u-boot/cpu/arm_cortexa8/omap3/mem.c
Matthias Ludwig 187af954cf omap3: embedd gpmc_cs into gpmc config struct
Embedd chip select configuration into struct for gpmc config
instead of having it completely separated as suggested by
Wolfgang Denk on
http://lists.denx.de/pipermail/u-boot/2009-May/052247.html

Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
2009-08-07 23:31:51 +02:00

277 lines
7.8 KiB
C

/*
* (C) Copyright 2008
* Texas Instruments, <www.ti.com>
*
* Author :
* Manikandan Pillai <mani.pillai@ti.com>
*
* Initial Code from:
* Richard Woodruff <r-woodruff2@ti.com>
* Syed Mohammed Khasim <khasim@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/mem.h>
#include <asm/arch/sys_proto.h>
#include <command.h>
/*
* Only One NAND allowed on board at a time.
* The GPMC CS Base for the same
*/
unsigned int boot_flash_base;
unsigned int boot_flash_off;
unsigned int boot_flash_sec;
unsigned int boot_flash_type;
volatile unsigned int boot_flash_env_addr;
#if defined(CONFIG_CMD_NAND)
static u32 gpmc_m_nand[GPMC_MAX_REG] = {
M_NAND_GPMC_CONFIG1,
M_NAND_GPMC_CONFIG2,
M_NAND_GPMC_CONFIG3,
M_NAND_GPMC_CONFIG4,
M_NAND_GPMC_CONFIG5,
M_NAND_GPMC_CONFIG6, 0
};
gpmc_t *gpmc_cfg_base;
#if defined(CONFIG_ENV_IS_IN_NAND)
#define GPMC_CS 0
#else
#define GPMC_CS 1
#endif
#endif
#if defined(CONFIG_CMD_ONENAND)
static u32 gpmc_onenand[GPMC_MAX_REG] = {
ONENAND_GPMC_CONFIG1,
ONENAND_GPMC_CONFIG2,
ONENAND_GPMC_CONFIG3,
ONENAND_GPMC_CONFIG4,
ONENAND_GPMC_CONFIG5,
ONENAND_GPMC_CONFIG6, 0
};
#if defined(CONFIG_ENV_IS_IN_ONENAND)
#define GPMC_CS 0
#else
#define GPMC_CS 1
#endif
#endif
static sdrc_t *sdrc_base = (sdrc_t *)OMAP34XX_SDRC_BASE;
/**************************************************************************
* make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow
* command line mem=xyz use all memory with out discontinuous support
* compiled in. Could do it at the ATAG, but there really is two banks...
* Called as part of 2nd phase DDR init.
**************************************************************************/
void make_cs1_contiguous(void)
{
u32 size, a_add_low, a_add_high;
size = get_sdr_cs_size(CS0);
size /= SZ_32M; /* find size to offset CS1 */
a_add_high = (size & 3) << 8; /* set up low field */
a_add_low = (size & 0x3C) >> 2; /* set up high field */
writel((a_add_high | a_add_low), &sdrc_base->cs_cfg);
}
/********************************************************
* mem_ok() - test used to see if timings are correct
* for a part. Helps in guessing which part
* we are currently using.
*******************************************************/
u32 mem_ok(u32 cs)
{
u32 val1, val2, addr;
u32 pattern = 0x12345678;
addr = OMAP34XX_SDRC_CS0 + get_sdr_cs_offset(cs);
writel(0x0, addr + 0x400); /* clear pos A */
writel(pattern, addr); /* pattern to pos B */
writel(0x0, addr + 4); /* remove pattern off the bus */
val1 = readl(addr + 0x400); /* get pos A value */
val2 = readl(addr); /* get val2 */
if ((val1 != 0) || (val2 != pattern)) /* see if pos A val changed */
return 0;
else
return 1;
}
/********************************************************
* sdrc_init() - init the sdrc chip selects CS0 and CS1
* - early init routines, called from flash or
* SRAM.
*******************************************************/
void sdrc_init(void)
{
/* only init up first bank here */
do_sdrc_init(CS0, EARLY_INIT);
}
/*************************************************************************
* do_sdrc_init(): initialize the SDRAM for use.
* -code sets up SDRAM basic SDRC timings for CS0
* -optimal settings can be placed here, or redone after i2c
* inspection of board info
*
* - code called once in C-Stack only context for CS0 and a possible 2nd
