mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-27 05:23:34 +00:00
d090cbab64
Following next kernel rcc bindings, we must use a MFD RCC driver which is able to bind both clock and reset drivers. We can reuse and adapt RCC MFD driver already available for MCU SoCs (F4/F7/H7). Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
97 lines
2.5 KiB
C
97 lines
2.5 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) STMicroelectronics SA 2017
|
|
* Author(s): Patrice CHOTARD, <patrice.chotard@st.com> for STMicroelectronics.
|
|
*/
|
|
|
|
#ifndef __STM32_RCC_H_
|
|
#define __STM32_RCC_H_
|
|
|
|
#define AHB_PSC_1 0
|
|
#define AHB_PSC_2 0x8
|
|
#define AHB_PSC_4 0x9
|
|
#define AHB_PSC_8 0xA
|
|
#define AHB_PSC_16 0xB
|
|
#define AHB_PSC_64 0xC
|
|
#define AHB_PSC_128 0xD
|
|
#define AHB_PSC_256 0xE
|
|
#define AHB_PSC_512 0xF
|
|
|
|
#define APB_PSC_1 0
|
|
#define APB_PSC_2 0x4
|
|
#define APB_PSC_4 0x5
|
|
#define APB_PSC_8 0x6
|
|
#define APB_PSC_16 0x7
|
|
|
|
struct pll_psc {
|
|
u8 pll_m;
|
|
u16 pll_n;
|
|
u8 pll_p;
|
|
u8 pll_q;
|
|
u8 ahb_psc;
|
|
u8 apb1_psc;
|
|
u8 apb2_psc;
|
|
};
|
|
|
|
struct stm32_clk_info {
|
|
struct pll_psc sys_pll_psc;
|
|
bool has_overdrive;
|
|
bool v2;
|
|
};
|
|
|
|
enum soc_family {
|
|
STM32F42X,
|
|
STM32F469,
|
|
STM32F7,
|
|
STM32MP1,
|
|
};
|
|
|
|
enum apb {
|
|
APB1,
|
|
APB2,
|
|
};
|
|
|
|
struct stm32_rcc_clk {
|
|
char *drv_name;
|
|
enum soc_family soc;
|
|
};
|
|
|
|
struct stm32_rcc_regs {
|
|
u32 cr; /* RCC clock control */
|
|
u32 pllcfgr; /* RCC PLL configuration */
|
|
u32 cfgr; /* RCC clock configuration */
|
|
u32 cir; /* RCC clock interrupt */
|
|
u32 ahb1rstr; /* RCC AHB1 peripheral reset */
|
|
u32 ahb2rstr; /* RCC AHB2 peripheral reset */
|
|
u32 ahb3rstr; /* RCC AHB3 peripheral reset */
|
|
u32 rsv0;
|
|
u32 apb1rstr; /* RCC APB1 peripheral reset */
|
|
u32 apb2rstr; /* RCC APB2 peripheral reset */
|
|
u32 rsv1[2];
|
|
u32 ahb1enr; /* RCC AHB1 peripheral clock enable */
|
|
u32 ahb2enr; /* RCC AHB2 peripheral clock enable */
|
|
u32 ahb3enr; /* RCC AHB3 peripheral clock enable */
|
|
u32 rsv2;
|
|
u32 apb1enr; /* RCC APB1 peripheral clock enable */
|
|
u32 apb2enr; /* RCC APB2 peripheral clock enable */
|
|
u32 rsv3[2];
|
|
u32 ahb1lpenr; /* RCC AHB1 periph clk enable in low pwr mode */
|
|
u32 ahb2lpenr; /* RCC AHB2 periph clk enable in low pwr mode */
|
|
u32 ahb3lpenr; /* RCC AHB3 periph clk enable in low pwr mode */
|
|
u32 rsv4;
|
|
u32 apb1lpenr; /* RCC APB1 periph clk enable in low pwr mode */
|
|
u32 apb2lpenr; /* RCC APB2 periph clk enable in low pwr mode */
|
|
u32 rsv5[2];
|
|
u32 bdcr; /* RCC Backup domain control */
|
|
u32 csr; /* RCC clock control & status */
|
|
u32 rsv6[2];
|
|
u32 sscgr; /* RCC spread spectrum clock generation */
|
|
u32 plli2scfgr; /* RCC PLLI2S configuration */
|
|
/* below registers are only available on STM32F46x and STM32F7 SoCs*/
|
|
u32 pllsaicfgr; /* PLLSAI configuration */
|
|
u32 dckcfgr; /* dedicated clocks configuration register */
|
|
/* Below registers are only available on STM32F7 SoCs */
|
|
u32 dckcfgr2; /* dedicated clocks configuration register */
|
|
};
|
|
|
|
#endif /* __STM32_RCC_H_ */
|