Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-16 17:58:23 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/a4m072/a4m072.c
Ilya Yanok 8f54dd4f13 a4m072: change 'display' command implementation 
This patch changes implementation of 'display' command for a4m072
that uses 7-segment LED display as customer requested:

a) The "display" command shall _not_ turn on the decimal point.

b) Exception: "display ." shall turn on (only) the decimal point.

c) Hex digits (0-9, A-F, a-f) shall be displayed as usual.

d) Letters U, P, Y, L, S, T, H shall be displayed as usual (lower
   case letters identical to upper case letters)

e) 'I' (and 'i') shall be displayed like '1'

f) 'O' (and 'o') shall be displayed like '0'

g) all other Characters shall be displayed like ' ' (all segments off).

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2010-10-21 22:16:31 +02:00

490 lines
12 KiB
C
Raw Blame History

/*
* (C) Copyright 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2004
* Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
*
* (C) Copyright 2010
* Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <mpc5xxx.h>
#include <pci.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <libfdt.h>
#include <netdev.h>
#include <led-display.h>
#include <linux/err.h>
#include "mt46v32m16.h"
#ifndef CONFIG_SYS_RAMBOOT
static void sdram_start (int hi_addr)
{
long hi_addr_bit = hi_addr ? 0x01000000 : 0;
long control = SDRAM_CONTROL | hi_addr_bit;
/* unlock mode register */
out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000000);
__asm__ volatile ("sync");
/* precharge all banks */
out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000002);
__asm__ volatile ("sync");
#if SDRAM_DDR
/* set mode register: extended mode */
out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_EMODE);
__asm__ volatile ("sync");
/* set mode register: reset DLL */
out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_MODE | 0x04000000);
__asm__ volatile ("sync");
#endif
/* precharge all banks */
out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000002);
__asm__ volatile ("sync");
/* auto refresh */
out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000004);
__asm__ volatile ("sync");
/* set mode register */
out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_MODE);
__asm__ volatile ("sync");
/* normal operation */
out_be32((void *)MPC5XXX_SDRAM_CTRL, control);
__asm__ volatile ("sync");
}
#endif
/*
* ATTENTION: Although partially referenced initdram does NOT make real use
* use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
* is something else than 0x00000000.
*/
phys_size_t initdram (int board_type)
{
ulong dramsize = 0;
uint svr, pvr;
#ifndef CONFIG_SYS_RAMBOOT
ulong test1, test2;
/* setup SDRAM chip selects */
out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0x0000001e); /* 2GB at 0x0 */
out_be32((void *)MPC5XXX_SDRAM_CS1CFG, 0x80000000); /* disabled */
__asm__ volatile ("sync");
/* setup config registers */
out_be32((void *)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1);
out_be32((void *)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2);
__asm__ volatile ("sync");
#if SDRAM_DDR
/* set tap delay */
out_be32((void *)MPC5XXX_CDM_PORCFG, SDRAM_TAPDELAY);
__asm__ volatile ("sync");
#endif
/* find RAM size using SDRAM CS0 only */
sdram_start(0);
test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
sdram_start(1);
test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
if (test1 > test2) {
sdram_start(0);
dramsize = test1;
} else {
dramsize = test2;
}
/* memory smaller than 1MB is impossible */
if (dramsize < (1 << 20)) {
dramsize = 0;
}
/* set SDRAM CS0 size according to the amount of RAM found */
if (dramsize > 0) {
out_be32((void *)MPC5XXX_SDRAM_CS0CFG,
0x13 + __builtin_ffs(dramsize >> 20) - 1);
} else {
out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0); /* disabled */