* time depending on memory configuration from stack+global context
**************************************************************************/
void do_sdrc_init(u32 cs, u32 early)
{
sdrc_actim_t *sdrc_actim_base;
if(cs)
sdrc_actim_base = (sdrc_actim_t *)SDRC_ACTIM_CTRL1_BASE;
else
sdrc_actim_base = (sdrc_actim_t *)SDRC_ACTIM_CTRL0_BASE;
if (early) {
/* reset sdrc controller */
writel(SOFTRESET, &sdrc_base->sysconfig);
wait_on_value(RESETDONE, RESETDONE, &sdrc_base->status,
12000000);
writel(0, &sdrc_base->sysconfig);
/* setup sdrc to ball mux */
writel(SDP_SDRC_SHARING, &sdrc_base->sharing);
/* Disable Power Down of CKE cuz of 1 CKE on combo part */
writel(SRFRONRESET | PAGEPOLICY_HIGH, &sdrc_base->power);
writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl);
sdelay(0x20000);
}
writel(RASWIDTH_13BITS | CASWIDTH_10BITS | ADDRMUXLEGACY |
RAMSIZE_128 | BANKALLOCATION | B32NOT16 | B32NOT16 |
DEEPPD | DDR_SDRAM, &sdrc_base->cs[cs].mcfg);
writel(ARCV | ARE_ARCV_1, &sdrc_base->cs[cs].rfr_ctrl);
writel(V_ACTIMA_165, &sdrc_actim_base->ctrla);
writel(V_ACTIMB_165, &sdrc_actim_base->ctrlb);
writel(CMD_NOP, &sdrc_base ->cs[cs].manual);
writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual);
writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
/*
* CAS latency 3, Write Burst = Read Burst, Serial Mode,
* Burst length = 4
*/
writel(CASL3 | BURSTLENGTH4, &sdrc_base->cs[cs].mr);
if (!mem_ok(cs))
writel(0, &sdrc_base->cs[cs].mcfg);
}
void enable_gpmc_cs_config(u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
u32 size)
{
writel(0, &cs->config7);
sdelay(1000);
/* Delay for settling */
writel(gpmc_config[0], &cs->config1);
writel(gpmc_config[1], &cs->config2);
writel(gpmc_config[2], &cs->config3);
writel(gpmc_config[3], &cs->config4);
writel(gpmc_config[4], &cs->config5);
writel(gpmc_config[5], &cs->config6);
/* Enable the config */
writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) |
(1 << 6)), &cs->config7);
sdelay(2000);
}
/*****************************************************
* gpmc_init(): init gpmc bus
* Init GPMC for x16, MuxMode (SDRAM in x32).
* This code can only be executed from SRAM or SDRAM.
*****************************************************/
void gpmc_init(void)
{
/* putting a blanket check on GPMC based on ZeBu for now */
u32 *gpmc_config = NULL;
gpmc_t *gpmc_base = (gpmc_t *)GPMC_BASE;
u32 base = 0;
u32 size = 0;
u32 f_off = CONFIG_SYS_MONITOR_LEN;
u32 f_sec = 0;
u32 config = 0;
/* global settings */
writel(0, &gpmc_base->irqenable); /* isr's sources masked */
writel(0, &gpmc_base->timeout_control);/* timeout disable */
config = readl(&gpmc_base->config);
config &= (~0xf00);
writel(config, &gpmc_base->config);
/*
* Disable the GPMC0 config set by ROM code
* It conflicts with our MPDB (both at 0x08000000)
*/
writel(0, &gpmc_base->cs[0].config7);
sdelay(1000);
#if defined(CONFIG_CMD_NAND) /* CS 0 */
gpmc_config = gpmc_m_nand;
gpmc_cfg_base = gpmc_base;
base = PISMO1_NAND_BASE;
size = PISMO1_NAND_SIZE;
enable_gpmc_cs_config(gpmc_config, &gpmc_base->cs[0], base, size);
#if defined(CONFIG_ENV_IS_IN_NAND)
f_off = SMNAND_ENV_OFFSET;
f_sec = SZ_128K;
/* env setup */
boot_flash_base = base;
boot_flash_off = f_off;
boot_flash_sec = f_sec;
boot_flash_env_addr = f_off;
#endif
#endif
#if defined(CONFIG_CMD_ONENAND)
gpmc_config = gpmc_onenand;
base = PISMO1_ONEN_BASE;
size = PISMO1_ONEN_SIZE;
enable_gpmc_cs_config(gpmc_config, &gpmc_base->cs[0], base, size);
#if defined(CONFIG_ENV_IS_IN_ONENAND)
f_off = ONENAND_ENV_OFFSET;
f_sec = SZ_128K;
/* env setup */
boot_flash_base = base;
boot_flash_off = f_off;
boot_flash_sec = f_sec;
boot_flash_env_addr = f_off;
#endif
#endif
}