mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 16:39:35 +00:00
a40fe217d1
The 'u-boot,i2c-transaction-bytes' device tree property provides information regarding number of bytes transferred by a device in a single transaction. This change is necessary to avoid hanging devices after soft reset. One notable example is communication with MC34708 device: 1. Reset when communicating with MC34708 via I2C. 2. The u-boot (after reboot -f) tries to setup the I2C and then calls force_idle_bus. In the same time MC34708 still has some data to be sent (as it transfers data in 24 bits chunks). 3. The force_idle_bus() is not able to make the bus idle as 8 SCL clocks may be not enough to have the full transmission. 4. We end up with I2C inconsistency with MC34708. This PMIC device requires 24+ SCL cycles to make finish any pending I2C transmission. Signed-off-by: Lukasz Majewski <lukma@denx.de>
715 lines
16 KiB
C
715 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2014 Google, Inc
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <i2c.h>
|
|
#include <malloc.h>
|
|
#include <dm/device-internal.h>
|
|
#include <dm/lists.h>
|
|
#include <dm/pinctrl.h>
|
|
#ifdef CONFIG_DM_GPIO
|
|
#include <asm/gpio.h>
|
|
#endif
|
|
|
|
#define I2C_MAX_OFFSET_LEN 4
|
|
|
|
enum {
|
|
PIN_SDA = 0,
|
|
PIN_SCL,
|
|
PIN_COUNT,
|
|
};
|
|
|
|
/* Useful debugging function */
|
|
void i2c_dump_msgs(struct i2c_msg *msg, int nmsgs)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < nmsgs; i++) {
|
|
struct i2c_msg *m = &msg[i];
|
|
|
|
printf(" %s %x len=%x", m->flags & I2C_M_RD ? "R" : "W",
|
|
msg->addr, msg->len);
|
|
if (!(m->flags & I2C_M_RD))
|
|
printf(": %x", m->buf[0]);
|
|
printf("\n");
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i2c_setup_offset() - Set up a new message with a chip offset
|
|
*
|
|
* @chip: Chip to use
|
|
* @offset: Byte offset within chip
|
|
* @offset_buf: Place to put byte offset
|
|
* @msg: Message buffer
|
|
* @return 0 if OK, -EADDRNOTAVAIL if the offset length is 0. In that case the
|
|
* message is still set up but will not contain an offset.
|
|
*/
|
|
static int i2c_setup_offset(struct dm_i2c_chip *chip, uint offset,
|
|
uint8_t offset_buf[], struct i2c_msg *msg)
|
|
{
|
|
int offset_len;
|
|
|
|
msg->addr = chip->chip_addr;
|
|
msg->flags = chip->flags & DM_I2C_CHIP_10BIT ? I2C_M_TEN : 0;
|
|
msg->len = chip->offset_len;
|
|
msg->buf = offset_buf;
|
|
if (!chip->offset_len)
|
|
return -EADDRNOTAVAIL;
|
|
assert(chip->offset_len <= I2C_MAX_OFFSET_LEN);
|
|
offset_len = chip->offset_len;
|
|
while (offset_len--)
|
|
*offset_buf++ = offset >> (8 * offset_len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_read_bytewise(struct udevice *dev, uint offset,
|
|
uint8_t *buffer, int len)
|
|
{
|
|
struct dm_i2c_chip *chip = dev_get_parent_platdata(dev);
|
|
struct udevice *bus = dev_get_parent(dev);
|
|
struct dm_i2c_ops *ops = i2c_get_ops(bus);
|
|
struct i2c_msg msg[2], *ptr;
|
|
uint8_t offset_buf[I2C_MAX_OFFSET_LEN];
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
