mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 22:20:45 +00:00
902af10d67
In R-Car Gen 3, there is a DMA controller restriction of SDHI. When the transfer exceeding the 4 kByte boundary is performed while the DRAM address is not 128 byte aligned, the bus is occupied. This patch avoids this. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
778 lines
19 KiB
C
778 lines
19 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2016 Socionext Inc.
|
|
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <cpu_func.h>
|
|
#include <fdtdec.h>
|
|
#include <mmc.h>
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
#include <dm/pinctrl.h>
|
|
#include <linux/compat.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/io.h>
|
|
#include <linux/sizes.h>
|
|
#include <power/regulator.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#include "tmio-common.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static u64 tmio_sd_readq(struct tmio_sd_priv *priv, unsigned int reg)
|
|
{
|
|
return readq(priv->regbase + (reg << 1));
|
|
}
|
|
|
|
static void tmio_sd_writeq(struct tmio_sd_priv *priv,
|
|
u64 val, unsigned int reg)
|
|
{
|
|
writeq(val, priv->regbase + (reg << 1));
|
|
}
|
|
|
|
static u16 tmio_sd_readw(struct tmio_sd_priv *priv, unsigned int reg)
|
|
{
|
|
return readw(priv->regbase + (reg >> 1));
|
|
}
|
|
|
|
static void tmio_sd_writew(struct tmio_sd_priv *priv,
|
|
u16 val, unsigned int reg)
|
|
{
|
|
writew(val, priv->regbase + (reg >> 1));
|
|
}
|
|
|
|
u32 tmio_sd_readl(struct tmio_sd_priv *priv, unsigned int reg)
|
|
{
|
|
u32 val;
|
|
|
|
if (priv->caps & TMIO_SD_CAP_64BIT)
|
|
return readl(priv->regbase + (reg << 1));
|
|
else if (priv->caps & TMIO_SD_CAP_16BIT) {
|
|
val = readw(priv->regbase + (reg >> 1)) & 0xffff;
|
|
if ((reg == TMIO_SD_RSP10) || (reg == TMIO_SD_RSP32) ||
|
|
(reg == TMIO_SD_RSP54) || (reg == TMIO_SD_RSP76)) {
|
|
val |= readw(priv->regbase + (reg >> 1) + 2) << 16;
|
|
}
|
|
return val;
|
|
} else
|
|
return readl(priv->regbase + reg);
|
|
}
|
|
|
|
void tmio_sd_writel(struct tmio_sd_priv *priv,
|
|
u32 val, unsigned int reg)
|
|
{
|
|
if (priv->caps & TMIO_SD_CAP_64BIT)
|
|
writel(val, priv->regbase + (reg << 1));
|
|
else if (priv->caps & TMIO_SD_CAP_16BIT) {
|
|
writew(val & 0xffff, priv->regbase + (reg >> 1));
|
|
if (reg == TMIO_SD_INFO1 || reg == TMIO_SD_INFO1_MASK ||
|
|
reg == TMIO_SD_INFO2 || reg == TMIO_SD_INFO2_MASK ||
|
|
reg == TMIO_SD_ARG)
|
|
writew(val >> 16, priv->regbase + (reg >> 1) + 2);
|
|
} else
|
|
writel(val, priv->regbase + reg);
|
|
}
|
|
|
|
static int tmio_sd_check_error(struct udevice *dev, struct mmc_cmd *cmd)
|
|
{
|
|
struct tmio_sd_priv *priv = dev_get_priv(dev);
|
|
u32 info2 = tmio_sd_readl(priv, TMIO_SD_INFO2);
|
|
|
|
if (info2 & TMIO_SD_INFO2_ERR_RTO) {
|
|
/*
|
|
* TIMEOUT must be returned for unsupported command. Do not
|
|
* display error log since this might be a part of sequence to
|
|
* distinguish between SD and MMC.
