mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 23:02:59 +00:00
73d7aec0b1
Drop the example, for two reasons. First, it is tapping directly into the IO accessors of the SMC911x, while it should instead go through the net device API. Second, this makes conversion of the SMC911x driver to DM real hard. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> |
||
---|---|---|
.. | ||
.gitignore | ||
atmel_df_pow2.c | ||
hello_world.c | ||
Makefile | ||
nds32.lds | ||
ppc_longjmp.S | ||
ppc_setjmp.S | ||
README.smc91111_eeprom | ||
sched.c | ||
smc91111_eeprom.c | ||
sparc.lds | ||
stubs.c |
This is the readme for the Das U-Boot standalone program smc91111 The main purpose of this is to manage MAC addresses on platforms which include the SMC91111 integrated 10/100 MAC Phy, with attached EEPROMs. Contents: ------------------------ 1. Ensuring U-Boot's MAC address can be set in hardware 2. Running the smc91111_eeprom program 3. Setting MAC addresses 4. Other things you can do with this 5. Things to be done. 1. Ensuring U-Boot's MAC address can be set in hardware -------------------------------------------------------------------------- On the Internet - MAC addresses are very important. Short for Media Access Control address, a hardware address that uniquely identifies each node of a network. When things are not unique - bad things can happen. This is why U-Boot makes it difficult to change MAC addresses. To find out who has a MAC address, or to purchase MAC addresses, goto the IEEE, at: http://standards.ieee.org/regauth/oui/index.shtml 2. Running the smc91111_eeprom program --------------------------------------------------------------------- After Uboot is compiled, there should be three files of interest: -rwxr-xr-x 1 8806 2004-10-11 14:00 smc91111_eeprom <- ELF -rwxr-xr-x 1 3440 2004-10-11 14:00 smc91111_eeprom.bin <- BIN -rwxr-xr-x 1 9524 2004-10-11 14:00 smc91111_eeprom.srec <- SREC if there is not, check the examples/Makefile, and ensure there is something like for your architecture: ifeq ($(ARCH),blackfin) SREC += smc91111_eeprom.srec BIN += smc91111_eeprom.bin smc91111_eeprom endif To load the files: there are two methods: a) serial or b) network. Since it is not a good idea to start doing things on the network before the MAC address is set, this example will do things over serial. a) Loading the elf file via the serial port -------------------------------------------- Loading the elf is very easy - just ensure that the location you specify things to load as is not the load address specified in the Makefile. BOOT> loadb 0x1000000 ## Ready for binary (kermit) download to 0x01000000 at 57600 bps... (type CNTL-\ then C) (Back at local machine) ---------------------------------------------------- Kermit>send ~/u-boot_1.1.1/examples/smc91111_eeprom Kermit>connect Connecting to /dev/ttyS0, speed 57600 Escape character: Ctrl-\ (ASCII 28, FS): enabled Type the escape character followed by C to get back, or followed by ? to see other options. ---------------------------------------------------- ## Total Size = 0x00002266 = 8806 Bytes ## Start Addr = 0x01000000 BOOT> bootelf 0x1000000 Loading .text @ 0x00001000 (3440 bytes) ## Starting application at 0x000010d8 ... SMC91111> b) Loading the binary file via the serial port ----------------------------------------------- For many toolchains, the entry point is not the load point. The Load point is a hard coded address from the examples/Makefile. The entry point can be found by doing something like: u-boot_1.1.1/examples> bfin-elf-objdump -d smc91111_eeprom |less smc91111_eeprom: file format elf32-bfin Disassembly