mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
8bde7f776c
- remove trailing white space, trailing empty lines, C++ comments, etc. - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c) * Patches by Kenneth Johansson, 25 Jun 2003: - major rework of command structure (work done mostly by Michal Cendrowski and Joakim Kristiansen)
578 lines
18 KiB
C
578 lines
18 KiB
C
/*
|
|
* (C) Copyright 2001
|
|
* Denis Peter, MPL AG Switzerland
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*
|
|
*
|
|
* Most of these definitions are derived from
|
|
* linux/drivers/scsi/sym53c8xx_defs.h
|
|
*
|
|
*/
|
|
|
|
#ifndef _SYM53C8XX_DEFS_H
|
|
#define _SYM53C8XX_DEFS_H
|
|
|
|
|
|
#define SCNTL0 0x00 /* full arb., ena parity, par->ATN */
|
|
|
|
#define SCNTL1 0x01 /* no reset */
|
|
#define ISCON 0x10 /* connected to scsi */
|
|
#define CRST 0x08 /* force reset */
|
|
#define IARB 0x02 /* immediate arbitration */
|
|
|
|
#define SCNTL2 0x02 /* no disconnect expected */
|
|
#define SDU 0x80 /* cmd: disconnect will raise error */
|
|
#define CHM 0x40 /* sta: chained mode */
|
|
#define WSS 0x08 /* sta: wide scsi send [W]*/
|
|
#define WSR 0x01 /* sta: wide scsi received [W]*/
|
|
|
|
#define SCNTL3 0x03 /* cnf system clock dependent */
|
|
#define EWS 0x08 /* cmd: enable wide scsi [W]*/
|
|
#define ULTRA 0x80 /* cmd: ULTRA enable */
|
|
/* bits 0-2, 7 rsvd for C1010 */
|
|
|
|
#define SCID 0x04 /* cnf host adapter scsi address */
|
|
#define RRE 0x40 /* r/w:e enable response to resel. */
|
|
#define SRE 0x20 /* r/w:e enable response to select */
|
|
|
|
#define SXFER 0x05 /* ### Sync speed and count */
|
|
/* bits 6-7 rsvd for C1010 */
|
|
|
|
#define SDID 0x06 /* ### Destination-ID */
|
|
|
|
#define GPREG 0x07 /* ??? IO-Pins */
|
|
|
|
#define SFBR 0x08 /* ### First byte in phase */
|
|
|
|
#define SOCL 0x09
|
|
#define CREQ 0x80 /* r/w: SCSI-REQ */
|
|
#define CACK 0x40 /* r/w: SCSI-ACK */
|
|
#define CBSY 0x20 /* r/w: SCSI-BSY */
|
|
#define CSEL 0x10 /* r/w: SCSI-SEL */
|
|
#define CATN 0x08 /* r/w: SCSI-ATN */
|
|
#define CMSG 0x04 /* r/w: SCSI-MSG */
|
|
#define CC_D 0x02 /* r/w: SCSI-C_D */
|
|
#define CI_O 0x01 /* r/w: SCSI-I_O */
|
|
|
|
#define SSID 0x0a
|
|
|
|
#define SBCL 0x0b
|
|
|
|
#define DSTAT 0x0c
|
|
#define DFE 0x80 /* sta: dma fifo empty */
|
|
#define MDPE 0x40 /* int: master data parity error */
|
|
#define BF 0x20 /* int: script: bus fault */
|
|
#define ABRT 0x10 /* int: script: command aborted */
|
|
#define SSI 0x08 /* int: script: single step */
|
|
#define SIR 0x04 /* int: script: interrupt instruct. */
|
|
#define IID 0x01 /* int: script: illegal instruct. */
|
|
|
|
#define SSTAT0 0x0d
|
|
#define ILF 0x80 /* sta: data in SIDL register lsb */
|
|
#define ORF 0x40 /* sta: data in SODR register lsb */
|
|
#define OLF 0x20 /* sta: data in SODL register lsb */
|
|
#define AIP 0x10 /* sta: arbitration in progress */
|
|
#define LOA 0x08 /* sta: arbitration lost */
|
|
#define WOA 0x04 /* sta: arbitration won */
|
|
