mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 11:33:32 +00:00
2395625209
The GW74xx is based on the i.MX 8M Plus SoC featuring:
- LPDDR4 DRAM
- eMMC FLASH
- Gateworks System Controller
- PCIe Gen 3.0 switch (build option)
- USB 3.0 HUB
- USB Type-C front panel connector
- GPS
- 3-axis accelerometer
- CAN bus
- 6x GbE RJ45 front-panel jacks
- 1x IMX8M FEC RGMII GbE (with Passive PoE)
- 5x IMX8M EQOS RGMII 6 port GbE Switch
(1x with 802.3af class 5 Active PoE)
- RS232/RS485/RS422 serial transceiver
- MIPI header (DSI/CSI/GPIO/PWM/I2S)
- DigI/O header (UART/GPIO/I2C/ADC)
- 802.11ac WiFi
- Bluetooth BLE
- 3x MiniPCIe sockets with PCI/USB
- 1x M.2 Socket with USB2.0, PCIe, and dual-SIM
- PMIC
- Wide range DC input supply (8V to 60V DC)
Do the following to add support for this and future imx8mp-venice boards:
- add dts
- add DRAM config
- add PMIC config
- add IMX8MP support in spl.c and venice.c
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
109 lines
3.2 KiB
C
109 lines
3.2 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2022 Gateworks Corporation
|
|
*/
|
|
|
|
#ifndef __IMX8MP_VENICE_H
|
|
#define __IMX8MP_VENICE_H
|
|
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <linux/sizes.h>
|
|
|
|
#define CONFIG_SPL_MAX_SIZE (152 * 1024)
|
|
#define CONFIG_SYS_MONITOR_LEN SZ_512K
|
|
#define CONFIG_SYS_UBOOT_BASE \
|
|
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_SPL_STACK 0x960000
|
|
#define CONFIG_SPL_BSS_START_ADDR 0x0098FC00
|
|
#define CONFIG_SPL_BSS_MAX_SIZE 0x400 /* 1 KB */
|
|
#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */
|
|
|
|
/* For RAW image gives a error info not panic */
|
|
#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
|
|
#endif
|
|
|
|
#define MEM_LAYOUT_ENV_SETTINGS \
|
|
"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
|
|
"fdt_addr_r=0x50200000\0" \
|
|
"scriptaddr=0x50280000\0" \
|
|
"ramdisk_addr_r=0x50300000\0" \
|
|
"kernel_comp_addr_r=0x40200000\0"
|
|
|
|
/* Enable Distro Boot */
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(MMC, mmc, 1) \
|
|
func(MMC, mmc, 2) \
|
|
func(USB, usb, 0) \
|
|
func(DHCP, dhcp, na)
|
|
#include <config_distro_bootcmd.h>
|
|
#else
|
|
#define BOOTENV
|
|
#endif
|
|
|
|
/* Initial environment variables */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
BOOTENV \
|
|
MEM_LAYOUT_ENV_SETTINGS \
|
|
"script=boot.scr\0" \
|
|
"bootm_size=0x10000000\0" \
|
|
"dev=2\0" \
|
|
"preboot=gsc wd-disable\0" \
|
|
"console=ttymxc1,115200\0" \
|
|
"update_firmware=" \
|
|
"tftpboot $loadaddr $image && " \
|
|
"setexpr blkcnt $filesize + 0x1ff && " \
|
|
"setexpr blkcnt $blkcnt / 0x200 && " \
|
|
"mmc dev $dev && " \
|
|
"mmc write $loadaddr 0x40 $blkcnt\0" \
|
|
"loadfdt=" \
|
|
"if $fsload $fdt_addr_r $dir/$fdt_file1; " \
|
|
"then echo loaded $fdt_file1; " \
|
|
"elif $fsload $fdt_addr_r $dir/$fdt_file2; " \
|
|
"then echo loaded $fdt_file2; " \
|
|
"elif $fsload $fdt_addr_r $dir/$fdt_file3; " \
|
|
"then echo loaded $fdt_file3; " \
|
|
"elif $fsload $fdt_addr_r $dir/$fdt_file4; " \
|
|
"then echo loaded $fdt_file4; " \
|
|
"elif $fsload $fdt_addr_r $dir/$fdt_file5; " \
|
|
"then echo loaded $fdt_file5; " \
|
|
"fi\0" \
|
|
"boot_net=" \
|
|
"setenv fsload tftpboot; " \
|
|
"run loadfdt && tftpboot $kernel_addr_r $dir/Image && " \
|
|
"booti $kernel_addr_r - $fdt_addr_r\0" \
|
|
"update_rootfs=" \
|
|
"tftpboot $loadaddr $image && " \
|
|
"gzwrite mmc $dev $loadaddr $filesize 100000 1000000\0" \
|
|
"update_all=" \
|
|
"tftpboot $loadaddr $image && " \
|
|
"gzwrite mmc $dev $loadaddr $filesize\0" \
|
|
"erase_env=mmc dev $dev; mmc erase 0x7f08 0x40\0"
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
|
|
#define CONFIG_SYS_INIT_RAM_SIZE SZ_2M
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x40000000
|
|
|
|
/* SDRAM configuration */
|
|
#define PHYS_SDRAM 0x40000000
|
|
#define PHYS_SDRAM_SIZE SZ_4G
|
|
#define CONFIG_SYS_BOOTM_LEN SZ_256M
|
|
|
|
/* UART */
|
|
#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
|
|
|
|
/* Monitor Command Prompt */
|
|
#define CONFIG_SYS_CBSIZE SZ_2K
|
|
#define CONFIG_SYS_MAXARGS 64
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#endif
|