mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
9c150102bc
The environment is the canonical storage location of the mac address, so we're killing off the global data location and moving everything to querying the env directly. Rather than have common ppc code call a board-specific function like load_sernum_ethaddr(), have each board call it in its own board-specific misc_init_r() function. The boards that get converted here are: - kup4k/kup4x - pcs440ep - tqm8xx Signed-off-by: Mike Frysinger <vapier@gentoo.org> CC: Ben Warren <biggerbadderben@gmail.com> CC: Stefan Roese <sr@denx.de>
646 lines
17 KiB
C
646 lines
17 KiB
C
/*
|
|
* (C) Copyright 2000-2008
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc8xx.h>
|
|
#ifdef CONFIG_PS2MULT
|
|
#include <ps2mult.h>
|
|
#endif
|
|
|
|
extern flash_info_t flash_info[]; /* FLASH chips info */
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static long int dram_size (long int, long int *, long int);
|
|
|
|
#define _NOT_USED_ 0xFFFFFFFF
|
|
|
|
/* UPM initialization table for SDRAM: 40, 50, 66 MHz CLKOUT @ CAS latency 2, tWR=2 */
|
|
const uint sdram_table[] =
|
|
{
|
|
/*
|
|
* Single Read. (Offset 0 in UPMA RAM)
|
|
*/
|
|
0x1F0DFC04, 0xEEAFBC04, 0x11AF7C04, 0xEFBAFC00,
|
|
0x1FF5FC47, /* last */
|
|
/*
|
|
* SDRAM Initialization (offset 5 in UPMA RAM)
|
|
*
|
|
* This is no UPM entry point. The following definition uses
|
|
* the remaining space to establish an initialization
|
|
* sequence, which is executed by a RUN command.
|
|
*
|
|
*/
|
|
0x1FF5FC34, 0xEFEABC34, 0x1FB57C35, /* last */
|
|
/*
|
|
* Burst Read. (Offset 8 in UPMA RAM)
|
|
*/
|
|
0x1F0DFC04, 0xEEAFBC04, 0x10AF7C04, 0xF0AFFC00,
|
|
0xF0AFFC00, 0xF1AFFC00, 0xEFBAFC00, 0x1FF5FC47, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Single Write. (Offset 18 in UPMA RAM)
|
|
*/
|
|
0x1F0DFC04, 0xEEABBC00, 0x11B77C04, 0xEFFAFC44,
|
|
0x1FF5FC47, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Burst Write. (Offset 20 in UPMA RAM)
|
|
*/
|
|
0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00,
|
|
0xF0AFFC00, 0xF0AFFC04, 0xE1BAFC44, 0x1FF5FC47, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Refresh (Offset 30 in UPMA RAM)
|
|
*/
|
|
0x1FFD7C84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
|
|
0xFFFFFC84, 0xFFFFFC07, /* last */
|
|
_NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Exception. (Offset 3c in UPMA RAM)
|
|
*/
|
|
0xFFFFFC07, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*
|
|
* Test TQ ID string (TQM8xx...)
|
|
* If present, check for "L" type (no second DRAM bank),
|
|
* otherwise "L" type is assumed as default.
|
|
*
|
|
* Set board_type to 'L' for "L" type, 'M' for "M" type, 0 else.
