mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
85b8c5c4bf
Conflicts: arch/arm/cpu/arm926ejs/mxs/Makefile board/compulab/cm_t35/Makefile board/corscience/tricorder/Makefile board/ppcag/bg0900/Makefile drivers/bootcount/Makefile include/configs/omap4_common.h include/configs/pdnb3.h Makefile conflicts are due to additions/removals of object files on the ARM branch vs KBuild introduction on the main branch. Resolution consists in adjusting the list of object files in the main branch version. This also applies to two files which are not listed as conflicting but had to be modified: board/compulab/common/Makefile board/udoo/Makefile include/configs/omap4_common.h conflicts are due to the OMAP4 conversion to ti_armv7_common.h on the ARM side, and CONFIG_SYS_HZ removal on the main side. Resolution is to convert as this icludes removal of CONFIG_SYS_HZ. include/configs/pdnb3.h is due to a removal on ARM side. Trivial resolution is to remove the file. Note: 'git show' will also list two files just because they are new: include/configs/am335x_igep0033.h include/configs/omap3_igep00x0.h
527 lines
12 KiB
C
527 lines
12 KiB
C
/*
|
|
* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
enum pll_clocks {
|
|
PLL_SYS, /* System PLL */
|
|
PLL_BUS, /* System Bus PLL*/
|
|
PLL_USBOTG, /* OTG USB PLL */
|
|
PLL_ENET, /* ENET PLL */
|
|
};
|
|
|
|
struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
|
|
#ifdef CONFIG_MXC_OCOTP
|
|
void enable_ocotp_clk(unsigned char enable)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = __raw_readl(&imx_ccm->CCGR2);
|
|
if (enable)
|
|
reg |= MXC_CCM_CCGR2_OCOTP_CTRL_MASK;
|
|
else
|
|
reg &= ~MXC_CCM_CCGR2_OCOTP_CTRL_MASK;
|
|
__raw_writel(reg, &imx_ccm->CCGR2);
|
|
}
|
|
#endif
|
|
|
|
void enable_usboh3_clk(unsigned char enable)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = __raw_readl(&imx_ccm->CCGR6);
|
|
if (enable)
|
|
reg |= MXC_CCM_CCGR6_USBOH3_MASK;
|
|
else
|
|
reg &= ~(MXC_CCM_CCGR6_USBOH3_MASK);
|
|
__raw_writel(reg, &imx_ccm->CCGR6);
|
|
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_I2C_MXC
|
|
/* i2c_num can be from 0 - 2 */
|
|
int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
|
|
{
|
|
u32 reg;
|
|
u32 mask;
|
|
|
|
if (i2c_num > 2)
|
|
return -EINVAL;
|
|
|
|
mask = MXC_CCM_CCGR_CG_MASK
|
|
<< (MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET + (i2c_num << 1));
|
|
reg = __raw_readl(&imx_ccm->CCGR2);
|
|
if (enable)
|
|
reg |= mask;
|
|
else
|
|
reg &= ~mask;
|
|
__raw_writel(reg, &imx_ccm->CCGR2);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static u32 decode_pll(enum pll_clocks pll, u32 infreq)
|
|
{
|
|
u32 div;
|
|
|
|
switch (pll) {
|
|
case PLL_SYS:
|
|
div = __raw_readl(&imx_ccm->analog_pll_sys);
|
|
div &= BM_ANADIG_PLL_SYS_DIV_SELECT;
|
|
|
|
return infreq * (div >> 1);
|
|
case PLL_BUS:
|
|
div = __raw_readl(&imx_ccm->analog_pll_528);
|
|
div &= BM_ANADIG_PLL_528_DIV_SELECT;
|
|
|
|
return infreq * (20 + (div << 1));
|
|