#define IRST 0x02 /* sta: scsi reset signal */
|
|
#define SDP 0x01 /* sta: scsi parity signal */
|
|
|
|
#define SSTAT1 0x0e
|
|
#define FF3210 0xf0 /* sta: bytes in the scsi fifo */
|
|
|
|
#define SSTAT2 0x0f
|
|
#define ILF1 0x80 /* sta: data in SIDL register msb[W]*/
|
|
#define ORF1 0x40 /* sta: data in SODR register msb[W]*/
|
|
#define OLF1 0x20 /* sta: data in SODL register msb[W]*/
|
|
#define DM 0x04 /* sta: DIFFSENS mismatch (895/6 only) */
|
|
#define LDSC 0x02 /* sta: disconnect & reconnect */
|
|
|
|
#define DSA 0x10 /* --> Base page */
|
|
#define DSA1 0x11
|
|
#define DSA2 0x12
|
|
#define DSA3 0x13
|
|
|
|
#define ISTAT 0x14 /* --> Main Command and status */
|
|
#define CABRT 0x80 /* cmd: abort current operation */
|
|
#define SRST 0x40 /* mod: reset chip */
|
|
#define SIGP 0x20 /* r/w: message from host to ncr */
|
|
#define SEM 0x10 /* r/w: message between host + ncr */
|
|
#define CON 0x08 /* sta: connected to scsi */
|
|
#define INTF 0x04 /* sta: int on the fly (reset by wr)*/
|
|
#define SIP 0x02 /* sta: scsi-interrupt */
|
|
#define DIP 0x01 /* sta: host/script interrupt */
|
|
|
|
|
|
#define CTEST0 0x18
|
|
#define CTEST1 0x19
|
|
#define CTEST2 0x1a
|
|
#define CSIGP 0x40
|
|
/* bits 0-2,7 rsvd for C1010 */
|
|
|
|
#define CTEST3 0x1b
|
|
#define FLF 0x08 /* cmd: flush dma fifo */
|
|
#define CLF 0x04 /* cmd: clear dma fifo */
|
|
#define FM 0x02 /* mod: fetch pin mode */
|
|
#define WRIE 0x01 /* mod: write and invalidate enable */
|
|
/* bits 4-7 rsvd for C1010 */
|
|
|
|
#define DFIFO 0x20
|
|
#define CTEST4 0x21
|
|
#define BDIS 0x80 /* mod: burst disable */
|
|
#define MPEE 0x08 /* mod: master parity error enable */
|
|
|
|
#define CTEST5 0x22
|
|
#define DFS 0x20 /* mod: dma fifo size */
|
|
/* bits 0-1, 3-7 rsvd for C1010 */
|
|
#define CTEST6 0x23
|
|
|
|
#define DBC 0x24 /* ### Byte count and command */
|
|
#define DNAD 0x28 /* ### Next command register */
|
|
#define DSP 0x2c /* --> Script Pointer */
|
|
#define DSPS 0x30 /* --> Script pointer save/opcode#2 */
|
|
|
|
#define SCRATCHA 0x34 /* Temporary register a */
|
|
#define SCRATCHA1 0x35
|
|
#define SCRATCHA2 0x36
|
|
#define SCRATCHA3 0x37
|
|
|
|
#define DMODE 0x38
|
|
#define BL_2 0x80 /* mod: burst length shift value +2 */
|
|
#define BL_1 0x40 /* mod: burst length shift value +1 */
|
|
#define ERL 0x08 /* mod: enable read line */
|
|
#define ERMP 0x04 /* mod: enable read multiple */
|
|
#define BOF 0x02 /* mod: burst op code fetch */
|
|
#define MAN 0x01 /* mod: manual start */
|
|
|
|
#define DIEN 0x39
|
|
#define SBR 0x3a
|
|
|
|
#define DCNTL 0x3b /* --> Script execution control */
|
|
#define CLSE 0x80 /* mod: cache line size enable */
|
|
#define PFF 0x40 /* cmd: pre-fetch flush */
|
|
#define PFEN 0x20 /* mod: pre-fetch enable */
|
|
#define SSM 0x10 /* mod: single step mode */
|
|
#define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */
|
|
#define STD 0x04 /* cmd: start dma mode */
|
|
#define IRQD 0x02 /* mod: irq disable */
|
