Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-19 03:08:31 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/cpu/ppc4xx/start.S
Stefan Roese 71665ebf88 ppc4xx: Add Canyonlands NAND booting support 
460EX doesn't support a fixed bootstrap option to boot from 512 byte page
NAND devices. The only bootstrap option for NAND booting is option F for
2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
EEPROM needs to be programmed accordingly.

This patch adds basic NAND booting support for the AMCC Canyonlands aval
board and also adds support to the "bootstrap" command, to enable NAND
booting I2C setting.

Tested with 512 byte page NAND device (32MByte) on Canyonlands.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-15 07:28:05 +01:00

2055 lines
55 KiB
ArmAsm
Raw Blame History

/*
* Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
* Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
* Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
* Copyright (C) 2007 Stefan Roese <sr@denx.de>, DENX Software Engineering
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*------------------------------------------------------------------------------+
*
* This source code has been made available to you by IBM on an AS-IS
* basis. Anyone receiving this source is licensed under IBM
* copyrights to use it in any way he or she deems fit, including
* copying it, modifying it, compiling it, and redistributing it either
* with or without modifications. No license under IBM patents or
* patent applications is to be implied by the copyright license.
*
* Any user of this software should understand that IBM cannot provide
* technical support for this software and will not be responsible for
* any consequences resulting from the use of this software.
*
* Any person who transfers this source code or any derivative work
* must include the IBM copyright notice, this paragraph, and the
* preceding two paragraphs in the transferred software.
*
* COPYRIGHT I B M CORPORATION 1995
* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
*-------------------------------------------------------------------------------
*/
/* U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards
*
*
* The processor starts at 0xfffffffc and the code is executed
* from flash/rom.
* in memory, but as long we don't jump around before relocating.
* board_init lies at a quite high address and when the cpu has
* jumped there, everything is ok.
* This works because the cpu gives the FLASH (CS0) the whole
* address space at startup, and board_init lies as a echo of
* the flash somewhere up there in the memorymap.
*
* board_init will change CS0 to be positioned at the correct
* address and (s)dram will be positioned at address 0
*/
#include <config.h>
#include <ppc4xx.h>
#include <version.h>
#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/cache.h>
#include <asm/mmu.h>
#ifndef CONFIG_IDENT_STRING
#define CONFIG_IDENT_STRING ""
#endif
#ifdef CFG_INIT_DCACHE_CS
# if (CFG_INIT_DCACHE_CS == 0)
# define PBxAP pb0ap
# define PBxCR pb0cr
# endif
# if (CFG_INIT_DCACHE_CS == 1)
# define PBxAP pb1ap
# define PBxCR pb1cr
# endif
# if (CFG_INIT_DCACHE_CS == 2)
# define PBxAP pb2ap
# define PBxCR pb2cr
# endif
# if (CFG_INIT_DCACHE_CS == 3)
# define PBxAP pb3ap
# define PBxCR pb3cr
# endif
# if (CFG_INIT_DCACHE_CS == 4)
# define PBxAP pb4ap
# define PBxCR pb4cr
# endif
# if (CFG_INIT_DCACHE_CS == 5)
# define PBxAP pb5ap
# define PBxCR pb5cr
# endif
# if (CFG_INIT_DCACHE_CS == 6)
# define PBxAP pb6ap
# define PBxCR pb6cr
# endif
# if (CFG_INIT_DCACHE_CS == 7)
# define PBxAP pb7ap
# define PBxCR pb7cr
# endif
#endif /* CFG_INIT_DCACHE_CS */
#if (defined(CFG_INIT_RAM_DCACHE) && (CFG_INIT_RAM_END > (4 << 10)))
#error Only 4k of init-ram is supported - please adjust CFG_INIT_RAM_END!
#endif
#define function_prolog(func_name) .text; \
.align 2; \
.globl func_name; \
func_name:
#define function_epilog(func_name) .type func_name,@function; \
.size func_name,.-func_name
/* We don't want the MMU yet.
*/
#undef MSR_KERNEL
#define MSR_KERNEL ( MSR_ME ) /* Machine Check */
.extern ext_bus_cntlr_init
.extern sdram_init
#ifdef CONFIG_NAND_U_BOOT
.extern reconfig_tlb0
#endif
/*
* Set up GOT: Global Offset Table
*
* Use r14 to access the GOT
*/
#if !defined(CONFIG_NAND_SPL)
START_GOT
GOT_ENTRY(_GOT2_TABLE_)
GOT_ENTRY(_FIXUP_TABLE_)
GOT_ENTRY(_start)
GOT_ENTRY(_start_of_vectors)
GOT_ENTRY(_end_of_vectors)
GOT_ENTRY(transfer_to_handler)
GOT_ENTRY(__init_end)
GOT_ENTRY(_end)
GOT_ENTRY(__bss_start)
END_GOT
#endif /* CONFIG_NAND_SPL */
#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
/*
* NAND U-Boot image is started from offset 0
*/
.text
#if defined(CONFIG_440)
bl reconfig_tlb0
#endif
GET_GOT
bl cpu_init_f /* run low-level CPU init code (from Flash) */
bl board_init_f
#endif
/*
* 440 Startup -- on reset only the top 4k of the effective
* address space is mapped in by an entry in the instruction
* and data shadow TLB. The .bootpg section is located in the
* top 4k & does only what's necessary to map in the the rest
* of the boot rom. Once the boot rom is mapped in we can
* proceed with normal startup.
*
* NOTE: CS0 only covers the top 2MB of the effective address
* space after reset.
*/
#if defined(CONFIG_440)
#if !defined(CONFIG_NAND_SPL)
.section .bootpg,"ax"
#endif
.globl _start_440
/**************************************************************************/
_start_440:
/*--------------------------------------------------------------------+
| 440EPX BUP Change - Hardware team request
+--------------------------------------------------------------------*/
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
sync
nop
nop
#endif
/*----------------------------------------------------------------+
| Core bug fix. Clear the esr
+-----------------------------------------------------------------*/
li r0,0
mtspr esr,r0
/*----------------------------------------------------------------*/
/* Clear and set up some registers. */
/*----------------------------------------------------------------*/
iccci r0,r0 /* NOTE: operands not used for 440 */
dccci r0,r0 /* NOTE: operands not used for 440 */
sync
li r0,0
mtspr srr0,r0
mtspr srr1,r0
mtspr csrr0,r0
mtspr csrr1,r0
/* NOTE: 440GX adds machine check status regs */
#if defined(CONFIG_440) && !defined(CONFIG_440GP)
mtspr mcsrr0,r0
mtspr mcsrr1,r0
mfspr r1,mcsr
mtspr mcsr,r1
#endif
/*----------------------------------------------------------------*/
/* CCR0 init */
/*----------------------------------------------------------------*/
/* Disable store gathering & broadcast, guarantee inst/data
* cache block touch, force load/store alignment
* (see errata 1.12: 440_33)
*/
lis r1,0x0030 /* store gathering & broadcast disable */
ori r1,r1,0x6000 /* cache touch */
mtspr ccr0,r1
/*----------------------------------------------------------------*/
/* Initialize debug */
/*----------------------------------------------------------------*/
mfspr r1,dbcr0
andis. r1, r1, 0x8000 /* test DBCR0[EDM] bit */
bne skip_debug_init /* if set, don't clear debug register */
mtspr dbcr0,r0
mtspr dbcr1,r0
mtspr dbcr2,r0
mtspr iac1,r0
mtspr iac2,r0
mtspr iac3,r0
mtspr dac1,r0
mtspr dac2,r0
mtspr dvc1,r0
mtspr dvc2,r0
mfspr r1,dbsr
mtspr dbsr,r1 /* Clear all valid bits */
skip_debug_init:
#if defined (CONFIG_440SPE)
/*----------------------------------------------------------------+
| Initialize Core Configuration Reg1.
| a. ICDPEI: Record even parity. Normal operation.
| b. ICTPEI: Record even parity. Normal operation.
| c. DCTPEI: Record even parity. Normal operation.
| d. DCDPEI: Record even parity. Normal operation.
| e. DCUPEI: Record even parity. Normal operation.
| f. DCMPEI: Record even parity. Normal operation.
| g. FCOM: Normal operation
| h. MMUPEI: Record even parity. Normal operation.
| i. FFF: Flush only as much data as necessary.
| j. TCS: Timebase increments from CPU clock.