}
#else /* CONFIG_SYS_RAMBOOT */
/* retrieve size of memory connected to SDRAM CS0 */
dramsize = in_be32((void *)MPC5XXX_SDRAM_CS0CFG) & 0xFF;
if (dramsize >= 0x13) {
dramsize = (1 << (dramsize - 0x13)) << 20;
} else {
dramsize = 0;
}
#endif /* CONFIG_SYS_RAMBOOT */
/*
* On MPC5200B we need to set the special configuration delay in the
* DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
* Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
*
* "The SDelay should be written to a value of 0x00000004. It is
* required to account for changes caused by normal wafer processing
* parameters."
*/
svr = get_svr();
pvr = get_pvr();
if ((SVR_MJREV(svr) >= 2) &&
(PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
out_be32((void *)MPC5XXX_SDRAM_SDELAY, 0x04);
__asm__ volatile ("sync");
}
return dramsize;
}
int checkboard (void)
{
puts ("Board: A4M072\n");
return 0;
}
#ifdef CONFIG_PCI
static struct pci_controller hose;
extern void pci_mpc5xxx_init(struct pci_controller *);
void pci_init_board(void)
{
pci_mpc5xxx_init(&hose);
}
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
void
ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
}
#endif
int board_eth_init(bd_t *bis)
{
int rv, num_if = 0;
/* Initialize TSECs first */
if ((rv = cpu_eth_init(bis)) >= 0)
num_if += rv;
else
printf("ERROR: failed to initialize FEC.\n");
if ((rv = pci_eth_init(bis)) >= 0)
num_if += rv;
else
printf("ERROR: failed to initialize PCI Ethernet.\n");
return num_if;
}
/*
* Miscellaneous late-boot configurations
*
* Initialize EEPROM write-protect GPIO pin.
*/
int misc_init_r(void)
{
#if defined(CONFIG_SYS_EEPROM_WREN)
/* Enable GPIO pin */
setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, CONFIG_SYS_EEPROM_WP);
/* Set direction, output */
setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, CONFIG_SYS_EEPROM_WP);
/* De-assert write enable */
setbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, CONFIG_SYS_EEPROM_WP);
#endif
return 0;
}
#if defined(CONFIG_SYS_EEPROM_WREN)
/* Input: <dev_addr> I2C address of EEPROM device to enable.
* <state> -1: deliver current state
* 0: disable write
* 1: enable write
* Returns: -1: wrong device address
* 0: dis-/en- able done
* 0/1: current state if <state> was -1.
*/
int eeprom_write_enable (unsigned dev_addr, int state)
{
if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
return -1;
} else {
switch (state) {
case 1:
/* Enable write access */
clrbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, CONFIG_SYS_EEPROM_WP);
state = 0;
break;
case 0:
/* Disable write access */
setbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, CONFIG_SYS_EEPROM_WP);
state = 0;
break;
default:
/* Read current status back. */
state = (0 == (in_be32((void *)MPC5XXX_WU_GPIO_DATA_O) &
CONFIG_SYS_EEPROM_WP));
break;
}
}
return state;
}
#endif
#ifdef CONFIG_CMD_DISPLAY
#define DISPLAY_BUF_SIZE 2
static u8 display_buf[DISPLAY_BUF_SIZE];
static u8 display_putc_pos;
static u8 display_out_pos;
void display_set(int cmd) {
if (cmd & DISPLAY_CLEAR) {
display_buf[0] = display_buf[1] = 0;
}
if (cmd & DISPLAY_HOME) {
display_putc_pos = 0;
}
}
#define SEG_A (1<<0)
#define SEG_B (1<<1)
#define SEG_C (1<<2)
#define SEG_D (1<<3)
#define SEG_E (1<<4)
#define SEG_F (1<<5)
#define SEG_G (1<<6)
#define SEG_P (1<<7)
#define SEG__ 0
/*
* +- A -+
* | |
* F B
* | |
* +- G -+
* | |
* E C
* | |
* +- D -+ P
*
* 0..9 index 0..9
* A..Z index 10..35
* - index 36
* _ index 37
* . index 38
*/
#define SYMBOL_DASH (36)
#define SYMBOL_UNDERLINE (37)
#define SYMBOL_DOT (38)
static u8 display_char2seg7_tbl[]=
{
SEG_A | SEG_B | SEG_C | SEG_D | SEG_E | SEG_F, /* 0 */
SEG_B | SEG_C, /* 1 */
SEG_A | SEG_B | SEG_D | SEG_E | SEG_G, /* 2 */
SEG_A | SEG_B | SEG_C | SEG_D | SEG_G, /* 3 */
SEG_B | SEG_C | SEG_F | SEG_G, /* 4 */
SEG_A | SEG_C | SEG_D | SEG_F | SEG_G, /* 5 */
SEG_A | SEG_C | SEG_D | SEG_E | SEG_F | SEG_G, /* 6 */
