mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-21 02:33:07 +00:00
34255b92e6
Up to now we were able to read/write environment data from/to UBI volumes only indirectly by gluebi driver. This driver creates NAND MTD on top of UBI volumes, which is quite a workaroung for this use case. Add support for direct read/write UBI volumes in order to not use obsolete gluebi driver. Forward-ported from this patch: http://patchwork.ozlabs.org/patch/619305/ Original patch: Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Forward port: Signed-off-by: S. Lockwood-Childs <sjl@vctlabs.com>
38 lines
1.3 KiB
Text
38 lines
1.3 KiB
Text
# Configuration file for fw_(printenv/setenv) utility.
|
|
# Up to two entries are valid, in this case the redundant
|
|
# environment sector is assumed present.
|
|
# Notice, that the "Number of sectors" is not required on NOR and SPI-dataflash.
|
|
# Futhermore, if the Flash sector size is omitted, this value is assumed to
|
|
# be the same as the Environment size, which is valid for NOR and SPI-dataflash
|
|
# Device offset must be prefixed with 0x to be parsed as a hexadecimal value.
|
|
|
|
# NOR example
|
|
# MTD device name Device offset Env. size Flash sector size Number of sectors
|
|
/dev/mtd1 0x0000 0x4000 0x4000
|
|
/dev/mtd2 0x0000 0x4000 0x4000
|
|
|
|
# MTD SPI-dataflash example
|
|
# MTD device name Device offset Env. size Flash sector size Number of sectors
|
|
#/dev/mtd5 0x4200 0x4200
|
|
#/dev/mtd6 0x4200 0x4200
|
|
|
|
# NAND example
|
|
#/dev/mtd0 0x4000 0x4000 0x20000 2
|
|
|
|
# On a block device a negative offset is treated as a backwards offset from the
|
|
# end of the device/partition, rather than a forwards offset from the start.
|
|
|
|
# Block device example
|
|
#/dev/mmcblk0 0xc0000 0x20000
|
|
#/dev/mmcblk0 -0x20000 0x20000
|
|
|
|
# VFAT example
|
|
#/boot/uboot.env 0x0000 0x4000
|
|
|
|
# UBI volume
|
|
#/dev/ubi0_0 0x0 0x1f000 0x1f000
|
|
#/dev/ubi0_1 0x0 0x1f000 0x1f000
|
|
|
|
# UBI volume by name
|
|
#/dev/ubi0:env 0x0 0x1f000 0x1f000
|
|
#/dev/ubi0:env-redund 0x0 0x1f000 0x1f000
|