+-----------------------------------------------------------------*/
li r0,0
mtspr ccr1, r0
/*----------------------------------------------------------------+
| Reset the timebase.
| The previous write to CCR1 sets the timebase source.
+-----------------------------------------------------------------*/
mtspr tbl, r0
mtspr tbu, r0
#endif
/*----------------------------------------------------------------*/
/* Setup interrupt vectors */
/*----------------------------------------------------------------*/
mtspr ivpr,r0 /* Vectors start at 0x0000_0000 */
li r1,0x0100
mtspr ivor0,r1 /* Critical input */
li r1,0x0200
mtspr ivor1,r1 /* Machine check */
li r1,0x0300
mtspr ivor2,r1 /* Data storage */
li r1,0x0400
mtspr ivor3,r1 /* Instruction storage */
li r1,0x0500
mtspr ivor4,r1 /* External interrupt */
li r1,0x0600
mtspr ivor5,r1 /* Alignment */
li r1,0x0700
mtspr ivor6,r1 /* Program check */
li r1,0x0800
mtspr ivor7,r1 /* Floating point unavailable */
li r1,0x0c00
mtspr ivor8,r1 /* System call */
li r1,0x0a00
mtspr ivor9,r1 /* Auxiliary Processor unavailable */
li r1,0x0900
mtspr ivor10,r1 /* Decrementer */
li r1,0x1300
mtspr ivor13,r1 /* Data TLB error */
li r1,0x1400
mtspr ivor14,r1 /* Instr TLB error */
li r1,0x2000
mtspr ivor15,r1 /* Debug */
/*----------------------------------------------------------------*/
/* Configure cache regions */
/*----------------------------------------------------------------*/
mtspr inv0,r0
mtspr inv1,r0
mtspr inv2,r0
mtspr inv3,r0
mtspr dnv0,r0
mtspr dnv1,r0
mtspr dnv2,r0
mtspr dnv3,r0
mtspr itv0,r0
mtspr itv1,r0
mtspr itv2,r0
mtspr itv3,r0
mtspr dtv0,r0
mtspr dtv1,r0
mtspr dtv2,r0
mtspr dtv3,r0
/*----------------------------------------------------------------*/
/* Cache victim limits */
/*----------------------------------------------------------------*/
/* floors 0, ceiling max to use the entire cache -- nothing locked
*/
lis r1,0x0001
ori r1,r1,0xf800
mtspr ivlim,r1
mtspr dvlim,r1
/*----------------------------------------------------------------+
|Initialize MMUCR[STID] = 0.
+-----------------------------------------------------------------*/
mfspr r0,mmucr
addis r1,0,0xFFFF
ori r1,r1,0xFF00
and r0,r0,r1
mtspr mmucr,r0
/*----------------------------------------------------------------*/
/* Clear all TLB entries -- TID = 0, TS = 0 */
/*----------------------------------------------------------------*/
addis r0,0,0x0000
li r1,0x003f /* 64 TLB entries */
mtctr r1
rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/
tlbwe r0,r1,0x0001
tlbwe r0,r1,0x0002
subi r1,r1,0x0001
bdnz rsttlb
/*----------------------------------------------------------------*/
/* TLB entry setup -- step thru tlbtab */
/*----------------------------------------------------------------*/
#if defined(CONFIG_440SPE)
/*----------------------------------------------------------------*/
/* We have different TLB tables for revA and rev B of 440SPe */
/*----------------------------------------------------------------*/
mfspr r1, PVR
lis r0,0x5342
ori r0,r0,0x1891
cmpw r7,r1,r0
bne r7,..revA
bl tlbtabB
b ..goon
..revA:
bl tlbtabA
..goon:
#else
bl tlbtab /* Get tlbtab pointer */
#endif
mr r5,r0
li r1,0x003f /* 64 TLB entries max */
mtctr r1
li r4,0 /* TLB # */
addi r5,r5,-4
1: lwzu r0,4(r5)
cmpwi r0,0
beq 2f /* 0 marks end */
lwzu r1,4(r5)
lwzu r2,4(r5)
tlbwe r0,r4,0 /* TLB Word 0 */
tlbwe r1,r4,1 /* TLB Word 1 */
tlbwe r2,r4,2 /* TLB Word 2 */
addi r4,r4,1 /* Next TLB */
bdnz 1b
/*----------------------------------------------------------------*/
/* Continue from 'normal' start */
/*----------------------------------------------------------------*/
2:
#if defined(CONFIG_NAND_SPL)
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
/*
* Enable internal SRAM (only on 440EPx/GRx, 440EP/GR have no OCM)
*/
lis r2,0x7fff
ori r2,r2,0xffff
mfdcr r1,isram0_dpc
and r1,r1,r2 /* Disable parity check */
mtdcr isram0_dpc,r1
mfdcr r1,isram0_pmeg
and r1,r1,r2 /* Disable pwr mgmt */
mtdcr isram0_pmeg,r1
#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
lis r1,0x4000 /* BAS = 8000_0000 */
ori r1,r1,0x4580 /* 16k */
mtdcr isram0_sb0cr,r1
#endif
#endif
#if defined(CONFIG_440EP)
/*
* On 440EP with no internal SRAM, we setup SDRAM very early
* and copy the NAND_SPL to SDRAM and jump to it
*/
/* Clear Dcache to use as RAM */
addis r3,r0,CFG_INIT_RAM_ADDR@h
ori r3,r3,CFG_INIT_RAM_ADDR@l
addis r4,r0,CFG_INIT_RAM_END@h
ori r4,r4,CFG_INIT_RAM_END@l
rlwinm. r5,r4,0,27,31
rlwinm r5,r4,27,5,31
beq ..d_ran3
addi r5,r5,0x0001
..d_ran3:
mtctr r5
..d_ag3:
dcbz r0,r3
addi r3,r3,32
bdnz ..d_ag3
/*----------------------------------------------------------------*/
/* Setup the stack in internal SRAM */
/*----------------------------------------------------------------*/
lis r1,CFG_INIT_RAM_ADDR@h
ori r1,r1,CFG_INIT_SP_OFFSET@l
li r0,0
stwu r0,-4(r1)
stwu r0,-4(r1) /* Terminate call chain */
stwu r1,-8(r1) /* Save back chain and move SP */
lis r0,RESET_VECTOR@h /* Address of reset vector */
ori r0,r0, RESET_VECTOR@l
stwu r1,-8(r1) /* Save back chain and move SP */
stw r0,+12(r1) /* Save return addr (underflow vect) */
sync
bl early_sdram_init
sync
#endif /* CONFIG_440EP */
/*
* Copy SPL from cache into internal SRAM
*/
li r4,(CFG_NAND_BOOT_SPL_SIZE >> 2) - 1
mtctr r4
lis r2,CFG_NAND_BOOT_SPL_SRC@h
ori r2,r2,CFG_NAND_BOOT_SPL_SRC@l
lis r3,CFG_NAND_BOOT_SPL_DST@h
ori r3,r3,CFG_NAND_BOOT_SPL_DST@l
spl_loop:
lwzu r4,4(r2)
stwu r4,4(r3)
bdnz spl_loop
/*
* Jump to code in RAM
*/
bl 00f
00: mflr r10
lis r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@h
ori r3,r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@l
sub r10,r10,r3
addi r10,r10,28
mtlr r10
blr
start_ram:
sync
isync
#endif /* CONFIG_NAND_SPL */
bl 3f
b _start
3: li r0,0
mtspr srr1,r0 /* Keep things disabled for now */
mflr r1
mtspr srr0,r1
rfi
#endif /* CONFIG_440 */
/*
* r3 - 1st arg to board_init(): IMMP pointer
* r4 - 2nd arg to board_init(): boot flag
*/
#ifndef CONFIG_NAND_SPL
.text
.long 0x27051956 /* U-Boot Magic Number */
.globl version_string
version_string:
.ascii U_BOOT_VERSION
.ascii " (", __DATE__, " - ", __TIME__, ")"
.ascii CONFIG_IDENT_STRING, "\0"
. = EXC_OFF_SYS_RESET
.globl _start_of_vectors
_start_of_vectors:
/* Critical input. */
CRIT_EXCEPTION(0x100, CritcalInput, UnknownException)
#ifdef CONFIG_440
/* Machine check */
MCK_EXCEPTION(0x200, MachineCheck, MachineCheckException)
#else
CRIT_EXCEPTION(0x200, MachineCheck, MachineCheckException)