if (i2c_setup_offset(chip, offset + i, offset_buf, msg))
|
|
return -EINVAL;
|
|
ptr = msg + 1;
|
|
ptr->addr = chip->chip_addr;
|
|
ptr->flags = msg->flags | I2C_M_RD;
|
|
ptr->len = 1;
|
|
ptr->buf = &buffer[i];
|
|
ptr++;
|
|
|
|
ret = ops->xfer(bus, msg, ptr - msg);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_write_bytewise(struct udevice *dev, uint offset,
|
|
const uint8_t *buffer, int len)
|
|
{
|
|
struct dm_i2c_chip *chip = dev_get_parent_platdata(dev);
|
|
struct udevice *bus = dev_get_parent(dev);
|
|
struct dm_i2c_ops *ops = i2c_get_ops(bus);
|
|
struct i2c_msg msg[1];
|
|
uint8_t buf[I2C_MAX_OFFSET_LEN + 1];
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
if (i2c_setup_offset(chip, offset + i, buf, msg))
|
|
return -EINVAL;
|
|
buf[msg->len++] = buffer[i];
|
|
|
|
ret = ops->xfer(bus, msg, 1);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dm_i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, int len)
|
|
{
|
|
struct dm_i2c_chip *chip = dev_get_parent_platdata(dev);
|
|
struct udevice *bus = dev_get_parent(dev);
|
|
struct dm_i2c_ops *ops = i2c_get_ops(bus);
|
|
struct i2c_msg msg[2], *ptr;
|
|
uint8_t offset_buf[I2C_MAX_OFFSET_LEN];
|
|
int msg_count;
|
|
|
|
if (!ops->xfer)
|
|
return -ENOSYS;
|
|
if (chip->flags & DM_I2C_CHIP_RD_ADDRESS)
|
|
return i2c_read_bytewise(dev, offset, buffer, len);
|
|
ptr = msg;
|
|
if (!i2c_setup_offset(chip, offset, offset_buf, ptr))
|
|
ptr++;
|
|
|
|
if (len) {
|
|
ptr->addr = chip->chip_addr;
|
|
ptr->flags = chip->flags & DM_I2C_CHIP_10BIT ? I2C_M_TEN : 0;
|
|
ptr->flags |= I2C_M_RD;
|
|
ptr->len = len;
|
|
ptr->buf = buffer;
|
|
ptr++;
|
|
}
|
|
msg_count = ptr - msg;
|
|
|
|
return ops->xfer(bus, msg, msg_count);
|
|
}
|
|
|
|
int dm_i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer,
|
|
int len)
|
|
{
|
|
struct dm_i2c_chip *chip = dev_get_parent_platdata(dev);
|
|
struct udevice *bus = dev_get_parent(dev);
|
|
struct dm_i2c_ops *ops = i2c_get_ops(bus);
|
|
struct i2c_msg msg[1];
|
|
|
|
if (!ops->xfer)
|
|
return -ENOSYS;
|
|
|
|
if (chip->flags & DM_I2C_CHIP_WR_ADDRESS)
|
|
return i2c_write_bytewise(dev, offset, buffer, len);
|
|
/*
|
|
* The simple approach would be to send two messages here: one to
|
|
* set the offset and one to write the bytes. However some drivers
|
|
* will not be expecting this, and some chips won't like how the
|
|
* driver presents this on the I2C bus.
|
|
*
|
|
* The API does not support separate offset and data. We could extend
|
|
* it with a flag indicating that there is data in the next message
|
|
* that needs to be processed in the same transaction. We could
|
|
* instead add an additional buffer to each message. For now, handle
|
|
* this in the uclass since it isn't clear what the impact on drivers
|
|
* would be with this extra complication. Unfortunately this means
|
|
* copying the message.
|
|
*
|
|
* Use the stack for small messages, malloc() for larger ones. We
|
|
* need to allow space for the offset (up to 4 bytes) and the message
|
|
* itself.
