mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 09:27:35 +00:00
0dd38a35f4
Some DDR related structures present in fsl_ddr_dimm_params.h, fsl_ddr_sdram.h, ddr_spd.h has various parameters with embedded acronyms capitalized that trigger the CamelCase warning in checkpatch.pl Convert those variable names to smallcase naming convention and modify all files which are using these structures with modified structures. Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
341 lines
16 KiB
C
341 lines
16 KiB
C
/*
|
|
* Copyright 2008 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* Version 2 as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#ifndef _DDR_SPD_H_
|
|
#define _DDR_SPD_H_
|
|
|
|
/*
|
|
* Format from "JEDEC Standard No. 21-C,
|
|
* Appendix D: Rev 1.0: SPD's for DDR SDRAM
|
|
*/
|
|
typedef struct ddr1_spd_eeprom_s {
|
|
unsigned char info_size; /* 0 # bytes written into serial memory */
|
|
unsigned char chip_size; /* 1 Total # bytes of SPD memory device */
|
|
unsigned char mem_type; /* 2 Fundamental memory type */
|
|
unsigned char nrow_addr; /* 3 # of Row Addresses on this assembly */
|
|
unsigned char ncol_addr; /* 4 # of Column Addrs on this assembly */
|
|
unsigned char nrows; /* 5 Number of DIMM Banks */
|
|
unsigned char dataw_lsb; /* 6 Data Width of this assembly */
|
|
unsigned char dataw_msb; /* 7 ... Data Width continuation */
|
|
unsigned char voltage; /* 8 Voltage intf std of this assembly */
|
|
unsigned char clk_cycle; /* 9 SDRAM Cycle time @ CL=X */
|
|
unsigned char clk_access; /* 10 SDRAM Access from Clk @ CL=X (tAC) */
|
|
unsigned char config; /* 11 DIMM Configuration type */
|
|
unsigned char refresh; /* 12 Refresh Rate/Type */
|
|
unsigned char primw; /* 13 Primary SDRAM Width */
|
|
unsigned char ecw; /* 14 Error Checking SDRAM width */
|
|
unsigned char min_delay; /* 15 for Back to Back Random Address */
|
|
unsigned char burstl; /* 16 Burst Lengths Supported */
|
|
unsigned char nbanks; /* 17 # of Banks on SDRAM Device */
|
|
unsigned char cas_lat; /* 18 CAS# Latencies Supported */
|
|
unsigned char cs_lat; /* 19 CS# Latency */
|
|
unsigned char write_lat; /* 20 Write Latency (aka Write Recovery) */
|
|
unsigned char mod_attr; /* 21 SDRAM Module Attributes */
|
|
unsigned char dev_attr; /* 22 SDRAM Device Attributes */
|
|
unsigned char clk_cycle2; /* 23 Min SDRAM Cycle time @ CL=X-0.5 */
|
|
unsigned char clk_access2; /* 24 SDRAM Access from
|
|
Clk @ CL=X-0.5 (tAC) */
|
|
unsigned char clk_cycle3; /* 25 Min SDRAM Cycle time @ CL=X-1 */
|
|
unsigned char clk_access3; /* 26 Max Access from Clk @ CL=X-1 (tAC) */
|
|
unsigned char trp; /* 27 Min Row Precharge Time (tRP)*/
|
|
unsigned char trrd; /* 28 Min Row Active to Row Active (tRRD) */
|
|
unsigned char trcd; /* 29 Min RAS to CAS Delay (tRCD) */
|
|
unsigned char tras; /* 30 Minimum RAS Pulse Width (tRAS) */
|
|
unsigned char bank_dens; /* 31 Density of each bank on module */
|
|
unsigned char ca_setup; /* 32 Addr + Cmd Setup Time Before Clk */
|
|
unsigned char ca_hold; /* 33 Addr + Cmd Hold Time After Clk */
|
|
