Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-03 09:59:44 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/net/mscc_eswitch/luton_switch.c
Horatiu Vultur c5620aeea4 net: Add MSCC Luton networkd driver. 
Add network driver for Microsemi Ethernet switch, it is
present on Luton SoCs.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-02-01 14:13:36 +01:00

736 lines
20 KiB
C
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2019 Microsemi Corporation
*/
#include <common.h>
#include <config.h>
#include <dm.h>
#include <dm/of_access.h>
#include <dm/of_addr.h>
#include <fdt_support.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <miiphy.h>
#include <net.h>
#include <wait_bit.h>
#include "mscc_miim.h"
#include "mscc_xfer.h"
#include "mscc_mac_table.h"
#define ANA_PORT_VLAN_CFG(x) (0x00 + 0x80 * (x))
#define ANA_PORT_VLAN_CFG_AWARE_ENA BIT(20)
#define ANA_PORT_VLAN_CFG_POP_CNT(x) ((x) << 18)
#define ANA_PORT_CPU_FWD_CFG(x) (0x50 + 0x80 * (x))
#define ANA_PORT_CPU_FWD_CFG_SRC_COPY_ENA BIT(1)
#define ANA_PORT_PORT_CFG(x) (0x60 + 0x80 * (x))
#define ANA_PORT_PORT_CFG_RECV_ENA BIT(5)
#define ANA_PGID(x) (0x1000 + 4 * (x))
#define SYS_FRM_AGING 0x8300
#define SYS_SYSTEM_RST_CFG 0x81b0
#define SYS_SYSTEM_RST_MEM_INIT BIT(0)
#define SYS_SYSTEM_RST_MEM_ENA BIT(1)
#define SYS_SYSTEM_RST_CORE_ENA BIT(2)
#define SYS_PORT_MODE(x) (0x81bc + 0x4 * (x))
#define SYS_PORT_MODE_INCL_INJ_HDR BIT(0)
#define SYS_SWITCH_PORT_MODE(x) (0x8294 + 0x4 * (x))
#define SYS_SWITCH_PORT_MODE_PORT_ENA BIT(3)
#define SYS_EGR_NO_SHARING 0x8378
#define SYS_SCH_CPU 0x85a0
#define REW_PORT_CFG(x) (0x8 + 0x80 * (x))
#define REW_PORT_CFG_IFH_INSERT_ENA BIT(7)
#define GCB_DEVCPU_RST_SOFT_CHIP_RST 0x90
#define GCB_DEVCPU_RST_SOFT_CHIP_RST_SOFT_PHY BIT(1)
#define GCB_MISC_STAT 0x11c
#define GCB_MISC_STAT_PHY_READY BIT(3)
#define QS_XTR_MAP(x) (0x10 + 4 * (x))
#define QS_XTR_MAP_GRP BIT(4)
#define QS_XTR_MAP_ENA BIT(0)
#define HSIO_PLL5G_CFG_PLL5G_CFG2 0x8
#define HSIO_RCOMP_CFG_CFG0 0x20
#define HSIO_RCOMP_CFG_CFG0_MODE_SEL(x) ((x) << 8)
#define HSIO_RCOMP_CFG_CFG0_RUN_CAL BIT(12)
#define HSIO_RCOMP_STATUS 0x24
#define HSIO_RCOMP_STATUS_BUSY BIT(12)
#define HSIO_RCOMP_STATUS_RCOMP_M GENMASK(3, 0)
#define HSIO_SERDES6G_ANA_CFG_DES_CFG 0x64
#define HSIO_SERDES6G_ANA_CFG_DES_CFG_BW_ANA(x) ((x) << 1)
#define HSIO_SERDES6G_ANA_CFG_DES_CFG_BW_HYST(x) ((x) << 5)
#define HSIO_SERDES6G_ANA_CFG_DES_CFG_MBTR_CTRL(x) ((x) << 10)
#define HSIO_SERDES6G_ANA_CFG_DES_CFG_PHS_CTRL(x) ((x) << 13)
#define HSIO_SERDES6G_ANA_CFG_IB_CFG 0x68
#define HSIO_SERDES6G_ANA_CFG_IB_CFG_RESISTOR_CTRL(x) (x)