case PLL_USBOTG:
|
|
div = __raw_readl(&imx_ccm->analog_usb1_pll_480_ctrl);
|
|
div &= BM_ANADIG_USB1_PLL_480_CTRL_DIV_SELECT;
|
|
|
|
return infreq * (20 + (div << 1));
|
|
case PLL_ENET:
|
|
div = __raw_readl(&imx_ccm->analog_pll_enet);
|
|
div &= BM_ANADIG_PLL_ENET_DIV_SELECT;
|
|
|
|
return (div == 3 ? 125000000 : 25000000 * (div << 1));
|
|
default:
|
|
return 0;
|
|
}
|
|
/* NOTREACHED */
|
|
}
|
|
static u32 mxc_get_pll_pfd(enum pll_clocks pll, int pfd_num)
|
|
{
|
|
u32 div;
|
|
u64 freq;
|
|
|
|
switch (pll) {
|
|
case PLL_BUS:
|
|
if (pfd_num == 3) {
|
|
/* No PFD3 on PPL2 */
|
|
return 0;
|
|
}
|
|
div = __raw_readl(&imx_ccm->analog_pfd_528);
|
|
freq = (u64)decode_pll(PLL_BUS, MXC_HCLK);
|
|
break;
|
|
case PLL_USBOTG:
|
|
div = __raw_readl(&imx_ccm->analog_pfd_480);
|
|
freq = (u64)decode_pll(PLL_USBOTG, MXC_HCLK);
|
|
break;
|
|
default:
|
|
/* No PFD on other PLL */
|
|
return 0;
|
|
}
|
|
|
|
return (freq * 18) / ((div & ANATOP_PFD_FRAC_MASK(pfd_num)) >>
|
|
ANATOP_PFD_FRAC_SHIFT(pfd_num));
|
|
}
|
|
|
|
static u32 get_mcu_main_clk(void)
|
|
{
|
|
u32 reg, freq;
|
|
|
|
reg = __raw_readl(&imx_ccm->cacrr);
|
|
reg &= MXC_CCM_CACRR_ARM_PODF_MASK;
|
|
reg >>= MXC_CCM_CACRR_ARM_PODF_OFFSET;
|
|
freq = decode_pll(PLL_SYS, MXC_HCLK);
|
|
|
|
return freq / (reg + 1);
|
|
}
|
|
|
|
u32 get_periph_clk(void)
|
|
{
|
|
u32 reg, freq = 0;
|
|
|
|
reg = __raw_readl(&imx_ccm->cbcdr);
|
|
if (reg & MXC_CCM_CBCDR_PERIPH_CLK_SEL) {
|
|
reg = __raw_readl(&imx_ccm->cbcmr);
|
|
reg &= MXC_CCM_CBCMR_PERIPH_CLK2_SEL_MASK;
|
|
reg >>= MXC_CCM_CBCMR_PERIPH_CLK2_SEL_OFFSET;
|
|
|
|
switch (reg) {
|
|
case 0:
|
|
freq = decode_pll(PLL_USBOTG, MXC_HCLK);
|
|
break;
|
|
case 1:
|
|
case 2:
|
|
freq = MXC_HCLK;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
} else {
|
|
reg = __raw_readl(&imx_ccm->cbcmr);
|
|
reg &= MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK;
|
|
reg >>= MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET;
|
|
|
|
switch (reg) {
|
|
case 0:
|
|
freq = decode_pll(PLL_BUS, MXC_HCLK);
|
|
break;
|
|
case 1:
|
|
freq = mxc_get_pll_pfd(PLL_BUS, 2);
|
|
break;
|
|
case 2:
|
|
freq = mxc_get_pll_pfd(PLL_BUS, 0);
|
|
break;
|
|
case 3:
|
|
/* static / 2 divider */
|
|
freq = mxc_get_pll_pfd(PLL_BUS, 2) / 2;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
return freq;
|
|
}
|
|
|
|
static u32 get_ipg_clk(void)
|
|
{
|
|
u32 reg, ipg_podf;
|
|
|
|
reg = __raw_readl(&imx_ccm->cbcdr);
|
|
reg &= MXC_CCM_CBCDR_IPG_PODF_MASK;
|
|
ipg_podf = reg >> MXC_CCM_CBCDR_IPG_PODF_OFFSET;
|
|
|
|
return get_ahb_clk() / (ipg_podf + 1);
|
|
}
|
|
|
|
static u32 get_ipg_per_clk(void)
|
|
{
|
|
u32 reg, perclk_podf;
|
|
|
|
reg = __raw_readl(&imx_ccm->cscmr1);
|
|
perclk_podf = reg & MXC_CCM_CSCMR1_PERCLK_PODF_MASK;
|
|
|
|
return get_ipg_clk() / (perclk_podf + 1);
|
|
}
|
|
|
|
static u32 get_uart_clk(void)
|
|
{
|
|
u32 reg, uart_podf;
|
|
u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */
|
|
reg = __raw_readl(&imx_ccm->cscdr1);