unsigned char data_setup; /* 34 Data Input Setup Time Before Strobe */
|
|
unsigned char data_hold; /* 35 Data Input Hold Time After Strobe */
|
|
unsigned char res_36_40[5];/* 36-40 reserved for VCSDRAM */
|
|
unsigned char trc; /* 41 Min Active to Auto refresh time tRC */
|
|
unsigned char trfc; /* 42 Min Auto to Active period tRFC */
|
|
unsigned char tckmax; /* 43 Max device cycle time tCKmax */
|
|
unsigned char tdqsq; /* 44 Max DQS to DQ skew (tDQSQ max) */
|
|
unsigned char tqhs; /* 45 Max Read DataHold skew (tQHS) */
|
|
unsigned char res_46; /* 46 Reserved */
|
|
unsigned char dimm_height; /* 47 DDR SDRAM DIMM Height */
|
|
unsigned char res_48_61[14]; /* 48-61 Reserved */
|
|
unsigned char spd_rev; /* 62 SPD Data Revision Code */
|
|
unsigned char cksum; /* 63 Checksum for bytes 0-62 */
|
|
unsigned char mid[8]; /* 64-71 Mfr's JEDEC ID code per JEP-106 */
|
|
unsigned char mloc; /* 72 Manufacturing Location */
|
|
unsigned char mpart[18]; /* 73 Manufacturer's Part Number */
|
|
unsigned char rev[2]; /* 91 Revision Code */
|
|
unsigned char mdate[2]; /* 93 Manufacturing Date */
|
|
unsigned char sernum[4]; /* 95 Assembly Serial Number */
|
|
unsigned char mspec[27]; /* 99-127 Manufacturer Specific Data */
|
|
|
|
} ddr1_spd_eeprom_t;
|
|
|
|
/*
|
|
* Format from "JEDEC Appendix X: Serial Presence Detects for DDR2 SDRAM",
|
|
* SPD Revision 1.2
|
|
*/
|
|
typedef struct ddr2_spd_eeprom_s {
|
|
unsigned char info_size; /* 0 # bytes written into serial memory */
|
|
unsigned char chip_size; /* 1 Total # bytes of SPD memory device */
|
|
unsigned char mem_type; /* 2 Fundamental memory type */
|
|
unsigned char nrow_addr; /* 3 # of Row Addresses on this assembly */
|
|
unsigned char ncol_addr; /* 4 # of Column Addrs on this assembly */
|
|
unsigned char mod_ranks; /* 5 Number of DIMM Ranks */
|
|
unsigned char dataw; /* 6 Module Data Width */
|
|
unsigned char res_7; /* 7 Reserved */
|
|
unsigned char voltage; /* 8 Voltage intf std of this assembly */
|
|
unsigned char clk_cycle; /* 9 SDRAM Cycle time @ CL=X */
|
|
unsigned char clk_access; /* 10 SDRAM Access from Clk @ CL=X (tAC) */
|
|
unsigned char config; /* 11 DIMM Configuration type */
|
|
unsigned char refresh; /* 12 Refresh Rate/Type */
|
|
unsigned char primw; /* 13 Primary SDRAM Width */
|
|
unsigned char ecw; /* 14 Error Checking SDRAM width */
|
|
unsigned char res_15; /* 15 Reserved */
|
|
unsigned char burstl; /* 16 Burst Lengths Supported */
|
|
unsigned char nbanks; /* 17 # of Banks on Each SDRAM Device */
|
|
unsigned char cas_lat; /* 18 CAS# Latencies Supported */
|
|
unsigned char mech_char; /* 19 DIMM Mechanical Characteristics */
|
|
unsigned char dimm_type; /* 20 DIMM type information */
|
|
unsigned char mod_attr; /* 21 SDRAM Module Attributes */
|
|
unsigned char dev_attr; /* 22 SDRAM Device Attributes */
|
|
unsigned char clk_cycle2; /* 23 Min SDRAM Cycle time @ CL=X-1 */
|
|
unsigned char clk_access2; /* 24 SDRAM Access from Clk @ CL=X-1 (tAC) */
|
|
unsigned char clk_cycle3; /* 25 Min SDRAM Cycle time @ CL=X-2 */
|
|
unsigned char clk_access3; /* 26 Max Access from Clk @ CL=X-2 (tAC) */
|
|
