mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 11:33:32 +00:00
36a4dae18f
There are a handful of variants around CONFIG_SYS_USE_DATAFLASH and none of them now control anything further within their board config.h files, so remove these from CONFIG_SYS_EXTRA_OPTIONS and then remove the empty blocks in the board config.h files. In a few places further clean up related logic. Signed-off-by: Tom Rini <trini@konsulko.com>
208 lines
6.8 KiB
C
208 lines
6.8 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2007-2008
|
|
* Stelian Pop <stelian@popies.net>
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
|
* Ilko Iliev <www.ronetix.at>
|
|
*
|
|
* Configuration settings for the RONETIX PM9263 board.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* SoC must be defined first, before hardware.h is included.
|
|
* In this case SoC is defined in boards.cfg.
|
|
*/
|
|
#include <asm/hardware.h>
|
|
|
|
/* ARM asynchronous clock */
|
|
|
|
#define MASTER_PLL_DIV 6
|
|
#define MASTER_PLL_MUL 65
|
|
#define MAIN_PLL_DIV 2 /* 2 or 4 */
|
|
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000
|
|
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
|
|
|
|
/* clocks */
|
|
#define CONFIG_SYS_MOR_VAL \
|
|
(AT91_PMC_MOR_MOSCEN | \
|
|
(255 << 8)) /* Main Oscillator Start-up Time */
|
|
#define CONFIG_SYS_PLLAR_VAL \
|
|
(AT91_PMC_PLLAR_29 | /* Bit 29 must be 1 when prog */ \
|
|
AT91_PMC_PLLXR_OUT(3) | \
|
|
AT91_PMC_PLLXR_PLLCOUNT(0x3f) | /* PLL Counter */\
|
|
(2 << 28) | /* PLL Clock Frequency Range */ \
|
|
((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
|
|
|
|
#if (MAIN_PLL_DIV == 2)
|
|
/* PCK/2 = MCK Master Clock from PLLA */
|
|
#define CONFIG_SYS_MCKR1_VAL \
|
|
(AT91_PMC_MCKR_CSS_SLOW | \
|
|
AT91_PMC_MCKR_PRES_1 | \
|
|
AT91_PMC_MCKR_MDIV_2)
|
|
/* PCK/2 = MCK Master Clock from PLLA */
|
|
#define CONFIG_SYS_MCKR2_VAL \
|
|
(AT91_PMC_MCKR_CSS_PLLA | \
|
|
AT91_PMC_MCKR_PRES_1 | \
|
|
AT91_PMC_MCKR_MDIV_2)
|
|
#else
|
|
/* PCK/4 = MCK Master Clock from PLLA */
|
|
#define CONFIG_SYS_MCKR1_VAL \
|
|
(AT91_PMC_MCKR_CSS_SLOW | \
|
|
AT91_PMC_MCKR_PRES_1 | \
|
|
AT91_PMC_MCKR_MDIV_4)
|
|
/* PCK/4 = MCK Master Clock from PLLA */
|
|
#define CONFIG_SYS_MCKR2_VAL \
|
|
(AT91_PMC_MCKR_CSS_PLLA | \
|
|
AT91_PMC_MCKR_PRES_1 | \
|
|
AT91_PMC_MCKR_MDIV_4)
|
|
#endif
|
|
/* define PDC[31:16] as DATA[31:16] */
|
|
#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000
|
|
/* no pull-up for D[31:16] */
|
|
#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000
|
|
/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
|
|
#define CONFIG_SYS_MATRIX_EBI0CSA_VAL \
|
|
(AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \
|
|
AT91_MATRIX_CSA_EBI_CS1A)
|
|
|
|
/* SDRAM */
|
|
/* SDRAMC_MR Mode register */
|
|
#define CONFIG_SYS_SDRC_MR_VAL1 0
|
|
/* SDRAMC_TR - Refresh Timer register */
|
|
#define CONFIG_SYS_SDRC_TR_VAL1 0x3AA
|
|
/* SDRAMC_CR - Configuration register*/
|
|
#define CONFIG_SYS_SDRC_CR_VAL \
|
|
(AT91_SDRAMC_NC_9 | \
|
|
AT91_SDRAMC_NR_13 | \
|
|
AT91_SDRAMC_NB_4 | \
|
|
AT91_SDRAMC_CAS_2 | \
|
|
AT91_SDRAMC_DBW_32 | \
|
|
(2 << 8) | /* tWR - Write Recovery Delay */ \
|
|
(7 << 12) | /* tRC - Row Cycle Delay */ \
|
|
(2 << 16) | /* tRP - Row Precharge Delay */ \
|
|
(2 << 20) | /* tRCD - Row to Column Delay */ \
|
|
(5 << 24) | /* tRAS - Active to Precharge Delay */ \
|
|
(8 << 28)) /* tXSR - Exit Self Refresh to Active Delay */
|
|
|
|
/* Memory Device Register -> SDRAM */
|
|
