mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 06:12:58 +00:00
ae440ab02d
This commit adds support for the Toradex Computer on Modules Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence can be easily supported by one board. The board code detects RAM size at runtime which is one of the differences between the two boards. The board also uses the UART's in DTE mode, hence making use of the new DTE support via serial DM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
247 lines
7.1 KiB
C
247 lines
7.1 KiB
C
/*
|
|
* Copyright 2016 Toradex AG
|
|
*
|
|
* Configuration settings for the Colibri iMX7 module.
|
|
*
|
|
* based on mx7dsabresd.h:
|
|
* Copyright (C) 2015 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __COLIBRI_IMX7_CONFIG_H
|
|
#define __COLIBRI_IMX7_CONFIG_H
|
|
|
|
#include "mx7_common.h"
|
|
|
|
#define CONFIG_SYS_THUMB_BUILD
|
|
#define CONFIG_USE_ARCH_MEMCPY
|
|
#define CONFIG_USE_ARCH_MEMSET
|
|
|
|
/*#define CONFIG_DBG_MONITOR*/
|
|
#define PHYS_SDRAM_SIZE SZ_512M
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
#define CONFIG_BOARD_LATE_INIT
|
|
|
|
#define CONFIG_DISPLAY_BOARDINFO_LATE
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
|
|
|
|
/* Uncomment to enable secure boot support */
|
|
/* #define CONFIG_SECURE_BOOT */
|
|
#define CONFIG_CSF_SIZE 0x4000
|
|
|
|
#define CONFIG_CMD_BMODE
|
|
|
|
/* Network */
|
|
#define CONFIG_FEC_MXC
|
|
#define CONFIG_MII
|
|
#define CONFIG_FEC_XCV_TYPE RMII
|
|
#define CONFIG_ETHPRIME "FEC"
|
|
#define CONFIG_FEC_MXC_PHYADDR 0
|
|
|
|
#define CONFIG_PHYLIB
|
|
#define CONFIG_PHY_MICREL
|
|
#define CONFIG_TFTP_TSIZE
|
|
#define CONFIG_IP_DEFRAG
|
|
#define CONFIG_TFTP_BLOCKSIZE 16384
|
|
|
|
/* ENET1 */
|
|
#define IMX_FEC_BASE ENET_IPS_BASE_ADDR
|
|
|
|
/* MMC Config*/
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
#define CONFIG_SYS_FSL_USDHC_NUM 1
|
|
|
|
#undef CONFIG_BOOTM_PLAN9
|
|
#undef CONFIG_BOOTM_RTEMS
|
|
|
|
/* I2C configs */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
|
|
#define CONFIG_IPADDR 192.168.10.2
|
|
#define CONFIG_NETMASK 255.255.255.0
|
|
#define CONFIG_SERVERIP 192.168.10.1
|
|
|
|
#define MEM_LAYOUT_ENV_SETTINGS \
|
|
"fdt_addr_r=0x82000000\0" \
|
|
"fdt_high=0xffffffff\0" \
|
|
"initrd_high=0xffffffff\0" \
|
|
"kernel_addr_r=0x81000000\0" \
|
|
"ramdisk_addr_r=0x82100000\0"
|
|
|
|
#define SD_BOOTCMD \
|
|
"sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
|
|
"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
|
|
"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
|
|
"run m4boot && " \
|
|
"load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
|
|
"load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
|
|
"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
|
|
|
|
#define NFS_BOOTCMD \
|
|
"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
|
|
"nfsboot=run setup; " \
|
|
"setenv bootargs ${defargs} ${nfsargs} " \
|
|
"${setupargs} ${vidargs}; echo Booting from NFS...;" \
|
|
"dhcp ${kernel_addr_r} && " \
|
|
"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
|
|
"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
|
|
|
|
#define UBI_BOOTCMD \
|
|
"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
|
|
"ubi.fm_autoconvert=1\0" \
|
|
"ubiboot=run setup; " \
|
|
"setenv bootargs ${defargs} ${ubiargs} " \
|
|
"${setupargs} ${vidargs}; echo Booting from NAND...; " \
|
|
"ubi part ubi && run m4boot && " \
|
|
"ubi read ${kernel_addr_r} kernel && " \
|
|
"ubi read ${fdt_addr_r} dtb && " \
|
|
"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
|
|
|
|
#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
MEM_LAYOUT_ENV_SETTINGS \
|
|
NFS_BOOTCMD \
|
|
SD_BOOTCMD \
|
|
UBI_BOOTCMD \
|
|
"console=ttymxc0\0" \
|
|
"defargs=\0" \
|
|
"fdt_board=eval-v3\0" \
|
|
"fdt_fixup=;\0" \
|
|
"m4boot=;\0" \
|
|
"ip_dyn=yes\0" \
|
|