|
|
*/
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
if (info2 & TMIO_SD_INFO2_ERR_TO) {
|
|
dev_err(dev, "timeout error\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
if (info2 & (TMIO_SD_INFO2_ERR_END | TMIO_SD_INFO2_ERR_CRC |
|
|
TMIO_SD_INFO2_ERR_IDX)) {
|
|
if ((cmd->cmdidx != MMC_CMD_SEND_TUNING_BLOCK) &&
|
|
(cmd->cmdidx != MMC_CMD_SEND_TUNING_BLOCK_HS200))
|
|
dev_err(dev, "communication out of sync\n");
|
|
return -EILSEQ;
|
|
}
|
|
|
|
if (info2 & (TMIO_SD_INFO2_ERR_ILA | TMIO_SD_INFO2_ERR_ILR |
|
|
TMIO_SD_INFO2_ERR_ILW)) {
|
|
dev_err(dev, "illegal access\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tmio_sd_wait_for_irq(struct udevice *dev, struct mmc_cmd *cmd,
|
|
unsigned int reg, u32 flag)
|
|
{
|
|
struct tmio_sd_priv *priv = dev_get_priv(dev);
|
|
long wait = 1000000;
|
|
int ret;
|
|
|
|
while (!(tmio_sd_readl(priv, reg) & flag)) {
|
|
if (wait-- < 0) {
|
|
dev_err(dev, "timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
ret = tmio_sd_check_error(dev, cmd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
udelay(1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define tmio_pio_read_fifo(__width, __suffix) \
|
|
static void tmio_pio_read_fifo_##__width(struct tmio_sd_priv *priv, \
|
|
char *pbuf, uint blksz) \
|
|
{ \
|
|
u##__width *buf = (u##__width *)pbuf; \
|
|
int i; \
|
|
\
|
|
if (likely(IS_ALIGNED((uintptr_t)buf, ((__width) / 8)))) { \
|
|
for (i = 0; i < blksz / ((__width) / 8); i++) { \
|
|
*buf++ = tmio_sd_read##__suffix(priv, \
|
|
TMIO_SD_BUF); \
|
|
} \
|
|
} else { \
|
|
for (i = 0; i < blksz / ((__width) / 8); i++) { \
|
|
u##__width data; \
|
|
data = tmio_sd_read##__suffix(priv, \
|
|
TMIO_SD_BUF); \
|
|
put_unaligned(data, buf++); \
|
|
} \
|
|
} \
|
|
}
|
|
|
|
tmio_pio_read_fifo(64, q)
|
|
tmio_pio_read_fifo(32, l)
|
|
tmio_pio_read_fifo(16, w)
|
|
|
|
static int tmio_sd_pio_read_one_block(struct udevice *dev, struct mmc_cmd *cmd,
|
|
char *pbuf, uint blocksize)
|
|
{
|
|
struct tmio_sd_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
/* wait until the buffer is filled with data */
|
|
ret = tmio_sd_wait_for_irq(dev, cmd, TMIO_SD_INFO2,
|
|
TMIO_SD_INFO2_BRE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Clear the status flag _before_ read the buffer out because
|
|
* TMIO_SD_INFO2_BRE is edge-triggered, not level-triggered.