#endif /* CONFIG_440 */
/* Data Storage exception. */
STD_EXCEPTION(0x300, DataStorage, UnknownException)
/* Instruction Storage exception. */
STD_EXCEPTION(0x400, InstStorage, UnknownException)
/* External Interrupt exception. */
STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
/* Alignment exception. */
. = 0x600
Alignment:
EXCEPTION_PROLOG(SRR0, SRR1)
mfspr r4,DAR
stw r4,_DAR(r21)
mfspr r5,DSISR
stw r5,_DSISR(r21)
addi r3,r1,STACK_FRAME_OVERHEAD
li r20,MSR_KERNEL
rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
lwz r6,GOT(transfer_to_handler)
mtlr r6
blrl
.L_Alignment:
.long AlignmentException - _start + _START_OFFSET
.long int_return - _start + _START_OFFSET
/* Program check exception */
. = 0x700
ProgramCheck:
EXCEPTION_PROLOG(SRR0, SRR1)
addi r3,r1,STACK_FRAME_OVERHEAD
li r20,MSR_KERNEL
rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
lwz r6,GOT(transfer_to_handler)
mtlr r6
blrl
.L_ProgramCheck:
.long ProgramCheckException - _start + _START_OFFSET
.long int_return - _start + _START_OFFSET
#ifdef CONFIG_440
STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
STD_EXCEPTION(0x900, Decrementer, DecrementerPITException)
STD_EXCEPTION(0xa00, APU, UnknownException)
#endif
STD_EXCEPTION(0xc00, SystemCall, UnknownException)
#ifdef CONFIG_440
STD_EXCEPTION(0x1300, DataTLBError, UnknownException)
STD_EXCEPTION(0x1400, InstructionTLBError, UnknownException)
#else
STD_EXCEPTION(0x1000, PIT, DecrementerPITException)
STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
#endif
CRIT_EXCEPTION(0x2000, DebugBreakpoint, DebugException )
.globl _end_of_vectors
_end_of_vectors:
. = _START_OFFSET
#endif
.globl _start
_start:
/*****************************************************************************/
#if defined(CONFIG_440)
/*----------------------------------------------------------------*/
/* Clear and set up some registers. */
/*----------------------------------------------------------------*/
li r0,0x0000
lis r1,0xffff
mtspr dec,r0 /* prevent dec exceptions */
mtspr tbl,r0 /* prevent fit & wdt exceptions */
mtspr tbu,r0
mtspr tsr,r1 /* clear all timer exception status */
mtspr tcr,r0 /* disable all */
mtspr esr,r0 /* clear exception syndrome register */
mtxer r0 /* clear integer exception register */
/*----------------------------------------------------------------*/
/* Debug setup -- some (not very good) ice's need an event*/
/* to establish control :-( Define CFG_INIT_DBCR to the dbsr */
/* value you need in this case 0x8cff 0000 should do the trick */
/*----------------------------------------------------------------*/
#if defined(CFG_INIT_DBCR)
lis r1,0xffff
ori r1,r1,0xffff
mtspr dbsr,r1 /* Clear all status bits */
lis r0,CFG_INIT_DBCR@h
ori r0,r0,CFG_INIT_DBCR@l
mtspr dbcr0,r0
isync
#endif
/*----------------------------------------------------------------*/
/* Setup the internal SRAM */
/*----------------------------------------------------------------*/
li r0,0
#ifdef CFG_INIT_RAM_DCACHE
/* Clear Dcache to use as RAM */
addis r3,r0,CFG_INIT_RAM_ADDR@h
ori r3,r3,CFG_INIT_RAM_ADDR@l
addis r4,r0,CFG_INIT_RAM_END@h
ori r4,r4,CFG_INIT_RAM_END@l
rlwinm. r5,r4,0,27,31
rlwinm r5,r4,27,5,31
beq ..d_ran
addi r5,r5,0x0001
..d_ran:
mtctr r5
..d_ag:
dcbz r0,r3
addi r3,r3,32
bdnz ..d_ag
/*
* Lock the init-ram/stack in d-cache, so that other regions
* may use d-cache as well
* Note, that this current implementation locks exactly 4k
* of d-cache, so please make sure that you don't define a
* bigger init-ram area. Take a look at the lwmon5 440EPx
* implementation as a reference.
*/
msync
isync
/* 8. set TFLOOR/NFLOOR to 8 (-> 8*16*32 bytes locked -> 4k) */
lis r1,0x0201
ori r1,r1,0xf808
mtspr dvlim,r1
lis r1,0x0808
ori r1,r1,0x0808
mtspr dnv0,r1
mtspr dnv1,r1
mtspr dnv2,r1
mtspr dnv3,r1
mtspr dtv0,r1
mtspr dtv1,r1
mtspr dtv2,r1
mtspr dtv3,r1
msync
isync
#endif /* CFG_INIT_RAM_DCACHE */
/* 440EP & 440GR are only 440er PPC's without internal SRAM */
#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
/* not all PPC's have internal SRAM usable as L2-cache */
#if defined(CONFIG_440GX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
mtdcr l2_cache_cfg,r0 /* Ensure L2 Cache is off */
#endif
lis r2,0x7fff
ori r2,r2,0xffff
mfdcr r1,isram0_dpc
and r1,r1,r2 /* Disable parity check */
mtdcr isram0_dpc,r1
mfdcr r1,isram0_pmeg
and r1,r1,r2 /* Disable pwr mgmt */
mtdcr isram0_pmeg,r1
lis r1,0x8000 /* BAS = 8000_0000 */
#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
ori r1,r1,0x0980 /* first 64k */
mtdcr isram0_sb0cr,r1
lis r1,0x8001
ori r1,r1,0x0980 /* second 64k */
mtdcr isram0_sb1cr,r1
lis r1, 0x8002
ori r1,r1, 0x0980 /* third 64k */
mtdcr isram0_sb2cr,r1
lis r1, 0x8003
ori r1,r1, 0x0980 /* fourth 64k */
mtdcr isram0_sb3cr,r1
#elif defined(CONFIG_440SPE)
lis r1,0x0000 /* BAS = 0000_0000 */
ori r1,r1,0x0984 /* first 64k */
mtdcr isram0_sb0cr,r1
lis r1,0x0001
ori r1,r1,0x0984 /* second 64k */
mtdcr isram0_sb1cr,r1
lis r1, 0x0002
ori r1,r1, 0x0984 /* third 64k */
mtdcr isram0_sb2cr,r1
lis r1, 0x0003
ori r1,r1, 0x0984 /* fourth 64k */
mtdcr isram0_sb3cr,r1
#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
lis r1,0x4000 /* BAS = 8000_0000 */
ori r1,r1,0x4580 /* 16k */
mtdcr isram0_sb0cr,r1
#elif defined(CONFIG_440GP)
ori r1,r1,0x0380 /* 8k rw */
mtdcr isram0_sb0cr,r1
mtdcr isram0_sb1cr,r0 /* Disable bank 1 */
#endif
#endif /* #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) */
/*----------------------------------------------------------------*/
/* Setup the stack in internal SRAM */
/*----------------------------------------------------------------*/
lis r1,CFG_INIT_RAM_ADDR@h
ori r1,r1,CFG_INIT_SP_OFFSET@l
li r0,0
stwu r0,-4(r1)
stwu r0,-4(r1) /* Terminate call chain */
stwu r1,-8(r1) /* Save back chain and move SP */
lis r0,RESET_VECTOR@h /* Address of reset vector */
ori r0,r0, RESET_VECTOR@l
stwu r1,-8(r1) /* Save back chain and move SP */
stw r0,+12(r1) /* Save return addr (underflow vect) */
#ifdef CONFIG_NAND_SPL
bl nand_boot /* will not return */
#else
GET_GOT
bl cpu_init_f /* run low-level CPU init code (from Flash) */
bl board_init_f
#endif
#endif /* CONFIG_440 */
/*****************************************************************************/
#ifdef CONFIG_IOP480
/*----------------------------------------------------------------------- */
/* Set up some machine state registers. */
/*----------------------------------------------------------------------- */