|
|
*/
|
|
if (len < 64) {
|
|
uint8_t buf[I2C_MAX_OFFSET_LEN + len];
|
|
|
|
i2c_setup_offset(chip, offset, buf, msg);
|
|
msg->len += len;
|
|
memcpy(buf + chip->offset_len, buffer, len);
|
|
|
|
return ops->xfer(bus, msg, 1);
|
|
} else {
|
|
uint8_t *buf;
|
|
int ret;
|
|
|
|
buf = malloc(I2C_MAX_OFFSET_LEN + len);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
i2c_setup_offset(chip, offset, buf, msg);
|
|
msg->len += len;
|
|
memcpy(buf + chip->offset_len, buffer, len);
|
|
|
|
ret = ops->xfer(bus, msg, 1);
|
|
free(buf);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
int dm_i2c_xfer(struct udevice *dev, struct i2c_msg *msg, int nmsgs)
|
|
{
|
|
struct udevice *bus = dev_get_parent(dev);
|
|
struct dm_i2c_ops *ops = i2c_get_ops(bus);
|
|
|
|
if (!ops->xfer)
|
|
return -ENOSYS;
|
|
|
|
return ops->xfer(bus, msg, nmsgs);
|
|
}
|
|
|
|
int dm_i2c_reg_read(struct udevice *dev, uint offset)
|
|
{
|
|
uint8_t val;
|
|
int ret;
|
|
|
|
ret = dm_i2c_read(dev, offset, &val, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return val;
|
|
}
|
|
|
|
int dm_i2c_reg_write(struct udevice *dev, uint offset, uint value)
|
|
{
|
|
uint8_t val = value;
|
|
|
|
return dm_i2c_write(dev, offset, &val, 1);
|
|
}
|
|
|
|
/**
|
|
* i2c_probe_chip() - probe for a chip on a bus
|
|
*
|
|
* @bus: Bus to probe
|
|
* @chip_addr: Chip address to probe
|
|
* @flags: Flags for the chip
|
|
* @return 0 if found, -ENOSYS if the driver is invalid, -EREMOTEIO if the chip
|
|
* does not respond to probe
|
|
*/
|
|
static int i2c_probe_chip(struct udevice *bus, uint chip_addr,
|
|
enum dm_i2c_chip_flags chip_flags)
|
|
{
|
|
struct dm_i2c_ops *ops = i2c_get_ops(bus);
|
|
struct i2c_msg msg[1];
|
|
int ret;
|
|
|
|
if (ops->probe_chip) {
|
|
ret = ops->probe_chip(bus, chip_addr, chip_flags);
|
|
if (!ret || ret != -ENOSYS)
|
|
return ret;
|
|
}
|
|
|
|
if (!ops->xfer)
|
|
return -ENOSYS;
|
|
|
|
/* Probe with a zero-length message */
|
|
msg->addr = chip_addr;
|
|
msg->flags = chip_flags & DM_I2C_CHIP_10BIT ? I2C_M_TEN : 0;
|
|
msg->len = 0;
|
|
msg->buf = NULL;
|
|
|
|
return ops->xfer(bus, msg, 1);
|
|
}
|
|
|
|
static int i2c_bind_driver(struct udevice *bus, uint chip_addr, uint offset_len,
|
|
struct udevice **devp)
|
|
{
|
|
struct dm_i2c_chip *chip;
|
|
char name[30], *str;
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
snprintf(name, sizeof(name), "generic_%x", chip_addr);
|
|
str = strdup(name);
|
|
if (!str)
|
|
return -ENOMEM;
|
|
ret = device_bind_driver(bus, "i2c_generic_chip_drv", str, &dev);
|
|
debug("%s: device_bind_driver: ret=%d\n", __func__, ret);
|
|
if (ret)
|
|
goto err_bind;
|
|
|
|
/* Tell the device what we know about it */
|
|
chip = dev_get_parent_platdata(dev);
|
|
chip->chip_addr = chip_addr;
|
|
chip->offset_len = offset_len;
|
|
ret = device_probe(dev);
|
|
debug("%s: device_probe: ret=%d\n", __func__, ret);
|
|
if (ret)
|
|
goto err_probe;
|
|
|
|
*devp = dev;
|
|
return 0;
|
|
|
|
err_probe:
|
|
/*
|
|
* If the device failed to probe, unbind it. There is nothing there
|
|
* on the bus so we don't want to leave it lying around
|
|
*/
|
|
device_unbind(dev);
|
|
err_bind:
|
|
free(str);
|
|
return ret;
|
|
}
|
|
|
|
int i2c_get_chip(struct udevice *bus, uint chip_addr, uint offset_len,
|
|
struct udevice **devp)
|
|
{
|
|
struct udevice *dev;
|
|
|
|
