mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 23:51:33 +00:00
152ac5fabf
On systems with PIO3 (SAMA5D3/D4/..), the pullup and pulldown configuration is mutualy exclusive. This patch assures that the opposite pull resistor gets disabled before the requested pull resistor is enabled. This changes behavior of at91_set_pio_pulldown() such that the pullup is only disabled if pulldown is to be enabled. This changes behavior of at91_set_pio_pullup() such that the pulldown is only disabled if pullup is to be enabled. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Josh Wu <josh.wu@atmel.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
535 lines
12 KiB
C
535 lines
12 KiB
C
/*
|
|
* Copyright (C) 2013 Bo Shen <voice.shen@atmel.com>
|
|
*
|
|
* Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de)
|
|
*
|
|
* Copyright (C) 2005 HP Labs
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <asm/io.h>
|
|
#include <linux/sizes.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/at91_pio.h>
|
|
|
|
#define GPIO_PER_BANK 32
|
|
|
|
static struct at91_port *at91_pio_get_port(unsigned port)
|
|
{
|
|
switch (port) {
|
|
case AT91_PIO_PORTA:
|
|
return (struct at91_port *)ATMEL_BASE_PIOA;
|
|
case AT91_PIO_PORTB:
|
|
return (struct at91_port *)ATMEL_BASE_PIOB;
|
|
case AT91_PIO_PORTC:
|
|
return (struct at91_port *)ATMEL_BASE_PIOC;
|
|
#if (ATMEL_PIO_PORTS > 3)
|
|
case AT91_PIO_PORTD:
|
|
return (struct at91_port *)ATMEL_BASE_PIOD;
|
|
#if (ATMEL_PIO_PORTS > 4)
|
|
case AT91_PIO_PORTE:
|
|
return (struct at91_port *)ATMEL_BASE_PIOE;
|
|
#endif
|
|
#endif
|
|
default:
|
|
printf("Error: at91_gpio: Fail to get PIO base!\n");
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
static void at91_set_port_pullup(struct at91_port *at91_port, unsigned offset,
|
|
int use_pullup)
|
|
{
|
|
u32 mask;
|
|
|
|
mask = 1 << offset;
|
|
if (use_pullup)
|
|
writel(mask, &at91_port->puer);
|
|
else
|
|
writel(mask, &at91_port->pudr);
|
|
writel(mask, &at91_port->per);
|
|
}
|
|
|
|
int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup)
|
|
{
|
|
struct at91_port *at91_port = at91_pio_get_port(port);
|
|
|
|
#if defined(CPU_HAS_PIO3)
|
|
if (use_pullup)
|
|
at91_set_pio_pulldown(port, pin, 0);
|
|
#endif
|
|
|
|
if (at91_port && (pin < GPIO_PER_BANK))
|
|
at91_set_port_pullup(at91_port, pin, use_pullup);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* mux the pin to the "GPIO" peripheral role.
|
|
*/
|
|
int at91_set_pio_periph(unsigned port, unsigned pin, int use_pullup)
|
|
{
|
|
struct at91_port *at91_port = at91_pio_get_port(port);
|
|
u32 mask;
|
|
|
|
if (at91_port && (pin < GPIO_PER_BANK)) {
|
|
mask = 1 << pin;
|
|
writel(mask, &at91_port->idr);
|
|
at91_set_pio_pullup(port, pin, use_pullup);
|
|
writel(mask, &at91_port->per);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* mux the pin to the "A" internal peripheral role.
|
|
*/
|
|
int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup)
|
|
{
|
|
struct at91_port *at91_port = at91_pio_get_port(port);
|
|
u32 mask;
|
|
|
|
if (at91_port && (pin < GPIO_PER_BANK)) {
|
|
mask = 1 << pin;
|
|
writel(mask, &at91_port->idr);
|
|
at91_set_pio_pullup(port, pin, use_pullup);
|
|
#if defined(CPU_HAS_PIO3)
|
|
writel(readl(&at91_port->abcdsr1) & ~mask,
|
|
&at91_port->abcdsr1);
|
|
writel(readl(&at91_port->abcdsr2) & ~mask,
|
|
&at91_port->abcdsr2);
|
|
#else
|
|
writel(mask, &at91_port->asr);
|
|
#endif
|
|
writel(mask, &at91_port->pdr);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* mux the pin to the "B" internal peripheral role.