|
|
*/
|
|
tmio_sd_writel(priv, 0, TMIO_SD_INFO2);
|
|
|
|
if (priv->caps & TMIO_SD_CAP_64BIT)
|
|
tmio_pio_read_fifo_64(priv, pbuf, blocksize);
|
|
else if (priv->caps & TMIO_SD_CAP_16BIT)
|
|
tmio_pio_read_fifo_16(priv, pbuf, blocksize);
|
|
else
|
|
tmio_pio_read_fifo_32(priv, pbuf, blocksize);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define tmio_pio_write_fifo(__width, __suffix) \
|
|
static void tmio_pio_write_fifo_##__width(struct tmio_sd_priv *priv, \
|
|
const char *pbuf, uint blksz)\
|
|
{ \
|
|
const u##__width *buf = (const u##__width *)pbuf; \
|
|
int i; \
|
|
\
|
|
if (likely(IS_ALIGNED((uintptr_t)buf, ((__width) / 8)))) { \
|
|
for (i = 0; i < blksz / ((__width) / 8); i++) { \
|
|
tmio_sd_write##__suffix(priv, *buf++, \
|
|
TMIO_SD_BUF); \
|
|
} \
|
|
} else { \
|
|
for (i = 0; i < blksz / ((__width) / 8); i++) { \
|
|
u##__width data = get_unaligned(buf++); \
|
|
tmio_sd_write##__suffix(priv, data, \
|
|
TMIO_SD_BUF); \
|
|
} \
|
|
} \
|
|
}
|
|
|
|
tmio_pio_write_fifo(64, q)
|
|
tmio_pio_write_fifo(32, l)
|
|
tmio_pio_write_fifo(16, w)
|
|
|
|
static int tmio_sd_pio_write_one_block(struct udevice *dev, struct mmc_cmd *cmd,
|
|
const char *pbuf, uint blocksize)
|
|
{
|
|
struct tmio_sd_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
/* wait until the buffer becomes empty */
|
|
ret = tmio_sd_wait_for_irq(dev, cmd, TMIO_SD_INFO2,
|
|
TMIO_SD_INFO2_BWE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
tmio_sd_writel(priv, 0, TMIO_SD_INFO2);
|
|
|
|
if (priv->caps & TMIO_SD_CAP_64BIT)
|
|
tmio_pio_write_fifo_64(priv, pbuf, blocksize);
|
|
else if (priv->caps & TMIO_SD_CAP_16BIT)
|
|
tmio_pio_write_fifo_16(priv, pbuf, blocksize);
|
|
else
|
|
tmio_pio_write_fifo_32(priv, pbuf, blocksize);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tmio_sd_pio_xfer(struct udevice *dev, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
const char *src = data->src;
|
|
char *dest = data->dest;
|
|
int i, ret;
|
|
|
|
for (i = 0; i < data->blocks; i++) {
|
|
if (data->flags & MMC_DATA_READ)
|
|
ret = tmio_sd_pio_read_one_block(dev, cmd, dest,
|
|
data->blocksize);
|
|
else
|
|
ret = tmio_sd_pio_write_one_block(dev, cmd, src,
|
|
data->blocksize);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (data->flags & MMC_DATA_READ)
|
|
dest += data->blocksize;
|
|
else
|
|
src += data->blocksize;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tmio_sd_dma_start(struct tmio_sd_priv *priv,
|
|
dma_addr_t dma_addr)
|
|
{
|
|
u32 tmp;
|
|
|
|
tmio_sd_writel(priv, 0, TMIO_SD_DMA_INFO1);
|
|
tmio_sd_writel(priv, 0, TMIO_SD_DMA_INFO2);
|
|
|
|
/* enable DMA */
|
|
tmp = tmio_sd_readl(priv, TMIO_SD_EXTMODE);
|
|
tmp |= TMIO_SD_EXTMODE_DMA_EN;
|
|
tmio_sd_writel(priv, tmp, TMIO_SD_EXTMODE);
|
|
|
|
tmio_sd_writel(priv, dma_addr & U32_MAX, TMIO_SD_DMA_ADDR_L);
|
|
|
|
/* suppress the warning "right shift count >= width of type" */
|
|
dma_addr >>= min_t(int, 32, 8 * sizeof(dma_addr));
|
|
|
|
tmio_sd_writel(priv, dma_addr & U32_MAX, TMIO_SD_DMA_ADDR_H);
|
|
|
|
tmio_sd_writel(priv, TMIO_SD_DMA_CTL_START, TMIO_SD_DMA_CTL);
|
|
}
|
|
|
|
static int tmio_sd_dma_wait_for_irq(struct udevice *dev, u32 flag,
|
|
unsigned int blocks)
|
|
{
|
|
struct tmio_sd_priv *priv = dev_get_priv(dev);
|
|
long wait = 1000000 + 10 * blocks;
|
|
|
|
while (!(tmio_sd_readl(priv, TMIO_SD_DMA_INFO1) & flag)) {
|
|
if (wait-- < 0) {
|
|
dev_err(dev, "timeout during DMA\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
udelay(10);
|
|
}
|
|
|
|
if (tmio_sd_readl(priv, TMIO_SD_DMA_INFO2)) {
|
|
dev_err(dev, "error during DMA\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tmio_sd_dma_xfer(struct udevice *dev, struct mmc_data *data)
|
|
{
|
|
struct tmio_sd_priv *priv = dev_get_priv(dev);
|
|
size_t len = data->blocks * data->blocksize;
|
|
void *buf;
|
|
enum dma_data_direction dir;
|
|
dma_addr_t dma_addr;
|
|
u32 poll_flag, tmp;
|
|
int ret;
|
|
|
|
tmp = tmio_sd_readl(priv, TMIO_SD_DMA_MODE);
|
|
|
|
if (data->flags & MMC_DATA_READ) {
|
|
buf = data->dest;
|
|
dir = DMA_FROM_DEVICE;
|
|
/*
|
|
* The DMA READ completion flag position differs on Socionext
|
|
* and Renesas SoCs. It is bit 20 on Socionext SoCs and using
|
|
* bit 17 is a hardware bug and forbidden. It is either bit 17
|
|
* or bit 20 on Renesas SoCs, depending on SoC.