debug("%s: Searching bus '%s' for address %02x: ", __func__,
|
|
bus->name, chip_addr);
|
|
for (device_find_first_child(bus, &dev); dev;
|
|
device_find_next_child(&dev)) {
|
|
struct dm_i2c_chip *chip = dev_get_parent_platdata(dev);
|
|
int ret;
|
|
|
|
if (chip->chip_addr == chip_addr) {
|
|
ret = device_probe(dev);
|
|
debug("found, ret=%d\n", ret);
|
|
if (ret)
|
|
return ret;
|
|
*devp = dev;
|
|
return 0;
|
|
}
|
|
}
|
|
debug("not found\n");
|
|
return i2c_bind_driver(bus, chip_addr, offset_len, devp);
|
|
}
|
|
|
|
int i2c_get_chip_for_busnum(int busnum, int chip_addr, uint offset_len,
|
|
struct udevice **devp)
|
|
{
|
|
struct udevice *bus;
|
|
int ret;
|
|
|
|
ret = uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus);
|
|
if (ret) {
|
|
debug("Cannot find I2C bus %d\n", busnum);
|
|
return ret;
|
|
}
|
|
|
|
/* detect the presence of the chip on the bus */
|
|
ret = i2c_probe_chip(bus, chip_addr, 0);
|
|
debug("%s: bus='%s', address %02x, ret=%d\n", __func__, bus->name,
|
|
chip_addr, ret);
|
|
if (ret) {
|
|
debug("Cannot detect I2C chip %02x on bus %d\n", chip_addr,
|
|
busnum);
|
|
return ret;
|
|
}
|
|
|
|
ret = i2c_get_chip(bus, chip_addr, offset_len, devp);
|
|
if (ret) {
|
|
debug("Cannot find I2C chip %02x on bus %d\n", chip_addr,
|
|
busnum);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dm_i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags,
|
|
struct udevice **devp)
|
|
{
|
|
int ret;
|
|
|
|
*devp = NULL;
|
|
|
|
/* First probe that chip */
|
|
ret = i2c_probe_chip(bus, chip_addr, chip_flags);
|
|
debug("%s: bus='%s', address %02x, ret=%d\n", __func__, bus->name,
|
|
chip_addr, ret);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* The chip was found, see if we have a driver, and probe it */
|
|
ret = i2c_get_chip(bus, chip_addr, 1, devp);
|
|
debug("%s: i2c_get_chip: ret=%d\n", __func__, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int dm_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
|
|
{
|
|
struct dm_i2c_ops *ops = i2c_get_ops(bus);
|
|
struct dm_i2c_bus *i2c = dev_get_uclass_priv(bus);
|
|
int ret;
|
|
|
|
/*
|
|
* If we have a method, call it. If not then the driver probably wants
|
|
* to deal with speed changes on the next transfer. It can easily read
|
|
* the current speed from this uclass
|
|
*/
|
|
if (ops->set_bus_speed) {
|
|
ret = ops->set_bus_speed(bus, speed);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
i2c->speed_hz = speed;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dm_i2c_get_bus_speed(struct udevice *bus)
|
|
{
|
|
struct dm_i2c_ops *ops = i2c_get_ops(bus);
|
|
struct dm_i2c_bus *i2c = dev_get_uclass_priv(bus);
|
|
|
|
if (!ops->get_bus_speed)
|
|
return i2c->speed_hz;
|
|
|
|
return ops->get_bus_speed(bus);
|
|
}
|
|
|
|
int i2c_set_chip_flags(struct udevice *dev, uint flags)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct dm_i2c_chip *chip = dev_get_parent_platdata(dev);
|
|
struct dm_i2c_ops *ops = i2c_get_ops(bus);
|
|
int ret;
|
|
|
|
if (ops->set_flags) {
|
|
ret = ops->set_flags(dev, flags);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
chip->flags = flags;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int i2c_get_chip_flags(struct udevice *dev, uint *flagsp)
|
|
{
|
|
struct dm_i2c_chip *chip = dev_get_parent_platdata(dev);
|
|
|
|