#define HSIO_SERDES6G_ANA_CFG_IB_CFG_VBCOM(x) ((x) << 4)
#define HSIO_SERDES6G_ANA_CFG_IB_CFG_VBAC(x) ((x) << 7)
#define HSIO_SERDES6G_ANA_CFG_IB_CFG_RT(x) ((x) << 9)
#define HSIO_SERDES6G_ANA_CFG_IB_CFG_RF(x) ((x) << 14)
#define HSIO_SERDES6G_ANA_CFG_IB_CFG1 0x6c
#define HSIO_SERDES6G_ANA_CFG_IB_CFG1_RST BIT(0)
#define HSIO_SERDES6G_ANA_CFG_IB_CFG1_ENA_OFFSDC BIT(2)
#define HSIO_SERDES6G_ANA_CFG_IB_CFG1_ENA_OFFSAC BIT(3)
#define HSIO_SERDES6G_ANA_CFG_IB_CFG1_ANEG_MODE BIT(6)
#define HSIO_SERDES6G_ANA_CFG_IB_CFG1_CHF BIT(7)
#define HSIO_SERDES6G_ANA_CFG_IB_CFG1_C(x) ((x) << 8)
#define HSIO_SERDES6G_ANA_CFG_OB_CFG 0x70
#define HSIO_SERDES6G_ANA_CFG_OB_CFG_SR(x) ((x) << 4)
#define HSIO_SERDES6G_ANA_CFG_OB_CFG_SR_H BIT(8)
#define HSIO_SERDES6G_ANA_CFG_OB_CFG_POST0(x) ((x) << 23)
#define HSIO_SERDES6G_ANA_CFG_OB_CFG_POL BIT(29)
#define HSIO_SERDES6G_ANA_CFG_OB_CFG_ENA1V_MODE BIT(30)
#define HSIO_SERDES6G_ANA_CFG_OB_CFG1 0x74
#define HSIO_SERDES6G_ANA_CFG_OB_CFG1_LEV(x) (x)
#define HSIO_SERDES6G_ANA_CFG_OB_CFG1_ENA_CAS(x) ((x) << 6)
#define HSIO_SERDES6G_ANA_CFG_COMMON_CFG 0x7c
#define HSIO_SERDES6G_ANA_CFG_COMMON_CFG_IF_MODE(x) (x)
#define HSIO_SERDES6G_ANA_CFG_COMMON_CFG_ENA_LANE BIT(18)
#define HSIO_SERDES6G_ANA_CFG_COMMON_CFG_SYS_RST BIT(31)
#define HSIO_SERDES6G_ANA_CFG_PLL_CFG 0x80
#define HSIO_SERDES6G_ANA_CFG_PLL_CFG_FSM_ENA BIT(7)
#define HSIO_SERDES6G_ANA_CFG_PLL_CFG_FSM_CTRL_DATA(x) ((x) << 8)
#define HSIO_SERDES6G_ANA_CFG_SER_CFG 0x84
#define HSIO_SERDES6G_DIG_CFG_MISC_CFG 0x88
#define HSIO_SERDES6G_DIG_CFG_MISC_CFG_LANE_RST BIT(0)
#define HSIO_MCB_SERDES6G_CFG 0xac
#define HSIO_MCB_SERDES6G_CFG_WR_ONE_SHOT BIT(31)
#define HSIO_MCB_SERDES6G_CFG_ADDR(x) (x)
#define DEV_GMII_PORT_MODE_CLK 0x0
#define DEV_GMII_PORT_MODE_CLK_PHY_RST BIT(0)
#define DEV_GMII_MAC_CFG_MAC_ENA 0xc
#define DEV_GMII_MAC_CFG_MAC_ENA_RX_ENA BIT(4)
#define DEV_GMII_MAC_CFG_MAC_ENA_TX_ENA BIT(0)
#define DEV_PORT_MODE_CLK 0x4
#define DEV_PORT_MODE_CLK_PHY_RST BIT(2)
#define DEV_PORT_MODE_CLK_LINK_SPEED_1000 1
#define DEV_MAC_CFG_MAC_ENA 0x10
#define DEV_MAC_CFG_MAC_ENA_RX_ENA BIT(4)
#define DEV_MAC_CFG_MAC_ENA_TX_ENA BIT(0)
#define DEV_MAC_CFG_MAC_IFG 0x24
#define DEV_MAC_CFG_MAC_IFG_TX_IFG(x) ((x) << 8)
#define DEV_MAC_CFG_MAC_IFG_RX_IFG2(x) ((x) << 4)
#define DEV_MAC_CFG_MAC_IFG_RX_IFG1(x) (x)
#define DEV_PCS1G_CFG_PCS1G_CFG 0x40
#define DEV_PCS1G_CFG_PCS1G_CFG_PCS_ENA BIT(0)
#define DEV_PCS1G_CFG_PCS1G_MODE 0x44
#define DEV_PCS1G_CFG_PCS1G_SD 0x48
#define DEV_PCS1G_CFG_PCS1G_ANEG 0x4c
#define DEV_PCS1G_CFG_PCS1G_ANEG_ADV_ABILITY(x) ((x) << 16)
#define IFH_INJ_BYPASS BIT(31)