|
|
*/
|
|
int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup)
|
|
{
|
|
struct at91_port *at91_port = at91_pio_get_port(port);
|
|
u32 mask;
|
|
|
|
if (at91_port && (pin < GPIO_PER_BANK)) {
|
|
mask = 1 << pin;
|
|
writel(mask, &at91_port->idr);
|
|
at91_set_pio_pullup(port, pin, use_pullup);
|
|
#if defined(CPU_HAS_PIO3)
|
|
writel(readl(&at91_port->abcdsr1) | mask,
|
|
&at91_port->abcdsr1);
|
|
writel(readl(&at91_port->abcdsr2) & ~mask,
|
|
&at91_port->abcdsr2);
|
|
#else
|
|
writel(mask, &at91_port->bsr);
|
|
#endif
|
|
writel(mask, &at91_port->pdr);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CPU_HAS_PIO3)
|
|
/*
|
|
* mux the pin to the "C" internal peripheral role.
|
|
*/
|
|
int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup)
|
|
{
|
|
struct at91_port *at91_port = at91_pio_get_port(port);
|
|
u32 mask;
|
|
|
|
if (at91_port && (pin < GPIO_PER_BANK)) {
|
|
mask = 1 << pin;
|
|
writel(mask, &at91_port->idr);
|
|
at91_set_pio_pullup(port, pin, use_pullup);
|
|
writel(readl(&at91_port->abcdsr1) & ~mask,
|
|
&at91_port->abcdsr1);
|
|
writel(readl(&at91_port->abcdsr2) | mask,
|
|
&at91_port->abcdsr2);
|
|
writel(mask, &at91_port->pdr);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* mux the pin to the "D" internal peripheral role.
|
|
*/
|
|
int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup)
|
|
{
|
|
struct at91_port *at91_port = at91_pio_get_port(port);
|
|
u32 mask;
|
|
|
|
if (at91_port && (pin < GPIO_PER_BANK)) {
|
|
mask = 1 << pin;
|
|
writel(mask, &at91_port->idr);
|
|
at91_set_pio_pullup(port, pin, use_pullup);
|
|
writel(readl(&at91_port->abcdsr1) | mask,
|
|
&at91_port->abcdsr1);
|
|
writel(readl(&at91_port->abcdsr2) | mask,
|
|
&at91_port->abcdsr2);
|
|
writel(mask, &at91_port->pdr);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_DM_GPIO
|
|
static bool at91_get_port_output(struct at91_port *at91_port, int offset)
|
|
{
|
|
u32 mask, val;
|
|
|
|
mask = 1 << offset;
|
|
val = readl(&at91_port->osr);
|
|
return val & mask;
|
|
}
|
|
#endif
|
|
|
|
static void at91_set_port_input(struct at91_port *at91_port, int offset,
|
|
int use_pullup)
|
|
{
|
|
u32 mask;
|
|
|
|
mask = 1 << offset;
|
|
writel(mask, &at91_port->idr);
|
|
at91_set_port_pullup(at91_port, offset, use_pullup);
|
|
writel(mask, &at91_port->odr);
|
|
writel(mask, &at91_port->per);
|
|
}
|
|
|
|
/*
|
|
* mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
|
|
* configure it for an input.
|
|
*/
|
|
int at91_set_pio_input(unsigned port, u32 pin, int use_pullup)
|
|
{
|
|
struct at91_port *at91_port = at91_pio_get_port(port);
|
|
|
|
if (at91_port && (pin < GPIO_PER_BANK))
|
|
at91_set_port_input(at91_port, pin, use_pullup);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void at91_set_port_output(struct at91_port *at91_port, int offset,
|
|
int value)
|
|
{
|
|
u32 mask;
|
|
|
|
mask = 1 << offset;
|
|
writel(mask, &at91_port->idr);
|
|
writel(mask, &at91_port->pudr);
|
|
if (value)
|
|
writel(mask, &at91_port->sodr);
|
|
else
|
|
writel(mask, &at91_port->codr);
|
|
writel(mask, &at91_port->oer);
|
|
writel(mask, &at91_port->per);
|
|
}
|
|
|
|
/*
|
|
* mux the pin to the gpio controller (instead of "A" or "B" peripheral),
|
|
* and configure it for an output.