|
|
*/
|
|
poll_flag = priv->read_poll_flag;
|
|
tmp |= TMIO_SD_DMA_MODE_DIR_RD;
|
|
} else {
|
|
buf = (void *)data->src;
|
|
dir = DMA_TO_DEVICE;
|
|
poll_flag = TMIO_SD_DMA_INFO1_END_WR;
|
|
tmp &= ~TMIO_SD_DMA_MODE_DIR_RD;
|
|
}
|
|
|
|
tmio_sd_writel(priv, tmp, TMIO_SD_DMA_MODE);
|
|
|
|
dma_addr = dma_map_single(buf, len, dir);
|
|
|
|
tmio_sd_dma_start(priv, dma_addr);
|
|
|
|
ret = tmio_sd_dma_wait_for_irq(dev, poll_flag, data->blocks);
|
|
|
|
if (poll_flag == TMIO_SD_DMA_INFO1_END_RD)
|
|
udelay(1);
|
|
|
|
dma_unmap_single(dma_addr, len, dir);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* check if the address is DMA'able */
|
|
static bool tmio_sd_addr_is_dmaable(struct mmc_data *data)
|
|
{
|
|
uintptr_t addr = (uintptr_t)data->src;
|
|
|
|
if (!IS_ALIGNED(addr, TMIO_SD_DMA_MINALIGN))
|
|
return false;
|
|
|
|
#if defined(CONFIG_RCAR_GEN3)
|
|
if (!(data->flags & MMC_DATA_READ) && !IS_ALIGNED(addr, 128))
|
|
return false;
|
|
/* Gen3 DMA has 32bit limit */
|
|
if (addr >> 32)
|
|
return false;
|
|
#endif
|
|
|
|
#if defined(CONFIG_ARCH_UNIPHIER) && !defined(CONFIG_ARM64) && \
|
|
defined(CONFIG_SPL_BUILD)
|
|
/*
|
|
* For UniPhier ARMv7 SoCs, the stack is allocated in the locked ways
|
|
* of L2, which is unreachable from the DMA engine.