|
|
#ifdef CONFIG_MX6SL
|
|
if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
|
|
freq = MXC_HCLK;
|
|
#endif
|
|
reg &= MXC_CCM_CSCDR1_UART_CLK_PODF_MASK;
|
|
uart_podf = reg >> MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET;
|
|
|
|
return freq / (uart_podf + 1);
|
|
}
|
|
|
|
static u32 get_cspi_clk(void)
|
|
{
|
|
u32 reg, cspi_podf;
|
|
|
|
reg = __raw_readl(&imx_ccm->cscdr2);
|
|
reg &= MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK;
|
|
cspi_podf = reg >> MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
|
|
|
|
return decode_pll(PLL_USBOTG, MXC_HCLK) / (8 * (cspi_podf + 1));
|
|
}
|
|
|
|
static u32 get_axi_clk(void)
|
|
{
|
|
u32 root_freq, axi_podf;
|
|
u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
|
|
|
|
axi_podf = cbcdr & MXC_CCM_CBCDR_AXI_PODF_MASK;
|
|
axi_podf >>= MXC_CCM_CBCDR_AXI_PODF_OFFSET;
|
|
|
|
if (cbcdr & MXC_CCM_CBCDR_AXI_SEL) {
|
|
if (cbcdr & MXC_CCM_CBCDR_AXI_ALT_SEL)
|
|
root_freq = mxc_get_pll_pfd(PLL_BUS, 2);
|
|
else
|
|
root_freq = mxc_get_pll_pfd(PLL_USBOTG, 1);
|
|
} else
|
|
root_freq = get_periph_clk();
|
|
|
|
return root_freq / (axi_podf + 1);
|
|
}
|
|
|
|
static u32 get_emi_slow_clk(void)
|
|
{
|
|
u32 emi_clk_sel, emi_slow_podf, cscmr1, root_freq = 0;
|
|
|
|
cscmr1 = __raw_readl(&imx_ccm->cscmr1);
|
|
emi_clk_sel = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK;
|
|
emi_clk_sel >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_OFFSET;
|
|
emi_slow_podf = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK;
|
|
emi_slow_podf >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_OFFSET;
|
|
|
|
switch (emi_clk_sel) {
|
|
case 0:
|
|
root_freq = get_axi_clk();
|
|
break;
|
|
case 1:
|
|
root_freq = decode_pll(PLL_USBOTG, MXC_HCLK);
|
|
break;
|
|
case 2:
|
|
root_freq = mxc_get_pll_pfd(PLL_BUS, 2);
|
|
break;
|
|
case 3:
|
|
root_freq = mxc_get_pll_pfd(PLL_BUS, 0);
|
|
break;
|
|
}
|
|
|
|
return root_freq / (emi_slow_podf + 1);
|
|
}
|
|
|
|
#ifdef CONFIG_MX6SL
|
|
static u32 get_mmdc_ch0_clk(void)
|
|
{
|
|
u32 cbcmr = __raw_readl(&imx_ccm->cbcmr);
|
|
u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
|
|
u32 freq, podf;
|
|
|
|
podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) \
|
|
>> MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET;
|
|
|
|
switch ((cbcmr & MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK) >>
|
|
MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET) {
|
|
case 0:
|
|
freq = decode_pll(PLL_BUS, MXC_HCLK);
|
|
break;
|
|
case 1:
|
|
freq = mxc_get_pll_pfd(PLL_BUS, 2);
|
|
break;
|
|
case 2:
|
|
freq = mxc_get_pll_pfd(PLL_BUS, 0);
|
|
break;
|
|
case 3:
|
|
/* static / 2 divider */
|
|
freq = mxc_get_pll_pfd(PLL_BUS, 2) / 2;
|
|
}
|
|
|
|
return freq / (podf + 1);
|
|
|
|
}
|
|
|
|
int enable_fec_anatop_clock(void)
|
|
{
|
|
u32 reg = 0;
|
|
s32 timeout = 100000;
|
|
|
|
struct anatop_regs __iomem *anatop =
|
|
(struct anatop_regs __iomem *)ANATOP_BASE_ADDR;
|
|
|
|
