mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 21:13:48 +00:00
85fcf94160
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
304 lines
7 KiB
C
304 lines
7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2009 SAMSUNG Electronics
|
|
* Minkyu Kang <mk7.kang@samsung.com>
|
|
* Heungjun Kim <riverful.kim@samsung.com>
|
|
*
|
|
* based on drivers/serial/s3c64xx.c
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <asm/global_data.h>
|
|
#include <linux/compiler.h>
|
|
#include <asm/io.h>
|
|
#if !CONFIG_IS_ENABLED(ARCH_APPLE)
|
|
#include <asm/arch/clk.h>
|
|
#endif
|
|
#include <asm/arch/uart.h>
|
|
#include <serial.h>
|
|
#include <clk.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
enum {
|
|
PORT_S5P = 0,
|
|
PORT_S5L
|
|
};
|
|
|
|
#define S5L_RX_FIFO_COUNT_SHIFT 0
|
|
#define S5L_RX_FIFO_COUNT_MASK (0xf << S5L_RX_FIFO_COUNT_SHIFT)
|
|
#define S5L_RX_FIFO_FULL (1 << 8)
|
|
#define S5L_TX_FIFO_COUNT_SHIFT 4
|
|
#define S5L_TX_FIFO_COUNT_MASK (0xf << S5L_TX_FIFO_COUNT_SHIFT)
|
|
#define S5L_TX_FIFO_FULL (1 << 9)
|
|
|
|
#define S5P_RX_FIFO_COUNT_SHIFT 0
|
|
#define S5P_RX_FIFO_COUNT_MASK (0xff << S5P_RX_FIFO_COUNT_SHIFT)
|
|
#define S5P_RX_FIFO_FULL (1 << 8)
|
|
#define S5P_TX_FIFO_COUNT_SHIFT 16
|
|
#define S5P_TX_FIFO_COUNT_MASK (0xff << S5P_TX_FIFO_COUNT_SHIFT)
|
|
#define S5P_TX_FIFO_FULL (1 << 24)
|
|
|
|
/* Information about a serial port */
|
|
struct s5p_serial_plat {
|
|
struct s5p_uart *reg; /* address of registers in physical memory */
|
|
u8 reg_width; /* register width */
|
|
u8 port_id; /* uart port number */
|
|
u8 rx_fifo_count_shift;
|
|
u8 tx_fifo_count_shift;
|
|
u32 rx_fifo_count_mask;
|
|
u32 tx_fifo_count_mask;
|
|
u32 rx_fifo_full;
|
|
u32 tx_fifo_full;
|
|
};
|
|
|
|
/*
|
|
* The coefficient, used to calculate the baudrate on S5P UARTs is
|
|
* calculated as
|
|
* C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT
|
|
* however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1,
|
|
* 3 for 2, ... (2^n - 1) for n, instead, they suggest using these constants:
|
|
*/
|
|
static const int udivslot[] = {
|
|
0,
|
|
0x0080,
|
|
0x0808,
|
|
0x0888,
|
|
0x2222,
|
|
0x4924,
|
|
0x4a52,
|
|
0x54aa,
|
|
0x5555,
|
|
0xd555,
|
|
0xd5d5,
|
|
0xddd5,
|
|
0xdddd,
|
|
0xdfdd,
|
|
0xdfdf,
|
|
0xffdf,
|
|
};
|
|
|
|
static void __maybe_unused s5p_serial_init(struct s5p_uart *uart)
|
|
{
|
|
/* enable FIFOs, auto clear Rx FIFO */
|
|
writel(0x3, &uart->ufcon);
|
|
writel(0, &uart->umcon);
|
|
/* 8N1 */
|
|
writel(0x3, &uart->ulcon);
|
|
/* No interrupts, no DMA, pure polling */
|
|
writel(0x245, &uart->ucon);
|
|
}
|
|
|
|
static void __maybe_unused s5p_serial_baud(struct s5p_uart *uart, u8 reg_width,
|
|
uint uclk, int baudrate)
|
|
{
|
|
u32 val;
|
|
|
|
val = uclk / baudrate;
|
|
|
|
