u-boot/board/freescale/ls1021atwr/README
Wang Huan c8a7d9dab0 arm: ls102xa: Add basic support for LS1021ATWR board
LS102xA is an ARMv7 implementation. This patch is to add
basic support for LS1021ATWR board.
 One DDR controller
 DUART1 is used as the console

For the detail board information, please refer to README.

Signed-off-by: Chen Lu <chen.lu@freescale.com>
Signed-off-by: Yuan Yao <yao.yuan@freescale.com>
Signed-off-by: Alison Wang <alison.wang@freescale.com>
2014-09-08 10:30:35 -07:00

109 lines
4.5 KiB
Text

Overview
--------
The LS1021ATWR is a Freescale reference board that hosts the LS1021A SoC.
LS1021A SoC Overview
------------------
The QorIQ LS1 family, which includes the LS1021A communications processor,
is built on Layerscape architecture, the industry's first software-aware,
core-agnostic networking architecture to offer unprecedented efficiency
and scale.
A member of the value-performance tier, the QorIQ LS1021A processor provides
extensive integration and power efficiency for fanless, small form factor
enterprise networking applications. Incorporating dual ARM Cortex-A7 cores
running up to 1.0 GHz, the LS1021A processor delivers pre-silicon CoreMark
performance of over 6,000, as well as virtualization support, advanced
security features and the broadest array of high-speed interconnects and
optimized peripheral features ever offered in a sub-3 W processor.
The QorIQ LS1021A processor features an integrated LCD controller,
CAN controller for implementing industrial protocols, DDR3L/4 running
up to 1600 MHz, integrated security engine and QUICC Engine, and ECC
protection on both L1 and L2 caches. The LS1021A processor is pin- and
software-compatible with the QorIQ LS1020A and LS1022A processors.
The LS1021A SoC includes the following function and features:
- ARM Cortex-A7 MPCore compliant with ARMv7-A architecture
- Dual high-preformance ARM Cortex-A7 cores, each core includes:
- 32 Kbyte L1 Instruction Cache and Data Cache for each core (ECC protection)
- 512 Kbyte shared coherent L2 Cache (with ECC protection)
- NEON Co-processor (per core)
- 40-bit physical addressing
- Vector floating-point support
- ARM Core-Link CCI-400 Cache Coherent Interconnect
- One DDR3L/DDR4 SDRAM memory controller with x8/x16/x32-bit configuration
supporting speeds up to 1600Mtps
- ECC and interleaving support
- VeTSEC Ethernet complex
- Up to 3x virtualized 10/100/1000 Ethernet controllers
- MII, RMII, RGMII, and SGMII support
- QoS, lossless flow control, and IEEE 1588 support
- 4-lane 6GHz SerDes
- High speed interconnect (4 SerDes lanes with are muxed for these protocol)
- Two PCI Express Gen2 controllers running at up to 5 GHz
- One Serial ATA 3.0 supporting 6 GT/s operation
- Two SGMII interfaces supporting 1000 Mbps
- Additional peripheral interfaces
- One high-speed USB 3.0 controller with integrated PHY and one high-speed
USB 2.00 controller with ULPI
- Integrated flash controller (IFC) with 16-bit interface
- Quad SPI NOR Flash
- One enhanced Secure digital host controller
- Display controller unit (DCU) 24-bit RGB (12-bit DDR pin interface)
- Ten UARTs comprised of two 16550 compliant DUARTs, and six low power
UARTs
- Three I2C controllers
- Eight FlexTimers four supporting PWM and four FlexCAN ports
- Four GPIO controllers supporting up to 109 general purpose I/O signals
- Integrated advanced audio block:
- Four synchronous audio interfaces (SAI)
- Sony/Philips Digital Interconnect Format (SPDIF)
- Asynchronous Sample Rate Converter (ASRC)
- Hardware based crypto offload engine
- IPSec forwarding at up to 1Gbps
- QorIQ Trust Architecture, Secure Boot, and ARM TrustZone supported
- Public key hardware accelerator
- True Random Number Generator (NIST Certified)
- Advanced Encryption Standard Accelerators (AESA)
- Data Encryption Standard Accelerators
- QUICC Engine ULite block
- Two universal communication controllers (TDM and HDLC) supporting 64
multichannels, each running at 64 Kbps
- Support for 256 channels of HDLC
- QorIQ TrustArchitecture with Secure Boot, as well as ARM TrustZone supported
LS1021ATWR board Overview
-------------------------
- DDR Controller
- Supports rates of up to 1600 MHz data-rate
- Supports one DDR3LP SDRAM.
- IFC/Local Bus
- NOR: 128MB 16-bit NOR Flash
- Ethernet
- Three on-board RGMII 10/100/1G ethernet ports.
- CPLD
- Clocks
- System and DDR clock (SYSCLK, DDRCLK)
- SERDES clocks
- Power Supplies
- SDHC
- SDHC/SDXC connector
- Other IO
- One Serial port
- Three I2C ports
Memory map
-----------
The addresses in brackets are physical addresses.
Start Address End Address Description Size
0x00_0000_0000 0x00_000F_FFFF Secure Boot ROM 1MB
0x00_0100_0000 0x00_0FFF_FFFF CCSRBAR 240MB
0x00_1000_0000 0x00_1000_FFFF OCRAM0 64KB
0x00_1001_0000 0x00_1001_FFFF OCRAM1 64KB
0x00_2000_0000 0x00_20FF_FFFF DCSR 16MB
0x00_4000_0000 0x00_5FFF_FFFF QSPI 512MB
0x00_6000_0000 0x00_67FF_FFFF IFC - NOR Flash 128MB
0x00_8000_0000 0x00_FFFF_FFFF DRAM1 2GB