"kernel_file=zImage\0" \
|
|
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
|
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
|
|
"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
|
|
"${board}/flash_eth.img && source ${loadaddr}\0" \
|
|
"setsdupdate=mmc rescan && setenv interface mmc && " \
|
|
"fatload ${interface} 0:1 ${loadaddr} " \
|
|
"${board}/flash_blk.img && source ${loadaddr}\0" \
|
|
"setup=setenv setupargs " \
|
|
"console=tty1 console=${console}" \
|
|
",${baudrate}n8 ${memargs} consoleblank=0 ${mtdparts}\0" \
|
|
"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
|
|
"setusbupdate=usb start && setenv interface usb && " \
|
|
"fatload ${interface} 0:1 ${loadaddr} " \
|
|
"${board}/flash_blk.img && source ${loadaddr}\0" \
|
|
"splashpos=m,m\0" \
|
|
"videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
|
|
|
|
/* Miscellaneous configurable options */
|
|
#define CONFIG_SYS_LONGHELP
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x80000000
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x0c000000)
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
#define CONFIG_STACKSIZE SZ_128K
|
|
|
|
/* Physical Memory Map */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/* FLASH and environment organization */
|
|
#define CONFIG_SYS_NO_FLASH
|
|
#define CONFIG_ENV_IS_IN_NAND
|
|
|
|
#if defined(CONFIG_ENV_IS_IN_MMC)
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */
|
|
#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
|
|
#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
|
|
#define CONFIG_ENV_OFFSET (8 * SZ_64K)
|
|
#elif defined(CONFIG_ENV_IS_IN_NAND)
|
|
#define CONFIG_ENV_OFFSET (4 * 1024 * 1024)
|
|
#define CONFIG_ENV_SECT_SIZE (128 * 1024)
|
|
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
|
|
#endif
|
|
|
|
#define CONFIG_NAND_MXS
|
|
#define CONFIG_CMD_NAND_TRIMFFS
|
|
|
|
/* NAND stuff */
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
#define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
|
|
#define CONFIG_CMD_NAND_TORTURE
|
|
|
|
/* UBI stuff */
|
|
#define CONFIG_RBTREE
|
|
#define CONFIG_LZO
|
|
#define CONFIG_CMD_UBI
|
|
#define CONFIG_MTD_UBI_FASTMAP
|
|
#define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
|
|
|
|
/* Dynamic MTD partition support */
|
|
#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
|
|
#define CONFIG_MTD_PARTITIONS
|
|
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
|
|
#define MTDIDS_DEFAULT "nand0=gpmi-nand"
|
|
#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:" \
|
|
"512k(mx7-bcb)," \
|
|
"3584k(u-boot)ro," \
|
|
"512k(u-boot-env)," \
|
|
"-(ubi)"
|
|
|
|
/* DMA stuff, needed for GPMI/MXS NAND support */
|
|
#define CONFIG_APBH_DMA
|
|
#define CONFIG_APBH_DMA_BURST
|
|
#define CONFIG_APBH_DMA_BURST8
|
|
|
|
/* USB Configs */
|
|
#define CONFIG_USB_STORAGE
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
|
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#define CONFIG_MXC_USB_FLAGS 0
|
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
|
|
|
#define CONFIG_IMX_THERMAL
|
|
|
|
#define CONFIG_USBD_HS
|
|
|
|
#define CONFIG_USB_FUNCTION_MASS_STORAGE
|
|
|
|
/* USB Device Firmware Update support */
|
|
#define CONFIG_USB_FUNCTION_DFU
|
|
#define CONFIG_DFU_MMC
|
|
#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
|
|
#define DFU_DEFAULT_POLL_TIMEOUT 300
|
|
|
|
#define CONFIG_VIDEO
|
|
#ifdef CONFIG_VIDEO
|
|
#define CONFIG_CFB_CONSOLE
|
|
#define CONFIG_VIDEO_MXS
|
|
#define CONFIG_VIDEO_LOGO
|
|
#define CONFIG_VIDEO_SW_CURSOR
|
|
#define CONFIG_VGA_AS_SINGLE_DEVICE
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
|
#define CONFIG_SPLASH_SCREEN
|
|
#define CONFIG_SPLASH_SCREEN_ALIGN
|
|
#define CONFIG_CMD_BMP
|
|
#define CONFIG_BMP_16BPP
|
|
#define CONFIG_VIDEO_BMP_RLE8
|
|
#define CONFIG_VIDEO_BMP_LOGO
|
|
#endif
|
|
|
|
#endif
|