of section .text: 00001000 <smc91111_eeprom-0xd8>: 1000: 000010d8 <smc91111_eeprom>: You can see that the entry point (or the address that should be jumped to is 0x10d8). This is also the same as the entry point of the elf file. Now we load it to the actual load location: BOOT> loadb 0x1000 ## Ready for binary (kermit) download to 0x00001000 at 57600 bps... (Back at pinky.dsl-only.net) ---------------------------------------------------- Kermit>send /tftpboot/eeprom.bin Kermit>connect Connecting to /dev/ttyS0, speed 57600 Escape character: Ctrl-\ (ASCII 28, FS): enabled Type the escape character followed by C to get back, or followed by ? to see other options. ---------------------------------------------------- ## Total Size = 0x00000d70 = 3440 Bytes ## Start Addr = 0x00001000 BOOT> go 0x10D8 ## Starting application at 0x000010D8 ... SMC91111> 3. Setting MAC addresses -------------------------------------------------------------------------- The MAC address can be stored in four locations: -Boot environmental variable in Flash <- can not change, without re-flashing U-Boot. U-Boot environmental variable <- can not change, without resetting board/U-Boot LAN91C111 Registers <- volatile LAN91C111 EEPROM <- Non-volatile If you have not activated the network, and do not have a hardcoded or pre-assigned MAC address in U-Boot, the environmental variables should be blank, and allow you to set things one time. To set the EEPROM MAC address to 12:34:56:78:9A:BC SMC91111> W E 20 3412 Writing EEPROM register 20 with 3412 SMC91111> W E 21 7856 Writing EEPROM register 21 with 7856 SMC91111> W E 22 BC9A Writing EEPROM register 22 with bc9a EEPROM contents copied to MAC SMC91111> P Current MAC Address in SMSC91111 12:34:56:78:9a:bc Current MAC Address in EEPROM 12:34:56:78:9a:bc (CNTRL-C to exit) SMC91111> ## Application terminated, rc = 0x0 BOOT> reset U-Boot 1.1.1 (gcc version: 3.3.3) Release Version Beta released on Oct 10 2004 - 00:34:35 Blackfin support by LG Soft India For further information please check this link http://www.blackfin.uclinux.org BOOT> ping 192.168.0.4 Using MAC Address 12:34:56:78:9A:BC host 192.168.0.4 is alive 4. Other things that you can do -------------------------------------------------------------------------- After the stand alone application is running, there are a few options: - P : Print the MAC - D : Dump the LAN91C111 EEPROM contents - M : Dump the LAN91C111 MAC contents - C : Copies the MAC address from the EEPROM to the LAN91C111 - W : Write a register in the EEPROM or in the MAC SMC91111> P Current MAC Address in SMSC91111 12:34:56:78:9a:bc Current MAC Address in EEPROM 12:34:56:78:9a:bc SMC91111> D IOS2-0 000 001 002 003 004 005 006 007 CONFIG 00:ffff 04:ffff 08:ffff 0c:ffff 10:ffff 14:ffff 18:ffff 1c:ffff BASE 01:ffff 05:ffff 09:ffff 0d:ffff 11:ffff 15:ffff 19:ffff 1d:ffff 02:ffff 06:ffff 0a:ffff 0e:0020 12:ffff 16:ffff 1a:ffff 1e:ffff 03:ffff 07:ffff 0b:ffff 0f:ffff 13:ffff 17:ffff 1b:ffff 1f:ffff 20:3412 21:7856 22:bc9a 23:ffff 24:ffff 25:ffff 26:ffff 27:ffff 28:ffff 29:ffff 2a:ffff 2b:ffff 2c:ffff 2d:ffff 2e:ffff 2f:ffff 30:ffff 31:ffff 32:ffff 33:ffff 34:ffff 35:ffff 36:ffff 37:ffff 38:ffff 39:ffff 3a:ffff 3b:ffff 3c:ffff 3d:ffff 3e:ffff 3f:ffff SMC91111> M Bank0 Bank1 Bank2 Bank3 00 0000 a0b1 3332 0000 02 0000 1801 8000 0000 04 0000 3412 8080 0000 06 0000 7856 003f 0000 08 0404 bc9a 02df 3332 0a 0000 ffff 02df 3391 0c 0000 1214 0004 001f 0e 3300 3301 3302 3303 SMC91111> C EEPROM contents copied to MAC SMC91111> W E 2A ABCD Writing EEPROM register 2a with abcd SMC91111> W M 14 FF00 Writing MAC register bank 1, reg 04 with ff00