Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-07 05:34:28 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/mach-at91/armv7/clock.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

296 lines
6.6 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* [origin: Linux kernel linux/arch/arm/mach-at91/clock.c]
*
* Copyright (C) 2005 David Brownell
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Copyright (C) 2013 Bo Shen <voice.shen@atmel.com>
* Copyright (C) 2015 Wenyou Yang <wenyou.yang@atmel.com>
*/
#include <common.h>
#include <linux/errno.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/clk.h>
#if !defined(CONFIG_AT91FAMILY)
# error You need to define CONFIG_AT91FAMILY in your board config!
#endif
DECLARE_GLOBAL_DATA_PTR;
static unsigned long at91_css_to_rate(unsigned long css)
{
switch (css) {
case AT91_PMC_MCKR_CSS_SLOW:
return CONFIG_SYS_AT91_SLOW_CLOCK;
case AT91_PMC_MCKR_CSS_MAIN:
return gd->arch.main_clk_rate_hz;
case AT91_PMC_MCKR_CSS_PLLA:
return gd->arch.plla_rate_hz;
}
return 0;
}
static u32 at91_pll_rate(u32 freq, u32 reg)
{
unsigned mul, div;
div = reg & 0xff;
mul = (reg >> 18) & 0x7f;
if (div && mul) {
freq /= div;
freq *= mul + 1;
} else {
freq = 0;
}
return freq;
}
int at91_clock_init(unsigned long main_clock)
{
unsigned freq, mckr;
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
unsigned tmp;
/*
* When the bootloader initialized the main oscillator correctly,
* there's no problem using the cycle counter. But if it didn't,
* or when using oscillator bypass mode, we must be told the speed
* of the main clock.
*/
if (!main_clock) {
do {
tmp = readl(&pmc->mcfr);
} while (!(tmp & AT91_PMC_MCFR_MAINRDY));
tmp &= AT91_PMC_MCFR_MAINF_MASK;
main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16);
}
#endif
gd->arch.main_clk_rate_hz = main_clock;
/* report if PLLA is more than mildly overclocked */
gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
/*
* MCK and CPU derive from one of those primary clocks.
* For now, assume this parentage won't change.
*/
mckr = readl(&pmc->mckr);
/* plla divisor by 2 */
if (mckr & (1 << 12))
gd->arch.plla_rate_hz >>= 1;
gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
freq = gd->arch.mck_rate_hz;
/* prescale */
freq >>= mckr & AT91_PMC_MCKR_PRES_MASK;
switch (mckr & AT91_PMC_MCKR_MDIV_MASK) {
case AT91_PMC_MCKR_MDIV_2:
gd->arch.mck_rate_hz = freq / 2;
break;
case AT91_PMC_MCKR_MDIV_3:
gd->arch.mck_rate_hz = freq / 3;
break;
case AT91_PMC_MCKR_MDIV_4:
gd->arch.mck_rate_hz = freq / 4;
break;
default:
break;
}
gd->arch.cpu_clk_rate_hz = freq;
return 0;
}
void at91_plla_init(u32 pllar)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
writel(pllar, &pmc->pllar);
while (!(readl(&pmc->sr) & (AT91_PMC_LOCKA | AT91_PMC_MCKRDY)))
;
}
void at91_mck_init(u32 mckr)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
u32 tmp;
tmp = readl(&pmc->mckr);
tmp &= ~(AT91_PMC_MCKR_CSS_MASK |
AT91_PMC_MCKR_PRES_MASK |
AT91_PMC_MCKR_MDIV_MASK |
AT91_PMC_MCKR_PLLADIV_2);
#ifdef CPU_HAS_H32MXDIV
tmp &= ~AT91_PMC_MCKR_H32MXDIV;
#endif
tmp |= mckr & (AT91_PMC_MCKR_CSS_MASK |
AT91_PMC_MCKR_PRES_MASK |
AT91_PMC_MCKR_MDIV_MASK |
AT91_PMC_MCKR_PLLADIV_2);
#ifdef CPU_HAS_H32MXDIV
tmp |= mckr & AT91_PMC_MCKR_H32MXDIV;
#endif
writel(tmp, &pmc->mckr);
while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
;
}
/*
* For the Master Clock Controller Register(MCKR), while switching
* to a lower clock source, we must switch the clock source first
* instead of last. Otherwise, we could end up with too high frequency
* on the internal bus and peripherals.
