Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-12 16:07:30 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/ronetix/imx8mq-cm
History
Ilko Iliev 7666cccf4f ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM 
Supported peripherals: Ethernet, eMMC, Serial.

U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14
+0200)
Normal Boot
Trying to boot from MMC2

U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200)

CPU:   Freescale i.MX8MQ rev2.1 at 1000 MHz
Reset cause: POR
Model: Ronetix iMX8M-CM SoM
DRAM:  1 GiB
WDT:   Started with servicing (60s timeout)
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Net:
Warning: ethernet@30be0000 (eth0) using random MAC address -
42:0d:e7:78:da:53
eth0: ethernet@30be0000
Hit any key to stop autoboot:  0
u-boot=>

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-02 12:46:54 +02:00
..
imx8mq_cm.c ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM 2021-05-02 12:46:54 +02:00
imximage-8mq-lpddr4.cfg ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM 2021-05-02 12:46:54 +02:00
Kconfig ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM 2021-05-02 12:46:54 +02:00
lpddr4_timing.c ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM 2021-05-02 12:46:54 +02:00
MAINTAINERS ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM 2021-05-02 12:46:54 +02:00
Makefile ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM 2021-05-02 12:46:54 +02:00
README ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM 2021-05-02 12:46:54 +02:00
spl.c ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM 2021-05-02 12:46:54 +02:00

README 

U-Boot for the Ronetix i.MX8MQ-CM board

Quick Start
===========
- Build the ARM Trusted firmware binary
- Get ddr firmware
- Build U-Boot
- Boot

Get and Build the ARM Trusted firmware
======================================
$ git clone https://source.codeaurora.org/external/imx/imx-atf
$ cd imx-atf
$ git checkout imx_4.19.35_1.0.0
$ make PLAT=imx8mq bl31
$ cd ..
$ cp imx-atf/build/imx8mq/release/bl31.bin .

Get the ddr firmware
====================
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin
$ chmod +x firmware-imx-8.9.bin
$ ./firmware-imx-8.9.bin
$ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin .

Build U-Boot
============
$ /opt/cross/aarch64-ronetix-linux-9.2/bin/aarch64-ronetix-linux-gnu-
$ make imx8mq_cm_defconfig
$ make

Burn the flash.bin to MicroSD card offset 33KB
==============================================
$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=sync
$sudo dd if=u-boot.itb of=/dev/sd[x] bs=1024 seek=384 conv=sync

Boot
====
Set Boot switch on base board iMX8M-MB to SD boot:
    SW1[8:1]: OFF OFF OFF ON - OFF ON OFF OFF
    SW4[2:1]: OFF OFF
    J4: 1,2 - open; 3,4 - close; 5,6 - open