u-boot/drivers/pinctrl/nxp/pinctrl-mxs.c
Lukasz Majewski 0f66653310 pinctrl: mxs: Add support for i.MX2[38] mxs pinctrl driver
The code responsible for setting proper values in the MUX registers
(in the mxs_pinctrl_set_state()) has been ported from Linux kernel
- SHA1: 17bb763e7eaf tag v5.1.11 from linux-stable.

As the pinctrl node in the imx28.dtsi file has gpio pins nodes as subnodes,
it was necessary to use 'dm_scan_fdt_dev()' (as a .bind method) to also
make them 'visible' by the DM's "gpio_mxs" driver.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-19 14:57:14 +02:00

190 lines
4.1 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2019 DENX Software Engineering
* Lukasz Majewski, DENX Software Engineering, lukma@denx.de
*/
#include <common.h>
#include <linux/io.h>
#include <linux/err.h>
#include <dm.h>
#include <dm/pinctrl.h>
#include <dm/read.h>
#include "pinctrl-mxs.h"
DECLARE_GLOBAL_DATA_PTR;
struct mxs_pinctrl_priv {
void __iomem *base;
const struct mxs_regs *regs;
};
static unsigned long mxs_dt_node_to_map(struct udevice *conf)
{
unsigned long config = 0;
int ret;
u32 val;
ret = dev_read_u32(conf, "fsl,drive-strength", &val);
if (!ret)
config = val | MA_PRESENT;
ret = dev_read_u32(conf, "fsl,voltage", &val);
if (!ret)
config |= val << VOL_SHIFT | VOL_PRESENT;
ret = dev_read_u32(conf, "fsl,pull-up", &val);
if (!ret)
config |= val << PULL_SHIFT | PULL_PRESENT;
return config;
}
static int mxs_pinctrl_set_mux(struct udevice *dev, u32 val, int bank, int pin)
{
struct mxs_pinctrl_priv *iomux = dev_get_priv(dev);
int muxsel = MUXID_TO_MUXSEL(val), shift;
void __iomem *reg;
reg = iomux->base + iomux->regs->muxsel;
reg += bank * 0x20 + pin / 16 * 0x10;
shift = pin % 16 * 2;
mxs_pinctrl_rmwl(muxsel, 0x3, shift, reg);
debug(" mux %d,", muxsel);
return 0;
}
static int mxs_pinctrl_set_state(struct udevice *dev, struct udevice *conf)
{
struct mxs_pinctrl_priv *iomux = dev_get_priv(dev);
u32 *pin_data, val, ma, vol, pull;
int npins, size, i, ret;
unsigned long config;
debug("\n%s: set state: %s\n", __func__, conf->name);
size = dev_read_size(conf, "fsl,pinmux-ids");
if (size < 0)
return size;
if (!size || size % sizeof(int)) {
dev_err(dev, "Invalid fsl,pinmux-ids property in %s\n",
conf->name);
return -EINVAL;
}
npins = size / sizeof(int);
pin_data = devm_kzalloc(dev, size, 0);
if (!pin_data)
return -ENOMEM;
ret = dev_read_u32_array(conf, "fsl,pinmux-ids", pin_data, npins);
if (ret) {
dev_err(dev, "Error reading pin data.\n");
devm_kfree(dev, pin_data);
return -EINVAL;
}
config = mxs_dt_node_to_map(conf);
ma = CONFIG_TO_MA(config);
vol = CONFIG_TO_VOL(config);
pull = CONFIG_TO_PULL(config);
for (i = 0; i < npins; i++) {
int pinid, bank, pin, shift;
void __iomem *reg;
val = pin_data[i];
pinid = MUXID_TO_PINID(val);
bank = PINID_TO_BANK(pinid);
pin = PINID_TO_PIN(pinid);
debug("(val: 0x%x) pin %d,", val, pinid);
/* Setup pinmux */
mxs_pinctrl_set_mux(dev, val, bank, pin);
debug(" ma: %d, vol: %d, pull: %d\n", ma, vol, pull);
/* drive */
reg = iomux->base + iomux->regs->drive;
reg += bank * 0x40 + pin / 8 * 0x10;
/* mA */
if (config & MA_PRESENT) {
shift = pin % 8 * 4;
mxs_pinctrl_rmwl(ma, 0x3, shift, reg);
}
/* vol */
if (config & VOL_PRESENT) {
shift = pin % 8 * 4 + 2;
if (vol)
writel(1 << shift, reg + SET);
else
writel(1 << shift, reg + CLR);
}
/* pull */
if (config & PULL_PRESENT) {
reg = iomux->base + iomux->regs->pull;
reg += bank * 0x10;
shift = pin;
if (pull)
writel(1 << shift, reg + SET);
else
writel(1 << shift, reg + CLR);
}
}
devm_kfree(dev, pin_data);
return 0;
}
static struct pinctrl_ops mxs_pinctrl_ops = {
.set_state = mxs_pinctrl_set_state,
};
static int mxs_pinctrl_probe(struct udevice *dev)
{
struct mxs_pinctrl_priv *iomux = dev_get_priv(dev);
iomux->base = dev_read_addr_ptr(dev);
iomux->regs = (struct mxs_regs *)dev_get_driver_data(dev);
return 0;
}
static const struct mxs_regs imx23_regs = {
.muxsel = 0x100,
.drive = 0x200,
.pull = 0x400,
};
static const struct mxs_regs imx28_regs = {
.muxsel = 0x100,
.drive = 0x300,
.pull = 0x600,
};
static const struct udevice_id mxs_pinctrl_match[] = {
{ .compatible = "fsl,imx23-pinctrl", .data = (ulong)&imx23_regs },
{ .compatible = "fsl,imx28-pinctrl", .data = (ulong)&imx28_regs },
{ /* sentinel */ }
};
U_BOOT_DRIVER(mxs_pinctrl) = {
.name = "mxs-pinctrl",
.id = UCLASS_PINCTRL,
.of_match = of_match_ptr(mxs_pinctrl_match),
.probe = mxs_pinctrl_probe,
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
.bind = dm_scan_fdt_dev,
#endif
.priv_auto_alloc_size = sizeof(struct mxs_pinctrl_priv),
.ops = &mxs_pinctrl_ops,
};