*/
void at91_mck_init_down(u32 mckr)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
u32 tmp;
tmp = readl(&pmc->mckr);
tmp &= (~AT91_PMC_MCKR_CSS_MASK);
tmp |= (mckr & AT91_PMC_MCKR_CSS_MASK);
writel(tmp, &pmc->mckr);
while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
;
#ifdef CPU_HAS_H32MXDIV
tmp = readl(&pmc->mckr);
tmp &= (~AT91_PMC_MCKR_H32MXDIV);
tmp |= (mckr & AT91_PMC_MCKR_H32MXDIV);
writel(tmp, &pmc->mckr);
#endif
tmp = readl(&pmc->mckr);
tmp &= (~AT91_PMC_MCKR_PLLADIV_MASK);
tmp |= (mckr & AT91_PMC_MCKR_PLLADIV_MASK);
writel(tmp, &pmc->mckr);
tmp = readl(&pmc->mckr);
tmp &= (~AT91_PMC_MCKR_MDIV_MASK);
tmp |= (mckr & AT91_PMC_MCKR_MDIV_MASK);
writel(tmp, &pmc->mckr);
tmp = readl(&pmc->mckr);
tmp &= (~AT91_PMC_MCKR_PRES_MASK);
tmp |= (mckr & AT91_PMC_MCKR_PRES_MASK);
writel(tmp, &pmc->mckr);
}
int at91_enable_periph_generated_clk(u32 id, u32 clk_source, u32 div)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
u32 regval, status;
u32 timeout = 1000;
if (id > AT91_PMC_PCR_PID_MASK)
return -EINVAL;
if (div > 0xff)
return -EINVAL;
if (clk_source == GCK_CSS_UPLL_CLK) {
if (at91_upll_clk_enable())
return -ENODEV;
}
writel(id, &pmc->pcr);
regval = readl(&pmc->pcr);
regval &= ~AT91_PMC_PCR_GCKCSS;
regval &= ~AT91_PMC_PCR_GCKDIV;
switch (clk_source) {
case GCK_CSS_SLOW_CLK:
regval |= AT91_PMC_PCR_GCKCSS_SLOW_CLK;
break;
case GCK_CSS_MAIN_CLK:
regval |= AT91_PMC_PCR_GCKCSS_MAIN_CLK;
break;
case GCK_CSS_PLLA_CLK:
regval |= AT91_PMC_PCR_GCKCSS_PLLA_CLK;
break;
case GCK_CSS_UPLL_CLK:
regval |= AT91_PMC_PCR_GCKCSS_UPLL_CLK;
break;
case GCK_CSS_MCK_CLK:
regval |= AT91_PMC_PCR_GCKCSS_MCK_CLK;
break;
case GCK_CSS_AUDIO_CLK:
regval |= AT91_PMC_PCR_GCKCSS_AUDIO_CLK;
break;
default:
printf("Error GCK clock source selection!\n");
return -EINVAL;
}
regval |= AT91_PMC_PCR_CMD_WRITE |
AT91_PMC_PCR_GCKDIV_(div) |
AT91_PMC_PCR_GCKEN;
writel(regval, &pmc->pcr);
do {
udelay(1);
status = readl(&pmc->sr);
} while ((!!(--timeout)) && (!(status & AT91_PMC_GCKRDY)));
if (!timeout)
printf("Timeout waiting for GCK ready!\n");
return 0;
}
u32 at91_get_periph_generated_clk(u32 id)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
u32 regval, clk_source, div;
u32 freq;
if (id > AT91_PMC_PCR_PID_MASK)
return 0;
writel(id, &pmc->pcr);
regval = readl(&pmc->pcr);
clk_source = regval & AT91_PMC_PCR_GCKCSS;
switch (clk_source) {
case AT91_PMC_PCR_GCKCSS_SLOW_CLK:
freq = CONFIG_SYS_AT91_SLOW_CLOCK;
break;
case AT91_PMC_PCR_GCKCSS_MAIN_CLK:
freq = gd->arch.main_clk_rate_hz;
break;
case AT91_PMC_PCR_GCKCSS_PLLA_CLK:
freq = gd->arch.plla_rate_hz;
break;
case AT91_PMC_PCR_GCKCSS_UPLL_CLK:
freq = AT91_UTMI_PLL_CLK_FREQ;
break;
case AT91_PMC_PCR_GCKCSS_MCK_CLK:
freq = gd->arch.mck_rate_hz;
break;
default:
printf("Improper GCK clock source selection!\n");
freq = 0;
break;
}
div = ((regval & AT91_PMC_PCR_GCKDIV) >> AT91_PMC_PCR_GCKDIV_OFFSET);
div += 1;
return freq / div;
}
Reference in a new issue View git blame Copy permalink