mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 22:33:18 +00:00
0e146993bb
The spi bitbanging driver did not implement all spi modes properly. Add code to support all spi modes, honoring soft_spi_set_mode() and defaulting to spi mode 0. Previously, CPHA was implemented inversely (defaulting to CPHA=1) and CPOL=1 was hardcoded. Signed-off-by: Johannes Holland <johannes.holland@infineon.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
287 lines
6.7 KiB
C
287 lines
6.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2014 Google, Inc
|
|
*
|
|
* (C) Copyright 2002
|
|
* Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
|
|
*
|
|
* Influenced by code from:
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <asm/gpio.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct soft_spi_platdata {
|
|
struct gpio_desc cs;
|
|
struct gpio_desc sclk;
|
|
struct gpio_desc mosi;
|
|
struct gpio_desc miso;
|
|
int spi_delay_us;
|
|
int flags;
|
|
};
|
|
|
|
#define SPI_MASTER_NO_RX BIT(0)
|
|
#define SPI_MASTER_NO_TX BIT(1)
|
|
|
|
struct soft_spi_priv {
|
|
unsigned int mode;
|
|
};
|
|
|
|
static int soft_spi_scl(struct udevice *dev, int bit)
|
|
{
|
|
struct udevice *bus = dev_get_parent(dev);
|
|
struct soft_spi_platdata *plat = dev_get_platdata(bus);
|
|
|
|
dm_gpio_set_value(&plat->sclk, bit);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int soft_spi_sda(struct udevice *dev, int bit)
|
|
{
|
|
struct udevice *bus = dev_get_parent(dev);
|
|
struct soft_spi_platdata *plat = dev_get_platdata(bus);
|
|
|
|
dm_gpio_set_value(&plat->mosi, bit);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int soft_spi_cs_activate(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev_get_parent(dev);
|
|
struct soft_spi_priv *priv = dev_get_priv(bus);
|
|
struct soft_spi_platdata *plat = dev_get_platdata(bus);
|
|
int cidle = !!(priv->mode & SPI_CPOL);
|
|
|
|
dm_gpio_set_value(&plat->cs, 0);
|
|
dm_gpio_set_value(&plat->sclk, cidle); /* to idle */
|
|
dm_gpio_set_value(&plat->cs, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int soft_spi_cs_deactivate(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev_get_parent(dev);
|
|
struct soft_spi_platdata *plat = dev_get_platdata(bus);
|
|
|
|
dm_gpio_set_value(&plat->cs, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int soft_spi_claim_bus(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev_get_parent(dev);
|
|
struct soft_spi_priv *priv = dev_get_priv(bus);
|
|
int cidle = !!(priv->mode & SPI_CPOL);
|
|
/*
|
|
* Make sure the SPI clock is in idle state as defined for
|
|
* this slave.
|
|
*/
|
|
return soft_spi_scl(dev, cidle);
|
|
}
|
|
|
|
static int soft_spi_release_bus(struct udevice *dev)
|
|
{
|
|
/* Nothing to do */
|
|
return 0;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SPI transfer
|
|
*
|
|
* This writes "bitlen" bits out the SPI MOSI port and simultaneously clocks
|
|
* "bitlen" bits in the SPI MISO port. That's just the way SPI works.
|
|
*
|
|
* The source of the outgoing bits is the "dout" parameter and the
|
|
* destination of the input bits is the "din" parameter. Note that "dout"
|
|
* and "din" can point to the same memory location, in which case the
|
|
* input data overwrites the output data (since both are buffered by
|
|
* temporary variables, this is OK).
|
|
*/
|
|
static int soft_spi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct udevice *bus = dev_get_parent(dev);
|
|
struct soft_spi_priv *priv = dev_get_priv(bus);
|
|
struct soft_spi_platdata *plat = dev_get_platdata(bus);
|
|
uchar tmpdin = 0;
|
|
uchar tmpdout = 0;
|
|
const u8 *txd = dout;
|
|
u8 *rxd = din;
|
|
int cpha = !!(priv->mode & SPI_CPHA);
|
|
int cidle = !!(priv->mode & SPI_CPOL);
|
|
unsigned int j;
|
|
|
|
debug("spi_xfer: slave %s:%s dout %08X din %08X bitlen %u\n",
|
|
dev->parent->name, dev->name, *(uint *)txd, *(uint *)rxd,
|
|
bitlen);
|
|
|
|
if (flags & SPI_XFER_BEGIN)
|
|
soft_spi_cs_activate(dev);
|
|
|
|
for (j = 0; j < bitlen; j++) {
|
|
/*
|
|
* Check if it is time to work on a new byte.