#define IFH_TAG_TYPE_C 0
#define MAC_VID 1
#define CPU_PORT 26
#define INTERNAL_PORT_MSK 0xFFFFFF
#define IFH_LEN 2
#define ETH_ALEN 6
#define PGID_BROADCAST 28
#define PGID_UNICAST 29
#define PGID_SRC 80
enum luton_target {
PORT0,
PORT1,
PORT2,
PORT3,
PORT4,
PORT5,
PORT6,
PORT7,
PORT8,
PORT9,
PORT10,
PORT11,
PORT12,
PORT13,
PORT14,
PORT15,
PORT16,
PORT17,
PORT18,
PORT19,
PORT20,
PORT21,
PORT22,
PORT23,
SYS,
ANA,
REW,
GCB,
QS,
HSIO,
TARGET_MAX,
};
#define MAX_PORT (PORT23 - PORT0 + 1)
#define MIN_INT_PORT PORT0
#define MAX_INT_PORT (PORT11 - PORT0 + 1)
#define MIN_EXT_PORT PORT12
#define MAX_EXT_PORT MAX_PORT
enum luton_mdio_target {
MIIM,
TARGET_MDIO_MAX,
};
enum luton_phy_id {
INTERNAL,
EXTERNAL,
NUM_PHY,
};
struct luton_private {
void __iomem *regs[TARGET_MAX];
struct mii_dev *bus[NUM_PHY];
};
static const unsigned long luton_regs_qs[] = {
[MSCC_QS_XTR_RD] = 0x18,
[MSCC_QS_XTR_FLUSH] = 0x28,
[MSCC_QS_XTR_DATA_PRESENT] = 0x2c,
[MSCC_QS_INJ_WR] = 0x3c,
[MSCC_QS_INJ_CTRL] = 0x44,
};
static const unsigned long luton_regs_ana_table[] = {
[MSCC_ANA_TABLES_MACHDATA] = 0x11b0,
[MSCC_ANA_TABLES_MACLDATA] = 0x11b4,
[MSCC_ANA_TABLES_MACACCESS] = 0x11b8,
};
static struct mscc_miim_dev miim[NUM_PHY];
static struct mii_dev *luton_mdiobus_init(struct udevice *dev,
int mdiobus_id)
{
unsigned long phy_size[NUM_PHY];
phys_addr_t phy_base[NUM_PHY];
struct ofnode_phandle_args phandle;
ofnode eth_node, node, mdio_node;
struct resource res;
struct mii_dev *bus;
fdt32_t faddr;
int i;
bus = mdio_alloc();
if (!bus)
return NULL;
/* gather only the first mdio bus */
eth_node = dev_read_first_subnode(dev);
node = ofnode_first_subnode(eth_node);
ofnode_parse_phandle_with_args(node, "phy-handle", NULL, 0, 0,
&phandle);
mdio_node = ofnode_get_parent(phandle.node);
for (i = 0; i < TARGET_MDIO_MAX; i++) {
if (ofnode_read_resource(mdio_node, i, &res)) {
pr_err("%s: get OF resource failed\n", __func__);
return NULL;
}
faddr = cpu_to_fdt32(res.start);
phy_base[i] = ofnode_translate_address(mdio_node, &faddr);
phy_size[i] = res.end - res.start;
}
strcpy(bus->name, "miim-internal");
miim[mdiobus_id].regs = ioremap(phy_base[mdiobus_id],
phy_size[mdiobus_id]);
bus->priv = &miim[mdiobus_id];
bus->read = mscc_miim_read;
bus->write = mscc_miim_write;
if (mdio_register(bus))
return NULL;
else
return bus;
}
static void luton_stop(struct udevice *dev)
{
struct luton_private *priv = dev_get_priv(dev);
/*
* Switch core only reset affects VCORE-III bus and MIPS frequency
* and thereby also the DDR SDRAM controller. The workaround is to
* not to redirect any trafic to the CPU after the data transfer.
