mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-06 05:04:26 +00:00
167efc2c7a
Sync rk3399 dts(i) files from v5.7-rc1 linux-next. Reason: To get updated PCIe nodes and properties on respective dts(i) files. Summary: - sync won't include new board dts(i) - sync will add required files used on respective dts(i) - rk3399-puma-u-boot.dtsi spiflash label changed to norflash - move puma.dtsi bios_enable into rk3399-puma-u-boot.dtsi - move legacy max-frequency of sdhci into rk3399-u-boot.dtsi - update cross-ec-[keyboard|sbs].dtsi path as per U-Boot - keep roc-rk3399-pc dc_12v changes to -u-boot.dtsi Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
823 lines
17 KiB
Text
823 lines
17 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Google Gru (and derivatives) board device tree source
|
|
*
|
|
* Copyright 2016-2017 Google, Inc
|
|
*/
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include "rk3399.dtsi"
|
|
#include "rk3399-op1-opp.dtsi"
|
|
|
|
/ {
|
|
chosen {
|
|
stdout-path = "serial2:115200n8";
|
|
};
|
|
|
|
/*
|
|
* Power Tree
|
|
*
|
|
* In general an attempt is made to include all rails called out by
|
|
* the schematic as long as those rails interact in some way with
|
|
* the AP. AKA:
|
|
* - Rails that only connect to the EC (or devices that the EC talks to)
|
|
* are not included.
|
|
* - Rails _are_ included if the rails go to the AP even if the AP
|
|
* doesn't currently care about them / they are always on. The idea
|
|
* here is that it makes it easier to map to the schematic or extend
|
|
* later.
|
|
*
|
|
* If two rails are substantially the same from the AP's point of
|
|
* view, though, we won't create a full fixed regulator. We'll just
|
|
* put the child rail as an alias of the parent rail. Sometimes rails
|
|
* look the same to the AP because one of these is true:
|
|
* - The EC controls the enable and the EC always enables a rail as
|
|
* long as the AP is running.
|
|
* - The rails are actually connected to each other by a jumper and
|
|
* the distinction is just there to add clarity/flexibility to the
|
|
* schematic.
|
|
*/
|
|
|
|
ppvar_sys: ppvar-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "ppvar_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pp1200_lpddr: pp1200-lpddr {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp1200_lpddr";
|
|
|
|
/* EC turns on w/ lpddr_pwr_en; always on for AP */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
vin-supply = <&ppvar_sys>;
|
|
};
|
|
|
|
pp1800: pp1800 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp1800";
|
|
|
|
/* Always on when ppvar_sys shows power good */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
vin-supply = <&ppvar_sys>;
|
|
};
|
|
|
|
pp3300: pp3300 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp3300";
|
|
|
|
/* Always on; plain and simple */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
vin-supply = <&ppvar_sys>;
|
|
};
|
|
|
|
pp5000: pp5000 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp5000";
|
|
|
|
/* EC turns on w/ pp5000_en; always on for AP */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
vin-supply = <&ppvar_sys>;
|
|
};
|
|
|
|
ppvar_bigcpu_pwm: ppvar-bigcpu-pwm {
|
|
compatible = "pwm-regulator";
|
|
regulator-name = "ppvar_bigcpu_pwm";
|
|
|
|
pwms = <&pwm1 0 3337 0>;
|
|
pwm-supply = <&ppvar_sys>;
|
|