addi r0,r0,0x0000 /* initialize r0 to zero */
mtspr esr,r0 /* clear Exception Syndrome Reg */
mttcr r0 /* timer control register */
mtexier r0 /* disable all interrupts */
addis r4,r0,0xFFFF /* set r4 to 0xFFFFFFFF (status in the */
ori r4,r4,0xFFFF /* dbsr is cleared by setting bits to 1) */
mtdbsr r4 /* clear/reset the dbsr */
mtexisr r4 /* clear all pending interrupts */
addis r4,r0,0x8000
mtexier r4 /* enable critical exceptions */
addis r4,r0,0x0000 /* assume 403GCX - enable core clk */
ori r4,r4,0x4020 /* dbling (no harm done on GA and GC */
mtiocr r4 /* since bit not used) & DRC to latch */
/* data bus on rising edge of CAS */
/*----------------------------------------------------------------------- */
/* Clear XER. */
/*----------------------------------------------------------------------- */
mtxer r0
/*----------------------------------------------------------------------- */
/* Invalidate i-cache and d-cache TAG arrays. */
/*----------------------------------------------------------------------- */
addi r3,0,1024 /* 1/4 of I-cache size, half of D-cache */
addi r4,0,1024 /* 1/4 of I-cache */
..cloop:
iccci 0,r3
iccci r4,r3
dccci 0,r3
addic. r3,r3,-16 /* move back one cache line */
bne ..cloop /* loop back to do rest until r3 = 0 */
/* */
/* initialize IOP480 so it can read 1 MB code area for SRAM spaces */
/* this requires enabling MA[17..0], by default only MA[12..0] are enabled. */
/* */
/* first copy IOP480 register base address into r3 */
addis r3,0,0x5000 /* IOP480 register base address hi */
/* ori r3,r3,0x0000 / IOP480 register base address lo */
#ifdef CONFIG_ADCIOP
/* use r4 as the working variable */
/* turn on CS3 (LOCCTL.7) */
lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
andi. r4,r4,0xff7f /* make bit 7 = 0 -- CS3 mode */
stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
#endif
#ifdef CONFIG_DASA_SIM
/* use r4 as the working variable */
/* turn on MA17 (LOCCTL.7) */
lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
ori r4,r4,0x80 /* make bit 7 = 1 -- MA17 mode */
stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
#endif
/* turn on MA16..13 (LCS0BRD.12 = 0) */
lwz r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
andi. r4,r4,0xefff /* make bit 12 = 0 */
stw r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
/* make sure above stores all comlete before going on */
sync
/* last thing, set local init status done bit (DEVINIT.31) */
lwz r4,0x80(r3) /* DEVINIT is at offset 0x80 */
oris r4,r4,0x8000 /* make bit 31 = 1 */
stw r4,0x80(r3) /* DEVINIT is at offset 0x80 */
/* clear all pending interrupts and disable all interrupts */
li r4,-1 /* set p1 to 0xffffffff */
stw r4,0x1b0(r3) /* clear all pending interrupts */
stw r4,0x1b8(r3) /* clear all pending interrupts */
li r4,0 /* set r4 to 0 */
stw r4,0x1b4(r3) /* disable all interrupts */
stw r4,0x1bc(r3) /* disable all interrupts */
/* make sure above stores all comlete before going on */
sync
/*----------------------------------------------------------------------- */
/* Enable two 128MB cachable regions. */
/*----------------------------------------------------------------------- */
addis r1,r0,0xc000
addi r1,r1,0x0001
mticcr r1 /* instruction cache */
addis r1,r0,0x0000
addi r1,r1,0x0000
mtdccr r1 /* data cache */
addis r1,r0,CFG_INIT_RAM_ADDR@h
ori r1,r1,CFG_INIT_SP_OFFSET /* set up the stack to SDRAM */
li r0, 0 /* Make room for stack frame header and */
stwu r0, -4(r1) /* clear final stack frame so that */
stwu r0, -4(r1) /* stack backtraces terminate cleanly */
GET_GOT /* initialize GOT access */
bl board_init_f /* run first part of init code (from Flash) */
#endif /* CONFIG_IOP480 */
/*****************************************************************************/
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
defined(CONFIG_405EX) || defined(CONFIG_405)
/*----------------------------------------------------------------------- */
/* Clear and set up some registers. */
/*----------------------------------------------------------------------- */
addi r4,r0,0x0000
#if !defined(CONFIG_405EX)
mtspr sgr,r4
#else
/*
* On 405EX, completely clearing the SGR leads to PPC hangup
* upon PCIe configuration access. The PCIe memory regions
* need to be guarded!
*/
lis r3,0x0000
ori r3,r3,0x7FFC
mtspr sgr,r3
#endif
mtspr dcwr,r4
mtesr r4 /* clear Exception Syndrome Reg */
mttcr r4 /* clear Timer Control Reg */
mtxer r4 /* clear Fixed-Point Exception Reg */
mtevpr r4 /* clear Exception Vector Prefix Reg */
addi r4,r0,(0xFFFF-0x10000) /* set r4 to 0xFFFFFFFF (status in the */
/* dbsr is cleared by setting bits to 1) */
mtdbsr r4 /* clear/reset the dbsr */
/*----------------------------------------------------------------------- */
/* Invalidate I and D caches. Enable I cache for defined memory regions */
/* to speed things up. Leave the D cache disabled for now. It will be */
/* enabled/left disabled later based on user selected menu options. */
/* Be aware that the I cache may be disabled later based on the menu */
/* options as well. See miscLib/main.c. */
/*----------------------------------------------------------------------- */
bl invalidate_icache
bl invalidate_dcache
/*----------------------------------------------------------------------- */
/* Enable two 128MB cachable regions. */
/*----------------------------------------------------------------------- */
lis r4,0xc000
ori r4,r4,0x0001
mticcr r4 /* instruction cache */
isync
lis r4,0x0000
ori r4,r4,0x0000
mtdccr r4 /* data cache */
#if !(defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR)) || defined(CONFIG_405EX)
/*----------------------------------------------------------------------- */
/* Tune the speed and size for flash CS0 */
/*----------------------------------------------------------------------- */
bl ext_bus_cntlr_init
#endif
#if !(defined(CFG_INIT_DCACHE_CS) || defined(CFG_TEMP_STACK_OCM))
/*
* Boards like the Kilauea (405EX) don't have OCM and can't use
* DCache for init-ram. So setup stack here directly after the
* SDRAM is initialized.
*/
lis r1, CFG_INIT_RAM_ADDR@h
ori r1,r1,CFG_INIT_SP_OFFSET /* set up the stack in SDRAM */
li r0, 0 /* Make room for stack frame header and */
stwu r0, -4(r1) /* clear final stack frame so that */
stwu r0, -4(r1) /* stack backtraces terminate cleanly */
/*
* Set up a dummy frame to store reset vector as return address.
* this causes stack underflow to reset board.