*/
writel(GENMASK(9, 2), priv->regs[SYS] + SYS_SCH_CPU);
}
static void luton_cpu_capture_setup(struct luton_private *priv)
{
int i;
/* map the 8 CPU extraction queues to CPU port 26 */
writel(0x0, priv->regs[SYS] + SYS_SCH_CPU);
for (i = 0; i <= 1; i++) {
/*
* One to one mapping from CPU Queue number to Group extraction
* number
*/
writel(QS_XTR_MAP_ENA | (QS_XTR_MAP_GRP * i),
priv->regs[QS] + QS_XTR_MAP(i));
/* Enable IFH insertion/parsing on CPU ports */
setbits_le32(priv->regs[REW] + REW_PORT_CFG(CPU_PORT + i),
REW_PORT_CFG_IFH_INSERT_ENA);
/* Enable IFH parsing on CPU port 0 and 1 */
setbits_le32(priv->regs[SYS] + SYS_PORT_MODE(CPU_PORT + i),
SYS_PORT_MODE_INCL_INJ_HDR);
}
/* Make VLAN aware for CPU traffic */
writel(ANA_PORT_VLAN_CFG_AWARE_ENA |
ANA_PORT_VLAN_CFG_POP_CNT(1) |
MAC_VID,
priv->regs[ANA] + ANA_PORT_VLAN_CFG(CPU_PORT));
/* Disable learning (only RECV_ENA must be set) */
writel(ANA_PORT_PORT_CFG_RECV_ENA,
priv->regs[ANA] + ANA_PORT_PORT_CFG(CPU_PORT));
/* Enable switching to/from cpu port */
setbits_le32(priv->regs[SYS] + SYS_SWITCH_PORT_MODE(CPU_PORT),
SYS_SWITCH_PORT_MODE_PORT_ENA);
setbits_le32(priv->regs[SYS] + SYS_EGR_NO_SHARING, BIT(CPU_PORT));
}
static void luton_gmii_port_init(struct luton_private *priv, int port)
{
void __iomem *regs = priv->regs[port];
writel(0, regs + DEV_GMII_PORT_MODE_CLK);
/* Enable MAC RX and TX */
writel(DEV_GMII_MAC_CFG_MAC_ENA_RX_ENA |
DEV_GMII_MAC_CFG_MAC_ENA_TX_ENA,
regs + DEV_GMII_MAC_CFG_MAC_ENA);
/* Make VLAN aware for CPU traffic */
writel(ANA_PORT_VLAN_CFG_AWARE_ENA |
ANA_PORT_VLAN_CFG_POP_CNT(1) |
MAC_VID,
priv->regs[ANA] + ANA_PORT_VLAN_CFG(port - PORT0));
/* Enable switching to/from port */
setbits_le32(priv->regs[SYS] + SYS_SWITCH_PORT_MODE(port - PORT0),
SYS_SWITCH_PORT_MODE_PORT_ENA);
}
static void luton_port_init(struct luton_private *priv, int port)
{
void __iomem *regs = priv->regs[port];
writel(0, regs + DEV_PORT_MODE_CLK);
/* Enable MAC RX and TX */
writel(DEV_MAC_CFG_MAC_ENA_RX_ENA |
DEV_MAC_CFG_MAC_ENA_TX_ENA,
regs + DEV_MAC_CFG_MAC_ENA);
/* Make VLAN aware for CPU traffic */
writel(ANA_PORT_VLAN_CFG_AWARE_ENA |
ANA_PORT_VLAN_CFG_POP_CNT(1) |
MAC_VID,
priv->regs[ANA] + ANA_PORT_VLAN_CFG(port - PORT0));
/* Enable switching to/from port */
setbits_le32(priv->regs[SYS] + SYS_SWITCH_PORT_MODE(port - PORT0),
SYS_SWITCH_PORT_MODE_PORT_ENA);
}
static void luton_ext_port_init(struct luton_private *priv, int port)