pwm-dutycycle-range = <100 0>;
|
|
pwm-dutycycle-unit = <100>;
|
|
|
|
/* EC turns on w/ ap_core_en; always on for AP */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <800107>;
|
|
regulator-max-microvolt = <1302232>;
|
|
};
|
|
|
|
ppvar_bigcpu: ppvar-bigcpu {
|
|
compatible = "vctrl-regulator";
|
|
regulator-name = "ppvar_bigcpu";
|
|
|
|
regulator-min-microvolt = <800107>;
|
|
regulator-max-microvolt = <1302232>;
|
|
|
|
ctrl-supply = <&ppvar_bigcpu_pwm>;
|
|
ctrl-voltage-range = <800107 1302232>;
|
|
|
|
regulator-settling-time-up-us = <322>;
|
|
};
|
|
|
|
ppvar_litcpu_pwm: ppvar-litcpu-pwm {
|
|
compatible = "pwm-regulator";
|
|
regulator-name = "ppvar_litcpu_pwm";
|
|
|
|
pwms = <&pwm2 0 3337 0>;
|
|
pwm-supply = <&ppvar_sys>;
|
|
pwm-dutycycle-range = <100 0>;
|
|
pwm-dutycycle-unit = <100>;
|
|
|
|
/* EC turns on w/ ap_core_en; always on for AP */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <797743>;
|
|
regulator-max-microvolt = <1307837>;
|
|
};
|
|
|
|
ppvar_litcpu: ppvar-litcpu {
|
|
compatible = "vctrl-regulator";
|
|
regulator-name = "ppvar_litcpu";
|
|
|
|
regulator-min-microvolt = <797743>;
|
|
regulator-max-microvolt = <1307837>;
|
|
|
|
ctrl-supply = <&ppvar_litcpu_pwm>;
|
|
ctrl-voltage-range = <797743 1307837>;
|
|
|
|
regulator-settling-time-up-us = <384>;
|
|
};
|
|
|
|
ppvar_gpu_pwm: ppvar-gpu-pwm {
|
|
compatible = "pwm-regulator";
|
|
regulator-name = "ppvar_gpu_pwm";
|
|
|
|
pwms = <&pwm0 0 3337 0>;
|
|
pwm-supply = <&ppvar_sys>;
|
|
pwm-dutycycle-range = <100 0>;
|
|
pwm-dutycycle-unit = <100>;
|
|
|
|
/* EC turns on w/ ap_core_en; always on for AP */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <786384>;
|
|
regulator-max-microvolt = <1217747>;
|
|
};
|
|
|
|
ppvar_gpu: ppvar-gpu {
|
|
compatible = "vctrl-regulator";
|
|
regulator-name = "ppvar_gpu";
|
|
|
|
regulator-min-microvolt = <786384>;
|
|
regulator-max-microvolt = <1217747>;
|
|
|
|
ctrl-supply = <&ppvar_gpu_pwm>;
|
|
ctrl-voltage-range = <786384 1217747>;
|
|
|
|
regulator-settling-time-up-us = <390>;
|
|
};
|
|
|
|
/* EC turns on w/ pp900_ddrpll_en */
|
|
pp900_ddrpll: pp900-ap {
|
|
};
|
|
|
|
/* EC turns on w/ pp900_pll_en */
|
|
pp900_pll: pp900-ap {
|
|
};
|
|
|
|
/* EC turns on w/ pp900_pmu_en */
|
|
pp900_pmu: pp900-ap {
|
|
};
|
|
|
|
/* EC turns on w/ pp1800_s0_en_l */
|
|
pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: pp1800 {
|
|
};
|
|
|
|
/* EC turns on w/ pp1800_avdd_en_l */
|
|
pp1800_avdd: pp1800 {
|
|
};
|
|
|
|
/* EC turns on w/ pp1800_lid_en_l */
|
|
pp1800_lid: pp1800_mic: pp1800 {
|
|
};
|
|
|
|
/* EC turns on w/ lpddr_pwr_en */
|
|
pp1800_lpddr: pp1800 {
|
|
};
|
|
|
|
/* EC turns on w/ pp1800_pmu_en_l */
|
|
pp1800_pmu: pp1800 {
|
|
};
|
|
|
|
/* EC turns on w/ pp1800_usb_en_l */
|
|
pp1800_usb: pp1800 {
|
|
};
|
|
|
|
pp3000_sd_slot: pp3000-sd-slot {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp3000_sd_slot";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd_slot_pwr_en>;
|
|
|
|
enable-active-high;
|
|
gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
|
|
|
|
vin-supply = <&pp3000>;
|
|
};
|
|
|
|
/*
|
|
* Technically, this is a small abuse of 'regulator-gpio'; this
|
|
* regulator is a mux between pp1800 and pp3300. pp1800 and pp3300 are
|
|
* always on though, so it is sufficient to simply control the mux
|
|
* here.