|
|
*/
|
|
int at91_set_pio_output(unsigned port, u32 pin, int value)
|
|
{
|
|
struct at91_port *at91_port = at91_pio_get_port(port);
|
|
|
|
if (at91_port && (pin < GPIO_PER_BANK))
|
|
at91_set_port_output(at91_port, pin, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* enable/disable the glitch filter. mostly used with IRQ handling.
|
|
*/
|
|
int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on)
|
|
{
|
|
struct at91_port *at91_port = at91_pio_get_port(port);
|
|
u32 mask;
|
|
|
|
if (at91_port && (pin < GPIO_PER_BANK)) {
|
|
mask = 1 << pin;
|
|
if (is_on) {
|
|
#if defined(CPU_HAS_PIO3)
|
|
writel(mask, &at91_port->ifscdr);
|
|
#endif
|
|
writel(mask, &at91_port->ifer);
|
|
} else {
|
|
writel(mask, &at91_port->ifdr);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CPU_HAS_PIO3)
|
|
/*
|
|
* enable/disable the debounce filter.
|
|
*/
|
|
int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div)
|
|
{
|
|
struct at91_port *at91_port = at91_pio_get_port(port);
|
|
u32 mask;
|
|
|
|
if (at91_port && (pin < GPIO_PER_BANK)) {
|
|
mask = 1 << pin;
|
|
if (is_on) {
|
|
writel(mask, &at91_port->ifscer);
|
|
writel(div & PIO_SCDR_DIV, &at91_port->scdr);
|
|
writel(mask, &at91_port->ifer);
|
|
} else {
|
|
writel(mask, &at91_port->ifdr);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* enable/disable the pull-down.
|
|
* If pull-up already enabled while calling the function, we disable it.
|
|
*/
|
|
int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on)
|
|
{
|
|
struct at91_port *at91_port = at91_pio_get_port(port);
|
|
u32 mask;
|
|
|
|
if (at91_port && (pin < GPIO_PER_BANK)) {
|
|
mask = 1 << pin;
|
|
if (is_on) {
|
|
at91_set_pio_pullup(port, pin, 0);
|
|
writel(mask, &at91_port->ppder);
|
|
} else
|
|
writel(mask, &at91_port->ppddr);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* disable Schmitt trigger
|
|
*/
|
|
int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin)
|
|
{
|
|
struct at91_port *at91_port = at91_pio_get_port(port);
|
|
u32 mask;
|
|
|
|
if (at91_port && (pin < GPIO_PER_BANK)) {
|
|
mask = 1 << pin;
|
|
writel(readl(&at91_port->schmitt) | mask,
|
|
&at91_port->schmitt);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* enable/disable the multi-driver. This is only valid for output and
|
|
* allows the output pin to run as an open collector output.
|
|
*/
|
|
int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on)
|
|
{
|
|
struct at91_port *at91_port = at91_pio_get_port(port);
|
|
u32 mask;
|
|
|
|
if (at91_port && (pin < GPIO_PER_BANK)) {
|
|
mask = 1 << pin;
|
|
if (is_on)
|
|
writel(mask, &at91_port->mder);
|
|
else
|
|
writel(mask, &at91_port->mddr);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void at91_set_port_value(struct at91_port *at91_port, int offset,
|
|
int value)
|
|
{
|
|
u32 mask;
|
|
|
|
mask = 1 << offset;
|
|
if (value)
|
|
writel(mask, &at91_port->sodr);
|
|
else
|
|
writel(mask, &at91_port->codr);
|
|
}
|
|
|
|
/*
|
|
* assuming the pin is muxed as a gpio output, set its value.
|
|
*/
|
|
int at91_set_pio_value(unsigned port, unsigned pin, int value)
|
|
{
|
|
struct at91_port *at91_port = at91_pio_get_port(port);
|
|
|
|
if (at91_port && (pin < GPIO_PER_BANK))
|
|
at91_set_port_value(at91_port, pin, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_get_port_value(struct at91_port *at91_port, int offset)
|
|
{
|
|
u32 pdsr = 0, mask;
|
|
|
|
mask = 1 << offset;
|
|
pdsr = readl(&at91_port->pdsr) & mask;
|
|
|
|
return pdsr != 0;
|
|
}
|
|
/*
|
|
* read the pin's value (works even if it's not muxed as a gpio).