*flagsp = chip->flags;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int i2c_set_chip_offset_len(struct udevice *dev, uint offset_len)
|
|
{
|
|
struct dm_i2c_chip *chip = dev_get_parent_platdata(dev);
|
|
|
|
if (offset_len > I2C_MAX_OFFSET_LEN)
|
|
return -EINVAL;
|
|
chip->offset_len = offset_len;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int i2c_get_chip_offset_len(struct udevice *dev)
|
|
{
|
|
struct dm_i2c_chip *chip = dev_get_parent_platdata(dev);
|
|
|
|
return chip->offset_len;
|
|
}
|
|
|
|
#ifdef CONFIG_DM_GPIO
|
|
static void i2c_gpio_set_pin(struct gpio_desc *pin, int bit)
|
|
{
|
|
if (bit)
|
|
dm_gpio_set_dir_flags(pin, GPIOD_IS_IN);
|
|
else
|
|
dm_gpio_set_dir_flags(pin, GPIOD_IS_OUT |
|
|
GPIOD_ACTIVE_LOW |
|
|
GPIOD_IS_OUT_ACTIVE);
|
|
}
|
|
|
|
static int i2c_gpio_get_pin(struct gpio_desc *pin)
|
|
{
|
|
return dm_gpio_get_value(pin);
|
|
}
|
|
|
|
static int i2c_deblock_gpio_loop(struct gpio_desc *sda_pin,
|
|
struct gpio_desc *scl_pin)
|
|
{
|
|
int counter = 9;
|
|
int ret = 0;
|
|
|
|
i2c_gpio_set_pin(sda_pin, 1);
|
|
i2c_gpio_set_pin(scl_pin, 1);
|
|
udelay(5);
|
|
|
|
/* Toggle SCL until slave release SDA */
|
|
while (counter-- >= 0) {
|
|
i2c_gpio_set_pin(scl_pin, 1);
|
|
udelay(5);
|
|
i2c_gpio_set_pin(scl_pin, 0);
|
|
udelay(5);
|
|
if (i2c_gpio_get_pin(sda_pin))
|
|
break;
|
|
}
|
|
|
|
/* Then, send I2C stop */
|
|
i2c_gpio_set_pin(sda_pin, 0);
|
|
udelay(5);
|
|
|
|
i2c_gpio_set_pin(scl_pin, 1);
|
|
udelay(5);
|
|
|
|
i2c_gpio_set_pin(sda_pin, 1);
|
|
udelay(5);
|
|
|
|
if (!i2c_gpio_get_pin(sda_pin) || !i2c_gpio_get_pin(scl_pin))
|
|
ret = -EREMOTEIO;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int i2c_deblock_gpio(struct udevice *bus)
|
|
{
|
|
struct gpio_desc gpios[PIN_COUNT];
|
|
int ret, ret0;
|
|
|
|
ret = gpio_request_list_by_name(bus, "gpios", gpios,
|
|
ARRAY_SIZE(gpios), GPIOD_IS_IN);
|
|
if (ret != ARRAY_SIZE(gpios)) {
|
|
debug("%s: I2C Node '%s' has no 'gpios' property %s\n",
|
|
__func__, dev_read_name(bus), bus->name);
|
|
if (ret >= 0) {
|
|
gpio_free_list(bus, gpios, ret);
|
|
ret = -ENOENT;
|
|
}
|
|
goto out;
|
|
}
|
|
|
|
ret = pinctrl_select_state(bus, "gpio");
|
|
if (ret) {
|
|
debug("%s: I2C Node '%s' has no 'gpio' pinctrl state. %s\n",
|
|
__func__, dev_read_name(bus), bus->name);
|
|
goto out_no_pinctrl;
|
|
}
|
|
|
|
ret0 = i2c_deblock_gpio_loop(&gpios[PIN_SDA], &gpios[PIN_SCL]);
|
|
|
|
ret = pinctrl_select_state(bus, "default");
|
|
if (ret) {
|
|
debug("%s: I2C Node '%s' has no 'default' pinctrl state. %s\n",
|
|
__func__, dev_read_name(bus), bus->name);
|
|
}
|
|
|
|
ret = !ret ? ret0 : ret;
|
|
|
|
out_no_pinctrl:
|
|
gpio_free_list(bus, gpios, ARRAY_SIZE(gpios));
|
|
out:
|
|
return ret;
|
|
}
|
|
#else
|
|
static int i2c_deblock_gpio(struct udevice *bus)
|
|
{
|
|
return -ENOSYS;
|
|
}
|
|
#endif // CONFIG_DM_GPIO
|
|
|
|
int i2c_deblock(struct udevice *bus)
|
|
{
|
|
struct dm_i2c_ops *ops = i2c_get_ops(bus);
|
|
|
|
if (!ops->deblock)
|
|
return i2c_deblock_gpio(bus);
|
|
|
|
return ops->deblock(bus);
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
int i2c_chip_ofdata_to_platdata(struct udevice *dev, struct dm_i2c_chip *chip)
|
|
{
|
|
int addr;
|
|
|
|
chip->offset_len = dev_read_u32_default(dev, "u-boot,i2c-offset-len",
|
|
1);
|
|
chip->flags = 0;
|
|
addr = dev_read_u32_default(dev, "reg", -1);