|
|
*/
|
|
ppvar_sd_card_io: ppvar-sd-card-io {
|
|
compatible = "regulator-gpio";
|
|
regulator-name = "ppvar_sd_card_io";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd_io_pwr_en &sd_pwr_1800_sel>;
|
|
|
|
enable-active-high;
|
|
enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
|
|
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
|
|
states = <1800000 0x1
|
|
3000000 0x0>;
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
/* EC turns on w/ pp3300_trackpad_en_l */
|
|
pp3300_trackpad: pp3300-trackpad {
|
|
};
|
|
|
|
/* EC turns on w/ usb_a_en */
|
|
pp5000_usb_a_vbus: pp5000 {
|
|
};
|
|
|
|
ap_rtc_clk: ap-rtc-clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "xin32k";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
max98357a: max98357a {
|
|
compatible = "maxim,max98357a";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmode_en>;
|
|
sdmode-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
|
|
sdmode-delay = <2>;
|
|
#sound-dai-cells = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
sound: sound {
|
|
compatible = "rockchip,rk3399-gru-sound";
|
|
rockchip,cpu = <&i2s0 &i2s2>;
|
|
};
|
|
};
|
|
|
|
&cdn_dp {
|
|
status = "okay";
|
|
};
|
|
|
|
/*
|
|
* Set some suspend operating points to avoid OVP in suspend
|
|
*
|
|
* When we go into S3 ARM Trusted Firmware will transition our PWM regulators
|
|
* from wherever they're at back to the "default" operating point (whatever
|
|
* voltage we get when we set the PWM pins to "input").
|
|
*
|
|
* This quick transition under light load has the possibility to trigger the
|
|
* regulator "over voltage protection" (OVP).
|
|
*
|
|
* To make extra certain that we don't hit this OVP at suspend time, we'll
|
|
* transition to a voltage that's much closer to the default (~1.0 V) so that
|
|
* there will not be a big jump. Technically we only need to get within 200 mV
|
|
* of the default voltage, but the speed here should be fast enough and we need
|
|
* suspend/resume to be rock solid.
|
|
*/
|
|
|
|
&cluster0_opp {
|
|
opp05 {
|
|
opp-suspend;
|
|
};
|
|
};
|
|
|
|
&cluster1_opp {
|
|
opp06 {
|
|
opp-suspend;
|
|
};
|
|
};
|
|
|
|
&cpu_l0 {
|
|
cpu-supply = <&ppvar_litcpu>;
|
|
};
|
|
|
|
&cpu_l1 {
|
|
cpu-supply = <&ppvar_litcpu>;
|
|
};
|
|
|
|
&cpu_l2 {
|
|
cpu-supply = <&ppvar_litcpu>;
|
|
};
|
|
|
|
&cpu_l3 {
|
|
cpu-supply = <&ppvar_litcpu>;
|
|
};
|
|
|
|
&cpu_b0 {
|
|
cpu-supply = <&ppvar_bigcpu>;
|
|
};
|
|
|
|
&cpu_b1 {
|
|
cpu-supply = <&ppvar_bigcpu>;
|
|
};
|
|
|
|
&cru {
|
|
assigned-clocks =
|
|
<&cru PLL_GPLL>, <&cru PLL_CPLL>,
|
|
<&cru PLL_NPLL>,
|
|
<&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
|
|
<&cru PCLK_PERIHP>,
|
|
<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
|
|
<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
|
|
<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
|
|
<&cru ACLK_VIO>, <&cru ACLK_HDCP>,
|
|
