mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-18 09:13:06 +00:00
a3efa53c01
With limited low level configuration done via psu-init only IPs connected on SOM are initialized and configured. All IPs connected to carrier card are not initialized. There is a need to do proper reset, pin configuration and also clock setting. The patch targets the last part which is setting up proper clock for USBs and SDs. Also setup proper bus width for SD cards. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Link: https://lore.kernel.org/r/d9f80b2551bd246c3d7ecb09b516806c8dc83ed9.1645629459.git.michal.simek@xilinx.com
296 lines
5.7 KiB
Text
296 lines
5.7 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Clock specification for Xilinx ZynqMP
|
|
*
|
|
* (C) Copyright 2017 - 2021, Xilinx, Inc.
|
|
*
|
|
* Michal Simek <michal.simek@xilinx.com>
|
|
*/
|
|
|
|
#include <dt-bindings/clock/xlnx-zynqmp-clk.h>
|
|
/ {
|
|
fclk0: fclk0 {
|
|
status = "okay";
|
|
compatible = "xlnx,fclk";
|
|
clocks = <&zynqmp_clk PL0_REF>;
|
|
};
|
|
|
|
fclk1: fclk1 {
|
|
status = "okay";
|
|
compatible = "xlnx,fclk";
|
|
clocks = <&zynqmp_clk PL1_REF>;
|
|
};
|
|
|
|
fclk2: fclk2 {
|
|
status = "okay";
|
|
compatible = "xlnx,fclk";
|
|
clocks = <&zynqmp_clk PL2_REF>;
|
|
};
|
|
|
|
fclk3: fclk3 {
|
|
status = "okay";
|
|
compatible = "xlnx,fclk";
|
|
clocks = <&zynqmp_clk PL3_REF>;
|
|
};
|
|
|
|
pss_ref_clk: pss_ref_clk {
|
|
u-boot,dm-pre-reloc;
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <33333333>;
|
|
};
|
|
|
|
video_clk: video_clk {
|
|
u-boot,dm-pre-reloc;
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <27000000>;
|
|
};
|
|
|
|
pss_alt_ref_clk: pss_alt_ref_clk {
|
|
u-boot,dm-pre-reloc;
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
gt_crx_ref_clk: gt_crx_ref_clk {
|
|
u-boot,dm-pre-reloc;
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <108000000>;
|
|
};
|
|
|
|
aux_ref_clk: aux_ref_clk {
|
|
u-boot,dm-pre-reloc;
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <27000000>;
|
|
};
|
|
};
|
|
|
|
&zynqmp_firmware {
|
|
zynqmp_clk: clock-controller {
|
|
u-boot,dm-pre-reloc;
|
|
#clock-cells = <1>;
|
|
compatible = "xlnx,zynqmp-clk";
|
|
clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>,
|
|
<&aux_ref_clk>, <>_crx_ref_clk>;
|
|
clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk",
|
|
"aux_ref_clk", "gt_crx_ref_clk";
|
|
};
|
|
};
|
|
|
|
&can0 {
|
|
clocks = <&zynqmp_clk CAN0_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&can1 {
|
|
clocks = <&zynqmp_clk CAN1_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&cpu0 {
|
|
clocks = <&zynqmp_clk ACPU>;
|
|
};
|
|
|
|
&fpd_dma_chan1 {
|
|
clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&fpd_dma_chan2 {
|
|
clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&fpd_dma_chan3 {
|
|
clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&fpd_dma_chan4 {
|
|
clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&fpd_dma_chan5 {
|
|
clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&fpd_dma_chan6 {
|
|
clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&fpd_dma_chan7 {
|
|
clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&fpd_dma_chan8 {
|
|
clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&gpu {
|
|
clocks = <&zynqmp_clk GPU_REF>, <&zynqmp_clk GPU_PP0_REF>, <&zynqmp_clk GPU_PP1_REF>;
|
|
};
|
|
|
|
&lpd_dma_chan1 {
|
|
clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&lpd_dma_chan2 {
|
|
clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&lpd_dma_chan3 {