*/
stwu r1, -8(r1) /* Save back chain and move SP */
lis r0, RESET_VECTOR@h /* Address of reset vector */
ori r0, r0, RESET_VECTOR@l
stwu r1, -8(r1) /* Save back chain and move SP */
stw r0, +12(r1) /* Save return addr (underflow vect) */
#endif /* !(CFG_INIT_DCACHE_CS || !CFG_TEM_STACK_OCM) */
#if defined(CONFIG_405EP)
/*----------------------------------------------------------------------- */
/* DMA Status, clear to come up clean */
/*----------------------------------------------------------------------- */
addis r3,r0, 0xFFFF /* Clear all existing DMA status */
ori r3,r3, 0xFFFF
mtdcr dmasr, r3
bl ppc405ep_init /* do ppc405ep specific init */
#endif /* CONFIG_405EP */
#if defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE)
#if defined(CONFIG_405EZ)
/********************************************************************
* Setup OCM - On Chip Memory - PPC405EZ uses OCM Controller V2
*******************************************************************/
/*
* We can map the OCM on the PLB3, so map it at
* CFG_OCM_DATA_ADDR + 0x8000
*/
lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */
ori r3,r3,CFG_OCM_DATA_ADDR@l
ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */
mtdcr ocmplb3cr1,r3 /* Set PLB Access */
ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */
mtdcr ocmplb3cr2,r3 /* Set PLB Access */
isync
lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */
ori r3,r3,CFG_OCM_DATA_ADDR@l
ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */
mtdcr ocmdscr1, r3 /* Set Data Side */
mtdcr ocmiscr1, r3 /* Set Instruction Side */
ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */
mtdcr ocmdscr2, r3 /* Set Data Side */
mtdcr ocmiscr2, r3 /* Set Instruction Side */
addis r3,0,0x0800 /* OCM Data Parity Disable - 1 Wait State */
mtdcr ocmdsisdpc,r3
isync
#else /* CONFIG_405EZ */
/********************************************************************
* Setup OCM - On Chip Memory
*******************************************************************/
/* Setup OCM */
lis r0, 0x7FFF
ori r0, r0, 0xFFFF
mfdcr r3, ocmiscntl /* get instr-side IRAM config */
mfdcr r4, ocmdscntl /* get data-side IRAM config */
and r3, r3, r0 /* disable data-side IRAM */
and r4, r4, r0 /* disable data-side IRAM */
mtdcr ocmiscntl, r3 /* set instr-side IRAM config */
mtdcr ocmdscntl, r4 /* set data-side IRAM config */
isync
lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */
ori r3,r3,CFG_OCM_DATA_ADDR@l
mtdcr ocmdsarc, r3
addis r4, 0, 0xC000 /* OCM data area enabled */
mtdcr ocmdscntl, r4
isync
#endif /* CONFIG_405EZ */
#endif
#ifdef CONFIG_NAND_SPL
/*
* Copy SPL from cache into internal SRAM
*/
li r4,(CFG_NAND_BOOT_SPL_SIZE >> 2) - 1
mtctr r4
lis r2,CFG_NAND_BOOT_SPL_SRC@h
ori r2,r2,CFG_NAND_BOOT_SPL_SRC@l
lis r3,CFG_NAND_BOOT_SPL_DST@h
ori r3,r3,CFG_NAND_BOOT_SPL_DST@l
spl_loop:
lwzu r4,4(r2)
stwu r4,4(r3)
bdnz spl_loop
/*
* Jump to code in RAM
*/
bl 00f
00: mflr r10
lis r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@h
ori r3,r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@l
sub r10,r10,r3
addi r10,r10,28
mtlr r10
blr
start_ram:
sync
isync
#endif /* CONFIG_NAND_SPL */
/*----------------------------------------------------------------------- */
/* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */
/*----------------------------------------------------------------------- */
#ifdef CFG_INIT_DCACHE_CS
/*----------------------------------------------------------------------- */
/* Memory Bank x (nothingness) initialization 1GB+64MEG */
/* used as temporary stack pointer for stage0 */
/*----------------------------------------------------------------------- */
li r4,PBxAP
mtdcr ebccfga,r4
lis r4,0x0380
ori r4,r4,0x0480
mtdcr ebccfgd,r4
addi r4,0,PBxCR
mtdcr ebccfga,r4
lis r4,0x400D
ori r4,r4,0xa000
mtdcr ebccfgd,r4
/* turn on data cache for this region */
lis r4,0x0080
mtdccr r4
/* set stack pointer and clear stack to known value */
lis r1,CFG_INIT_RAM_ADDR@h
ori r1,r1,CFG_INIT_SP_OFFSET@l
li r4,2048 /* we store 2048 words to stack */
mtctr r4
lis r2,CFG_INIT_RAM_ADDR@h /* we also clear data area */
ori r2,r2,CFG_INIT_RAM_END@l /* so cant copy value from r1 */
lis r4,0xdead /* we store 0xdeaddead in the stack */
ori r4,r4,0xdead
..stackloop:
stwu r4,-4(r2)
bdnz ..stackloop
li r0, 0 /* Make room for stack frame header and */
stwu r0, -4(r1) /* clear final stack frame so that */
stwu r0, -4(r1) /* stack backtraces terminate cleanly */
/*
* Set up a dummy frame to store reset vector as return address.
* this causes stack underflow to reset board.
*/
stwu r1, -8(r1) /* Save back chain and move SP */
addis r0, 0, RESET_VECTOR@h /* Address of reset vector */
ori r0, r0, RESET_VECTOR@l
stwu r1, -8(r1) /* Save back chain and move SP */
stw r0, +12(r1) /* Save return addr (underflow vect) */
#elif defined(CFG_TEMP_STACK_OCM) && \
(defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE))
/*
* Stack in OCM.
*/
/* Set up Stack at top of OCM */
lis r1, (CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET)@h
ori r1, r1, (CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET)@l
/* Set up a zeroized stack frame so that backtrace works right */
li r0, 0
stwu r0, -4(r1)
stwu r0, -4(r1)
/*
* Set up a dummy frame to store reset vector as return address.
* this causes stack underflow to reset board.
*/
stwu r1, -8(r1) /* Save back chain and move SP */
lis r0, RESET_VECTOR@h /* Address of reset vector */
ori r0, r0, RESET_VECTOR@l
stwu r1, -8(r1) /* Save back chain and move SP */
stw r0, +12(r1) /* Save return addr (underflow vect) */
#endif /* CFG_INIT_DCACHE_CS */
/*----------------------------------------------------------------------- */
/* Initialize SDRAM Controller */
/*----------------------------------------------------------------------- */
bl sdram_init
#ifdef CONFIG_NAND_SPL
bl nand_boot /* will not return */
#else
GET_GOT /* initialize GOT access */
bl cpu_init_f /* run low-level CPU init code (from Flash) */
/* NEVER RETURNS! */
bl board_init_f /* run first part of init code (from Flash) */
#endif /* CONFIG_NAND_SPL */
#endif /* CONFIG_405GP || CONFIG_405CR || CONFIG_405 || CONFIG_405EP */
/*----------------------------------------------------------------------- */
#ifndef CONFIG_NAND_SPL
/*
* This code finishes saving the registers to the exception frame
* and jumps to the appropriate handler for the exception.
* Register r21 is pointer into trap frame, r1 has new stack pointer.