{
void __iomem *regs = priv->regs[port];
/* Enable PCS */
writel(DEV_PCS1G_CFG_PCS1G_CFG_PCS_ENA,
regs + DEV_PCS1G_CFG_PCS1G_CFG);
/* Disable Signal Detect */
writel(0, regs + DEV_PCS1G_CFG_PCS1G_SD);
/* Enable MAC RX and TX */
writel(DEV_MAC_CFG_MAC_ENA_RX_ENA |
DEV_MAC_CFG_MAC_ENA_TX_ENA,
regs + DEV_MAC_CFG_MAC_ENA);
/* Clear sgmii_mode_ena */
writel(0, regs + DEV_PCS1G_CFG_PCS1G_MODE);
/*
* Clear sw_resolve_ena(bit 0) and set adv_ability to
* something meaningful just in case
*/
writel(DEV_PCS1G_CFG_PCS1G_ANEG_ADV_ABILITY(0x20),
regs + DEV_PCS1G_CFG_PCS1G_ANEG);
/* Set MAC IFG Gaps */
writel(DEV_MAC_CFG_MAC_IFG_TX_IFG(7) |
DEV_MAC_CFG_MAC_IFG_RX_IFG1(1) |
DEV_MAC_CFG_MAC_IFG_RX_IFG2(5),
regs + DEV_MAC_CFG_MAC_IFG);
/* Set link speed and release all resets */
writel(DEV_PORT_MODE_CLK_LINK_SPEED_1000,
regs + DEV_PORT_MODE_CLK);
/* Make VLAN aware for CPU traffic */
writel(ANA_PORT_VLAN_CFG_AWARE_ENA |
ANA_PORT_VLAN_CFG_POP_CNT(1) |
MAC_VID,
priv->regs[ANA] + ANA_PORT_VLAN_CFG(port - PORT0));
/* Enable switching to/from port */
setbits_le32(priv->regs[SYS] + SYS_SWITCH_PORT_MODE(port - PORT0),
SYS_SWITCH_PORT_MODE_PORT_ENA);
}
static void serdes6g_write(struct luton_private *priv, u32 addr)
{
u32 data;
writel(HSIO_MCB_SERDES6G_CFG_WR_ONE_SHOT |
HSIO_MCB_SERDES6G_CFG_ADDR(addr),
priv->regs[HSIO] + HSIO_MCB_SERDES6G_CFG);
do {
data = readl(priv->regs[HSIO] + HSIO_MCB_SERDES6G_CFG);
} while (data & HSIO_MCB_SERDES6G_CFG_WR_ONE_SHOT);
mdelay(100);
}
static void serdes6g_cfg(struct luton_private *priv)
{
writel(HSIO_RCOMP_CFG_CFG0_MODE_SEL(0x3) |
HSIO_RCOMP_CFG_CFG0_RUN_CAL,
priv->regs[HSIO] + HSIO_RCOMP_CFG_CFG0);
while (readl(priv->regs[HSIO] + HSIO_RCOMP_STATUS) &
HSIO_RCOMP_STATUS_BUSY)
;
writel(HSIO_SERDES6G_ANA_CFG_OB_CFG_SR(0xb) |
HSIO_SERDES6G_ANA_CFG_OB_CFG_SR_H |
HSIO_SERDES6G_ANA_CFG_OB_CFG_POST0(0x10) |
HSIO_SERDES6G_ANA_CFG_OB_CFG_POL |
HSIO_SERDES6G_ANA_CFG_OB_CFG_ENA1V_MODE,
priv->regs[HSIO] + HSIO_SERDES6G_ANA_CFG_OB_CFG);
writel(HSIO_SERDES6G_ANA_CFG_OB_CFG1_LEV(0x18) |
HSIO_SERDES6G_ANA_CFG_OB_CFG1_ENA_CAS(0x1),
priv->regs[HSIO] + HSIO_SERDES6G_ANA_CFG_OB_CFG1);
writel(HSIO_SERDES6G_ANA_CFG_IB_CFG_RESISTOR_CTRL(0xc) |
HSIO_SERDES6G_ANA_CFG_IB_CFG_VBCOM(0x4) |
HSIO_SERDES6G_ANA_CFG_IB_CFG_VBAC(0x5) |
HSIO_SERDES6G_ANA_CFG_IB_CFG_RT(0xf) |
HSIO_SERDES6G_ANA_CFG_IB_CFG_RF(0x4),
priv->regs[HSIO] + HSIO_SERDES6G_ANA_CFG_IB_CFG);
writel(HSIO_SERDES6G_ANA_CFG_IB_CFG1_RST |