#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM
|
|
#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE
|
|
#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH
|
|
#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR
|
|
#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL
|
|
#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */
|
|
#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */
|
|
|
|
/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
|
|
#define CONFIG_SYS_SMC0_SETUP0_VAL \
|
|
(AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \
|
|
AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10))
|
|
#define CONFIG_SYS_SMC0_PULSE0_VAL \
|
|
(AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \
|
|
AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11))
|
|
#define CONFIG_SYS_SMC0_CYCLE0_VAL \
|
|
(AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22))
|
|
#define CONFIG_SYS_SMC0_MODE0_VAL \
|
|
(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \
|
|
AT91_SMC_MODE_DBW_16 | \
|
|
AT91_SMC_MODE_TDF | \
|
|
AT91_SMC_MODE_TDF_CYCLE(6))
|
|
|
|
/* user reset enable */
|
|
#define CONFIG_SYS_RSTC_RMR_VAL \
|
|
(AT91_RSTC_KEY | \
|
|
AT91_RSTC_CR_PROCRST | \
|
|
AT91_RSTC_MR_ERSTL(1) | \
|
|
AT91_RSTC_MR_ERSTL(2))
|
|
|
|
/* Disable Watchdog */
|
|
#define CONFIG_SYS_WDTC_WDMR_VAL \
|
|
(AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \
|
|
AT91_WDT_MR_WDV(0xfff) | \
|
|
AT91_WDT_MR_WDDIS | \
|
|
AT91_WDT_MR_WDD(0xfff))
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
/* LCD */
|
|
#define LCD_BPP LCD_COLOR8
|
|
|
|
/* SDRAM */
|
|
#define PHYS_SDRAM 0x20000000
|
|
#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
|
|
|
|
/* NOR flash, if populated */
|
|
#define PHYS_FLASH_1 0x10000000
|
|
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 256
|
|
|
|
/* NAND flash */
|
|
#ifdef CONFIG_CMD_NAND
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
|
#define CONFIG_SYS_NAND_DBW_8 1
|
|
/* our ALE is AD21 */
|
|
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
|
|
/* our CLE is AD22 */
|
|
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
|
|
#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15)
|
|
#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PB(30)
|
|
|
|
#endif
|
|
|
|
/* PSRAM */
|
|
#define PHYS_PSRAM 0x70000000
|
|
#define PHYS_PSRAM_SIZE 0x00400000 /* 4MB */
|
|
/* Slave EBI1, PSRAM connected */
|
|
#define CONFIG_PSRAM_SCFG (AT91_MATRIX_SCFG_ARBT_FIXED_PRIORITY | \
|
|
AT91_MATRIX_SCFG_FIXED_DEFMSTR(5) | \
|
|
AT91_MATRIX_SCFG_DEFMSTR_TYPE_FIXED | \
|
|
AT91_MATRIX_SCFG_SLOT_CYCLE(255))
|
|
|
|
/* USB */
|
|
#define CONFIG_USB_ATMEL
|
|
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
|
|
#define CONFIG_USB_OHCI_NEW 1
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
|
|
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
|
|
"partition=nand0,0\0" \
|
|
"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"fbcon=rotate:3 " \
|
|
"nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \
|
|
"addip=setenv bootargs $(bootargs) " \
|
|
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\
|
|
":$(hostname):eth0:off\0" \
|
|
"ramboot=tftpboot 0x22000000 vmImage;" \
|
|
"run ramargs;run addip;bootm 22000000\0" \
|
|
"nfsboot=tftpboot 0x22000000 vmImage;" \
|
|
"run nfsargs;run addip;bootm 22000000\0" \
|
|
"flashboot=run ramargs;run addip;bootm 0x10050000\0" \
|
|
""
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
|
|
#endif
|