u-boot/board/samsung/origen/origen.c
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

139 lines
2.9 KiB
C

/*
* Copyright (C) 2011 Samsung Electronics
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/periph.h>
#include <asm/arch/pinmux.h>
DECLARE_GLOBAL_DATA_PTR;
struct exynos4_gpio_part1 *gpio1;
struct exynos4_gpio_part2 *gpio2;
int board_init(void)
{
gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
return 0;
}
static int board_uart_init(void)
{
int err;
err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
if (err) {
debug("UART0 not configured\n");
return err;
}
err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
if (err) {
debug("UART1 not configured\n");
return err;
}
err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
if (err) {
debug("UART2 not configured\n");
return err;
}
err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
if (err) {
debug("UART3 not configured\n");
return err;
}
return 0;
}
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
int err;
err = board_uart_init();
if (err) {
debug("UART init failed\n");
return err;
}
return err;
}
#endif
int dram_init(void)
{
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
+ get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE)
+ get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE)
+ get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE);
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, \
PHYS_SDRAM_1_SIZE);
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, \
PHYS_SDRAM_2_SIZE);
gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3, \
PHYS_SDRAM_3_SIZE);
gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4, \
PHYS_SDRAM_4_SIZE);
}
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
printf("\nBoard: ORIGEN\n");
return 0;
}
#endif
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
int i, err;
/*
* MMC2 SD card GPIO:
*
* GPK2[0] SD_2_CLK(2)
* GPK2[1] SD_2_CMD(2)
* GPK2[2] SD_2_CDn
* GPK2[3:6] SD_2_DATA[0:3](2)
*/
for (i = 0; i < 7; i++) {
/* GPK2[0:6] special function 2 */
s5p_gpio_cfg_pin(&gpio2->k2, i, GPIO_FUNC(0x2));
/* GPK2[0:6] drv 4x */
s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
/* GPK2[0:1] pull disable */
if (i == 0 || i == 1) {
s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
continue;
}
/* GPK2[2:6] pull up */
s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_UP);
}
err = s5p_mmc_init(2, 4);
return err;
}
#endif