|
|
*/
|
|
|
|
int checkboard (void)
|
|
{
|
|
char *s = getenv ("serial#");
|
|
|
|
puts ("Board: ");
|
|
|
|
if (!s || strncmp (s, "TQM8", 4)) {
|
|
puts ("### No HW ID - assuming TQM8xxL\n");
|
|
return (0);
|
|
}
|
|
|
|
if ((*(s + 6) == 'L')) { /* a TQM8xxL type */
|
|
gd->board_type = 'L';
|
|
}
|
|
|
|
if ((*(s + 6) == 'M')) { /* a TQM8xxM type */
|
|
gd->board_type = 'M';
|
|
}
|
|
|
|
if ((*(s + 6) == 'D')) { /* a TQM885D type */
|
|
gd->board_type = 'D';
|
|
}
|
|
|
|
for (; *s; ++s) {
|
|
if (*s == ' ')
|
|
break;
|
|
putc (*s);
|
|
}
|
|
#ifdef CONFIG_VIRTLAB2
|
|
puts (" (Virtlab2)");
|
|
#endif
|
|
putc ('\n');
|
|
|
|
return (0);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
long int size8, size9, size10;
|
|
long int size_b0 = 0;
|
|
long int size_b1 = 0;
|
|
|
|
upmconfig (UPMA, (uint *) sdram_table,
|
|
sizeof (sdram_table) / sizeof (uint));
|
|
|
|
/*
|
|
* Preliminary prescaler for refresh (depends on number of
|
|
* banks): This value is selected for four cycles every 62.4 us
|
|
* with two SDRAM banks or four cycles every 31.2 us with one
|
|
* bank. It will be adjusted after memory sizing.
|
|
*/
|
|
memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
|
|
|
|
/*
|
|
* The following value is used as an address (i.e. opcode) for
|
|
* the LOAD MODE REGISTER COMMAND during SDRAM initialisation. If
|
|
* the port size is 32bit the SDRAM does NOT "see" the lower two
|
|
* address lines, i.e. mar=0x00000088 -> opcode=0x00000022 for
|
|
* MICRON SDRAMs:
|
|
* -> 0 00 010 0 010
|
|
* | | | | +- Burst Length = 4
|
|
* | | | +----- Burst Type = Sequential
|
|
* | | +------- CAS Latency = 2
|
|
* | +----------- Operating Mode = Standard
|
|
* +-------------- Write Burst Mode = Programmed Burst Length
|
|
*/
|
|
memctl->memc_mar = 0x00000088;
|
|
|
|
/*
|
|
* Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
|
|
* preliminary addresses - these have to be modified after the
|
|
* SDRAM size has been determined.
|
|
*/
|
|
memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
|
|
memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
|
|
|
|
#ifndef CONFIG_CAN_DRIVER
|
|
if ((board_type != 'L') &&
|
|
(board_type != 'M') &&
|
|
(board_type != 'D') ) { /* only one SDRAM bank on L, M and D modules */
|
|
memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
|
|
memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
|
|
}
|
|
#endif /* CONFIG_CAN_DRIVER */
|
|
|
|
memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
|
|
|
|
udelay (200);
|
|
|
|
/* perform SDRAM initializsation sequence */
|
|
|
|
memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */
|
|
udelay (1);
|
|
memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */
|
|
udelay (1);
|
|
|
|
#ifndef CONFIG_CAN_DRIVER
|
|
if ((board_type != 'L') &&
|
|
(board_type != 'M') &&
|
|
(board_type != 'D') ) { /* only one SDRAM bank on L, M and D modules */
|
|
memctl->memc_mcr = 0x80006105; /* SDRAM bank 1 */
|
|
udelay (1);
|
|
memctl->memc_mcr = 0x80006230; /* SDRAM bank 1 - execute twice */
|
|
udelay (1);
|
|
}
|
|
#endif /* CONFIG_CAN_DRIVER */
|
|
|
|
memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
|
|
|
|
udelay (1000);
|
|
|
|
/*
|
|
* Check Bank 0 Memory Size for re-configuration
|
|
*
|
|
* try 8 column mode
|
|
*/
|
|
size8 = dram_size (CONFIG_SYS_MAMR_8COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
|
|
debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size8 >> 20);
|
|
|
|
udelay (1000);
|
|
|
|
/*
|
|
* try 9 column mode
|
|
*/
|
|
size9 = dram_size (CONFIG_SYS_MAMR_9COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
|
|
debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size9 >> 20);
|
|
|
|
udelay(1000);
|
|
|
|
#if defined(CONFIG_SYS_MAMR_10COL)
|
|
/*
|
|
* try 10 column mode
|
|
*/
|
|
size10 = dram_size (CONFIG_SYS_MAMR_10COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
|
|
debug ("SDRAM Bank 0 in 10 column mode: %ld MB\n", size10 >> 20);
|
|
#else
|
|
size10 = 0;
|
|
#endif /* CONFIG_SYS_MAMR_10COL */
|
|
|
|
if ((size8 < size10) && (size9 < size10)) {
|
|
size_b0 = size10;
|
|
} else if ((size8 < size9) && (size10 < size9)) {
|
|
size_b0 = size9;
|
|
memctl->memc_mamr = CONFIG_SYS_MAMR_9COL;
|
|
udelay (500);
|
|
} else {
|
|
size_b0 = size8;
|
|
memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
|
|
udelay (500);
|
|
}
|
|
debug ("SDRAM Bank 0: %ld MB\n", size_b0 >> 20);
|
|
|
|
#ifndef CONFIG_CAN_DRIVER
|
|
if ((board_type != 'L') &&
|
|
(board_type != 'M') &&
|
|
(board_type != 'D') ) { /* only one SDRAM bank on L, M and D modules */
|
|
/*
|
|
* Check Bank 1 Memory Size
|
|
* use current column settings
|
|
* [9 column SDRAM may also be used in 8 column mode,
|
|
* but then only half the real size will be used.]
|
|
*/
|
|
size_b1 = dram_size (memctl->memc_mamr, (long int *)SDRAM_BASE3_PRELIM,
|
|
SDRAM_MAX_SIZE);
|
|
debug ("SDRAM Bank 1: %ld MB\n", size_b1 >> 20);
|
|
} else {
|
|
size_b1 = 0;
|
|
}
|
|
#endif /* CONFIG_CAN_DRIVER */
|
|
|
|
udelay (1000);
|
|
|
|
/*
|
|
* Adjust refresh rate depending on SDRAM type, both banks
|
|
* For types > 128 MBit leave it at the current (fast) rate
|
|
*/
|
|
if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
|
|
/* reduce to 15.6 us (62.4 us / quad) */
|
|
memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
|
|
udelay (1000);
|
|
}
|
|
|
|
/*
|
|
* Final mapping: map bigger bank first
|
|
*/
|
|
if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */
|
|
|
|
memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
|
|
memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
|
|
|
|
if (size_b0 > 0) {
|
|
/*
|
|
* Position Bank 0 immediately above Bank 1
|
|
*/
|
|
memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
|
|
memctl->memc_br2 = ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
|
|
+ size_b1;
|
|
} else {
|
|
unsigned long reg;
|
|
|
|
/*
|
|
* No bank 0
|
|
*
|
|
* invalidate bank
|
|
*/
|
|
memctl->memc_br2 = 0;
|
|
|
|
/* adjust refresh rate depending on SDRAM type, one bank */
|
|
reg = memctl->memc_mptpr;
|
|
reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
|
|
memctl->memc_mptpr = reg;
|
|
}
|
|
|
|
} else { /* SDRAM Bank 0 is bigger - map first */
|
|
|
|
memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
|
|
memctl->memc_br2 =
|
|
(CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
|
|
|
|
if (size_b1 > 0) {
|
|
/*
|
|
* Position Bank 1 immediately above Bank 0
|
|
*/
|
|
memctl->memc_or3 =
|
|
((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
|
|
memctl->memc_br3 =
|
|
((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
|
|
+ size_b0;
|
|
} else {
|
|
unsigned long reg;
|
|
|
|
#ifndef CONFIG_CAN_DRIVER
|
|
/*
|
|
* No bank 1
|
|
*
|
|
* invalidate bank
|
|
*/
|
|
memctl->memc_br3 = 0;
|
|
#endif /* CONFIG_CAN_DRIVER */