HSIO_SERDES6G_ANA_CFG_IB_CFG1_ENA_OFFSDC |
HSIO_SERDES6G_ANA_CFG_IB_CFG1_ENA_OFFSAC |
HSIO_SERDES6G_ANA_CFG_IB_CFG1_ANEG_MODE |
HSIO_SERDES6G_ANA_CFG_IB_CFG1_CHF |
HSIO_SERDES6G_ANA_CFG_IB_CFG1_C(0x4),
priv->regs[HSIO] + HSIO_SERDES6G_ANA_CFG_IB_CFG1);
writel(HSIO_SERDES6G_ANA_CFG_DES_CFG_BW_ANA(0x5) |
HSIO_SERDES6G_ANA_CFG_DES_CFG_BW_HYST(0x5) |
HSIO_SERDES6G_ANA_CFG_DES_CFG_MBTR_CTRL(0x2) |
HSIO_SERDES6G_ANA_CFG_DES_CFG_PHS_CTRL(0x6),
priv->regs[HSIO] + HSIO_SERDES6G_ANA_CFG_DES_CFG);
writel(HSIO_SERDES6G_ANA_CFG_PLL_CFG_FSM_ENA |
HSIO_SERDES6G_ANA_CFG_PLL_CFG_FSM_CTRL_DATA(0x78),
priv->regs[HSIO] + HSIO_SERDES6G_ANA_CFG_PLL_CFG);
writel(HSIO_SERDES6G_ANA_CFG_COMMON_CFG_IF_MODE(0x30) |
HSIO_SERDES6G_ANA_CFG_COMMON_CFG_ENA_LANE,
priv->regs[HSIO] + HSIO_SERDES6G_ANA_CFG_COMMON_CFG);
/*
* There are 4 serdes6g, configure all except serdes6g0, therefore
* the address is b1110
*/
serdes6g_write(priv, 0xe);
writel(readl(priv->regs[HSIO] + HSIO_SERDES6G_ANA_CFG_COMMON_CFG) |
HSIO_SERDES6G_ANA_CFG_COMMON_CFG_SYS_RST,
priv->regs[HSIO] + HSIO_SERDES6G_ANA_CFG_COMMON_CFG);
serdes6g_write(priv, 0xe);
clrbits_le32(priv->regs[HSIO] + HSIO_SERDES6G_ANA_CFG_IB_CFG1,
HSIO_SERDES6G_ANA_CFG_IB_CFG1_RST);
writel(HSIO_SERDES6G_DIG_CFG_MISC_CFG_LANE_RST,
priv->regs[HSIO] + HSIO_SERDES6G_DIG_CFG_MISC_CFG);
serdes6g_write(priv, 0xe);
}
static int luton_switch_init(struct luton_private *priv)
{
setbits_le32(priv->regs[HSIO] + HSIO_PLL5G_CFG_PLL5G_CFG2, BIT(1));
clrbits_le32(priv->regs[HSIO] + HSIO_PLL5G_CFG_PLL5G_CFG2, BIT(1));
/* Reset switch & memories */
writel(SYS_SYSTEM_RST_MEM_ENA | SYS_SYSTEM_RST_MEM_INIT,
priv->regs[SYS] + SYS_SYSTEM_RST_CFG);
/* Wait to complete */
if (wait_for_bit_le32(priv->regs[SYS] + SYS_SYSTEM_RST_CFG,
SYS_SYSTEM_RST_MEM_INIT, false, 2000, false)) {
printf("Timeout in memory reset\n");
}
/* Enable switch core */
setbits_le32(priv->regs[SYS] + SYS_SYSTEM_RST_CFG,
SYS_SYSTEM_RST_CORE_ENA);
/* Setup the Serdes6g macros */
serdes6g_cfg(priv);
return 0;
}
static int luton_initialize(struct luton_private *priv)
{
int ret, i;
/* Initialize switch memories, enable core */
ret = luton_switch_init(priv);
if (ret)
return ret;
/*
* Disable port-to-port by switching
* Put front ports in "port isolation modes" - i.e. they can't send
* to other ports - via the PGID sorce masks.
*/
for (i = 0; i < MAX_PORT; i++)
writel(0, priv->regs[ANA] + ANA_PGID(PGID_SRC + i));