|
|
clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&lpd_dma_chan4 {
|
|
clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&lpd_dma_chan5 {
|
|
clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&lpd_dma_chan6 {
|
|
clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&lpd_dma_chan7 {
|
|
clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&lpd_dma_chan8 {
|
|
clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&nand0 {
|
|
clocks = <&zynqmp_clk NAND_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&gem0 {
|
|
clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>,
|
|
<&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>,
|
|
<&zynqmp_clk GEM_TSU>;
|
|
};
|
|
|
|
&gem1 {
|
|
clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
|
|
<&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
|
|
<&zynqmp_clk GEM_TSU>;
|
|
};
|
|
|
|
&gem2 {
|
|
clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>,
|
|
<&zynqmp_clk GEM2_TX>, <&zynqmp_clk GEM2_RX>,
|
|
<&zynqmp_clk GEM_TSU>;
|
|
};
|
|
|
|
&gem3 {
|
|
clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>,
|
|
<&zynqmp_clk GEM3_TX>, <&zynqmp_clk GEM3_RX>,
|
|
<&zynqmp_clk GEM_TSU>;
|
|
};
|
|
|
|
&gpio {
|
|
clocks = <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&i2c0 {
|
|
clocks = <&zynqmp_clk I2C0_REF>;
|
|
};
|
|
|
|
&i2c1 {
|
|
clocks = <&zynqmp_clk I2C1_REF>;
|
|
};
|
|
|
|
&pcie {
|
|
clocks = <&zynqmp_clk PCIE_REF>;
|
|
};
|
|
|
|
&qspi {
|
|
clocks = <&zynqmp_clk QSPI_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&sata {
|
|
clocks = <&zynqmp_clk SATA_REF>;
|
|
};
|
|
|
|
&sdhci0 {
|
|
clocks = <&zynqmp_clk SDIO0_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
assigned-clocks = <&zynqmp_clk SDIO0_REF>;
|
|
};
|
|
|
|
&sdhci1 {
|
|
clocks = <&zynqmp_clk SDIO1_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
assigned-clocks = <&zynqmp_clk SDIO1_REF>;
|
|
};
|
|
|
|
&spi0 {
|
|
clocks = <&zynqmp_clk SPI0_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&spi1 {
|
|
clocks = <&zynqmp_clk SPI1_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&ttc0 {
|
|
clocks = <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&ttc1 {
|
|
clocks = <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&ttc2 {
|
|
clocks = <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&ttc3 {
|
|
clocks = <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&uart0 {
|
|
clocks = <&zynqmp_clk UART0_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&uart1 {
|
|
clocks = <&zynqmp_clk UART1_REF>, <&zynqmp_clk LPD_LSBUS>;
|
|
};
|
|
|
|
&usb0 {
|
|
clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
|
|
assigned-clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
|
|
};
|
|
|
|
&usb1 {
|
|
clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
|
|
assigned-clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
|
|
};
|
|
|
|
&watchdog0 {
|
|
clocks = <&zynqmp_clk WDT>;
|
|
};
|
|
|
|
&lpd_watchdog {
|
|
clocks = <&zynqmp_clk LPD_WDT>;
|
|
};
|
|
|
|
&xilinx_ams {
|
|
clocks = <&zynqmp_clk AMS_REF>;
|
|
};
|
|
|
|
&zynqmp_pcap {
|
|
clocks = <&zynqmp_clk PCAP>;
|
|
};
|
|
|
|
&zynqmp_dpdma {
|
|
clocks = <&zynqmp_clk DPDMA_REF>;
|
|
assigned-clocks = <&zynqmp_clk DPDMA_REF>; /* apll */
|
|
};
|
|
|
|
&zynqmp_dpsub {
|
|
clocks = <&zynqmp_clk TOPSW_LSBUS>,
|
|
<&zynqmp_clk DP_AUDIO_REF>,
|
|
<&zynqmp_clk DP_VIDEO_REF>;
|
|
assigned-clocks = <&zynqmp_clk DP_STC_REF>,
|
|
<&zynqmp_clk DP_AUDIO_REF>,
|
|
<&zynqmp_clk DP_VIDEO_REF>; /* rpll, rpll, vpll */
|
|
};
|