u-boot/common/cmd_spi.c
Jon Loeliger 9025317883 common/: Remove lingering references to CFG_CMD_* symbols.
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
Those always evaluated TRUE, and thus were always compiled
even when IDE really wasn't defined/wanted.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10 11:02:44 -05:00

143 lines
3.5 KiB
C

/*
* (C) Copyright 2002
* Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* SPI Read/Write Utilities
*/
#include <common.h>
#include <command.h>
#include <spi.h>
#if defined(CONFIG_CMD_SPI)
/*-----------------------------------------------------------------------
* Definitions
*/
#ifndef MAX_SPI_BYTES
# define MAX_SPI_BYTES 32 /* Maximum number of bytes we can handle */
#endif
/*
* External table of chip select functions (see the appropriate board
* support for the actual definition of the table).
*/
extern spi_chipsel_type spi_chipsel[];
extern int spi_chipsel_cnt;
/*
* Values from last command.
*/
static int device;
static int bitlen;
static uchar dout[MAX_SPI_BYTES];
static uchar din[MAX_SPI_BYTES];
/*
* SPI read/write
*
* Syntax:
* spi {dev} {num_bits} {dout}
* {dev} is the device number for controlling chip select (see TBD)
* {num_bits} is the number of bits to send & receive (base 10)
* {dout} is a hexadecimal string of data to send
* The command prints out the hexadecimal string received via SPI.
*/
int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
char *cp = 0;
uchar tmp;
int j;
int rcode = 0;
/*
* We use the last specified parameters, unless new ones are
* entered.
*/
if ((flag & CMD_FLAG_REPEAT) == 0)
{
if (argc >= 2)
device = simple_strtoul(argv[1], NULL, 10);
if (argc >= 3)
bitlen = simple_strtoul(argv[2], NULL, 10);
if (argc >= 4) {
cp = argv[3];
for(j = 0; *cp; j++, cp++) {
tmp = *cp - '0';
if(tmp > 9)
tmp -= ('A' - '0') - 10;
if(tmp > 15)
tmp -= ('a' - 'A');
if(tmp > 15) {
printf("Hex conversion error on %c, giving up.\n", *cp);
return 1;
}
if((j % 2) == 0)
dout[j / 2] = (tmp << 4);
else
dout[j / 2] |= tmp;
}
}
}
if ((device < 0) || (device >= spi_chipsel_cnt)) {
printf("Invalid device %d, giving up.\n", device);
return 1;
}
if ((bitlen < 0) || (bitlen > (MAX_SPI_BYTES * 8))) {
printf("Invalid bitlen %d, giving up.\n", bitlen);
return 1;
}
debug ("spi_chipsel[%d] = %08X\n",
device, (uint)spi_chipsel[device]);
if(spi_xfer(spi_chipsel[device], bitlen, dout, din) != 0) {
printf("Error with the SPI transaction.\n");
rcode = 1;
} else {
cp = (char *)din;
for(j = 0; j < ((bitlen + 7) / 8); j++) {
printf("%02X", *cp++);
}
printf("\n");
}
return rcode;
}
/***************************************************/
U_BOOT_CMD(
sspi, 5, 1, do_spi,
"sspi - SPI utility commands\n",
"<device> <bit_len> <dout> - Send <bit_len> bits from <dout> out the SPI\n"
"<device> - Identifies the chip select of the device\n"
"<bit_len> - Number of bits to send (base 10)\n"
"<dout> - Hexadecimal string that gets sent\n"
);
#endif