u-boot/include/configs/npi_imx6ull.h
Tom Rini 1a77da4b33 Convert CONFIG_SYS_HZ to Kconfig
This converts the following to Kconfig:
	CONFIG_SYS_HZ

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05 11:23:29 -04:00

90 lines
2.2 KiB
C

/* SPDX-License-Identifier: GPL-2.0+
*
* Copyright (c) 2021 Linumiz
* Author: Navin Sankar Velliangiri <navin@linumiz.com>
*/
#ifndef _NPI_IMX6ULL_H
#define _NPI_IMX6ULL_H
#include <linux/sizes.h>
#include "mx6_common.h"
/* SPL options */
#include "imx6_spl.h"
#define CONFIG_SYS_FSL_USDHC_NUM 1
/* Console configs */
#define CONFIG_MXC_UART_BASE UART1_BASE
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
#define CONFIG_NETMASK 255.255.255.0
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* environment settings */
#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV 0
#elif defined(CONFIG_ENV_IS_IN_NAND)
#undef CONFIG_ENV_SIZE
#define CONFIG_ENV_SECT_SIZE (128 << 10)
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
#endif
/* NAND */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
/* USB Configs */
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#ifdef CONFIG_CMD_NET
#define IMX_FEC_BASE ENET_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR 0x1
#define CONFIG_FEC_XCV_TYPE RMII
#define CONFIG_ETHPRIME "eth0"
#endif
#define CONFIG_IMX_THERMAL
#define CONFIG_FEC_ENET_DEV 1
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=ttymxc0,115200n8\0" \
"image=zImage\0" \
"fdtfile=imx6ull-seeed-npi-dev-board.dtb\0" \
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"fdt_addr_r=0x82000000\0" \
"kernel_addr_r=0x81000000\0" \
"pxefile_addr_r=0x87100000\0" \
"ramdisk_addr_r=0x82100000\0" \
"scriptaddr=0x87000000\0" \
"root=/dev/mmcblk0p2 rootwait\0" \
BOOTENV
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(UBIFS, ubifs, 0) \
func(PXE, pxe, na) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
#endif /* _NPI_IMX6ULL_H */