|
#define NOCOM 0x01 /* cmd: protect sfbr while reselect */
|
|
/* bits 0-1 rsvd for C1010 */
|
|
|
|
#define ADDER 0x3c
|
|
|
|
#define SIEN 0x40 /* -->: interrupt enable */
|
|
#define SIST 0x42 /* <--: interrupt status */
|
|
#define SBMC 0x1000/* sta: SCSI Bus Mode Change (895/6 only) */
|
|
#define STO 0x0400/* sta: timeout (select) */
|
|
#define GEN 0x0200/* sta: timeout (general) */
|
|
#define HTH 0x0100/* sta: timeout (handshake) */
|
|
#define MA 0x80 /* sta: phase mismatch */
|
|
#define CMP 0x40 /* sta: arbitration complete */
|
|
#define SEL 0x20 /* sta: selected by another device */
|
|
#define RSL 0x10 /* sta: reselected by another device*/
|
|
#define SGE 0x08 /* sta: gross error (over/underflow)*/
|
|
#define UDC 0x04 /* sta: unexpected disconnect */
|
|
#define RST 0x02 /* sta: scsi bus reset detected */
|
|
#define PAR 0x01 /* sta: scsi parity error */
|
|
|
|
#define SLPAR 0x44
|
|
#define SWIDE 0x45
|
|
#define MACNTL 0x46
|
|
#define GPCNTL 0x47
|
|
#define STIME0 0x48 /* cmd: timeout for select&handshake*/
|
|
#define STIME1 0x49 /* cmd: timeout user defined */
|
|
#define RESPID 0x4a /* sta: Reselect-IDs */
|
|
|
|
#define STEST0 0x4c
|
|
|
|
#define STEST1 0x4d
|
|
#define SCLK 0x80 /* Use the PCI clock as SCSI clock */
|
|
#define DBLEN 0x08 /* clock doubler running */
|
|
#define DBLSEL 0x04 /* clock doubler selected */
|
|
|
|
|
|
#define STEST2 0x4e
|
|
#define ROF 0x40 /* reset scsi offset (after gross error!) */
|
|
#define EXT 0x02 /* extended filtering */
|
|
|
|
#define STEST3 0x4f
|
|
#define TE 0x80 /* c: tolerAnt enable */
|
|
#define HSC 0x20 /* c: Halt SCSI Clock */
|
|
#define CSF 0x02 /* c: clear scsi fifo */
|
|
|
|
#define SIDL 0x50 /* Lowlevel: latched from scsi data */
|
|
#define STEST4 0x52
|
|
#define SMODE 0xc0 /* SCSI bus mode (895/6 only) */
|
|
#define SMODE_HVD 0x40 /* High Voltage Differential */
|
|
#define SMODE_SE 0x80 /* Single Ended */
|
|
#define SMODE_LVD 0xc0 /* Low Voltage Differential */
|
|
#define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */
|
|
/* bits 0-5 rsvd for C1010 */
|
|
|
|
#define SODL 0x54 /* Lowlevel: data out to scsi data */
|
|
|
|
#define SBDL 0x58 /* Lowlevel: data from scsi data */
|
|
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** Utility macros for the script.
|
|
**
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define REG(r) (r)
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** SCSI phases
|
|
**
|
|
** DT phases illegal for ncr driver.
|
|
**
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define SCR_DATA_OUT 0x00000000
|
|
#define SCR_DATA_IN 0x01000000
|
|
#define SCR_COMMAND 0x02000000
|
|
#define SCR_STATUS 0x03000000
|
|
#define SCR_DT_DATA_OUT 0x04000000
|
|
#define SCR_DT_DATA_IN 0x05000000
|
|
#define SCR_MSG_OUT 0x06000000
|
|
#define SCR_MSG_IN 0x07000000
|
|
|
|
#define SCR_ILG_OUT 0x04000000
|
|
#define SCR_ILG_IN 0x05000000
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** Data transfer via SCSI.