|
|
if (addr == -1) {
|
|
debug("%s: I2C Node '%s' has no 'reg' property %s\n", __func__,
|
|
dev_read_name(dev), dev->name);
|
|
return -EINVAL;
|
|
}
|
|
chip->chip_addr = addr;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int i2c_pre_probe(struct udevice *dev)
|
|
{
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct dm_i2c_bus *i2c = dev_get_uclass_priv(dev);
|
|
unsigned int max = 0;
|
|
ofnode node;
|
|
int ret;
|
|
|
|
i2c->max_transaction_bytes = 0;
|
|
dev_for_each_subnode(node, dev) {
|
|
ret = ofnode_read_u32(node,
|
|
"u-boot,i2c-transaction-bytes",
|
|
&max);
|
|
if (!ret && max > i2c->max_transaction_bytes)
|
|
i2c->max_transaction_bytes = max;
|
|
}
|
|
|
|
debug("%s: I2C bus: %s max transaction bytes: %d\n", __func__,
|
|
dev->name, i2c->max_transaction_bytes);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_post_probe(struct udevice *dev)
|
|
{
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct dm_i2c_bus *i2c = dev_get_uclass_priv(dev);
|
|
|
|
i2c->speed_hz = dev_read_u32_default(dev, "clock-frequency", 100000);
|
|
|
|
return dm_i2c_set_bus_speed(dev, i2c->speed_hz);
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
static int i2c_child_post_bind(struct udevice *dev)
|
|
{
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct dm_i2c_chip *plat = dev_get_parent_platdata(dev);
|
|
|
|
if (!dev_of_valid(dev))
|
|
return 0;
|
|
return i2c_chip_ofdata_to_platdata(dev, plat);
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
struct i2c_priv {
|
|
int max_id;
|
|
};
|
|
|
|
static int i2c_post_bind(struct udevice *dev)
|
|
{
|
|
struct uclass *class = dev->uclass;
|
|
struct i2c_priv *priv = class->priv;
|
|
int ret = 0;
|
|
|
|
/* Just for sure */
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
debug("%s: %s, req_seq=%d\n", __func__, dev->name, dev->req_seq);
|
|
|
|
/* if there is no alias ID, use the first free */
|
|
if (dev->req_seq == -1)
|
|
dev->req_seq = ++priv->max_id;
|
|
|
|
debug("%s: %s, new req_seq=%d\n", __func__, dev->name, dev->req_seq);
|
|
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
ret = dm_scan_fdt_dev(dev);
|
|
#endif
|
|
return ret;
|
|
}
|
|
|
|
int i2c_uclass_init(struct uclass *class)
|
|
{
|
|
struct i2c_priv *priv = class->priv;
|
|
|
|
/* Just for sure */
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
/* Get the last allocated alias. */
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL)
|
|
priv->max_id = dev_read_alias_highest_id("i2c");
|
|
#else
|
|
priv->max_id = -1;
|
|
#endif
|
|
|
|
debug("%s: highest alias id is %d\n", __func__, priv->max_id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
UCLASS_DRIVER(i2c) = {
|
|
.id = UCLASS_I2C,
|
|
.name = "i2c",
|
|
.flags = DM_UC_FLAG_SEQ_ALIAS,
|
|
.post_bind = i2c_post_bind,
|
|
.init = i2c_uclass_init,
|
|
.priv_auto_alloc_size = sizeof(struct i2c_priv),
|
|
.pre_probe = i2c_pre_probe,
|
|
.post_probe = i2c_post_probe,
|
|
.per_device_auto_alloc_size = sizeof(struct dm_i2c_bus),
|
|
.per_child_platdata_auto_alloc_size = sizeof(struct dm_i2c_chip),
|
|
.child_post_bind = i2c_child_post_bind,
|
|
};
|
|
|
|
UCLASS_DRIVER(i2c_generic) = {
|
|
.id = UCLASS_I2C_GENERIC,
|
|
.name = "i2c_generic",
|
|
};
|
|
|
|
U_BOOT_DRIVER(i2c_generic_chip_drv) = {
|
|
.name = "i2c_generic_chip_drv",
|
|
.id = UCLASS_I2C_GENERIC,
|
|
};
|