<&cru ACLK_GIC_PRE>,
|
|
<&cru PCLK_DDR>;
|
|
assigned-clock-rates =
|
|
<600000000>, <800000000>,
|
|
<1000000000>,
|
|
<150000000>, <75000000>,
|
|
<37500000>,
|
|
<100000000>, <100000000>,
|
|
<50000000>, <800000000>,
|
|
<100000000>, <50000000>,
|
|
<400000000>, <400000000>,
|
|
<200000000>,
|
|
<200000000>;
|
|
};
|
|
|
|
&emmc_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&ppvar_gpu>;
|
|
status = "okay";
|
|
};
|
|
|
|
ap_i2c_ts: &i2c3 {
|
|
status = "okay";
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
/* These are relatively safe rise/fall times */
|
|
i2c-scl-falling-time-ns = <50>;
|
|
i2c-scl-rising-time-ns = <300>;
|
|
};
|
|
|
|
ap_i2c_audio: &i2c8 {
|
|
status = "okay";
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
/* These are relatively safe rise/fall times */
|
|
i2c-scl-falling-time-ns = <50>;
|
|
i2c-scl-rising-time-ns = <300>;
|
|
|
|
codec: da7219@1a {
|
|
compatible = "dlg,da7219";
|
|
reg = <0x1a>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&cru SCLK_I2S_8CH_OUT>;
|
|
clock-names = "mclk";
|
|
dlg,micbias-lvl = <2600>;
|
|
dlg,mic-amp-in-sel = "diff";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&headset_int_l>;
|
|
VDD-supply = <&pp1800>;
|
|
VDDMIC-supply = <&pp3300>;
|
|
VDDIO-supply = <&pp1800>;
|
|
|
|
da7219_aad {
|
|
dlg,adc-1bit-rpt = <1>;
|
|
dlg,btn-avg = <4>;
|
|
dlg,btn-cfg = <50>;
|
|
dlg,mic-det-thr = <500>;
|
|
dlg,jack-ins-deb = <20>;
|
|
dlg,jack-det-rate = "32ms_64ms";
|
|
dlg,jack-rem-deb = <1>;
|
|
|
|
dlg,a-d-btn-thr = <0xa>;
|
|
dlg,d-b-btn-thr = <0x16>;
|
|
dlg,b-c-btn-thr = <0x21>;
|
|
dlg,c-mic-btn-thr = <0x3E>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2s0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2s2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&io_domains {
|
|
status = "okay";
|
|
|
|
audio-supply = <&pp1800_audio>; /* APIO5_VDD; 3d 4a */
|
|
bt656-supply = <&pp1800_ap_io>; /* APIO2_VDD; 2a 2b */
|
|
gpio1830-supply = <&pp3000_ap>; /* APIO4_VDD; 4c 4d */
|
|
sdmmc-supply = <&ppvar_sd_card_io>; /* SDMMC0_VDD; 4b */
|
|
};
|
|
|
|
&pcie0 {
|
|
status = "okay";
|
|
|
|
ep-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_clkreqn_cpm>, <&wifi_perst_l>;
|
|
vpcie3v3-supply = <&pp3300_wifi_bt>;
|
|
vpcie1v8-supply = <&wlan_pd_n>; /* HACK: see &wlan_pd_n */
|
|
vpcie0v9-supply = <&pp900_pcie>;
|
|
|
|
pci_rootport: pcie@0,0 {
|
|
reg = <0x83000000 0x0 0x00000000 0x0 0x00000000>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
};
|
|
};
|
|
|
|
&pcie_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&pmu_io_domains {
|
|
status = "okay";
|
|
|
|
pmu1830-supply = <&pp1800_pmu>; /* PMUIO2_VDD */
|
|
};
|
|
|
|
&pwm0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci {
|
|
/*
|
|
* Signal integrity isn't great at 200 MHz and 150 MHz (DDR) gives the
|
|
* same (or nearly the same) performance for all eMMC that are intended
|
|
* to be used.