unsigned char trp; /* 27 Min Row Precharge Time (tRP)*/
|
|
unsigned char trrd; /* 28 Min Row Active to Row Active (tRRD) */
|
|
unsigned char trcd; /* 29 Min RAS to CAS Delay (tRCD) */
|
|
unsigned char tras; /* 30 Minimum RAS Pulse Width (tRAS) */
|
|
unsigned char rank_dens; /* 31 Density of each rank on module */
|
|
unsigned char ca_setup; /* 32 Addr+Cmd Setup Time Before Clk (tIS) */
|
|
unsigned char ca_hold; /* 33 Addr+Cmd Hold Time After Clk (tIH) */
|
|
unsigned char data_setup; /* 34 Data Input Setup Time
|
|
Before Strobe (tDS) */
|
|
unsigned char data_hold; /* 35 Data Input Hold Time
|
|
After Strobe (tDH) */
|
|
unsigned char twr; /* 36 Write Recovery time tWR */
|
|
unsigned char twtr; /* 37 Int write to read delay tWTR */
|
|
unsigned char trtp; /* 38 Int read to precharge delay tRTP */
|
|
unsigned char mem_probe; /* 39 Mem analysis probe characteristics */
|
|
unsigned char trctrfc_ext; /* 40 Extensions to trc and trfc */
|
|
unsigned char trc; /* 41 Min Active to Auto refresh time tRC */
|
|
unsigned char trfc; /* 42 Min Auto to Active period tRFC */
|
|
unsigned char tckmax; /* 43 Max device cycle time tCKmax */
|
|
unsigned char tdqsq; /* 44 Max DQS to DQ skew (tDQSQ max) */
|
|
unsigned char tqhs; /* 45 Max Read DataHold skew (tQHS) */
|
|
unsigned char pll_relock; /* 46 PLL Relock time */
|
|
unsigned char t_casemax; /* 47 Tcasemax */
|
|
unsigned char psi_ta_dram; /* 48 Thermal Resistance of DRAM Package from
|
|
Top (Case) to Ambient (Psi T-A DRAM) */
|
|
unsigned char dt0_mode; /* 49 DRAM Case Temperature Rise from Ambient
|
|
due to Activate-Precharge/Mode Bits
|
|
(DT0/Mode Bits) */
|
|
unsigned char dt2n_dt2q; /* 50 DRAM Case Temperature Rise from Ambient
|
|
due to Precharge/Quiet Standby
|
|
(DT2N/DT2Q) */
|
|
unsigned char dt2p; /* 51 DRAM Case Temperature Rise from Ambient
|
|
due to Precharge Power-Down (DT2P) */
|
|
unsigned char dt3n; /* 52 DRAM Case Temperature Rise from Ambient
|
|
due to Active Standby (DT3N) */
|
|
unsigned char dt3pfast; /* 53 DRAM Case Temperature Rise from Ambient
|
|
due to Active Power-Down with
|
|
Fast PDN Exit (DT3Pfast) */
|
|
unsigned char dt3pslow; /* 54 DRAM Case Temperature Rise from Ambient
|
|
due to Active Power-Down with Slow
|
|
PDN Exit (DT3Pslow) */
|
|
unsigned char dt4r_dt4r4w; /* 55 DRAM Case Temperature Rise from Ambient
|
|
due to Page Open Burst Read/DT4R4W
|
|
Mode Bit (DT4R/DT4R4W Mode Bit) */
|
|
unsigned char dt5b; /* 56 DRAM Case Temperature Rise from Ambient
|
|
due to Burst Refresh (DT5B) */
|
|
unsigned char dt7; /* 57 DRAM Case Temperature Rise from Ambient
|
|
due to Bank Interleave Reads with
|
|
Auto-Precharge (DT7) */
|
|
unsigned char psi_ta_pll; /* 58 Thermal Resistance of PLL Package form
|
|
Top (Case) to Ambient (Psi T-A PLL) */
|
|
unsigned char psi_ta_reg; /* 59 Thermal Reisitance of Register Package
|
|
from Top (Case) to Ambient
|
|
(Psi T-A Register) */
|
|
unsigned char dtpllactive; /* 60 PLL Case Temperature Rise from Ambient
|
|
due to PLL Active (DT PLL Active) */
|
|
unsigned char dtregact; /* 61 Register Case Temperature Rise from
|
|