|
|
*/
|
|
if (addr < CONFIG_SPL_STACK)
|
|
return false;
|
|
#endif
|
|
|
|
return true;
|
|
}
|
|
|
|
int tmio_sd_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
struct tmio_sd_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
u32 tmp;
|
|
|
|
if (tmio_sd_readl(priv, TMIO_SD_INFO2) & TMIO_SD_INFO2_CBSY) {
|
|
dev_err(dev, "command busy\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* clear all status flags */
|
|
tmio_sd_writel(priv, 0, TMIO_SD_INFO1);
|
|
tmio_sd_writel(priv, 0, TMIO_SD_INFO2);
|
|
|
|
/* disable DMA once */
|
|
tmp = tmio_sd_readl(priv, TMIO_SD_EXTMODE);
|
|
tmp &= ~TMIO_SD_EXTMODE_DMA_EN;
|
|
tmio_sd_writel(priv, tmp, TMIO_SD_EXTMODE);
|
|
|
|
tmio_sd_writel(priv, cmd->cmdarg, TMIO_SD_ARG);
|
|
|
|
tmp = cmd->cmdidx;
|
|
|
|
if (data) {
|
|
tmio_sd_writel(priv, data->blocksize, TMIO_SD_SIZE);
|
|
tmio_sd_writel(priv, data->blocks, TMIO_SD_SECCNT);
|
|
|
|
/* Do not send CMD12 automatically */
|
|
tmp |= TMIO_SD_CMD_NOSTOP | TMIO_SD_CMD_DATA;
|
|
|
|
if (data->blocks > 1)
|
|
tmp |= TMIO_SD_CMD_MULTI;
|
|
|
|
if (data->flags & MMC_DATA_READ)
|
|
tmp |= TMIO_SD_CMD_RD;
|
|
}
|
|
|
|
/*
|
|
* Do not use the response type auto-detection on this hardware.
|
|
* CMD8, for example, has different response types on SD and eMMC,
|
|
* while this controller always assumes the response type for SD.
|
|
* Set the response type manually.
|
|
*/
|
|
switch (cmd->resp_type) {
|
|
case MMC_RSP_NONE:
|
|
tmp |= TMIO_SD_CMD_RSP_NONE;
|
|
break;
|
|
case MMC_RSP_R1:
|
|
tmp |= TMIO_SD_CMD_RSP_R1;
|
|
break;
|
|
case MMC_RSP_R1b:
|
|
tmp |= TMIO_SD_CMD_RSP_R1B;
|
|
break;
|
|
case MMC_RSP_R2:
|
|
tmp |= TMIO_SD_CMD_RSP_R2;
|
|
break;
|
|
case MMC_RSP_R3:
|
|
tmp |= TMIO_SD_CMD_RSP_R3;
|
|
break;
|
|
default:
|
|
dev_err(dev, "unknown response type\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_dbg(dev, "sending CMD%d (SD_CMD=%08x, SD_ARG=%08x)\n",
|
|
cmd->cmdidx, tmp, cmd->cmdarg);
|
|
tmio_sd_writel(priv, tmp, TMIO_SD_CMD);
|
|
|
|
ret = tmio_sd_wait_for_irq(dev, cmd, TMIO_SD_INFO1,
|
|
TMIO_SD_INFO1_RSP);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (cmd->resp_type & MMC_RSP_136) {
|
|
u32 rsp_127_104 = tmio_sd_readl(priv, TMIO_SD_RSP76);
|
|
u32 rsp_103_72 = tmio_sd_readl(priv, TMIO_SD_RSP54);
|
|
u32 rsp_71_40 = tmio_sd_readl(priv, TMIO_SD_RSP32);
|
|
u32 rsp_39_8 = tmio_sd_readl(priv, TMIO_SD_RSP10);
|
|
|
|
cmd->response[0] = ((rsp_127_104 & 0x00ffffff) << 8) |
|
|
((rsp_103_72 & 0xff000000) >> 24);
|
|
cmd->response[1] = ((rsp_103_72 & 0x00ffffff) << 8) |
|
|
((rsp_71_40 & 0xff000000) >> 24);
|
|
cmd->response[2] = ((rsp_71_40 & 0x00ffffff) << 8) |
|
|
((rsp_39_8 & 0xff000000) >> 24);
|
|
cmd->response[3] = (rsp_39_8 & 0xffffff) << 8;