reg = readl(&anatop->pll_enet);
|
|
if ((reg & BM_ANADIG_PLL_ENET_POWERDOWN) ||
|
|
(!(reg & BM_ANADIG_PLL_ENET_LOCK))) {
|
|
reg &= ~BM_ANADIG_PLL_ENET_POWERDOWN;
|
|
writel(reg, &anatop->pll_enet);
|
|
while (timeout--) {
|
|
if (readl(&anatop->pll_enet) & BM_ANADIG_PLL_ENET_LOCK)
|
|
break;
|
|
}
|
|
if (timeout < 0)
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* Enable FEC clock */
|
|
reg |= BM_ANADIG_PLL_ENET_ENABLE;
|
|
reg &= ~BM_ANADIG_PLL_ENET_BYPASS;
|
|
writel(reg, &anatop->pll_enet);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
static u32 get_mmdc_ch0_clk(void)
|
|
{
|
|
u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
|
|
u32 mmdc_ch0_podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK) >>
|
|
MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET;
|
|
|
|
return get_periph_clk() / (mmdc_ch0_podf + 1);
|
|
}
|
|
#endif
|
|
|
|
static u32 get_usdhc_clk(u32 port)
|
|
{
|
|
u32 root_freq = 0, usdhc_podf = 0, clk_sel = 0;
|
|
u32 cscmr1 = __raw_readl(&imx_ccm->cscmr1);
|
|
u32 cscdr1 = __raw_readl(&imx_ccm->cscdr1);
|
|
|
|
switch (port) {
|
|
case 0:
|
|
usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC1_PODF_MASK) >>
|
|
MXC_CCM_CSCDR1_USDHC1_PODF_OFFSET;
|
|
clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC1_CLK_SEL;
|
|
|
|
break;
|
|
case 1:
|
|
usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC2_PODF_MASK) >>
|
|
MXC_CCM_CSCDR1_USDHC2_PODF_OFFSET;
|
|
clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC2_CLK_SEL;
|
|
|
|
break;
|
|
case 2:
|
|
usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC3_PODF_MASK) >>
|
|
MXC_CCM_CSCDR1_USDHC3_PODF_OFFSET;
|
|
clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC3_CLK_SEL;
|
|
|
|
break;
|
|
case 3:
|
|
usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC4_PODF_MASK) >>
|
|
MXC_CCM_CSCDR1_USDHC4_PODF_OFFSET;
|
|
clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC4_CLK_SEL;
|
|
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (clk_sel)
|
|
root_freq = mxc_get_pll_pfd(PLL_BUS, 0);
|
|
else
|
|
root_freq = mxc_get_pll_pfd(PLL_BUS, 2);
|
|
|
|
return root_freq / (usdhc_podf + 1);
|
|
}
|
|
|
|
u32 imx_get_uartclk(void)
|
|
{
|
|
return get_uart_clk();
|
|
}
|
|
|
|
u32 imx_get_fecclk(void)
|
|
{
|
|
return decode_pll(PLL_ENET, MXC_HCLK);
|
|
}
|
|
|
|
int enable_sata_clock(void)
|
|
{
|
|
u32 reg = 0;
|
|
s32 timeout = 100000;
|
|
struct mxc_ccm_reg *const imx_ccm
|
|
= (struct mxc_ccm_reg *) CCM_BASE_ADDR;
|
|
|
|
/* Enable sata clock */
|
|
reg = readl(&imx_ccm->CCGR5); /* CCGR5 */
|
|
reg |= MXC_CCM_CCGR5_SATA_MASK;
|
|
writel(reg, &imx_ccm->CCGR5);
|
|
|
|
/* Enable PLLs */
|
|
reg = readl(&imx_ccm->analog_pll_enet);
|
|
reg &= ~BM_ANADIG_PLL_SYS_POWERDOWN;
|
|
writel(reg, &imx_ccm->analog_pll_enet);
|
|
reg |= BM_ANADIG_PLL_SYS_ENABLE;
|
|
while (timeout--) {
|
|
if (readl(&imx_ccm->analog_pll_enet) & BM_ANADIG_PLL_SYS_LOCK)
|
|
break;
|
|
}
|
|
if (timeout <= 0)
|
|
return -EIO;
|
|
reg &= ~BM_ANADIG_PLL_SYS_BYPASS;