|
|
*/
|
|
assigned-clock-rates = <150000000>;
|
|
|
|
bus-width = <8>;
|
|
mmc-hs400-1_8v;
|
|
mmc-hs400-enhanced-strobe;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc {
|
|
status = "okay";
|
|
|
|
/*
|
|
* Note: configure "sdmmc_cd" as card detect even though it's actually
|
|
* hooked to ground. Because we specified "cd-gpios" below dw_mmc
|
|
* should be ignoring card detect anyway. Specifying the pin as
|
|
* sdmmc_cd means that even if you've got GRF_SOC_CON7[12] (force_jtag)
|
|
* turned on that the system will still make sure the port is
|
|
* configured as SDMMC and not JTAG.
|
|
*/
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_gpio
|
|
&sdmmc_bus4>;
|
|
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
cd-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
|
|
disable-wp;
|
|
sd-uhs-sdr12;
|
|
sd-uhs-sdr25;
|
|
sd-uhs-sdr50;
|
|
sd-uhs-sdr104;
|
|
vmmc-supply = <&pp3000_sd_slot>;
|
|
vqmmc-supply = <&ppvar_sd_card_io>;
|
|
};
|
|
|
|
&spi1 {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-1 = <&spi1_sleep>;
|
|
|
|
spiflash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
|
|
/* May run faster once verified. */
|
|
spi-max-frequency = <10000000>;
|
|
};
|
|
};
|
|
|
|
&spi2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&spi5 {
|
|
status = "okay";
|
|
|
|
cros_ec: ec@0 {
|
|
compatible = "google,cros-ec-spi";
|
|
reg = <0>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ec_ap_int_l>;
|
|
spi-max-frequency = <3000000>;
|
|
|
|
i2c_tunnel: i2c-tunnel {
|
|
compatible = "google,cros-ec-i2c-tunnel";
|
|
google,remote-bus = <4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
usbc_extcon0: extcon0 {
|
|
compatible = "google,extcon-usbc-cros-ec";
|
|
google,usb-port-id = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&tsadc {
|
|
status = "okay";
|
|
|
|
rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
|
|
rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
|
|
};
|
|
|
|
&tcphy0 {
|
|
status = "okay";
|
|
extcon = <&usbc_extcon0>;
|
|
};
|
|
|
|
&u2phy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy0_host {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy1_host {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy0_otg {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy1_otg {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd3_0 {
|
|
status = "okay";
|
|
extcon = <&usbc_extcon0>;
|
|
};
|
|
|
|
&usbdrd_dwc3_0 {
|
|
status = "okay";
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&vopb {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopb_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopl {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopl_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
#include <cros-ec-keyboard.dtsi>
|
|
#include <cros-ec-sbs.dtsi>
|
|
|
|
&pinctrl {
|
|
/*
|
|
* pinctrl settings for pins that have no real owners.
|
|
*
|
|
* At the moment settings are identical for S0 and S3, but if we later
|
|
* need to configure things differently for S3 we'll adjust here.