/* Flush queues */
mscc_flush(priv->regs[QS], luton_regs_qs);
/* Setup frame ageing - "2 sec" - The unit is 4ns on Luton*/
writel(2000000000 / 4,
priv->regs[SYS] + SYS_FRM_AGING);
for (i = PORT0; i < MAX_PORT; i++) {
if (i < PORT10)
luton_gmii_port_init(priv, i);
else
if (i == PORT10 || i == PORT11)
luton_port_init(priv, i);
else
luton_ext_port_init(priv, i);
}
luton_cpu_capture_setup(priv);
return 0;
}
static int luton_write_hwaddr(struct udevice *dev)
{
struct luton_private *priv = dev_get_priv(dev);
struct eth_pdata *pdata = dev_get_platdata(dev);
mscc_mac_table_add(priv->regs[ANA], luton_regs_ana_table,
pdata->enetaddr, PGID_UNICAST);
writel(BIT(CPU_PORT), priv->regs[ANA] + ANA_PGID(PGID_UNICAST));
return 0;
}
static int luton_start(struct udevice *dev)
{
struct luton_private *priv = dev_get_priv(dev);
struct eth_pdata *pdata = dev_get_platdata(dev);
const unsigned char mac[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff,
0xff };
int ret;
ret = luton_initialize(priv);
if (ret)
return ret;
/* Set MAC address tables entries for CPU redirection */
mscc_mac_table_add(priv->regs[ANA], luton_regs_ana_table,
mac, PGID_BROADCAST);
writel(BIT(CPU_PORT) | INTERNAL_PORT_MSK,
priv->regs[ANA] + ANA_PGID(PGID_BROADCAST));
mscc_mac_table_add(priv->regs[ANA], luton_regs_ana_table,
pdata->enetaddr, PGID_UNICAST);
writel(BIT(CPU_PORT), priv->regs[ANA] + ANA_PGID(PGID_UNICAST));
return 0;
}
static int luton_send(struct udevice *dev, void *packet, int length)
{
struct luton_private *priv = dev_get_priv(dev);
u32 ifh[IFH_LEN];
int port = BIT(0); /* use port 0 */
u32 *buf = packet;
ifh[0] = IFH_INJ_BYPASS | port;
ifh[1] = (IFH_TAG_TYPE_C << 16);
return mscc_send(priv->regs[QS], luton_regs_qs,
ifh, IFH_LEN, buf, length);
}
static int luton_recv(struct udevice *dev, int flags, uchar **packetp)
{
struct luton_private *priv = dev_get_priv(dev);
u32 *rxbuf = (u32 *)net_rx_packets[0];
int byte_cnt = 0;
byte_cnt = mscc_recv(priv->regs[QS], luton_regs_qs, rxbuf, IFH_LEN,
true);
*packetp = net_rx_packets[0];
return byte_cnt;
}
static int luton_probe(struct udevice *dev)
{
struct luton_private *priv = dev_get_priv(dev);
int i;
struct {
enum luton_target id;
char *name;
} reg[] = {
{ PORT0, "port0" },
{ PORT1, "port1" },
{ PORT2, "port2" },
{ PORT3, "port3" },
{ PORT4, "port4" },
{ PORT5, "port5" },
{ PORT6, "port6" },
{ PORT7, "port7" },
{ PORT8, "port8" },
{ PORT9, "port9" },