|
|
writel(reg, &imx_ccm->analog_pll_enet);
|
|
reg |= BM_ANADIG_PLL_ENET_ENABLE_SATA;
|
|
writel(reg, &imx_ccm->analog_pll_enet);
|
|
|
|
return 0 ;
|
|
}
|
|
|
|
unsigned int mxc_get_clock(enum mxc_clock clk)
|
|
{
|
|
switch (clk) {
|
|
case MXC_ARM_CLK:
|
|
return get_mcu_main_clk();
|
|
case MXC_PER_CLK:
|
|
return get_periph_clk();
|
|
case MXC_AHB_CLK:
|
|
return get_ahb_clk();
|
|
case MXC_IPG_CLK:
|
|
return get_ipg_clk();
|
|
case MXC_IPG_PERCLK:
|
|
case MXC_I2C_CLK:
|
|
return get_ipg_per_clk();
|
|
case MXC_UART_CLK:
|
|
return get_uart_clk();
|
|
case MXC_CSPI_CLK:
|
|
return get_cspi_clk();
|
|
case MXC_AXI_CLK:
|
|
return get_axi_clk();
|
|
case MXC_EMI_SLOW_CLK:
|
|
return get_emi_slow_clk();
|
|
case MXC_DDR_CLK:
|
|
return get_mmdc_ch0_clk();
|
|
case MXC_ESDHC_CLK:
|
|
return get_usdhc_clk(0);
|
|
case MXC_ESDHC2_CLK:
|
|
return get_usdhc_clk(1);
|
|
case MXC_ESDHC3_CLK:
|
|
return get_usdhc_clk(2);
|
|
case MXC_ESDHC4_CLK:
|
|
return get_usdhc_clk(3);
|
|
case MXC_SATA_CLK:
|
|
return get_ahb_clk();
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Dump some core clockes.
|
|
*/
|
|
int do_mx6_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
u32 freq;
|
|
freq = decode_pll(PLL_SYS, MXC_HCLK);
|
|
printf("PLL_SYS %8d MHz\n", freq / 1000000);
|
|
freq = decode_pll(PLL_BUS, MXC_HCLK);
|
|
printf("PLL_BUS %8d MHz\n", freq / 1000000);
|
|
freq = decode_pll(PLL_USBOTG, MXC_HCLK);
|
|
printf("PLL_OTG %8d MHz\n", freq / 1000000);
|
|
freq = decode_pll(PLL_ENET, MXC_HCLK);
|
|
printf("PLL_NET %8d MHz\n", freq / 1000000);
|
|
|
|
printf("\n");
|
|
printf("IPG %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000);
|
|
printf("UART %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000);
|
|
#ifdef CONFIG_MXC_SPI
|
|
printf("CSPI %8d kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000);
|
|
#endif
|
|
printf("AHB %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000);
|
|
printf("AXI %8d kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000);
|
|
printf("DDR %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000);
|
|
printf("USDHC1 %8d kHz\n", mxc_get_clock(MXC_ESDHC_CLK) / 1000);
|
|
printf("USDHC2 %8d kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000);
|
|
printf("USDHC3 %8d kHz\n", mxc_get_clock(MXC_ESDHC3_CLK) / 1000);
|
|
printf("USDHC4 %8d kHz\n", mxc_get_clock(MXC_ESDHC4_CLK) / 1000);
|
|
printf("EMI SLOW %8d kHz\n", mxc_get_clock(MXC_EMI_SLOW_CLK) / 1000);
|
|
printf("IPG PERCLK %8d kHz\n", mxc_get_clock(MXC_IPG_PERCLK) / 1000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void enable_ipu_clock(void)
|
|
{
|
|
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
int reg;
|
|
reg = readl(&mxc_ccm->CCGR3);
|
|
reg |= MXC_CCM_CCGR3_IPU1_IPU_MASK;
|
|
writel(reg, &mxc_ccm->CCGR3);
|
|
}
|
|
/***************************************************/
|
|
|
|
U_BOOT_CMD(
|
|
clocks, CONFIG_SYS_MAXARGS, 1, do_mx6_showclocks,
|
|
"display clocks",
|
|
""
|
|
);
|