|
|
**
|
|
**-----------------------------------------------------------
|
|
**
|
|
** MOVE_ABS (LEN)
|
|
** <<start address>>
|
|
**
|
|
** MOVE_IND (LEN)
|
|
** <<dnad_offset>>
|
|
**
|
|
** MOVE_TBL
|
|
** <<dnad_offset>>
|
|
**
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define OPC_MOVE 0x08000000
|
|
|
|
#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l))
|
|
#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l))
|
|
#define SCR_MOVE_TBL (0x10000000 | OPC_MOVE)
|
|
|
|
#define SCR_CHMOV_ABS(l) ((0x00000000) | (l))
|
|
#define SCR_CHMOV_IND(l) ((0x20000000) | (l))
|
|
#define SCR_CHMOV_TBL (0x10000000)
|
|
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** Selection
|
|
**
|
|
**-----------------------------------------------------------
|
|
**
|
|
** SEL_ABS | SCR_ID (0..15) [ | REL_JMP]
|
|
** <<alternate_address>>
|
|
**
|
|
** SEL_TBL | << dnad_offset>> [ | REL_JMP]
|
|
** <<alternate_address>>
|
|
**
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define SCR_SEL_ABS 0x40000000
|
|
#define SCR_SEL_ABS_ATN 0x41000000
|
|
#define SCR_SEL_TBL 0x42000000
|
|
#define SCR_SEL_TBL_ATN 0x43000000
|
|
|
|
|
|
#define SCR_JMP_REL 0x04000000
|
|
#define SCR_ID(id) (((unsigned long)(id)) << 16)
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** Waiting for Disconnect or Reselect
|
|
**
|
|
**-----------------------------------------------------------
|
|
**
|
|
** WAIT_DISC
|
|
** dummy: <<alternate_address>>
|
|
**
|
|
** WAIT_RESEL
|
|
** <<alternate_address>>
|
|
**
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define SCR_WAIT_DISC 0x48000000
|
|
#define SCR_WAIT_RESEL 0x50000000
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** Bit Set / Reset
|
|
**
|
|
**-----------------------------------------------------------
|
|
**
|
|
** SET (flags {|.. })
|
|
**
|
|
** CLR (flags {|.. })
|
|
**
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define SCR_SET(f) (0x58000000 | (f))
|
|
#define SCR_CLR(f) (0x60000000 | (f))
|
|
|
|
#define SCR_CARRY 0x00000400
|
|
#define SCR_TRG 0x00000200
|
|
#define SCR_ACK 0x00000040
|
|
#define SCR_ATN 0x00000008
|
|
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** Memory to memory move
|
|
**
|
|
**-----------------------------------------------------------
|
|
**
|
|
** COPY (bytecount)
|
|
** << source_address >>
|
|
** << destination_address >>
|
|
**
|
|
** SCR_COPY sets the NO FLUSH option by default.
|
|
** SCR_COPY_F does not set this option.
|
|
**
|
|
** For chips which do not support this option,
|
|
** ncr_copy_and_bind() will remove this bit.
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define SCR_NO_FLUSH 0x01000000
|
|
|
|
#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n))
|
|
#define SCR_COPY_F(n) (0xc0000000 | (n))
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** Register move and binary operations
|
|
**
|
|
**-----------------------------------------------------------
|
|
**
|
|
** SFBR_REG (reg, op, data) reg = SFBR op data
|
|
** << 0 >>
|
|
**
|
|
** REG_SFBR (reg, op, data) SFBR = reg op data
|
|
** << 0 >>
|
|
**
|
|
** REG_REG (reg, op, data) reg = reg op data
|
|
** << 0 >>
|
|
**
|
|
**-----------------------------------------------------------
|
|
** On 810A, 860, 825A, 875, 895 and 896 chips the content
|
|
** of SFBR register can be used as data (SCR_SFBR_DATA).
|
|
** The 896 has additionnal IO registers starting at
|
|
** offset 0x80. Bit 7 of register offset is stored in
|
|
** bit 7 of the SCRIPTS instruction first DWORD.
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul)) /* + ((ofs) & 0x80)) */
|
|
|
|
#define SCR_SFBR_REG(reg,op,data) \
|
|
(0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
|
|
|
|
#define SCR_REG_SFBR(reg,op,data) \
|
|
(0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
|
|
|
|
#define SCR_REG_REG(reg,op,data) \
|
|
(0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
|
|
|
|
|
|
#define SCR_LOAD 0x00000000
|
|
#define SCR_SHL 0x01000000
|
|
#define SCR_OR 0x02000000
|
|
#define SCR_XOR 0x03000000
|
|
#define SCR_AND 0x04000000
|
|
#define SCR_SHR 0x05000000
|
|
#define SCR_ADD 0x06000000
|
|
#define SCR_ADDC 0x07000000
|
|
|
|
#define SCR_SFBR_DATA (0x00800000>>8ul) /* Use SFBR as data */
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** FROM_REG (reg) SFBR = reg
|
|
** << 0 >>
|
|
**
|
|
** TO_REG (reg) reg = SFBR
|
|
** << 0 >>
|
|
**
|
|
** LOAD_REG (reg, data) reg = <data>
|
|
** << 0 >>
|
|
**
|
|
** LOAD_SFBR(data) SFBR = <data>
|
|
** << 0 >>
|
|
**
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define SCR_FROM_REG(reg) \
|
|
SCR_REG_SFBR(reg,SCR_OR,0)
|
|
|
|
#define SCR_TO_REG(reg) \
|
|
SCR_SFBR_REG(reg,SCR_OR,0)
|
|
|
|
#define SCR_LOAD_REG(reg,data) \
|
|
SCR_REG_REG(reg,SCR_LOAD,data)
|
|
|
|
#define SCR_LOAD_SFBR(data) \
|
|
(SCR_REG_SFBR (gpreg, SCR_LOAD, data))
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** LOAD from memory to register.