{ PORT10, "port10" },
{ PORT11, "port11" },
{ PORT12, "port12" },
{ PORT13, "port13" },
{ PORT14, "port14" },
{ PORT15, "port15" },
{ PORT16, "port16" },
{ PORT17, "port17" },
{ PORT18, "port18" },
{ PORT19, "port19" },
{ PORT20, "port20" },
{ PORT21, "port21" },
{ PORT22, "port22" },
{ PORT23, "port23" },
{ SYS, "sys" },
{ ANA, "ana" },
{ REW, "rew" },
{ GCB, "gcb" },
{ QS, "qs" },
{ HSIO, "hsio" },
};
if (!priv)
return -EINVAL;
for (i = 0; i < ARRAY_SIZE(reg); i++) {
priv->regs[reg[i].id] = dev_remap_addr_name(dev, reg[i].name);
if (!priv->regs[reg[i].id]) {
debug
("Error can't get regs base addresses for %s\n",
reg[i].name);
return -ENOMEM;
}
}
/* Release reset in the CU-PHY */
writel(0, priv->regs[GCB] + GCB_DEVCPU_RST_SOFT_CHIP_RST);
/* Ports with ext phy don't need to reset clk */
for (i = PORT0; i < MAX_INT_PORT; i++) {
if (i < PORT10)
clrbits_le32(priv->regs[i] + DEV_GMII_PORT_MODE_CLK,
DEV_GMII_PORT_MODE_CLK_PHY_RST);
else
clrbits_le32(priv->regs[i] + DEV_PORT_MODE_CLK,
DEV_PORT_MODE_CLK_PHY_RST);
}
/* Wait for internal PHY to be ready */
if (wait_for_bit_le32(priv->regs[GCB] + GCB_MISC_STAT,
GCB_MISC_STAT_PHY_READY, true, 500, false))
return -EACCES;
priv->bus[INTERNAL] = luton_mdiobus_init(dev, INTERNAL);
for (i = 0; i < MAX_INT_PORT; i++) {
phy_connect(priv->bus[INTERNAL], i, dev,
PHY_INTERFACE_MODE_NONE);
}
/*
* coma_mode is need on only one phy, because all the other phys
* will be affected.
*/
mscc_miim_write(priv->bus[INTERNAL], 0, 0, 31, 0x10);
mscc_miim_write(priv->bus[INTERNAL], 0, 0, 14, 0x800);
mscc_miim_write(priv->bus[INTERNAL], 0, 0, 31, 0);
return 0;
}
static int luton_remove(struct udevice *dev)
{
struct luton_private *priv = dev_get_priv(dev);
int i;
for (i = 0; i < NUM_PHY; i++) {
mdio_unregister(priv->bus[i]);
mdio_free(priv->bus[i]);
}
return 0;
}
static const struct eth_ops luton_ops = {
.start = luton_start,
.stop = luton_stop,
.send = luton_send,
.recv = luton_recv,
.write_hwaddr = luton_write_hwaddr,
};
static const struct udevice_id mscc_luton_ids[] = {
{.compatible = "mscc,vsc7527-switch", },
{ /* Sentinel */ }
};
U_BOOT_DRIVER(luton) = {
.name = "luton-switch",
.id = UCLASS_ETH,
.of_match = mscc_luton_ids,
.probe = luton_probe,
.remove = luton_remove,
.ops = &luton_ops,
.priv_auto_alloc_size = sizeof(struct luton_private),
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
};
Reference in a new issue View git blame Copy permalink