mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-06 05:04:26 +00:00
d239d9d946
Support pinctrl/clk/sdhc, include ddr4 timing data. Log: U-Boot SPL 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800) Normal Boot Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800) CPU: Freescale i.MX8MNano rev1.0 at 24 MHz Reset cause: POR Model: NXP i.MX8MNano DDR4 EVK board DRAM: 2 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
508 lines
12 KiB
Text
508 lines
12 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright 2019 NXP
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/usb/pd.h>
|
|
#include "imx8mm.dtsi"
|
|
|
|
/ {
|
|
model = "FSL i.MX8MM EVK board";
|
|
compatible = "fsl,imx8mm-evk", "fsl,imx8mm";
|
|
|
|
chosen {
|
|
stdout-path = &uart2;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpio_led>;
|
|
|
|
status {
|
|
label = "status";
|
|
gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
};
|
|
|
|
reg_usdhc2_vmmc: regulator-usdhc2 {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
|
|
regulator-name = "VSD_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
wm8524: audio-codec {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "wlf,wm8524";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpio_wlf>;
|
|
wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
sound-wm8524 {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "wm8524-audio";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,frame-master = <&cpudai>;
|
|
simple-audio-card,bitclock-master = <&cpudai>;
|
|
simple-audio-card,widgets =
|
|
"Line", "Left Line Out Jack",
|
|
"Line", "Right Line Out Jack";
|
|
simple-audio-card,routing =
|
|
"Left Line Out Jack", "LINEVOUTL",
|
|
"Right Line Out Jack", "LINEVOUTR";
|
|
|
|
cpudai: simple-audio-card,cpu {
|
|
sound-dai = <&sai3>;
|
|
};
|
|
|
|
simple-audio-card,codec {
|
|
sound-dai = <&wm8524>;
|
|
clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&A53_0 {
|
|
cpu-supply = <&buck2_reg>;
|
|
};
|
|
|
|
&fec1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec1>;
|
|
phy-mode = "rgmii-id";
|
|
phy-handle = <ðphy0>;
|
|
fsl,magic-packet;
|
|
status = "okay";
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy0: ethernet-phy@0 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
pmic@4b {
|
|
compatible = "rohm,bd71847";
|
|
reg = <0x4b>;
|
|
pinctrl-0 = <&pinctrl_pmic>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <3 GPIO_ACTIVE_LOW>;
|
|
rohm,reset-snvs-powered;
|
|
|
|
regulators {
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "BUCK1";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <1250>;
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "BUCK2";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <1250>;
|
|
rohm,dvs-run-voltage = <1000000>;
|
|
rohm,dvs-idle-voltage = <900000>;
|
|
};
|
|
|
|
buck3_reg: BUCK3 {
|
|
// BUCK5 in datasheet
|
|
regulator-name = "BUCK3";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
// BUCK6 in datasheet
|
|
regulator-name = "BUCK4";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck5_reg: BUCK5 {
|
|
// BUCK7 in datasheet
|
|
regulator-name = "BUCK5";
|
|
regulator-min-microvolt = <1605000>;
|
|
regulator-max-microvolt = <1995000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck6_reg: BUCK6 {
|
|
// BUCK8 in datasheet
|
|
regulator-name = "BUCK6";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "LDO1";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo2_reg: LDO2 {
|
|
regulator-name = "LDO2";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "LDO3";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo4_reg: LDO4 {
|
|
regulator-name = "LDO4";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo6_reg: LDO6 {
|
|
regulator-name = "LDO6";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
status = "okay";
|
|
|
|
ptn5110: tcpc@50 {
|
|
compatible = "nxp,ptn5110";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_typec1>;
|
|
reg = <0x50>;
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <11 8>;
|
|
status = "okay";
|
|
|
|
port {
|
|
typec1_dr_sw: endpoint {
|
|
remote-endpoint = <&usb1_drd_sw>;
|
|
};
|
|
};
|
|
|
|
typec1_con: connector {
|
|
compatible = "usb-c-connector";
|
|
label = "USB-C";
|
|
power-role = "dual";
|
|
data-role = "dual";
|
|
try-power-role = "sink";
|
|
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
|
sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
|
|
PDO_VAR(5000, 20000, 3000)>;
|
|
op-sink-microwatt = <15000000>;
|
|
self-powered;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
status = "okay";
|
|
|
|
pca6416: gpio@20 {
|
|
compatible = "ti,tca6416";
|
|
reg = <0x20>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
|
|
&sai3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sai3>;
|
|
assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
|
|
assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
|
|
assigned-clock-rates = <24576000>;
|
|
status = "okay";
|
|
};
|
|
|
|
&snvs_pwrkey {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 { /* console */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg1 {
|
|
dr_mode = "otg";
|
|
hnp-disable;
|
|
srp-disable;
|
|
adp-disable;
|
|
usb-role-switch;
|
|
status = "okay";
|
|
|
|
port {
|
|
usb1_drd_sw: endpoint {
|
|
remote-endpoint = <&typec1_dr_sw>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usdhc2 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
|
|
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
|
|
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
|
|
cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
|
bus-width = <4>;
|
|
vmmc-supply = <®_usdhc2_vmmc>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc3 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&wdog1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_wdog>;
|
|
fsl,ext-reset-output;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl_fec1: fec1grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
|
|
MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
|
|
MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
|
|
MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
|
|
MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
|
|
MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
|
|
MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
|
|
MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
|
|
MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
|
|
MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
|
|
MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
|
|
MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
|
|
MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
|
|
MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
|
|
MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpio_led: gpioledgrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpio_wlf: gpiowlfgrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
|
|
MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
|
|
MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c3: i2c3grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
|
|
MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
|
|
>;
|
|
};
|
|
|
|
pinctrl_pmic: pmicirq {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
|
|
>;
|
|
};
|
|
|
|
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
|
|
>;
|
|
};
|
|
|
|
pinctrl_sai3: sai3grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
|
|
MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
|
|
MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
|
|
MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
|
|
>;
|
|
};
|
|
|
|
pinctrl_typec1: typec1grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
|
|
MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_gpio: usdhc2grpgpio {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
|
|
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
|
|
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
|
|
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
|
|
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
|
|
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
|
|
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
|
|
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
|
|
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
|
|
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
|
|
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
|
|
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
|
|
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
|
|
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
|
|
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
|
|
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
|
|
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
|
|
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
|
|
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
|
|
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
|
|
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
|
|
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
|
|
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
|
|
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
|
|
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
|
|
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
|
|
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
|
|
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
|
|
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
|
|
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
|
|
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
|
|
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
|
|
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
|
|
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
|
|
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
|
|
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
|
|
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
|
|
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
|
|
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
|
|
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
|
|
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
|
|
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
|
|
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
|
|
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
|
|
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
|
|
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
|
|
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
|
|
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
|
|
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
|
|
>;
|
|
};
|
|
|
|
pinctrl_wdog: wdoggrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
|
|
>;
|
|
};
|
|
};
|