|
|
} else {
|
|
/* bit 39-8 */
|
|
cmd->response[0] = tmio_sd_readl(priv, TMIO_SD_RSP10);
|
|
}
|
|
|
|
if (data) {
|
|
/* use DMA if the HW supports it and the buffer is aligned */
|
|
if (priv->caps & TMIO_SD_CAP_DMA_INTERNAL &&
|
|
tmio_sd_addr_is_dmaable(data))
|
|
ret = tmio_sd_dma_xfer(dev, data);
|
|
else
|
|
ret = tmio_sd_pio_xfer(dev, cmd, data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = tmio_sd_wait_for_irq(dev, cmd, TMIO_SD_INFO1,
|
|
TMIO_SD_INFO1_CMP);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return tmio_sd_wait_for_irq(dev, cmd, TMIO_SD_INFO2,
|
|
TMIO_SD_INFO2_SCLKDIVEN);
|
|
}
|
|
|
|
static int tmio_sd_set_bus_width(struct tmio_sd_priv *priv,
|
|
struct mmc *mmc)
|
|
{
|
|
u32 val, tmp;
|
|
|
|
switch (mmc->bus_width) {
|
|
case 0:
|
|
case 1:
|
|
val = TMIO_SD_OPTION_WIDTH_1;
|
|
break;
|
|
case 4:
|
|
val = TMIO_SD_OPTION_WIDTH_4;
|
|
break;
|
|
case 8:
|
|
val = TMIO_SD_OPTION_WIDTH_8;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
tmp = tmio_sd_readl(priv, TMIO_SD_OPTION);
|
|
tmp &= ~TMIO_SD_OPTION_WIDTH_MASK;
|
|
tmp |= val;
|
|
tmio_sd_writel(priv, tmp, TMIO_SD_OPTION);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tmio_sd_set_ddr_mode(struct tmio_sd_priv *priv,
|
|
struct mmc *mmc)
|
|
{
|
|
u32 tmp;
|
|
|
|
tmp = tmio_sd_readl(priv, TMIO_SD_IF_MODE);
|
|
if (mmc->ddr_mode)
|
|
tmp |= TMIO_SD_IF_MODE_DDR;
|
|
else
|
|
tmp &= ~TMIO_SD_IF_MODE_DDR;
|
|
tmio_sd_writel(priv, tmp, TMIO_SD_IF_MODE);
|
|
}
|
|
|
|
static ulong tmio_sd_clk_get_rate(struct tmio_sd_priv *priv)
|
|
{
|
|
return priv->clk_get_rate(priv);
|
|
}
|
|
|
|
static void tmio_sd_set_clk_rate(struct tmio_sd_priv *priv, struct mmc *mmc)
|
|
{
|
|
unsigned int divisor;
|
|
u32 tmp, val = 0;
|
|
ulong mclk;
|
|
|
|
if (mmc->clock) {
|
|
mclk = tmio_sd_clk_get_rate(priv);
|
|
|
|
divisor = DIV_ROUND_UP(mclk, mmc->clock);
|
|
|
|
/* Do not set divider to 0xff in DDR mode */
|
|
if (mmc->ddr_mode && (divisor == 1))
|
|
divisor = 2;
|
|
|
|
if (divisor <= 1)
|
|
val = (priv->caps & TMIO_SD_CAP_RCAR) ?
|
|
TMIO_SD_CLKCTL_RCAR_DIV1 : TMIO_SD_CLKCTL_DIV1;
|
|
else if (divisor <= 2)
|
|
val = TMIO_SD_CLKCTL_DIV2;
|
|
else if (divisor <= 4)
|
|
val = TMIO_SD_CLKCTL_DIV4;
|
|
else if (divisor <= 8)
|
|
val = TMIO_SD_CLKCTL_DIV8;
|
|
else if (divisor <= 16)
|
|
val = TMIO_SD_CLKCTL_DIV16;
|
|
else if (divisor <= 32)
|
|
val = TMIO_SD_CLKCTL_DIV32;
|
|
else if (divisor <= 64)
|
|
val = TMIO_SD_CLKCTL_DIV64;
|
|
else if (divisor <= 128)
|
|
val = TMIO_SD_CLKCTL_DIV128;
|
|
else if (divisor <= 256)
|
|
val = TMIO_SD_CLKCTL_DIV256;
|
|
else if (divisor <= 512 || !(priv->caps & TMIO_SD_CAP_DIV1024))
|
|
val = TMIO_SD_CLKCTL_DIV512;
|
|
else
|
|