|
|
|
|
/* adjust refresh rate depending on SDRAM type, one bank */
|
|
reg = memctl->memc_mptpr;
|
|
reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
|
|
memctl->memc_mptpr = reg;
|
|
}
|
|
}
|
|
|
|
udelay (10000);
|
|
|
|
#ifdef CONFIG_CAN_DRIVER
|
|
/* UPM initialization for CAN @ CLKOUT <= 66 MHz */
|
|
|
|
/* Initialize OR3 / BR3 */
|
|
memctl->memc_or3 = CONFIG_SYS_OR3_CAN;
|
|
memctl->memc_br3 = CONFIG_SYS_BR3_CAN;
|
|
|
|
/* Initialize MBMR */
|
|
memctl->memc_mbmr = MBMR_GPL_B4DIS; /* GPL_B4 ouput line Disable */
|
|
|
|
/* Initialize UPMB for CAN: single read */
|
|
memctl->memc_mdr = 0xFFFFCC04;
|
|
memctl->memc_mcr = 0x0100 | UPMB;
|
|
|
|
memctl->memc_mdr = 0x0FFFD004;
|
|
memctl->memc_mcr = 0x0101 | UPMB;
|
|
|
|
memctl->memc_mdr = 0x0FFFC000;
|
|
memctl->memc_mcr = 0x0102 | UPMB;
|
|
|
|
memctl->memc_mdr = 0x3FFFC004;
|
|
memctl->memc_mcr = 0x0103 | UPMB;
|
|
|
|
memctl->memc_mdr = 0xFFFFDC07;
|
|
memctl->memc_mcr = 0x0104 | UPMB;
|
|
|
|
/* Initialize UPMB for CAN: single write */
|
|
memctl->memc_mdr = 0xFFFCCC04;
|
|
memctl->memc_mcr = 0x0118 | UPMB;
|
|
|
|
memctl->memc_mdr = 0xCFFCDC04;
|
|
memctl->memc_mcr = 0x0119 | UPMB;
|
|
|
|
memctl->memc_mdr = 0x3FFCC000;
|
|
memctl->memc_mcr = 0x011A | UPMB;
|
|
|
|
memctl->memc_mdr = 0xFFFCC004;
|
|
memctl->memc_mcr = 0x011B | UPMB;
|
|
|
|
memctl->memc_mdr = 0xFFFDC405;
|
|
memctl->memc_mcr = 0x011C | UPMB;
|
|
#endif /* CONFIG_CAN_DRIVER */
|
|
|
|
#ifdef CONFIG_ISP1362_USB
|
|
/* Initialize OR5 / BR5 */
|
|
memctl->memc_or5 = CONFIG_SYS_OR5_ISP1362;
|
|
memctl->memc_br5 = CONFIG_SYS_BR5_ISP1362;
|
|
#endif /* CONFIG_ISP1362_USB */
|
|
return (size_b0 + size_b1);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Check memory range for valid RAM. A simple memory test determines
|
|
* the actually available RAM size between addresses `base' and
|
|
* `base + maxsize'. Some (not all) hardware errors are detected:
|
|
* - short between address lines
|
|
* - short between data lines
|
|
*/
|
|
|
|
static long int dram_size (long int mamr_value, long int *base, long int maxsize)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
|
|
memctl->memc_mamr = mamr_value;
|
|
|
|
return (get_ram_size(base, maxsize));
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#ifdef CONFIG_PS2MULT
|
|
|
|
#ifdef CONFIG_HMI10
|
|
#define BASE_BAUD ( 1843200 / 16 )
|
|
struct serial_state rs_table[] = {
|
|
{ BASE_BAUD, 4, (void*)0xec140000 },
|
|
{ BASE_BAUD, 2, (void*)0xec150000 },
|
|
{ BASE_BAUD, 6, (void*)0xec160000 },
|
|
{ BASE_BAUD, 10, (void*)0xec170000 },
|
|
};
|
|
|
|
#ifdef CONFIG_BOARD_EARLY_INIT_R
|
|
int board_early_init_r (void)
|
|
{
|
|
ps2mult_early_init();
|
|
return (0);
|
|
}
|
|
#endif
|
|
#endif /* CONFIG_HMI10 */
|
|
|
|
#endif /* CONFIG_PS2MULT */
|
|
|
|
|
|
#ifdef CONFIG_MISC_INIT_R
|
|
extern void load_sernum_ethaddr(void);
|
|
int misc_init_r (void)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
|
|
load_sernum_ethaddr();
|
|
|
|
#ifdef CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ
|
|
int scy, trlx, flash_or_timing, clk_diff;
|
|
|
|
scy = (CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ & OR_SCY_MSK) >> 4;
|
|
if (CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ & OR_TRLX) {
|
|
trlx = OR_TRLX;
|
|
scy *= 2;
|
|
} else {
|
|
trlx = 0;
|
|
}
|
|
|
|
/*
|
|
* We assume that each 10MHz of bus clock require 1-clk SCY
|
|
* adjustment.