Ambient due to Register Active/Mode Bit
|
|
(DT Register Active/Mode Bit) */
|
|
unsigned char spd_rev; /* 62 SPD Data Revision Code */
|
|
unsigned char cksum; /* 63 Checksum for bytes 0-62 */
|
|
unsigned char mid[8]; /* 64 Mfr's JEDEC ID code per JEP-106 */
|
|
unsigned char mloc; /* 72 Manufacturing Location */
|
|
unsigned char mpart[18]; /* 73 Manufacturer's Part Number */
|
|
unsigned char rev[2]; /* 91 Revision Code */
|
|
unsigned char mdate[2]; /* 93 Manufacturing Date */
|
|
unsigned char sernum[4]; /* 95 Assembly Serial Number */
|
|
unsigned char mspec[27]; /* 99-127 Manufacturer Specific Data */
|
|
|
|
} ddr2_spd_eeprom_t;
|
|
|
|
typedef struct ddr3_spd_eeprom_s {
|
|
/* General Section: Bytes 0-59 */
|
|
unsigned char info_size_crc; /* 0 # bytes written into serial memory,
|
|
CRC coverage */
|
|
unsigned char spd_rev; /* 1 Total # bytes of SPD mem device */
|
|
unsigned char mem_type; /* 2 Key Byte / Fundamental mem type */
|
|
unsigned char module_type; /* 3 Key Byte / Module Type */
|
|
unsigned char density_banks; /* 4 SDRAM Density and Banks */
|
|
unsigned char addressing; /* 5 SDRAM Addressing */
|
|
unsigned char module_vdd; /* 6 Module nominal voltage, VDD */
|
|
unsigned char organization; /* 7 Module Organization */
|
|
unsigned char bus_width; /* 8 Module Memory Bus Width */
|
|
unsigned char ftb_div; /* 9 Fine Timebase (FTB)
|
|
Dividend / Divisor */
|
|
unsigned char mtb_dividend; /* 10 Medium Timebase (MTB) Dividend */
|
|
unsigned char mtb_divisor; /* 11 Medium Timebase (MTB) Divisor */
|
|
unsigned char tck_min; /* 12 SDRAM Minimum Cycle Time */
|
|
unsigned char res_13; /* 13 Reserved */
|
|
unsigned char caslat_lsb; /* 14 CAS Latencies Supported,
|
|
Least Significant Byte */
|
|
unsigned char caslat_msb; /* 15 CAS Latencies Supported,
|
|
Most Significant Byte */
|
|
unsigned char taa_min; /* 16 Min CAS Latency Time */
|
|
unsigned char twr_min; /* 17 Min Write REcovery Time */
|
|
unsigned char trcd_min; /* 18 Min RAS# to CAS# Delay Time */
|
|
unsigned char trrd_min; /* 19 Min Row Active to
|
|
Row Active Delay Time */
|
|
unsigned char trp_min; /* 20 Min Row Precharge Delay Time */
|
|
unsigned char tras_trc_ext; /* 21 Upper Nibbles for tRAS and tRC */
|
|
unsigned char tras_min_lsb; /* 22 Min Active to Precharge
|
|
Delay Time */
|
|
unsigned char trc_min_lsb; /* 23 Min Active to Active/Refresh
|
|
Delay Time, LSB */
|
|
unsigned char trfc_min_lsb; /* 24 Min Refresh Recovery Delay Time */
|
|
unsigned char trfc_min_msb; /* 25 Min Refresh Recovery Delay Time */
|
|
unsigned char twtr_min; /* 26 Min Internal Write to
|
|
Read Command Delay Time */
|
|
unsigned char trtp_min; /* 27 Min Internal Read to Precharge
|
|
Command Delay Time */
|
|
unsigned char tfaw_msb; /* 28 Upper Nibble for tFAW */
|
|
unsigned char tfaw_min; /* 29 Min Four Activate Window
|
|
Delay Time*/
|
|
unsigned char opt_features; /* 30 SDRAM Optional Features */
|
|
unsigned char therm_ref_opt; /* 31 SDRAM Thermal and Refresh Opts */
|
|
unsigned char therm_sensor; /* 32 Module Thermal Sensor */
|
|
unsigned char device_type; /* 33 SDRAM device type */