val = TMIO_SD_CLKCTL_DIV1024;
|
|
}
|
|
|
|
tmp = tmio_sd_readl(priv, TMIO_SD_CLKCTL);
|
|
if (mmc->clock &&
|
|
!((tmp & TMIO_SD_CLKCTL_SCLKEN) &&
|
|
((tmp & TMIO_SD_CLKCTL_DIV_MASK) == val))) {
|
|
/*
|
|
* Stop the clock before changing its rate
|
|
* to avoid a glitch signal
|
|
*/
|
|
tmp &= ~TMIO_SD_CLKCTL_SCLKEN;
|
|
tmio_sd_writel(priv, tmp, TMIO_SD_CLKCTL);
|
|
|
|
/* Change the clock rate. */
|
|
tmp &= ~TMIO_SD_CLKCTL_DIV_MASK;
|
|
tmp |= val;
|
|
}
|
|
|
|
/* Enable or Disable the clock */
|
|
if (mmc->clk_disable) {
|
|
tmp |= TMIO_SD_CLKCTL_OFFEN;
|
|
tmp &= ~TMIO_SD_CLKCTL_SCLKEN;
|
|
} else {
|
|
tmp &= ~TMIO_SD_CLKCTL_OFFEN;
|
|
tmp |= TMIO_SD_CLKCTL_SCLKEN;
|
|
}
|
|
|
|
tmio_sd_writel(priv, tmp, TMIO_SD_CLKCTL);
|
|
|
|
udelay(1000);
|
|
}
|
|
|
|
static void tmio_sd_set_pins(struct udevice *dev)
|
|
{
|
|
__maybe_unused struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
|
|
#ifdef CONFIG_DM_REGULATOR
|
|
struct tmio_sd_priv *priv = dev_get_priv(dev);
|
|
|
|
if (priv->vqmmc_dev) {
|
|
if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180)
|
|
regulator_set_value(priv->vqmmc_dev, 1800000);
|
|
else
|
|
regulator_set_value(priv->vqmmc_dev, 3300000);
|
|
regulator_set_enable(priv->vqmmc_dev, true);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PINCTRL
|
|
if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180)
|
|
pinctrl_select_state(dev, "state_uhs");
|
|
else
|
|
pinctrl_select_state(dev, "default");
|
|
#endif
|
|
}
|
|
|
|
int tmio_sd_set_ios(struct udevice *dev)
|
|
{
|
|
struct tmio_sd_priv *priv = dev_get_priv(dev);
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
int ret;
|
|
|
|
dev_dbg(dev, "clock %uHz, DDRmode %d, width %u\n",
|
|
mmc->clock, mmc->ddr_mode, mmc->bus_width);
|
|
|
|
tmio_sd_set_clk_rate(priv, mmc);
|
|
ret = tmio_sd_set_bus_width(priv, mmc);
|
|
if (ret)
|
|
return ret;
|
|
tmio_sd_set_ddr_mode(priv, mmc);
|
|
tmio_sd_set_pins(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int tmio_sd_get_cd(struct udevice *dev)
|
|
{
|
|
struct tmio_sd_priv *priv = dev_get_priv(dev);
|
|
|
|
if (priv->caps & TMIO_SD_CAP_NONREMOVABLE)
|
|
return 1;
|
|
|
|
return !!(tmio_sd_readl(priv, TMIO_SD_INFO1) &
|
|
TMIO_SD_INFO1_CD);
|
|
}
|
|
|
|
static void tmio_sd_host_init(struct tmio_sd_priv *priv)
|
|
{
|
|
u32 tmp;
|
|
|
|
/* soft reset of the host */
|
|
tmp = tmio_sd_readl(priv, TMIO_SD_SOFT_RST);
|
|
tmp &= ~TMIO_SD_SOFT_RST_RSTX;
|
|
tmio_sd_writel(priv, tmp, TMIO_SD_SOFT_RST);
|
|
tmp |= TMIO_SD_SOFT_RST_RSTX;
|
|
tmio_sd_writel(priv, tmp, TMIO_SD_SOFT_RST);
|
|
|
|
/* FIXME: implement eMMC hw_reset */
|
|
|
|
tmio_sd_writel(priv, TMIO_SD_STOP_SEC, TMIO_SD_STOP);
|
|
|
|
/*
|
|
* Connected to 32bit AXI.