SEG_A | SEG_B | SEG_C, /* 7 */
SEG_A | SEG_B | SEG_C | SEG_D | SEG_E | SEG_F | SEG_G, /* 8 */
SEG_A | SEG_B | SEG_C | SEG_D | SEG_F | SEG_G, /* 9 */
SEG_A | SEG_B | SEG_C | SEG_E | SEG_F | SEG_G, /* A */
SEG_C | SEG_D | SEG_E | SEG_F | SEG_G, /* b */
SEG_A | SEG_D | SEG_E | SEG_F, /* C */
SEG_B | SEG_C | SEG_D | SEG_E | SEG_G, /* d */
SEG_A | SEG_D | SEG_E | SEG_F | SEG_G, /* E */
SEG_A | SEG_E | SEG_F | SEG_G, /* F */
0, /* g - not displayed */
SEG_B | SEG_C | SEG_E | SEG_F | SEG_G, /* H */
SEG_B | SEG_C, /* I */
0, /* J - not displayed */
0, /* K - not displayed */
SEG_D | SEG_E | SEG_F, /* L */
0, /* m - not displayed */
0, /* n - not displayed */
SEG_A | SEG_B | SEG_C | SEG_D | SEG_E | SEG_F, /* O */
SEG_A | SEG_B | SEG_E | SEG_F | SEG_G, /* P */
0, /* q - not displayed */
0, /* r - not displayed */
SEG_A | SEG_C | SEG_D | SEG_F | SEG_G, /* S */
SEG_D | SEG_E | SEG_F | SEG_G, /* t */
SEG_B | SEG_C | SEG_D | SEG_E | SEG_F, /* U */
0, /* V - not displayed */
0, /* w - not displayed */
0, /* X - not displayed */
SEG_B | SEG_C | SEG_D | SEG_F | SEG_G, /* Y */
0, /* Z - not displayed */
SEG_G, /* - */
SEG_D, /* _ */
SEG_P /* . */
};
/* Convert char to the LED segments representation */
static u8 display_char2seg7(char c)
{
u8 val = 0;
if (c >= '0' && c <= '9')
c -= '0';
else if (c >= 'a' && c <= 'z')
c -= 'a' - 10;
else if (c >= 'A' && c <= 'Z')
c -= 'A' - 10;
else if (c == '-')
c = SYMBOL_DASH;
else if (c == '_')
c = SYMBOL_UNDERLINE;
else if (c == '.')
c = SYMBOL_DOT;
else
c = ' '; /* display unsupported symbols as space */
if (c != ' ')
val = display_char2seg7_tbl[(int)c];
return val;
}
int display_putc(char c)
{
if (display_putc_pos >= DISPLAY_BUF_SIZE)
return -1;
display_buf[display_putc_pos++] = display_char2seg7(c);
/* one-symbol message should be steady */
if (display_putc_pos == 1)
display_buf[display_putc_pos] = display_char2seg7(c);
return c;
}
/*
* Flush current symbol to the LED display hardware
*/
static inline void display_flush(void)
{
u32 val = display_buf[display_out_pos];
val |= (val << 8) | (val << 16) | (val << 24);
out_be32((void *)CONFIG_SYS_DISP_CHR_RAM, val);
}
/*
* Output contents of the software display buffer to the LED display every 0.5s
*/
void board_show_activity(ulong timestamp)
{
static ulong last;
static u8 once;
if (!once || (timestamp - last >= (CONFIG_SYS_HZ / 2))) {
display_flush();
display_out_pos ^= 1;
last = timestamp;
once = 1;
}
}
/*
* Empty fake function
*/
void show_activity(int arg)
{
}
#endif
#if defined (CONFIG_SHOW_BOOT_PROGRESS)
static int a4m072_status2code(int status, char *buf)
{
char c = 0;
if (((status > 0) && (status <= 8)) ||
((status >= 100) && (status <= 108)) ||
((status < 0) && (status >= -9)) ||
(status == -100) || (status == -101) ||
((status <= -103) && (status >= -113))) {
c = '5';
} else if (((status >= 9) && (status <= 14)) ||
((status >= 120) && (status <= 123)) ||
((status >= 125) && (status <= 129)) ||
((status >= -13) && (status <= -10)) ||
(status == -120) || (status == -122) ||
((status <= -124) && (status >= -127)) ||
(status == -129)) {
c = '8';
} else if (status == 15) {
c = '9';
} else if ((status <= -30) && (status >= -32)) {
c = 'A';
} else if (((status <= -35) && (status >= -40)) ||
((status <= -42) && (status >= -51)) ||
((status <= -53) && (status >= -58)) ||
(status == -64) ||
((status <= -80) && (status >= -83)) ||
(status == -130) || (status == -140) ||
(status == -150)) {
c = 'B';
}
if (c == 0)
return -EINVAL;
buf[0] = (status < 0) ? '-' : c;
buf[1] = c;
return 0;
}
void show_boot_progress(int status)
{
char buf[2];
if (a4m072_status2code(status, buf) < 0)
return;
display_putc(buf[0]);
display_putc(buf[1]);
display_set(DISPLAY_HOME);
display_out_pos = 0; /* reset output position */
/* we want to flush status 15 now */
if (status == 15)
display_flush();
}
#endif
Reference in a new issue View git blame Copy permalink