|
|
*/
|
|
clk_diff = (gd->bus_clk / 1000000) - 50;
|
|
|
|
/*
|
|
* We need proper rounding here. This is what the "+5" and "-5"
|
|
* are here for.
|
|
*/
|
|
if (clk_diff >= 0)
|
|
scy += (clk_diff + 5) / 10;
|
|
else
|
|
scy += (clk_diff - 5) / 10;
|
|
|
|
/*
|
|
* For bus frequencies above 50MHz, we want to use relaxed timing
|
|
* (OR_TRLX).
|
|
*/
|
|
if (gd->bus_clk >= 50000000)
|
|
trlx = OR_TRLX;
|
|
else
|
|
trlx = 0;
|
|
|
|
if (trlx)
|
|
scy /= 2;
|
|
|
|
if (scy > 0xf)
|
|
scy = 0xf;
|
|
if (scy < 1)
|
|
scy = 1;
|
|
|
|
flash_or_timing = (scy << 4) | trlx |
|
|
(CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ & ~(OR_TRLX | OR_SCY_MSK));
|
|
|
|
memctl->memc_or0 =
|
|
flash_or_timing | (-flash_info[0].size & OR_AM_MSK);
|
|
#else
|
|
memctl->memc_or0 =
|
|
CONFIG_SYS_OR_TIMING_FLASH | (-flash_info[0].size & OR_AM_MSK);
|
|
#endif
|
|
memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
|
|
|
|
debug ("## BR0: 0x%08x OR0: 0x%08x\n",
|
|
memctl->memc_br0, memctl->memc_or0);
|
|
|
|
if (flash_info[1].size) {
|
|
#ifdef CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ
|
|
memctl->memc_or1 = flash_or_timing |
|
|
(-flash_info[1].size & 0xFFFF8000);
|
|
#else
|
|
memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH |
|
|
(-flash_info[1].size & 0xFFFF8000);
|
|
#endif
|
|
memctl->memc_br1 =
|
|
((CONFIG_SYS_FLASH_BASE +
|
|
flash_info[0].