|
|
*/
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <
|
|
&ap_pwroff /* AP will auto-assert this when in S3 */
|
|
&clk_32k /* This pin is always 32k on gru boards */
|
|
>;
|
|
|
|
pcfg_output_low: pcfg-output-low {
|
|
output-low;
|
|
};
|
|
|
|
pcfg_output_high: pcfg-output-high {
|
|
output-high;
|
|
};
|
|
|
|
pcfg_pull_none_8ma: pcfg-pull-none-8ma {
|
|
bias-disable;
|
|
drive-strength = <8>;
|
|
};
|
|
|
|
backlight-enable {
|
|
bl_en: bl-en {
|
|
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
cros-ec {
|
|
ec_ap_int_l: ec-ap-int-l {
|
|
rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
discrete-regulators {
|
|
sd_io_pwr_en: sd-io-pwr-en {
|
|
rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO
|
|
&pcfg_pull_none>;
|
|
};
|
|
|
|
sd_pwr_1800_sel: sd-pwr-1800-sel {
|
|
rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO
|
|
&pcfg_pull_none>;
|
|
};
|
|
|
|
sd_slot_pwr_en: sd-slot-pwr-en {
|
|
rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO
|
|
&pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
codec {
|
|
/* Has external pullup */
|
|
headset_int_l: headset-int-l {
|
|
rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
mic_int: mic-int {
|
|
rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
max98357a {
|
|
sdmode_en: sdmode-en {
|
|
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
pcie {
|
|
pcie_clkreqn_cpm: pci-clkreqn-cpm {
|
|
/*
|
|
* Since our pcie doesn't support ClockPM(CPM), we want
|
|
* to hack this as gpio, so the EP could be able to
|
|
* de-assert it along and make ClockPM(CPM) work.
|
|
*/
|
|
rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
sdmmc {
|
|
/*
|
|
* We run sdmmc at max speed; bump up drive strength.
|
|
* We also have external pulls, so disable the internal ones.
|
|
*/
|
|
sdmmc_bus4: sdmmc-bus4 {
|
|
rockchip,pins =
|
|
<4 RK_PB0 1 &pcfg_pull_none_8ma>,
|
|
<4 RK_PB1 1 &pcfg_pull_none_8ma>,
|
|
<4 RK_PB2 1 &pcfg_pull_none_8ma>,
|
|
<4 RK_PB3 1 &pcfg_pull_none_8ma>;
|
|
};
|
|
|
|
sdmmc_clk: sdmmc-clk {
|
|
rockchip,pins =
|
|
<4 RK_PB4 1 &pcfg_pull_none_8ma>;
|
|
};
|
|
|
|
sdmmc_cmd: sdmmc-cmd {
|
|
rockchip,pins =
|
|
<4 RK_PB5 1 &pcfg_pull_none_8ma>;
|
|
};
|
|
|
|
/*
|
|
* In our case the official card detect is hooked to ground
|
|
* to avoid getting access to JTAG just by sticking something
|
|
* in the SD card slot (see the force_jtag bit in the TRM).
|
|
*
|
|
* We still configure it as card detect because it doesn't
|
|
* hurt and dw_mmc will ignore it. We make sure to disable
|
|
* the pull though so we don't burn needless power.
|
|
*/
|
|
sdmmc_cd: sdmmc-cd {
|
|
rockchip,pins =
|
|
<0 RK_PA7 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
/* This is where we actually hook up CD; has external pull */
|
|
sdmmc_cd_gpio: sdmmc-cd-gpio {
|
|
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
spi1 {
|
|
spi1_sleep: spi1-sleep {
|
|
/*
|
|
* Pull down SPI1 CLK/CS/RX/TX during suspend, to
|
|
* prevent leakage.
|
|
*/
|
|
rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>,
|
|
<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>,
|
|
<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>,
|
|
<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
touchscreen {
|
|
touch_int_l: touch-int-l {
|
|
rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
touch_reset_l: touch-reset-l {
|
|
rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
trackpad {
|
|
ap_i2c_tp_pu_en: ap-i2c-tp-pu-en {
|
|
rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>;
|
|
};
|
|
|
|
trackpad_int_l: trackpad-int-l {
|
|
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
wifi: wifi {
|
|
wlan_module_reset_l: wlan-module-reset-l {
|
|
rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
bt_host_wake_l: bt-host-wake-l {
|
|
/* Kevin has an external pull up, but Gru does not */
|
|
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
write-protect {
|
|
ap_fw_wp: ap-fw-wp {
|
|
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
};
|