45:58 -04:00

102 lines
2.9 KiB
C

/*
* Common definitions for LPC32XX board configurations
*
* Copyright (C) 2011-2015 Vladimir Zapolskiy <vz@mleia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _LPC32XX_CONFIG_H
#define _LPC32XX_CONFIG_H
#define CONFIG_SYS_GENERIC_BOARD
/* Basic CPU architecture */
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_NR_DRAM_BANKS_MAX 2
/* UART configuration */
#if (CONFIG_SYS_LPC32XX_UART >= 3) && (CONFIG_SYS_LPC32XX_UART <= 6)
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_CONS_INDEX (CONFIG_SYS_LPC32XX_UART - 2)
#elif (CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2) || \
(CONFIG_SYS_LPC32XX_UART == 7)
#define CONFIG_LPC32XX_HSUART
#else
#error "define CONFIG_SYS_LPC32XX_UART in the range from 1 to 7"
#endif
#if defined(CONFIG_SYS_NS16550_SERIAL)
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
#define CONFIG_SYS_NS16550_COM1 UART3_BASE
#define CONFIG_SYS_NS16550_COM2 UART4_BASE
#define CONFIG_SYS_NS16550_COM3 UART5_BASE
#define CONFIG_SYS_NS16550_COM4 UART6_BASE
#endif
#if defined(CONFIG_LPC32XX_HSUART)
#if CONFIG_SYS_LPC32XX_UART == 1
#define HS_UART_BASE HS_UART1_BASE
#elif CONFIG_SYS_LPC32XX_UART == 2
#define HS_UART_BASE HS_UART2_BASE
#else /* CONFIG_SYS_LPC32XX_UART == 7 */
#define HS_UART_BASE HS_UART7_BASE
#endif
#endif
#define CONFIG_SYS_BAUDRATE_TABLE \
{ 9600, 19200, 38400, 57600, 115200, 230400, 460800 }
/* Ethernet */
#define LPC32XX_ETH_BASE ETHERNET_BASE
/* NAND */
#if defined(CONFIG_NAND_LPC32XX_SLC)
#define NAND_LARGE_BLOCK_PAGE_SIZE 0x800
#define NAND_SMALL_BLOCK_PAGE_SIZE 0x200
#if !defined(CONFIG_SYS_NAND_PAGE_SIZE)
#define CONFIG_SYS_NAND_PAGE_SIZE NAND_LARGE_BLOCK_PAGE_SIZE
#endif
#if (CONFIG_SYS_NAND_PAGE_SIZE == NAND_LARGE_BLOCK_PAGE_SIZE)
#define CONFIG_SYS_NAND_OOBSIZE 64
#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \
48, 49, 50, 51, 52, 53, 54, 55, \
56, 57, 58, 59, 60, 61, 62, 63, }
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
#elif (CONFIG_SYS_NAND_PAGE_SIZE == NAND_SMALL_BLOCK_PAGE_SIZE)
#define CONFIG_SYS_NAND_OOBSIZE 16
#define CONFIG_SYS_NAND_ECCPOS { 10, 11, 12, 13, 14, 15, }
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
#else
#error "CONFIG_SYS_NAND_PAGE_SIZE set to an invalid value"
#endif
#define CONFIG_SYS_NAND_ECCSIZE 0x100
#define CONFIG_SYS_NAND_ECCBYTES 3
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
CONFIG_SYS_NAND_PAGE_SIZE)
#endif /* CONFIG_NAND_LPC32XX_SLC */
/* NOR Flash */
#if defined(CONFIG_SYS_FLASH_CFI)
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_PROTECTION
#endif
/* USB OHCI */
#if defined(CONFIG_USB_OHCI_LPC32XX)
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
#define CONFIG_SYS_USB_OHCI_REGS_BASE USB_BASE
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "lpc32xx-ohci"
#endif
#endif /* _LPC32XX_CONFIG_H */