|
|
int8_t fine_tck_min; /* 34 Fine offset for tCKmin */
|
|
int8_t fine_taa_min; /* 35 Fine offset for tAAmin */
|
|
int8_t fine_trcd_min; /* 36 Fine offset for tRCDmin */
|
|
int8_t fine_trp_min; /* 37 Fine offset for tRPmin */
|
|
int8_t fine_trc_min; /* 38 Fine offset for tRCmin */
|
|
unsigned char res_39_59[21]; /* 39-59 Reserved, General Section */
|
|
|
|
/* Module-Specific Section: Bytes 60-116 */
|
|
union {
|
|
struct {
|
|
/* 60 (Unbuffered) Module Nominal Height */
|
|
unsigned char mod_height;
|
|
/* 61 (Unbuffered) Module Maximum Thickness */
|
|
unsigned char mod_thickness;
|
|
/* 62 (Unbuffered) Reference Raw Card Used */
|
|
unsigned char ref_raw_card;
|
|
/* 63 (Unbuffered) Address Mapping from
|
|
Edge Connector to DRAM */
|
|
unsigned char addr_mapping;
|
|
/* 64-116 (Unbuffered) Reserved */
|
|
unsigned char res_64_116[53];
|
|
} unbuffered;
|
|
struct {
|
|
/* 60 (Registered) Module Nominal Height */
|
|
unsigned char mod_height;
|
|
/* 61 (Registered) Module Maximum Thickness */
|
|
unsigned char mod_thickness;
|
|
/* 62 (Registered) Reference Raw Card Used */
|
|
unsigned char ref_raw_card;
|
|
/* 63 DIMM Module Attributes */
|
|
unsigned char modu_attr;
|
|
/* 64 RDIMM Thermal Heat Spreader Solution */
|
|
unsigned char thermal;
|
|
/* 65 Register Manufacturer ID Code, Least Significant Byte */
|
|
unsigned char reg_id_lo;
|
|
/* 66 Register Manufacturer ID Code, Most Significant Byte */
|
|
unsigned char reg_id_hi;
|
|
/* 67 Register Revision Number */
|
|
unsigned char reg_rev;
|
|
/* 68 Register Type */
|
|
unsigned char reg_type;
|
|
/* 69-76 RC1,3,5...15 (MS Nibble) / RC0,2,4...14 (LS Nibble) */
|
|
unsigned char rcw[8];
|
|
} registered;
|
|
unsigned char uc[57]; /* 60-116 Module-Specific Section */
|
|
} mod_section;
|
|
|
|
/* Unique Module ID: Bytes 117-125 */
|
|
unsigned char mmid_lsb; /* 117 Module MfgID Code LSB - JEP-106 */
|
|
unsigned char mmid_msb; /* 118 Module MfgID Code MSB - JEP-106 */
|
|
unsigned char mloc; /* 119 Mfg Location */
|
|
unsigned char mdate[2]; /* 120-121 Mfg Date */
|
|
unsigned char sernum[4]; /* 122-125 Module Serial Number */
|
|
|
|
/* CRC: Bytes 126-127 */
|
|
unsigned char crc[2]; /* 126-127 SPD CRC */
|
|
|
|
/* Other Manufacturer Fields and User Space: Bytes 128-255 */
|
|
unsigned char mpart[18]; /* 128-145 Mfg's Module Part Number */
|
|
unsigned char mrev[2]; /* 146-147 Module Revision Code */
|
|
|
|
unsigned char dmid_lsb; /* 148 DRAM MfgID Code LSB - JEP-106 */
|
|
unsigned char dmid_msb; /* 149 DRAM MfgID Code MSB - JEP-106 */
|
|
|
|
unsigned char msd[26]; /* 150-175 Mfg's Specific Data */
|
|
unsigned char cust[80]; /* 176-255 Open for Customer Use */
|
|
|
|
} ddr3_spd_eeprom_t;
|
|
|
|
extern unsigned int ddr1_spd_check(const ddr1_spd_eeprom_t *spd);
|
|
extern void ddr1_spd_dump(const ddr1_spd_eeprom_t *spd);
|
|
extern unsigned int ddr2_spd_check(const ddr2_spd_eeprom_t *spd);
|
|
extern void ddr2_spd_dump(const ddr2_spd_eeprom_t *spd);
|
|
extern unsigned int ddr3_spd_check(const ddr3_spd_eeprom_t *spd);
|
|
|
|
/*
|
|
* Byte 2 Fundamental Memory Types.