writel(val / 16 - 1, &uart->ubrdiv);
|
|
|
|
if (s5p_uart_divslot())
|
|
writew(udivslot[val % 16], &uart->rest.slot);
|
|
else if (reg_width == 4)
|
|
writel(val % 16, &uart->rest.value);
|
|
else
|
|
writeb(val % 16, &uart->rest.value);
|
|
}
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
int s5p_serial_setbrg(struct udevice *dev, int baudrate)
|
|
{
|
|
struct s5p_serial_plat *plat = dev_get_plat(dev);
|
|
struct s5p_uart *const uart = plat->reg;
|
|
u32 uclk;
|
|
|
|
#if CONFIG_IS_ENABLED(CLK_EXYNOS) || CONFIG_IS_ENABLED(ARCH_APPLE)
|
|
struct clk clk;
|
|
u32 ret;
|
|
|
|
ret = clk_get_by_index(dev, 1, &clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
uclk = clk_get_rate(&clk);
|
|
#else
|
|
uclk = get_uart_clk(plat->port_id);
|
|
#endif
|
|
|
|
s5p_serial_baud(uart, plat->reg_width, uclk, baudrate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s5p_serial_probe(struct udevice *dev)
|
|
{
|
|
struct s5p_serial_plat *plat = dev_get_plat(dev);
|
|
struct s5p_uart *const uart = plat->reg;
|
|
|
|
s5p_serial_init(uart);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int serial_err_check(const struct s5p_uart *const uart, int op)
|
|
{
|
|
unsigned int mask;
|
|
|
|
/*
|
|
* UERSTAT
|
|
* Break Detect [3]
|
|
* Frame Err [2] : receive operation
|
|
* Parity Err [1] : receive operation
|
|
* Overrun Err [0] : receive operation
|
|
*/
|
|
if (op)
|
|
mask = 0x8;
|
|
else
|
|
mask = 0xf;
|
|
|
|
return readl(&uart->uerstat) & mask;
|
|
}
|
|
|
|
static int s5p_serial_getc(struct udevice *dev)
|
|
{
|
|
struct s5p_serial_plat *plat = dev_get_plat(dev);
|
|
struct s5p_uart *const uart = plat->reg;
|
|
|
|
if (!(readl(&uart->ufstat) & plat->rx_fifo_count_mask))
|
|
return -EAGAIN;
|
|
|
|
serial_err_check(uart, 0);
|
|
if (plat->reg_width == 4)
|
|
return (int)(readl(&uart->urxh) & 0xff);
|
|
else
|
|
return (int)(readb(&uart->urxh) & 0xff);
|
|
}
|
|
|
|
static int s5p_serial_putc(struct udevice *dev, const char ch)
|
|
{
|
|
struct s5p_serial_plat *plat = dev_get_plat(dev);
|
|
struct s5p_uart *const uart = plat->reg;
|
|
|
|
if (readl(&uart->ufstat) & plat->tx_fifo_full)
|
|
return -EAGAIN;
|
|
|
|
if (plat->reg_width == 4)
|
|
writel(ch, &uart->utxh);
|
|
else
|
|
writeb(ch, &uart->utxh);
|
|
serial_err_check(uart, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s5p_serial_pending(struct udevice *dev, bool input)
|
|
{
|
|
struct s5p_serial_plat *plat = dev_get_plat(dev);
|
|
struct s5p_uart *const uart = plat->reg;
|
|
uint32_t ufstat = readl(&uart->ufstat);
|
|
|
|
if (input) {
|
|
return (ufstat & plat->rx_fifo_count_mask) >>
|
|
plat->rx_fifo_count_shift;
|
|
} else {
|
|
return (ufstat & plat->tx_fifo_count_mask) >>
|
|
plat->tx_fifo_count_shift;
|
|
}
|
|
}
|
|
|
|