|
|
*/
|
|
int at91_get_pio_value(unsigned port, unsigned pin)
|
|
{
|
|
struct at91_port *at91_port = at91_pio_get_port(port);
|
|
|
|
if (at91_port && (pin < GPIO_PER_BANK))
|
|
return at91_get_port_value(at91_port, pin);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_GPIO
|
|
/* Common GPIO API */
|
|
|
|
int gpio_request(unsigned gpio, const char *label)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int gpio_free(unsigned gpio)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int gpio_direction_input(unsigned gpio)
|
|
{
|
|
at91_set_pio_input(at91_gpio_to_port(gpio),
|
|
at91_gpio_to_pin(gpio), 0);
|
|
return 0;
|
|
}
|
|
|
|
int gpio_direction_output(unsigned gpio, int value)
|
|
{
|
|
at91_set_pio_output(at91_gpio_to_port(gpio),
|
|
at91_gpio_to_pin(gpio), value);
|
|
return 0;
|
|
}
|
|
|
|
int gpio_get_value(unsigned gpio)
|
|
{
|
|
return at91_get_pio_value(at91_gpio_to_port(gpio),
|
|
at91_gpio_to_pin(gpio));
|
|
}
|
|
|
|
int gpio_set_value(unsigned gpio, int value)
|
|
{
|
|
at91_set_pio_value(at91_gpio_to_port(gpio),
|
|
at91_gpio_to_pin(gpio), value);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_DM_GPIO
|
|
|
|
struct at91_port_priv {
|
|
struct at91_port *regs;
|
|
};
|
|
|
|
/* set GPIO pin 'gpio' as an input */
|
|
static int at91_gpio_direction_input(struct udevice *dev, unsigned offset)
|
|
{
|
|
struct at91_port_priv *port = dev_get_priv(dev);
|
|
|
|
at91_set_port_input(port->regs, offset, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* set GPIO pin 'gpio' as an output, with polarity 'value' */
|
|
static int at91_gpio_direction_output(struct udevice *dev, unsigned offset,
|
|
int value)
|
|
{
|
|
struct at91_port_priv *port = dev_get_priv(dev);
|
|
|
|
at91_set_port_output(port->regs, offset, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* read GPIO IN value of pin 'gpio' */
|
|
static int at91_gpio_get_value(struct udevice *dev, unsigned offset)
|
|
{
|
|
struct at91_port_priv *port = dev_get_priv(dev);
|
|
|
|
return at91_get_port_value(port->regs, offset);
|
|
}
|
|
|
|
/* write GPIO OUT value to pin 'gpio' */
|
|
static int at91_gpio_set_value(struct udevice *dev, unsigned offset,
|
|
int value)
|
|
{
|
|
struct at91_port_priv *port = dev_get_priv(dev);
|
|
|
|
at91_set_port_value(port->regs, offset, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_gpio_get_function(struct udevice *dev, unsigned offset)
|
|
{
|
|
struct at91_port_priv *port = dev_get_priv(dev);
|
|
|
|
/* GPIOF_FUNC is not implemented yet */
|
|
if (at91_get_port_output(port->regs, offset))
|
|
return GPIOF_OUTPUT;
|
|
else
|
|
return GPIOF_INPUT;
|
|
}
|
|
|
|
static const struct dm_gpio_ops gpio_at91_ops = {
|
|
.direction_input = at91_gpio_direction_input,
|
|
.direction_output = at91_gpio_direction_output,
|
|
.get_value = at91_gpio_get_value,
|
|
.set_value = at91_gpio_set_value,
|
|
.get_function = at91_gpio_get_function,
|
|
};
|
|
|
|
static int at91_gpio_probe(struct udevice *dev)
|
|
{
|
|
struct at91_port_priv *port = dev_get_priv(dev);
|
|
struct at91_port_platdata *plat = dev_get_platdata(dev);
|
|
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
|
|
|
|
uc_priv->bank_name = plat->bank_name;
|
|
uc_priv->gpio_count = GPIO_PER_BANK;
|
|
port->regs = (struct at91_port *)plat->base_addr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_DRIVER(gpio_at91) = {
|
|
.name = "gpio_at91",
|
|
.id = UCLASS_GPIO,
|
|
.ops = &gpio_at91_ops,
|
|
.probe = at91_gpio_probe,
|
|
.priv_auto_alloc_size = sizeof(struct at91_port_priv),
|
|
};
|
|
#endif
|