|
|
** STORE from register to memory.
|
|
**
|
|
** Only supported by 810A, 860, 825A, 875, 895 and 896.
|
|
**
|
|
**-----------------------------------------------------------
|
|
**
|
|
** LOAD_ABS (LEN)
|
|
** <<start address>>
|
|
**
|
|
** LOAD_REL (LEN) (DSA relative)
|
|
** <<dsa_offset>>
|
|
**
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul)
|
|
#define SCR_NO_FLUSH2 0x02000000
|
|
#define SCR_DSA_REL2 0x10000000
|
|
|
|
#define SCR_LOAD_R(reg, how, n) \
|
|
(0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
|
|
|
|
#define SCR_STORE_R(reg, how, n) \
|
|
(0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
|
|
|
|
#define SCR_LOAD_ABS(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2, n)
|
|
#define SCR_LOAD_REL(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n)
|
|
#define SCR_LOAD_ABS_F(reg, n) SCR_LOAD_R(reg, 0, n)
|
|
#define SCR_LOAD_REL_F(reg, n) SCR_LOAD_R(reg, SCR_DSA_REL2, n)
|
|
|
|
#define SCR_STORE_ABS(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2, n)
|
|
#define SCR_STORE_REL(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n)
|
|
#define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n)
|
|
#define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n)
|
|
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** Waiting for Disconnect or Reselect
|
|
**
|
|
**-----------------------------------------------------------
|
|
**
|
|
** JUMP [ | IFTRUE/IFFALSE ( ... ) ]
|
|
** <<address>>
|
|
**
|
|
** JUMPR [ | IFTRUE/IFFALSE ( ... ) ]
|
|
** <<distance>>
|
|
**
|
|
** CALL [ | IFTRUE/IFFALSE ( ... ) ]
|
|
** <<address>>
|
|
**
|
|
** CALLR [ | IFTRUE/IFFALSE ( ... ) ]
|
|
** <<distance>>
|
|
**
|
|
** RETURN [ | IFTRUE/IFFALSE ( ... ) ]
|
|
** <<dummy>>
|
|
**
|
|
** INT [ | IFTRUE/IFFALSE ( ... ) ]
|
|
** <<ident>>
|
|
**
|
|
** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ]
|
|
** <<ident>>
|
|
**
|
|
** Conditions:
|
|
** WHEN (phase)
|
|
** IF (phase)
|
|
** CARRYSET
|
|
** DATA (data, mask)
|
|
**
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define SCR_NO_OP 0x80000000
|
|
#define SCR_JUMP 0x80080000
|
|
#define SCR_JUMP64 0x80480000
|
|
#define SCR_JUMPR 0x80880000
|
|
#define SCR_CALL 0x88080000
|
|
#define SCR_CALLR 0x88880000
|
|
#define SCR_RETURN 0x90080000
|
|
#define SCR_INT 0x98080000
|
|
#define SCR_INT_FLY 0x98180000
|
|
|
|
#define IFFALSE(arg) (0x00080000 | (arg))
|
|
#define IFTRUE(arg) (0x00000000 | (arg))
|
|
|
|
#define WHEN(phase) (0x00030000 | (phase))
|
|
#define IF(phase) (0x00020000 | (phase))
|
|
|
|
#define DATA(D) (0x00040000 | ((D) & 0xff))
|
|
#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
|
|
|
|
#define CARRYSET (0x00200000)
|
|
|
|
|
|
#define SIR_COMPLETE 0x10000000
|
|
/* script errors */
|
|
#define SIR_SEL_ATN_NO_MSG_OUT 0x00000001
|
|
#define SIR_CMD_OUT_ILL_PH 0x00000002
|
|
#define SIR_STATUS_ILL_PH 0x00000003
|
|
#define SIR_MSG_RECEIVED 0x00000004
|
|
#define SIR_DATA_IN_ERR 0x00000005
|
|
#define SIR_DATA_OUT_ERR 0x00000006
|
|
#define SIR_SCRIPT_ERROR 0x00000007
|
|
#define SIR_MSG_OUT_NO_CMD 0x00000008
|
|
#define SIR_MSG_OVER7 0x00000009
|
|
/* Fly interrupt */
|
|
#define INT_ON_FY 0x00000080
|
|
|
|
/* Hardware errors are defined in scsi.h */
|
|
|
|
#define SCSI_IDENTIFY 0xC0
|
|
|
|
#ifndef TRUE
|
|
#define TRUE 1
|
|
#endif
|
|
#ifndef FALSE
|
|
#define FALSE 0
|
|
#endif
|
|
|
|
#endif
|