|
|
*/
|
|
if ((j % 8) == 0) {
|
|
if (txd)
|
|
tmpdout = *txd++;
|
|
else
|
|
tmpdout = 0;
|
|
if (j != 0) {
|
|
if (rxd)
|
|
*rxd++ = tmpdin;
|
|
}
|
|
tmpdin = 0;
|
|
}
|
|
|
|
/*
|
|
* CPOL 0: idle is low (0), active is high (1)
|
|
* CPOL 1: idle is high (1), active is low (0)
|
|
*/
|
|
|
|
/*
|
|
* drive bit
|
|
* CPHA 1: CLK from idle to active
|
|
*/
|
|
if (cpha)
|
|
soft_spi_scl(dev, !cidle);
|
|
if ((plat->flags & SPI_MASTER_NO_TX) == 0)
|
|
soft_spi_sda(dev, !!(tmpdout & 0x80));
|
|
udelay(plat->spi_delay_us);
|
|
|
|
/*
|
|
* sample bit
|
|
* CPHA 0: CLK from idle to active
|
|
* CPHA 1: CLK from active to idle
|
|
*/
|
|
if (!cpha)
|
|
soft_spi_scl(dev, !cidle);
|
|
else
|
|
soft_spi_scl(dev, cidle);
|
|
tmpdin <<= 1;
|
|
if ((plat->flags & SPI_MASTER_NO_RX) == 0)
|
|
tmpdin |= dm_gpio_get_value(&plat->miso);
|
|
tmpdout <<= 1;
|
|
udelay(plat->spi_delay_us);
|
|
|
|
/*
|
|
* drive bit
|
|
* CPHA 0: CLK from active to idle
|
|
*/
|
|
if (!cpha)
|
|
soft_spi_scl(dev, cidle);
|
|
}
|
|
/*
|
|
* If the number of bits isn't a multiple of 8, shift the last
|
|
* bits over to left-justify them. Then store the last byte
|
|
* read in.
|
|
*/
|
|
if (rxd) {
|
|
if ((bitlen % 8) != 0)
|
|
tmpdin <<= 8 - (bitlen % 8);
|
|
*rxd++ = tmpdin;
|
|
}
|
|
|
|
if (flags & SPI_XFER_END)
|
|
soft_spi_cs_deactivate(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int soft_spi_set_speed(struct udevice *dev, unsigned int speed)
|
|
{
|
|
/* Ignore any speed settings. Speed is implemented via "spi-delay-us" */
|
|
return 0;
|
|
}
|
|
|
|
static int soft_spi_set_mode(struct udevice *dev, unsigned int mode)
|
|
{
|
|
struct soft_spi_priv *priv = dev_get_priv(dev);
|
|
|
|
priv->mode = mode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops soft_spi_ops = {
|
|
.claim_bus = soft_spi_claim_bus,
|
|
.release_bus = soft_spi_release_bus,
|
|
.xfer = soft_spi_xfer,
|
|
.set_speed = soft_spi_set_speed,
|
|
.set_mode = soft_spi_set_mode,
|
|
};
|
|
|
|
static int soft_spi_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct soft_spi_platdata *plat = dev->platdata;
|
|
const void *blob = gd->fdt_blob;
|
|
int node = dev_of_offset(dev);
|
|
|
|
plat->spi_delay_us = fdtdec_get_int(blob, node, "spi-delay-us", 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int soft_spi_probe(struct udevice *dev)
|
|
{
|
|
struct spi_slave *slave = dev_get_parent_priv(dev);
|
|
struct soft_spi_platdata *plat = dev->platdata;
|
|
int cs_flags, clk_flags;
|
|
int ret;
|
|
|
|
cs_flags = (slave && slave->mode & SPI_CS_HIGH) ? 0 : GPIOD_ACTIVE_LOW;
|
|
clk_flags = (slave && slave->mode & SPI_CPOL) ? GPIOD_ACTIVE_LOW : 0;
|
|
|
|
if (gpio_request_by_name(dev, "cs-gpios", 0, &plat->cs,
|
|
GPIOD_IS_OUT | cs_flags) ||
|
|
gpio_request_by_name(dev, "gpio-sck", 0, &plat->sclk,
|
|
GPIOD_IS_OUT | clk_flags))
|
|
return -EINVAL;
|
|
|
|
ret = gpio_request_by_name(dev, "gpio-mosi", 0, &plat->mosi,
|
|
GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
|
|
if (ret)
|
|
plat->flags |= SPI_MASTER_NO_TX;
|
|
|
|
ret = gpio_request_by_name(dev, "gpio-miso", 0, &plat->miso,
|
|
GPIOD_IS_IN);
|
|
if (ret)
|
|
plat->flags |= SPI_MASTER_NO_RX;
|
|
|
|
if ((plat->flags & (SPI_MASTER_NO_RX | SPI_MASTER_NO_TX)) ==
|
|
(SPI_MASTER_NO_RX | SPI_MASTER_NO_TX))
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id soft_spi_ids[] = {
|
|
{ .compatible = "spi-gpio" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(soft_spi) = {
|
|
.name = "soft_spi",
|
|
.id = UCLASS_SPI,
|
|
.of_match = soft_spi_ids,
|
|
.ops = &soft_spi_ops,
|
|
.ofdata_to_platdata = soft_spi_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct soft_spi_platdata),
|
|
.priv_auto_alloc_size = sizeof(struct soft_spi_priv),
|
|
.probe = soft_spi_probe,
|
|
};
|