*/
.globl transfer_to_handler
transfer_to_handler:
stw r22,_NIP(r21)
lis r22,MSR_POW@h
andc r23,r23,r22
stw r23,_MSR(r21)
SAVE_GPR(7, r21)
SAVE_4GPRS(8, r21)
SAVE_8GPRS(12, r21)
SAVE_8GPRS(24, r21)
mflr r23
andi. r24,r23,0x3f00 /* get vector offset */
stw r24,TRAP(r21)
li r22,0
stw r22,RESULT(r21)
mtspr SPRG2,r22 /* r1 is now kernel sp */
lwz r24,0(r23) /* virtual address of handler */
lwz r23,4(r23) /* where to go when done */
mtspr SRR0,r24
mtspr SRR1,r20
mtlr r23
SYNC
rfi /* jump to handler, enable MMU */
int_return:
mfmsr r28 /* Disable interrupts */
li r4,0
ori r4,r4,MSR_EE
andc r28,r28,r4
SYNC /* Some chip revs need this... */
mtmsr r28
SYNC
lwz r2,_CTR(r1)
lwz r0,_LINK(r1)
mtctr r2
mtlr r0
lwz r2,_XER(r1)
lwz r0,_CCR(r1)
mtspr XER,r2
mtcrf 0xFF,r0
REST_10GPRS(3, r1)
REST_10GPRS(13, r1)
REST_8GPRS(23, r1)
REST_GPR(31, r1)
lwz r2,_NIP(r1) /* Restore environment */
lwz r0,_MSR(r1)
mtspr SRR0,r2
mtspr SRR1,r0
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
lwz r1,GPR1(r1)
SYNC
rfi
crit_return:
mfmsr r28 /* Disable interrupts */
li r4,0
ori r4,r4,MSR_EE
andc r28,r28,r4
SYNC /* Some chip revs need this... */
mtmsr r28
SYNC
lwz r2,_CTR(r1)
lwz r0,_LINK(r1)
mtctr r2
mtlr r0
lwz r2,_XER(r1)
lwz r0,_CCR(r1)
mtspr XER,r2
mtcrf 0xFF,r0
REST_10GPRS(3, r1)
REST_10GPRS(13, r1)
REST_8GPRS(23, r1)
REST_GPR(31, r1)
lwz r2,_NIP(r1) /* Restore environment */
lwz r0,_MSR(r1)
mtspr csrr0,r2
mtspr csrr1,r0
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
lwz r1,GPR1(r1)
SYNC
rfci
#ifdef CONFIG_440
mck_return:
mfmsr r28 /* Disable interrupts */
li r4,0
ori r4,r4,MSR_EE
andc r28,r28,r4
SYNC /* Some chip revs need this... */
mtmsr r28
SYNC
lwz r2,_CTR(r1)
lwz r0,_LINK(r1)
mtctr r2
mtlr r0
lwz r2,_XER(r1)
lwz r0,_CCR(r1)
mtspr XER,r2
mtcrf 0xFF,r0
REST_10GPRS(3, r1)
REST_10GPRS(13, r1)
REST_8GPRS(23, r1)
REST_GPR(31, r1)
lwz r2,_NIP(r1) /* Restore environment */
lwz r0,_MSR(r1)
mtspr mcsrr0,r2
mtspr mcsrr1,r0
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
lwz r1,GPR1(r1)
SYNC
rfmci
#endif /* CONFIG_440 */
.globl get_pvr
get_pvr:
mfspr r3, PVR
blr
/*------------------------------------------------------------------------------- */
/* Function: out16 */
/* Description: Output 16 bits */
/*------------------------------------------------------------------------------- */
.globl out16
out16:
sth r4,0x0000(r3)
blr
/*------------------------------------------------------------------------------- */
/* Function: out16r */
/* Description: Byte reverse and output 16 bits */
/*------------------------------------------------------------------------------- */
.globl out16r
out16r:
sthbrx r4,r0,r3
blr
/*------------------------------------------------------------------------------- */
/* Function: out32r */
/* Description: Byte reverse and output 32 bits */
/*------------------------------------------------------------------------------- */
.globl out32r
out32r:
stwbrx r4,r0,r3
blr
/*------------------------------------------------------------------------------- */
/* Function: in16 */
/* Description: Input 16 bits */
/*------------------------------------------------------------------------------- */
.globl in16
in16:
lhz r3,0x0000(r3)
blr
/*------------------------------------------------------------------------------- */
/* Function: in16r */
/* Description: Input 16 bits and byte reverse */
/*------------------------------------------------------------------------------- */
.globl in16r
in16r:
lhbrx r3,r0,r3
blr
/*------------------------------------------------------------------------------- */
/* Function: in32r */
/* Description: Input 32 bits and byte reverse */
/*------------------------------------------------------------------------------- */
.globl in32r
in32r:
lwbrx r3,r0,r3
blr
/*
* void relocate_code (addr_sp, gd, addr_moni)
*
* This "function" does not return, instead it continues in RAM
* after relocating the monitor code.
*
* r3 = dest
* r4 = src
* r5 = length in bytes
* r6 = cachelinesize
*/
.globl relocate_code
relocate_code:
#ifdef CONFIG_4xx_DCACHE
/*
* We need to flush the Init Data before the dcache will be
* invalidated
*/
/* save regs */
mr r9,r3
mr r10,r4
mr r11,r5
mr r3,r4
addi r4,r4,0x200 /* should be enough for init data */
bl flush_dcache_range
/* restore regs */
mr r3,r9
mr r4,r10
mr r5,r11
#endif
#ifdef CFG_INIT_RAM_DCACHE
/*
* Unlock the previously locked d-cache
*/
msync
isync
/* set TFLOOR/NFLOOR to 0 again */
lis r6,0x0001
ori r6,r6,0xf800
mtspr dvlim,r6
lis r6,0x0000
ori r6,r6,0x0000
mtspr dnv0,r6
mtspr dnv1,r6
mtspr dnv2,r6
mtspr dnv3,r6
mtspr dtv0,r6
mtspr dtv1,r6
mtspr dtv2,r6
mtspr dtv3,r6
msync
isync
#endif /* CFG_INIT_RAM_DCACHE */
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
/*
* On some 440er platforms the cache is enabled in the first TLB (Boot-CS)
* to speed up the boot process. Now this cache needs to be disabled.
*/
iccci 0,0 /* Invalidate inst cache */
dccci 0,0 /* Invalidate data cache, now no longer our stack */
sync
isync
#ifdef CFG_TLB_FOR_BOOT_FLASH
addi r1,r0,CFG_TLB_FOR_BOOT_FLASH /* Use defined TLB */
#else
addi r1,r0,0x0000 /* Default TLB entry is #0 */
#endif
tlbre r0,r1,0x0002 /* Read contents */
ori r0,r0,0x0c00 /* Or in the inhibit, write through bit */
tlbwe r0,r1,0x0002 /* Save it out */
sync
isync
#endif
mr r1, r3 /* Set new stack pointer */
mr r9, r4 /* Save copy of Init Data pointer */
mr r10, r5 /* Save copy of Destination Address */
mr r3, r5 /* Destination Address */
lis r4, CFG_MONITOR_BASE@h /* Source Address */
ori r4, r4, CFG_MONITOR_BASE@l
lwz r5, GOT(__init_end)
sub r5, r5, r4
li r6, L1_CACHE_BYTES /* Cache Line Size */
/*
* Fix GOT pointer:
*
* New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
*
* Offset:
*/
sub r15, r10, r4
/* First our own GOT */
add r14, r14, r15
/* the the one used by the C code */
add r30, r30, r15
/*
* Now relocate code
*/
cmplw cr1,r3,r4
addi r0,r5,3
srwi. r0,r0,2
beq cr1,4f /* In place copy is not necessary */
beq 7f /* Protect against 0 count */
mtctr r0
bge cr1,2f
la r8,-4(r4)
la r7,-4(r3)
1: lwzu r0,4(r8)
stwu r0,4(r7)
bdnz 1b
b 4f
2: slwi r0,r0,2
add r8,r4,r0
add r7,r3,r0
3: lwzu r0,-4(r8)
stwu r0,-4(r7)
bdnz 3b
/*
* Now flush the cache: note that we must start from a cache aligned
* address. Otherwise we might miss one cache line.
*/
4: cmpwi r6,0
add r5,r3,r5
beq 7f /* Always flush prefetch queue in any case */
subi r0,r6,1
andc r3,r3,r0
mr r4,r3
5: dcbst 0,r4
add r4,r4,r6
cmplw r4,r5
blt 5b
sync /* Wait for all dcbst to complete on bus */
mr r4,r3
6: icbi 0,r4
add r4,r4,r6
cmplw r4,r5
blt 6b
7: sync /* Wait for all icbi to complete on bus */
isync
/*
* We are done. Do not return, instead branch to second part of board
* initialization, now running from RAM.
*/
addi r0, r10, in_ram - _start + _START_OFFSET
mtlr r0
blr /* NEVER RETURNS! */
in_ram:
/*
* Relocation Function, r14 point to got2+0x8000
*
* Adjust got2 pointers, no need to check for 0, this code
* already puts a few entries in the table.
*/
li r0,__got2_entries@sectoff@l
la r3,GOT(_GOT2_TABLE_)
lwz r11,GOT(_GOT2_TABLE_)
mtctr r0
sub r11,r3,r11
addi r3,r3,-4
1: lwzu r0,4(r3)
add r0,r0,r11
stw r0,0(r3)
bdnz 1b
/*
* Now adjust the fixups and the pointers to the fixups
* in case we need to move ourselves again.
