mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 18:28:55 +00:00
b62526282a
Add support for selecting the appropriate DTS file depending on the SERDES protocol used. The fsl-ls2088a-qds DTS will be used by default if there isn't a DTS file specifically made for the current SERDES protocol. This patch adds support for the on-board ports (DPMAC 1,2 and 4,5) found on the SERDES protocols 21(0x15) and 29(0x1d) for SD#1. On the LS1088AQDS board EMDIO1 is used with two onboard RGMII PHYs (Realtek RTL8211FD-CG), as well as 2 input/output connectors for mezzanine cards. Configuration signals from the Qixis FPGA control the routing of the external MDIOs. Register 0x54 of the Qixis FPGA controls the routing of the EMDIO1 one of the 2 IO slots. As a consequence, a new node is added to describe register 0x54 as a MDIO mux controlled with child nodes describing all the IO slots as MDIO buses. Also, in case CONFIG_DM_ETH and CONFIG_MULTI_DTB_FIT are enabled implement the board_fit_config_name_match() function in order to choose the appropriate DTS. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
186 lines
3.1 KiB
Text
186 lines
3.1 KiB
Text
// SPDX-License-Identifier: GPL-2.0+ OR X11
|
|
/*
|
|
* NXP ls1088a QDS common board device tree source
|
|
*
|
|
* Copyright 2017-2020 NXP
|
|
*/
|
|
|
|
#include "fsl-ls1088a.dtsi"
|
|
|
|
/ {
|
|
aliases {
|
|
spi0 = &qspi;
|
|
spi1 = &dspi;
|
|
};
|
|
};
|
|
|
|
&emdio1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&emdio2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
u-boot,dm-pre-reloc;
|
|
|
|
fpga@66 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "simple-mfd";
|
|
reg = <0x66>;
|
|
|
|
mux-mdio@54 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "mdio-mux-i2creg";
|
|
reg = <0x54>;
|
|
#mux-control-cells = <1>;
|
|
mux-reg-masks = <0x54 0xe0>; // reg 0x54, bits 7:5
|
|
mdio-parent-bus = <&emdio1>;
|
|
|
|
mdio@00 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x00>;
|
|
|
|
rgmii_phy1: ethernet-phy@1 {
|
|
reg = <0x1>;
|
|
};
|
|
};
|
|
mdio@20 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x20>;
|
|
|
|
rgmii_phy2: ethernet-phy@2 {
|
|
reg = <0x2>;
|
|
};
|
|
};
|
|
|
|
emdio1_slot1: mdio@40 { /* I/O Slot #1 */
|
|
reg = <0x40>;
|
|
device-name = "emdio1_slot1";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
emdio1_slot3: mdio@60 { /* I/O Slot #3 */
|
|
reg = <0x60>;
|
|
device-name = "emdio1_slot3";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c-mux@77 {
|
|
compatible = "nxp,pca9547";
|
|
reg = <0x77>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
i2c@3 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x3>;
|
|
|
|
rtc@51 {
|
|
compatible = "pcf2127-rtc";
|
|
reg = <0x51>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&ifc {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
/* NOR, NAND Flashes and FPGA on board */
|
|
ranges = <0 0 0x5 0x80000000 0x08000000
|
|
2 0 0x5 0x30000000 0x00010000
|
|
3 0 0x5 0x20000000 0x00010000>;
|
|
status = "okay";
|
|
|
|
nor@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x0 0x0 0x8000000>;
|
|
bank-width = <2>;
|
|
device-width = <1>;
|
|
};
|
|
|
|
nand@2,0 {
|
|
compatible = "fsl,ifc-nand";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x1 0x0 0x10000>;
|
|
};
|
|
|
|
fpga: board-control@3,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus", "fsl,ls1088aqds-fpga",
|
|
"fsl,fpga-qixis";
|
|
reg = <0x2 0x0 0x0000100>;
|
|
bank-width = <1>;
|
|
device-width = <1>;
|
|
ranges = <0 2 0 0x100>;
|
|
};
|
|
};
|
|
|
|
&dspi {
|
|
bus-num = <0>;
|
|
status = "okay";
|
|
|
|
dflash0: n25q128a {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <1000000>; /* input clock */
|
|
};
|
|
|
|
dflash1: sst25wf040b {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "jedec,spi-nor";
|
|
spi-max-frequency = <3500000>;
|
|
reg = <1>;
|
|
};
|
|
|
|
dflash2: en25s64 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "jedec,spi-nor";
|
|
spi-max-frequency = <3500000>;
|
|
reg = <2>;
|
|
};
|
|
};
|
|
|
|
&qspi {
|
|
status = "okay";
|
|
|
|
s25fs512s0: flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "jedec,spi-nor";
|
|
spi-max-frequency = <50000000>;
|
|
reg = <0>;
|
|
};
|
|
|
|
s25fs512s1: flash@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "jedec,spi-nor";
|
|
spi-max-frequency = <50000000>;
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
&sata {
|
|
status = "okay";
|
|
};
|