static int s5p_serial_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct s5p_serial_plat *plat = dev_get_plat(dev);
|
|
const ulong port_type = dev_get_driver_data(dev);
|
|
fdt_addr_t addr;
|
|
|
|
addr = dev_read_addr(dev);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
plat->reg = (struct s5p_uart *)addr;
|
|
plat->reg_width = dev_read_u32_default(dev, "reg-io-width", 1);
|
|
plat->port_id = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
|
|
"id", dev_seq(dev));
|
|
|
|
if (port_type == PORT_S5L) {
|
|
plat->rx_fifo_count_shift = S5L_RX_FIFO_COUNT_SHIFT;
|
|
plat->rx_fifo_count_mask = S5L_RX_FIFO_COUNT_MASK;
|
|
plat->rx_fifo_full = S5L_RX_FIFO_FULL;
|
|
plat->tx_fifo_count_shift = S5L_TX_FIFO_COUNT_SHIFT;
|
|
plat->tx_fifo_count_mask = S5L_TX_FIFO_COUNT_MASK;
|
|
plat->tx_fifo_full = S5L_TX_FIFO_FULL;
|
|
} else {
|
|
plat->rx_fifo_count_shift = S5P_RX_FIFO_COUNT_SHIFT;
|
|
plat->rx_fifo_count_mask = S5P_RX_FIFO_COUNT_MASK;
|
|
plat->rx_fifo_full = S5P_RX_FIFO_FULL;
|
|
plat->tx_fifo_count_shift = S5P_TX_FIFO_COUNT_SHIFT;
|
|
plat->tx_fifo_count_mask = S5P_TX_FIFO_COUNT_MASK;
|
|
plat->tx_fifo_full = S5P_TX_FIFO_FULL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_serial_ops s5p_serial_ops = {
|
|
.putc = s5p_serial_putc,
|
|
.pending = s5p_serial_pending,
|
|
.getc = s5p_serial_getc,
|
|
.setbrg = s5p_serial_setbrg,
|
|
};
|
|
|
|
static const struct udevice_id s5p_serial_ids[] = {
|
|
{ .compatible = "samsung,exynos4210-uart", .data = PORT_S5P },
|
|
{ .compatible = "apple,s5l-uart", .data = PORT_S5L },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(serial_s5p) = {
|
|
.name = "serial_s5p",
|
|
.id = UCLASS_SERIAL,
|
|
.of_match = s5p_serial_ids,
|
|
.of_to_plat = s5p_serial_of_to_plat,
|
|
.plat_auto = sizeof(struct s5p_serial_plat),
|
|
.probe = s5p_serial_probe,
|
|
.ops = &s5p_serial_ops,
|
|
};
|
|
#endif
|
|
|
|
#ifdef CONFIG_DEBUG_UART_S5P
|
|
|
|
#include <debug_uart.h>
|
|
|
|
static inline void _debug_uart_init(void)
|
|
{
|
|
if (IS_ENABLED(CONFIG_DEBUG_UART_SKIP_INIT))
|
|
return;
|
|
|
|
struct s5p_uart *uart = (struct s5p_uart *)CONFIG_DEBUG_UART_BASE;
|
|
|
|
s5p_serial_init(uart);
|
|
#if CONFIG_IS_ENABLED(ARCH_APPLE)
|
|
s5p_serial_baud(uart, 4, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE);
|
|
#else
|
|
s5p_serial_baud(uart, 1, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE);
|
|
#endif
|
|
}
|
|
|
|
static inline void _debug_uart_putc(int ch)
|
|
{
|
|
struct s5p_uart *uart = (struct s5p_uart *)CONFIG_DEBUG_UART_BASE;
|
|
|
|
#if CONFIG_IS_ENABLED(ARCH_APPLE)
|
|
while (readl(&uart->ufstat) & S5L_TX_FIFO_FULL);
|
|
writel(ch, &uart->utxh);
|
|
#else
|
|
while (readl(&uart->ufstat) & S5P_TX_FIFO_FULL);
|
|
writeb(ch, &uart->utxh);
|
|
#endif
|
|
}
|
|
|
|
DEBUG_UART_FUNCS
|
|
|
|
#endif
|