*/
2: li r0,__fixup_entries@sectoff@l
lwz r3,GOT(_FIXUP_TABLE_)
cmpwi r0,0
mtctr r0
addi r3,r3,-4
beq 4f
3: lwzu r4,4(r3)
lwzux r0,r4,r11
add r0,r0,r11
stw r10,0(r3)
stw r0,0(r4)
bdnz 3b
4:
clear_bss:
/*
* Now clear BSS segment
*/
lwz r3,GOT(__bss_start)
lwz r4,GOT(_end)
cmplw 0, r3, r4
beq 7f
li r0, 0
andi. r5, r4, 3
beq 6f
sub r4, r4, r5
mtctr r5
mr r5, r4
5: stb r0, 0(r5)
addi r5, r5, 1
bdnz 5b
6:
stw r0, 0(r3)
addi r3, r3, 4
cmplw 0, r3, r4
bne 6b
7:
mr r3, r9 /* Init Data pointer */
mr r4, r10 /* Destination Address */
bl board_init_r
/*
* Copy exception vector code to low memory
*
* r3: dest_addr
* r7: source address, r8: end address, r9: target address
*/
.globl trap_init
trap_init:
lwz r7, GOT(_start_of_vectors)
lwz r8, GOT(_end_of_vectors)
li r9, 0x100 /* reset vector always at 0x100 */
cmplw 0, r7, r8
bgelr /* return if r7>=r8 - just in case */
mflr r4 /* save link register */
1:
lwz r0, 0(r7)
stw r0, 0(r9)
addi r7, r7, 4
addi r9, r9, 4
cmplw 0, r7, r8
bne 1b
/*
* relocate `hdlr' and `int_return' entries
*/
li r7, .L_MachineCheck - _start + _START_OFFSET
li r8, Alignment - _start + _START_OFFSET
2:
bl trap_reloc
addi r7, r7, 0x100 /* next exception vector */
cmplw 0, r7, r8
blt 2b
li r7, .L_Alignment - _start + _START_OFFSET
bl trap_reloc
li r7, .L_ProgramCheck - _start + _START_OFFSET
bl trap_reloc
#ifdef CONFIG_440
li r7, .L_FPUnavailable - _start + _START_OFFSET
bl trap_reloc
li r7, .L_Decrementer - _start + _START_OFFSET
bl trap_reloc
li r7, .L_APU - _start + _START_OFFSET
bl trap_reloc
li r7, .L_InstructionTLBError - _start + _START_OFFSET
bl trap_reloc
li r7, .L_DataTLBError - _start + _START_OFFSET
bl trap_reloc
#else /* CONFIG_440 */
li r7, .L_PIT - _start + _START_OFFSET
bl trap_reloc
li r7, .L_InstructionTLBMiss - _start + _START_OFFSET
bl trap_reloc
li r7, .L_DataTLBMiss - _start + _START_OFFSET
bl trap_reloc
#endif /* CONFIG_440 */
li r7, .L_DebugBreakpoint - _start + _START_OFFSET
bl trap_reloc
#if !defined(CONFIG_440)
addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
mtmsr r7 /* change MSR */
#else
bl __440_msr_set
b __440_msr_continue
__440_msr_set:
addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
mtspr srr1,r7
mflr r7
mtspr srr0,r7
rfi
__440_msr_continue:
#endif
mtlr r4 /* restore link register */
blr
/*
* Function: relocate entries for one exception vector
*/
trap_reloc:
lwz r0, 0(r7) /* hdlr ... */
add r0, r0, r3 /* ... += dest_addr */
stw r0, 0(r7)
lwz r0, 4(r7) /* int_return ... */
add r0, r0, r3 /* ... += dest_addr */
stw r0, 4(r7)
blr
#if defined(CONFIG_440)
/*----------------------------------------------------------------------------+
| dcbz_area.
+----------------------------------------------------------------------------*/
function_prolog(dcbz_area)
rlwinm. r5,r4,0,27,31
rlwinm r5,r4,27,5,31
beq ..d_ra2
addi r5,r5,0x0001
..d_ra2:mtctr r5
..d_ag2:dcbz r0,r3
addi r3,r3,32
bdnz ..d_ag2
sync
blr
function_epilog(dcbz_area)
/*----------------------------------------------------------------------------+
| dflush. Assume 32K at vector address is cachable.
+----------------------------------------------------------------------------*/
function_prolog(dflush)
mfmsr r9
rlwinm r8,r9,0,15,13
rlwinm r8,r8,0,17,15
mtmsr r8
mfspr r8,dvlim
addi r3,r0,0x0000
mtspr dvlim,r3
mfspr r3,ivpr
addi r4,r0,1024
mtctr r4
..dflush_loop:
lwz r6,0x0(r3)
addi r3,r3,32
bdnz ..dflush_loop
addi r3,r3,-32
mtctr r4
..ag: dcbf r0,r3
addi r3,r3,-32
bdnz ..ag
mtspr dvlim,r8
sync
mtmsr r9
blr
function_epilog(dflush)
#endif /* CONFIG_440 */
#endif /* CONFIG_NAND_SPL */
/*------------------------------------------------------------------------------- */
/* Function: in8 */
/* Description: Input 8 bits */
/*------------------------------------------------------------------------------- */
.globl in8
in8:
lbz r3,0x0000(r3)
blr
/*------------------------------------------------------------------------------- */
/* Function: out8 */
/* Description: Output 8 bits */
/*------------------------------------------------------------------------------- */
.globl out8
out8:
stb r4,0x0000(r3)
blr
/*------------------------------------------------------------------------------- */
/* Function: out32 */
/* Description: Output 32 bits */
/*------------------------------------------------------------------------------- */
.globl out32
out32:
stw r4,0x0000(r3)
blr
/*------------------------------------------------------------------------------- */
/* Function: in32 */
/* Description: Input 32 bits */
/*------------------------------------------------------------------------------- */
.globl in32
in32:
lwz 3,0x0000(3)
blr
/**************************************************************************/
/* PPC405EP specific stuff */
/**************************************************************************/
#ifdef CONFIG_405EP
ppc405ep_init:
#ifdef CONFIG_BUBINGA
/*
* Initialize EBC chip selects 1 & 4 and GPIO pins (for alternate
* function) to support FPGA and NVRAM accesses below.
*/
lis r3,GPIO0_OSRH@h /* config GPIO output select */
ori r3,r3,GPIO0_OSRH@l
lis r4,CFG_GPIO0_OSRH@h
ori r4,r4,CFG_GPIO0_OSRH@l
stw r4,0(r3)
lis r3,GPIO0_OSRL@h
ori r3,r3,GPIO0_OSRL@l
lis r4,CFG_GPIO0_OSRL@h
ori r4,r4,CFG_GPIO0_OSRL@l
stw r4,0(r3)
lis r3,GPIO0_ISR1H@h /* config GPIO input select */
ori r3,r3,GPIO0_ISR1H@l
lis r4,CFG_GPIO0_ISR1H@h
ori r4,r4,CFG_GPIO0_ISR1H@l
stw r4,0(r3)
lis r3,GPIO0_ISR1L@h
ori r3,r3,GPIO0_ISR1L@l
lis r4,CFG_GPIO0_ISR1L@h
ori r4,r4,CFG_GPIO0_ISR1L@l
stw r4,0(r3)
lis r3,GPIO0_TSRH@h /* config GPIO three-state select */
ori r3,r3,GPIO0_TSRH@l
lis r4,CFG_GPIO0_TSRH@h
ori r4,r4,CFG_GPIO0_TSRH@l
stw r4,0(r3)
lis r3,GPIO0_TSRL@h
ori r3,r3,GPIO0_TSRL@l
lis r4,CFG_GPIO0_TSRL@h
ori r4,r4,CFG_GPIO0_TSRL@l
stw r4,0(r3)
lis r3,GPIO0_TCR@h /* config GPIO driver output enables */
ori r3,r3,GPIO0_TCR@l
lis r4,CFG_GPIO0_TCR@h
ori r4,r4,CFG_GPIO0_TCR@l
stw r4,0(r3)
li r3,pb1ap /* program EBC bank 1 for RTC access */
mtdcr ebccfga,r3
lis r3,CFG_EBC_PB1AP@h
ori r3,r3,CFG_EBC_PB1AP@l
mtdcr ebccfgd,r3
li r3,pb1cr
mtdcr ebccfga,r3
lis r3,CFG_EBC_PB1CR@h
ori r3,r3,CFG_EBC_PB1CR@l
mtdcr ebccfgd,r3
li r3,pb1ap /* program EBC bank 1 for RTC access */
mtdcr ebccfga,r3
lis r3,CFG_EBC_PB1AP@h
ori r3,r3,CFG_EBC_PB1AP@l
mtdcr ebccfgd,r3
li r3,pb1cr
mtdcr ebccfga,r3
lis r3,CFG_EBC_PB1CR@h
ori r3,r3,CFG_EBC_PB1CR@l
mtdcr ebccfgd,r3
li r3,pb4ap /* program EBC bank 4 for FPGA access */
mtdcr ebccfga,r3
lis r3,CFG_EBC_PB4AP@h
ori r3,r3,CFG_EBC_PB4AP@l
mtdcr ebccfgd,r3
li r3,pb4cr
mtdcr ebccfga,r3
lis r3,CFG_EBC_PB4CR@h
ori r3,r3,CFG_EBC_PB4CR@l
mtdcr ebccfgd,r3
#endif
/*
!-----------------------------------------------------------------------
! Check to see if chip is in bypass mode.