|
|
size) & BR_BA_MSK) | BR_MS_GPCM | BR_V;
|
|
|
|
debug ("## BR1: 0x%08x OR1: 0x%08x\n",
|
|
memctl->memc_br1, memctl->memc_or1);
|
|
} else {
|
|
memctl->memc_br1 = 0; /* invalidate bank */
|
|
|
|
debug ("## DISABLE BR1: 0x%08x OR1: 0x%08x\n",
|
|
memctl->memc_br1, memctl->memc_or1);
|
|
}
|
|
|
|
# ifdef CONFIG_IDE_LED
|
|
/* Configure PA15 as output port */
|
|
immap->im_ioport.iop_padir |= 0x0001;
|
|
immap->im_ioport.iop_paodr |= 0x0001;
|
|
immap->im_ioport.iop_papar &= ~0x0001;
|
|
immap->im_ioport.iop_padat &= ~0x0001; /* turn it off */
|
|
# endif
|
|
|
|
#ifdef CONFIG_NSCU
|
|
/* wake up ethernet module */
|
|
immap->im_ioport.iop_pcpar &= ~0x0004; /* GPIO pin */
|
|
immap->im_ioport.iop_pcdir |= 0x0004; /* output */
|
|
immap->im_ioport.iop_pcso &= ~0x0004; /* for clarity */
|
|
immap->im_ioport.iop_pcdat |= 0x0004; /* enable */
|
|
#endif /* CONFIG_NSCU */
|
|
|
|
return (0);
|
|
}
|
|
#endif /* CONFIG_MISC_INIT_R */
|
|
|
|
|
|
# ifdef CONFIG_IDE_LED
|
|
void ide_led (uchar led, uchar status)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
|
|
/* We have one led for both pcmcia slots */
|
|
if (status) { /* led on */
|
|
immap->im_ioport.iop_padat |= 0x0001;
|
|
} else {
|
|
immap->im_ioport.iop_padat &= ~0x0001;
|
|
}
|
|
}
|
|
# endif
|
|
|
|
#ifdef CONFIG_LCD_INFO
|
|
#include <lcd.h>
|
|
#include <version.h>
|
|
#include <timestamp.h>
|
|
|
|
void lcd_show_board_info(void)
|
|
{
|
|
char temp[32];
|
|
|
|
lcd_printf ("%s (%s - %s)\n", U_BOOT_VERSION, U_BOOT_DATE, U_BOOT_TIME);
|
|
lcd_printf ("(C) 2008 DENX Software Engineering GmbH\n");
|
|
lcd_printf (" Wolfgang DENK, wd@denx.de\n");
|
|
#ifdef CONFIG_LCD_INFO_BELOW_LOGO
|
|
lcd_printf ("MPC823 CPU at %s MHz\n",
|
|
strmhz(temp, gd->cpu_clk));
|
|
lcd_printf (" %ld MB RAM, %ld MB Flash\n",
|
|
gd->ram_size >> 20,
|
|
gd->bd->bi_flashsize >> 20 );
|
|
#else
|
|
/* leave one blank line */
|
|
lcd_printf ("\nMPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash\n",
|
|
strmhz(temp, gd->cpu_clk),
|
|
gd->ram_size >> 20,
|
|
gd->bd->bi_flashsize >> 20 );
|
|
#endif /* CONFIG_LCD_INFO_BELOW_LOGO */
|
|
}
|
|
#endif /* CONFIG_LCD_INFO */
|
|
|
|
/* ---------------------------------------------------------------------------- */
|
|
/* TK885D specific initializaion */
|
|
/* ---------------------------------------------------------------------------- */
|
|
#ifdef CONFIG_TK885D
|
|
#include <miiphy.h>
|
|
int last_stage_init(void)
|
|
{
|
|
const unsigned char phy[] = {CONFIG_FEC1_PHY, CONFIG_FEC2_PHY};
|
|
unsigned short reg;
|
|
int ret, i = 100;
|
|
char *s;
|
|
|
|
mii_init();
|
|
/* Without this delay 0xff is read from the UART buffer later in
|
|
* abortboot() and autoboot is aborted */
|
|
udelay(10000);
|
|
while (tstc() && i--)
|
|
(void)getc();
|
|
|
|
/* Check if auto-negotiation is prohibited */
|
|
s = getenv("phy_auto_nego");
|
|
|
|
if (!s || !strcmp(s, "on"))
|
|
/* Nothing to do - autonegotiation by default */
|
|
return 0;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
ret = miiphy_read("FEC ETHERNET", phy[i], PHY_BMCR, ®);
|
|
if (ret) {
|
|
printf("Cannot read BMCR on PHY %d\n", phy[i]);
|
|
return 0;
|
|
}
|
|
/* Auto-negotiation off, hard set full duplex, 100Mbps */
|
|
ret = miiphy_write("FEC ETHERNET", phy[i],
|
|
PHY_BMCR, (reg | PHY_BMCR_100MB |
|
|
PHY_BMCR_DPLX) & ~PHY_BMCR_AUTON);
|
|
if (ret) {
|
|
printf("Cannot write BMCR on PHY %d\n", phy[i]);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|