|
|
*/
|
|
#define SPD_MEMTYPE_FPM (0x01)
|
|
#define SPD_MEMTYPE_EDO (0x02)
|
|
#define SPD_MEMTYPE_PIPE_NIBBLE (0x03)
|
|
#define SPD_MEMTYPE_SDRAM (0x04)
|
|
#define SPD_MEMTYPE_ROM (0x05)
|
|
#define SPD_MEMTYPE_SGRAM (0x06)
|
|
#define SPD_MEMTYPE_DDR (0x07)
|
|
#define SPD_MEMTYPE_DDR2 (0x08)
|
|
#define SPD_MEMTYPE_DDR2_FBDIMM (0x09)
|
|
#define SPD_MEMTYPE_DDR2_FBDIMM_PROBE (0x0A)
|
|
#define SPD_MEMTYPE_DDR3 (0x0B)
|
|
|
|
/* DIMM Type for DDR2 SPD (according to v1.3) */
|
|
#define DDR2_SPD_DIMMTYPE_UNDEFINED (0x00)
|
|
#define DDR2_SPD_DIMMTYPE_RDIMM (0x01)
|
|
#define DDR2_SPD_DIMMTYPE_UDIMM (0x02)
|
|
#define DDR2_SPD_DIMMTYPE_SO_DIMM (0x04)
|
|
#define DDR2_SPD_DIMMTYPE_72B_SO_CDIMM (0x06)
|
|
#define DDR2_SPD_DIMMTYPE_72B_SO_RDIMM (0x07)
|
|
#define DDR2_SPD_DIMMTYPE_MICRO_DIMM (0x08)
|
|
#define DDR2_SPD_DIMMTYPE_MINI_RDIMM (0x10)
|
|
#define DDR2_SPD_DIMMTYPE_MINI_UDIMM (0x20)
|
|
|
|
/* Byte 3 Key Byte / Module Type for DDR3 SPD */
|
|
#define DDR3_SPD_MODULETYPE_MASK (0x0f)
|
|
#define DDR3_SPD_MODULETYPE_RDIMM (0x01)
|
|
#define DDR3_SPD_MODULETYPE_UDIMM (0x02)
|
|
#define DDR3_SPD_MODULETYPE_SO_DIMM (0x03)
|
|
#define DDR3_SPD_MODULETYPE_MICRO_DIMM (0x04)
|
|
#define DDR3_SPD_MODULETYPE_MINI_RDIMM (0x05)
|
|
#define DDR3_SPD_MODULETYPE_MINI_UDIMM (0x06)
|
|
#define DDR3_SPD_MODULETYPE_MINI_CDIMM (0x07)
|
|
#define DDR3_SPD_MODULETYPE_72B_SO_UDIMM (0x08)
|
|
#define DDR3_SPD_MODULETYPE_72B_SO_RDIMM (0x09)
|
|
#define DDR3_SPD_MODULETYPE_72B_SO_CDIMM (0x0A)
|
|
#define DDR3_SPD_MODULETYPE_LRDIMM (0x0B)
|
|
#define DDR3_SPD_MODULETYPE_16B_SO_DIMM (0x0C)
|
|
#define DDR3_SPD_MODULETYPE_32B_SO_DIMM (0x0D)
|
|
|
|
#endif /* _DDR_SPD_H_ */
|