|
|
* This register dropped backward compatibility at version 0x10.
|
|
* Write an appropriate value depending on the IP version.
|
|
*/
|
|
if (priv->version >= 0x10) {
|
|
if (priv->caps & TMIO_SD_CAP_64BIT)
|
|
tmio_sd_writel(priv, 0x000, TMIO_SD_HOST_MODE);
|
|
else
|
|
tmio_sd_writel(priv, 0x101, TMIO_SD_HOST_MODE);
|
|
} else {
|
|
tmio_sd_writel(priv, 0x0, TMIO_SD_HOST_MODE);
|
|
}
|
|
|
|
if (priv->caps & TMIO_SD_CAP_DMA_INTERNAL) {
|
|
tmp = tmio_sd_readl(priv, TMIO_SD_DMA_MODE);
|
|
tmp |= TMIO_SD_DMA_MODE_ADDR_INC;
|
|
tmio_sd_writel(priv, tmp, TMIO_SD_DMA_MODE);
|
|
}
|
|
}
|
|
|
|
int tmio_sd_bind(struct udevice *dev)
|
|
{
|
|
struct tmio_sd_plat *plat = dev_get_platdata(dev);
|
|
|
|
return mmc_bind(dev, &plat->mmc, &plat->cfg);
|
|
}
|
|
|
|
int tmio_sd_probe(struct udevice *dev, u32 quirks)
|
|
{
|
|
struct tmio_sd_plat *plat = dev_get_platdata(dev);
|
|
struct tmio_sd_priv *priv = dev_get_priv(dev);
|
|
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
|
|
fdt_addr_t base;
|
|
ulong mclk;
|
|
int ret;
|
|
|
|
base = devfdt_get_addr(dev);
|
|
if (base == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
priv->regbase = devm_ioremap(dev, base, SZ_2K);
|
|
if (!priv->regbase)
|
|
return -ENOMEM;
|
|
|
|
#ifdef CONFIG_DM_REGULATOR
|
|
device_get_supply_regulator(dev, "vqmmc-supply", &priv->vqmmc_dev);
|
|
if (priv->vqmmc_dev)
|
|
regulator_set_value(priv->vqmmc_dev, 3300000);
|
|
#endif
|
|
|
|
ret = mmc_of_parse(dev, &plat->cfg);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to parse host caps\n");
|
|
return ret;
|
|
}
|
|
|
|
plat->cfg.name = dev->name;
|
|
plat->cfg.host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
|
|
|
|
if (quirks)
|
|
priv->caps = quirks;
|
|
|
|
priv->version = tmio_sd_readl(priv, TMIO_SD_VERSION) &
|
|
TMIO_SD_VERSION_IP;
|
|
dev_dbg(dev, "version %x\n", priv->version);
|
|
if (priv->version >= 0x10) {
|
|
priv->caps |= TMIO_SD_CAP_DMA_INTERNAL;
|
|
priv->caps |= TMIO_SD_CAP_DIV1024;
|
|
}
|
|
|
|
if (fdt_get_property(gd->fdt_blob, dev_of_offset(dev), "non-removable",
|
|
NULL))
|
|
priv->caps |= TMIO_SD_CAP_NONREMOVABLE;
|
|
|
|
tmio_sd_host_init(priv);
|
|
|
|
mclk = tmio_sd_clk_get_rate(priv);
|
|
|
|
plat->cfg.voltages = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
plat->cfg.f_min = mclk /
|
|
(priv->caps & TMIO_SD_CAP_DIV1024 ? 1024 : 512);
|
|
plat->cfg.f_max = mclk;
|
|
if (quirks & TMIO_SD_CAP_16BIT)
|
|
plat->cfg.b_max = U16_MAX; /* max value of TMIO_SD_SECCNT */
|
|
else
|
|
plat->cfg.b_max = U32_MAX; /* max value of TMIO_SD_SECCNT */
|
|
|
|
upriv->mmc = &plat->mmc;
|
|
|
|
return 0;
|
|
}
|