! If so, write stored CPC0_PLLMR0 and CPC0_PLLMR1 values and perform a
! CPU reset Otherwise, skip this step and keep going.
! Note: Running BIOS in bypass mode is not supported since PLB speed
! will not be fast enough for the SDRAM (min 66MHz)
!-----------------------------------------------------------------------
*/
mfdcr r5, CPC0_PLLMR1
rlwinm r4,r5,1,0x1 /* get system clock source (SSCS) */
cmpi cr0,0,r4,0x1
beq pll_done /* if SSCS =b'1' then PLL has */
/* already been set */
/* and CPU has been reset */
/* so skip to next section */
#ifdef CONFIG_BUBINGA
/*
!-----------------------------------------------------------------------
! Read NVRAM to get value to write in PLLMR.
! If value has not been correctly saved, write default value
! Default config values (assuming on-board 33MHz SYS_CLK) are above.
! See CPU_DEFAULT_200 and CPU_DEFAULT_266 above.
!
! WARNING: This code assumes the first three words in the nvram_t
! structure in openbios.h. Changing the beginning of
! the structure will break this code.
!
!-----------------------------------------------------------------------
*/
addis r3,0,NVRAM_BASE@h
addi r3,r3,NVRAM_BASE@l
lwz r4, 0(r3)
addis r5,0,NVRVFY1@h
addi r5,r5,NVRVFY1@l
cmp cr0,0,r4,r5 /* Compare 1st NVRAM Magic number*/
bne ..no_pllset
addi r3,r3,4
lwz r4, 0(r3)
addis r5,0,NVRVFY2@h
addi r5,r5,NVRVFY2@l
cmp cr0,0,r4,r5 /* Compare 2 NVRAM Magic number */
bne ..no_pllset
addi r3,r3,8 /* Skip over conf_size */
lwz r4, 4(r3) /* Load PLLMR1 value from NVRAM */
lwz r3, 0(r3) /* Load PLLMR0 value from NVRAM */
rlwinm r5,r4,1,0x1 /* get system clock source (SSCS) */
cmpi cr0,0,r5,1 /* See if PLL is locked */
beq pll_write
..no_pllset:
#endif /* CONFIG_BUBINGA */
#ifdef CONFIG_TAIHU
mfdcr r4, CPC0_BOOT
andi. r5, r4, CPC0_BOOT_SEP@l
bne strap_1 /* serial eeprom present */
addis r5,0,CPLD_REG0_ADDR@h
ori r5,r5,CPLD_REG0_ADDR@l
andi. r5, r5, 0x10
bne _pci_66mhz
#endif /* CONFIG_TAIHU */
#if defined(CONFIG_ZEUS)
mfdcr r4, CPC0_BOOT
andi. r5, r4, CPC0_BOOT_SEP@l
bne strap_1 /* serial eeprom present */
lis r3,0x0000
addi r3,r3,0x3030
lis r4,0x8042
addi r4,r4,0x223e
b 1f
strap_1:
mfdcr r3, CPC0_PLLMR0
mfdcr r4, CPC0_PLLMR1
b 1f
#endif
addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */
ori r3,r3,PLLMR0_DEFAULT@l /* */
addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */
ori r4,r4,PLLMR1_DEFAULT@l /* */
#ifdef CONFIG_TAIHU
b 1f
_pci_66mhz:
addis r3,0,PLLMR0_DEFAULT_PCI66@h
ori r3,r3,PLLMR0_DEFAULT_PCI66@l
addis r4,0,PLLMR1_DEFAULT_PCI66@h
ori r4,r4,PLLMR1_DEFAULT_PCI66@l
b 1f
strap_1:
mfdcr r3, CPC0_PLLMR0
mfdcr r4, CPC0_PLLMR1
#endif /* CONFIG_TAIHU */
1:
b pll_write /* Write the CPC0_PLLMR with new value */
pll_done:
/*
!-----------------------------------------------------------------------
! Clear Soft Reset Register
! This is needed to enable PCI if not booting from serial EPROM
!-----------------------------------------------------------------------
*/
addi r3, 0, 0x0
mtdcr CPC0_SRR, r3
addis r3,0,0x0010
mtctr r3
pci_wait:
bdnz pci_wait
blr /* return to main code */
/*
!-----------------------------------------------------------------------------
! Function: pll_write
! Description: Updates the value of the CPC0_PLLMR according to CMOS27E documentation
! That is:
! 1. Pll is first disabled (de-activated by putting in bypass mode)
! 2. PLL is reset
! 3. Clock dividers are set while PLL is held in reset and bypassed
! 4. PLL Reset is cleared
! 5. Wait 100us for PLL to lock
! 6. A core reset is performed
! Input: r3 = Value to write to CPC0_PLLMR0
! Input: r4 = Value to write to CPC0_PLLMR1
! Output r3 = none
!-----------------------------------------------------------------------------
*/
pll_write:
mfdcr r5, CPC0_UCR
andis. r5,r5,0xFFFF
ori r5,r5,0x0101 /* Stop the UART clocks */
mtdcr CPC0_UCR,r5 /* Before changing PLL */
mfdcr r5, CPC0_PLLMR1
rlwinm r5,r5,0,0x7FFFFFFF /* Disable PLL */
mtdcr CPC0_PLLMR1,r5
oris r5,r5,0x4000 /* Set PLL Reset */
mtdcr CPC0_PLLMR1,r5
mtdcr CPC0_PLLMR0,r3 /* Set clock dividers */
rlwinm r5,r4,0,0x3FFFFFFF /* Reset & Bypass new PLL dividers */
oris r5,r5,0x4000 /* Set PLL Reset */
mtdcr CPC0_PLLMR1,r5 /* Set clock dividers */
rlwinm r5,r5,0,0xBFFFFFFF /* Clear PLL Reset */
mtdcr CPC0_PLLMR1,r5
/*
! Wait min of 100us for PLL to lock.
! See CMOS 27E databook for more info.
! At 200MHz, that means waiting 20,000 instructions
*/
addi r3,0,20000 /* 2000 = 0x4e20 */
mtctr r3
pll_wait:
bdnz pll_wait
oris r5,r5,0x8000 /* Enable PLL */
mtdcr CPC0_PLLMR1,r5 /* Engage */
/*
* Reset CPU to guarantee timings are OK
* Not sure if this is needed...
*/
addis r3,0,0x1000
mtspr dbcr0,r3 /* This will cause a CPU core reset, and */
/* execution will continue from the poweron */
/* vector of 0xfffffffc */
#endif /* CONFIG_405EP */
#if defined(CONFIG_440)
/*----------------------------------------------------------------------------+
| mttlb3.
+----------------------------------------------------------------------------*/
function_prolog(mttlb3)
TLBWE(4,3,2)
blr
function_epilog(mttlb3)
/*----------------------------------------------------------------------------+
| mftlb3.
+----------------------------------------------------------------------------*/
function_prolog(mftlb3)
TLBRE(3,3,2)
blr
function_epilog(mftlb3)
/*----------------------------------------------------------------------------+
| mttlb2.
+----------------------------------------------------------------------------*/
function_prolog(mttlb2)
TLBWE(4,3,1)
blr
function_epilog(mttlb2)
/*----------------------------------------------------------------------------+
| mftlb2.
+----------------------------------------------------------------------------*/
function_prolog(mftlb2)
TLBRE(3,3,1)
blr
function_epilog(mftlb2)
/*----------------------------------------------------------------------------+
| mttlb1.
+----------------------------------------------------------------------------*/
function_prolog(mttlb1)
TLBWE(4,3,0)
blr
function_epilog(mttlb1)
/*----------------------------------------------------------------------------+
| mftlb1.
+----------------------------------------------------------------------------*/
function_prolog(mftlb1)
TLBRE(3,3,0)
blr
function_epilog(mftlb1)
#endif /* CONFIG_440 */
Reference in a new issue View git blame Copy permalink